Photoshop :: How To Best Get Photo Like Result From Printed Image
Mar 28, 2012
I was scanning some old family photos and came across one that isn't an original photo but looks like it was printed on one of those little remembrance cards that are passed out at funerals and it is made up of little dots. The scanned image ends up with a kind of plaid pattern on it because of the dots:
I took a picture with my cell phone and it looks better.I have never tackled anything like this before and was wondering if there is a standard way of improving this kind of picture to look more like a photo.
View 13 Replies
ADVERTISEMENT
Nov 8, 2013
All the JPEG images I have converted from cr2 are grainy. I am converting them by Image Processor.
View 1 Replies
View Related
Oct 12, 2013
How do I correct black lines running horizontally through a printed photo?
View 1 Replies
View Related
Jul 7, 2013
I'm working with a jpg file. I'd like to be able to see how the photo will fit in various printed formats--8x10, 10x14, 12x18, for example, and what cropping, if any, I'd need to perform. How do I do that? And how do I see its current size, given either the horizontal or vertical dimension?
View 2 Replies
View Related
Jun 22, 2012
I have a 825 pixels x 1125 pixels photo, 300 pixels/inch,
making it a size of: 2.75 inches x 3.75 inches.
However when I prepared to print this:
i.e. copying the image and pasting it onto an open office file or microsoft word file
(as I need to safe a file with photos for the printing shop),
the size of the image shows as almost covering an entire A4 sheet.
Why is that and not the set size?
View 2 Replies
View Related
Sep 19, 2013
I have just started using photoshop to develop some designs that are meant to be printed on fabric. And then sewn into dresses..While I know how to change the size and scale of the image and canvas. I can not tell how big or small the objects or different elements in the pattern will be when printed out. For example if I want to have a certain part of the pattern appear on the shoulder of a dress and another on the hem, how do I ensure that they are printed at the right size and in the right place. I tried printing out one pattern on a meter of fabric and it turn out that it was too big and most of the design will be cut in the process of making the dress. I have no way to determine the dimensions. Is there a way where I can place a dress outline over an image to check it out or size the individual items inside?
View 1 Replies
View Related
Oct 10, 2008
For some reason with my Photoshop CS3, the image adjustments; i.e. contrast, brightness, etc. , are completely missing when the image is printed. The image file after saving looks fine on screen in a photo viewer, but when printed, the image reverts back to pre-edited state.
Things like cropping,color and transforming carry over , but the image adjustments don't . This is really strange, you would think that once an edited image was saved, all the changes to it are now permanent no matter what form it's displayed.
How is printing the image reversing the image adjustment editing to the file? Is there some kind of setting that it's in thats making it do this?
View 1 Replies
View Related
Feb 21, 2012
I am running PS CS5.5 on a a MAC running OSX 10.7.3 and printing to an Epson Stylus Photo 2200.
Background:
Basically, the dimensions of a printed graphic are different than the size that is specified in the PS version of the graphic. The amount of error is about 1/16 of an inch over a 6 inch distance. This matters as the printed output must fit a template exactly.
Details:
I create a 300 dpi resolution document. I am using inches as the ruler setting and the method for specifying the size of an object in the Free Transform Dialog. I create, with the rectangle tool, a rectangle and then use command-T to specify the dimensions to be 6 inches X 1 inch. I check using the ruler tool and verify that the shape is 6 X 1. When I print, the object is smaller. In fact, it will be 5 29/32 inches instead of 6 inches.
If I create the same object using Illustrator, the object prints (same printer) exactly the specified dimension. If I place the illustrator object into Photoshop it will "say" that it is 6 inches but prints at the reduced size.
After pulling my hair out, I have just adopted the work-a-round of scaling the output, in the printer dialog, by an appropriate % to compensate. There must be a better way to address this problem.
View 12 Replies
View Related
Sep 18, 2012
How do I reverse an image-it is printed backwards
View 4 Replies
View Related
Jun 10, 2012
I'm working on a job that requires recreating vintage box artwork. This involves recomposing scanned images into a new layout, recreating text from matched fonts - that sort of thing. Unfortunately, some of the scanned images (originally printed offset press in cmyk) were printed with one or more of the plates out of register, creating a halo effect on one side. Can this be corrected in PhotoPaint? Is there a way to create each channel as an object which could be moved to realign the colors and then flattened again?
View 9 Replies
View Related
Jan 10, 2012
I'm having an issue printing to a Panasonic DP-C322 PS printer. I send my image and ask it to print multiple copies. The result is just a single copy of my image. If I use the PCL driver, the image prints in multiples, as expected.
View 1 Replies
View Related
Jul 12, 2013
Tried the same image printed using corel and Photoshop. same setup: let software handle color, color off in printer, same profiles and settings otherwise. the corel print is a bit darker and some colors are slightly different than the same image printed thru Photoshop.
I usually print designs created in corel as there is added text and graphic elements. Can't print those using PS. just odd there is noticeable color variations.
View 4 Replies
View Related
Oct 19, 2013
When printing in Orgnizer in Elements 11 the printout is as selected,but in Editor the image in Portrait format is always printed out smaller than selected e.g 15 x 10 cm image prints out as 10 x 9 cm. There is no 'Print Preview' facility available
View 5 Replies
View Related
Dec 10, 2011
I have a 2D image and I have the opportunity to get this image printed as a 3D model. To do this however, I of course need a VERY SIMPLE 3D model made. I attached the photo. How to make this for me really really simple? I have tried and tried, to no avail. The image is a logo for a non-profit organization that I head.
View 9 Replies
View Related
Jun 12, 2013
I am using Lightroom 4.4 and an Epson 3880 with printer driver ver. 6.6. I want to print a 16 x 20 image on 17 x 22 paper. I select a paper size of 17 x 22, and in the Lightroom print module, I set the margins to zero, and the cell size to height=16 and width=20. I turn on the ruler guide, and it shows that I will get a 16x20 image on the paper. However, when I print it, the image is about 3/8" larger than that in both dimensions.
View 5 Replies
View Related
Nov 28, 2011
Printed some rectangle that are 7.5 x 14.5 inches wide on the corel page on the monitor, but they did not actually print 7.5, they were about 1/4 inch smaller! the 14.5 dimension was fine. got to measuring other images I have printed and some are perfect, some are off.
View 1 Replies
View Related
Mar 16, 2012
Can the pictures file name be printed directly on to each image so that a preview book could be printed by Blurb with each photograph numbered.I can do this in slideshow but when I export the files for printing the numbers are gone.Several of my friend in the profession would also like the ability to apply the file names in this way.
View 1 Replies
View Related
Aug 17, 2012
Is it possible to either print or save an image that shows the crop lines from Lightroom (i.e. shows what is both in AND out of the image as it is cropped). I'm working off a scanned negative and I want to show my printer just how to crop the image. She was hoping to see both what's inside and outside the crop? Possible to get that to her either by printing that from my computer or emailing it to her?
View 1 Replies
View Related
Mar 24, 2012
most of my crops are set for custom. i want an 8x10 print. if i change the aspect ratio from custom to 4.5/8x10 it screws up my crop completely. that means that i cannot upload to an online website, be printed automatically and have it come out the way it want. but can that custom crop image be printed 8x10 manually?
View 2 Replies
View Related
Dec 18, 2013
So I couldn't think of a better place to put this. I have something that I'm thinking of having professionally printed. What are the steps I should take to make sure I produce a high quality image? File format, Dpi and so forth. Make a list of steps to creating a high quality image file that will look good printed from a print shop.
View 5 Replies
View Related
Jun 22, 2012
I want to enlarge an image on a digital photo and save the enlarged image as a seperate photo
View 5 Replies
View Related
May 12, 2012
I am trying to open a photo in camera raw and the image always has a lot of red and blue in the picture? What can I do to avoid this. When I first started learning photoshop this did not happen?
View 5 Replies
View Related
Jan 14, 2014
I did use the scissors and eraser tool to cutout unwanted background, and now I have an image I want to save and copy to another photo. The problem is that Elements 11 won't let me open up another photo at the same time, or let me copy the selected image to clipboard to paste on a different photo.
View 1 Replies
View Related
Aug 9, 2007
I really like how this picture came out and I was wondering how I could get a similar aspect?
I know you can play with curves, levels, and saturation but I'm sure its more then that ..
View 3 Replies
View Related
Jun 12, 2012
I have 4 panels up on the screen and I want to end up with a jpg that has all four panels. How do I do that?
View 3 Replies
View Related
Mar 22, 2013
In CS3 I use a Dust & Scratches filter on a layer in a high resolution (3200+ppi) 16bpc image, then traditionally change the layer blend mode to Difference, make a duplicate of a channel which has the clearest information of where the filtered changes were made, and use levels to increase the contrast on a copy of that channel. Occasionally I get this result though - the Levels adjustment preview shows spots clearly, but clicking OK results in something very different from the preview. This only seems to happen occasionally.and result looks like this:
As the purpose of the channel is to make a mask, the result isn't as good as I'd like. I assumed that the problem might have been the grey starting colour of the channel, so I pushed the 0 up to 9 in an attempt to get a uniform K value of 100% on the darkest areas, and then ran a second Levels adjustment to make the white spots brighter. The second levels adjustment resulted in pretty much the same result as above, again, not what was shown in the preview. I also assumed that it may be down to numbers and that levels is occasionally too limited to deal with all the shades of grey on a 16 bit channel. Probably wrongly as this normally works exactly as required.
This only happens occasionally, and isn't that big a deal - I can quite happily go and use a Curve instead. I'm just wondering why the preview in the adjustment window is different from the actual result. The fact that it only happens on some of my images is what concerns me - purging all beforehand does not make any difference.how to get accurate results in the preview? Is the preview using a different method to show the results? Unfortunately I won't have a copy of CS6 to try this on until a couple of weeks from now, so not sure the best way for someone to try and replicate it on newer versions.
View 6 Replies
View Related
Mar 1, 2013
Is there a way to see the end result of a pattern as you are creating it?
That is a way so you can see the pattern tiled all over the document. So say you are working on a 100x100 area to be the pattern in layer 1, but you want to see this replicated over an entire document. Maybe you have an overall image/document that is 800x600 say, and you work on the 100x100 area in a layer. Anyway some way of doing is so that when you make a small change in the 100x100 area of the layer you're using for the patter creation, you immdiately see the replicated result of the 800x600 area.
View 1 Replies
View Related
Oct 14, 2012
I'm using CS5 and beginning to use HDR. When I merge to HDR pro and make adjustments to images the preview window is extremely different from the final image. I'm merging original camera raw images from a Nikon D200. Workflow in ACR is set to 16bit. Output from HDR pro is also 16bit. I adjust using the preview window, but after final processing the resulting image is grossly different, much more saturated and more vibrant among other differences.
View 2 Replies
View Related
Apr 25, 2013
Scaling on a pattern layer sucks. When you scale a layer up or down (anything other than 100%), the end result is blurry and ugly. Here's an example: URL....
I would love to be able to choose the scaling algorithm used. In this case, the raster layer was scaled down with a bicubic algorithm, which worked fine for it.
View 1 Replies
View Related
Dec 12, 2012
I've recently tried using the Photoshop HDR feature. I have selected three different exposures in Lightroom and chose to merge them as an HDR image. All went well until the preview. I've found some settings that work really well. I've decided to go for the 16-bit path, not using Lightroom's 32-bit image capability, and let Photoshop do the tone mapping for now.
Here's what my preview image and the entire tool window looks like: [URL]
And this is the result one step later. It's totally over-saturated and has other merge errors. It basically doesn't even look similar to the preview. What's the preview good for if it doesn't show what I'll get? How should I decide what setting works good if I can't see it? [URL]
This is Photoshop CS6 x64 on Windows 7 SP1. The source images are 16-bit TIFFs as they were exported by Lightroom.
View 1 Replies
View Related
Jun 13, 2006
I cut with the pen tool. The path was not complicated and had many straight edges to follow, so I didn't have to click many points. After I completed and closed the path, I sel the icon, load path as selection and then the path became this bizarre zig zag, almost electric marching ants effect. Then I deselected and there were like hundreds of anchor points at every centimeter or so. The edges of the selected area however were normal and smooth.
View 9 Replies
View Related
