I am using an image for floor in a 3D model. In the render you can see the repeating pattern of uneven brightness from 1 side to the other. Is there a technique that will even out the brightness across the image left to right or up and down.
View 6 Replies
When i started my assembly, i could see all of my textures. Today, it is so bright that i cant even see any shadows. doesn't matter which view i have, i cannot see the texture. there is a glimpse of it when i look iso view but that is it. I have tried altering the styles to reduce the brightness down completely but it has no affect. if i open another assembly file and place the same part, i can see the texture perfectly.
How can i change it back so when i look from the front, i can see the wood grain laminate that i am supposed to see. i have attached 2 images. the white one is supposed to be a brown wood grain laminate that is shown in the other image. both images where using the same style with the same setting and are the same material.
Ive tried downloading some brush sets and applying them in PS. The only problem is that the edges of the brushes look blurred when the sizes are increased and are no way as sharp as on the examples attached.
The pixelated blocks of colour and edges of the photos are so sharp they could be bitmapped?
Could these kind of effects be created in an image/border effect program ie something like Extensis Photo Frame?
I've recently gone on to Photoshop 7 from Photoshop 4. Photo images appear much darker (photographically speaking about a stop) than they did in P4, or in my batch browsers or in trial versions of Elements or paint Shop Pro that I have tried. It only seems to apply to P7. I can't find a way of altering this without messing up the display settings.
View 1 Replies View RelatedI have Photoshop 7 installed and it's been working fine.
However all of a sudden i started having problems with the way PS opens images.
Say I take a picture with a camera, review it in Irfanview, and the decide to play with it in PS. The problem is, that the image look different in PS, than it looks in reality. I simply drag and drop the image from the folder into photoshop, and when it opens up, it's a lot brighter than the original, almost washed out.
Sample attached.
Does anyone know what the problem could be? It wasn't doing it before, it started suddenly, without any modifications to PS or the system (that I know of). I've tried reinstalling PS but no help.
why my images in bridge CS4 look much lighter than in the Finder and photo developping software PSE 8 for MAC and in Silkypix (Panasonic) and Digital Photo Professional (Cannon)?
View 7 Replies View Relatedlooking at the image plane and the 2 inputs I used - diffuse / opacity (alpha channel), what parameters are the best way to adjust the image plane brightness / contrast / levels (photoshop style)?
That’s what I like about these forums. A great way to get straight to the point and learn stuff fast.
The LR4 Print module has the ability to apply a brightness correction to data being sent to a printer to compensate for having a too-bright monitor. That's fine. Now, if I use the same images in the Book module to be sent to Blurb, must I create Virtual Copies of each image and manually increase the Exposure of each image to achieve the same effect. I would think that if I do not do this, the pictures in the book would appear dark just as my printer pictures appear dark if I didn't apply a correction.
View 1 Replies View RelatedWhen I export an image it apears slightly less bright outside of Lightroon than it does in Lightroom. This includes web browsers. Am using identically calibrated NEC 2090uxi monitors. Most of the time upping the birghtness by +5-10 will correct this. Occasionally the vibrance needs to be raised in addition. What might account for this?
View 2 Replies View RelatedI'm importing RAW files straight from a CF card reader into my network storage drive via LR5.3. While reviewing as it imports initially each image looks great but a few seconds after it loads onto the screen it seems like LR applies a bit of extra brightness and lessens the contrast and I lose a load of detail that was there originally. I've not touched the import settings and no filters are being applied by myself on import.
View 5 Replies View RelatedI am able to change the brightness/contrast for part of an image by using, for example, the Rectangle Select tool. I want to be a little trickier though. I would like to use the rectangle select tool, but have the effect of the brightness/contrast apply 100% at the bottom of the rectangle and say 10% at the top, with gradations from 100 to 10 from bottom to top. Is this possible?
View 3 Replies View Related If I'm creating a batch "text" for a number of files the strangest thing happens. I have to change 10 files all with the same or very close to the same pixel size. In this case 1024Lx . I want to insert a "copyright" text across the image. I create the action, that includes: text, text size of18pts and opacity. and then batch.
The resulting font sizes are very uneven. They are all show up in the individual files as 18 pt but some are invisiblley small some are gigantically large and some are just right. And my name's not Goldilocks. I've tried this on PS3 and PS6 with the same results.
I want to crop the shrubbery out of the top of the attached photo. Also, I want the area that I crop to be transparent so I can paste the empty tomb photo on top of another photo.
View 1 Replies View RelatedI've created a curved path and am having probs creating an even line using the Stroke Path tool. For some reason, the line gest heavier in places and I just want an even smooth thin line. I've tried using the brush and the pencil tools... screengrabs below. Would really appreciate any advice. Thanks! Mo The path: Stroke with the brush tool Stroke with the pencil tool: My brush settings:
View 2 Replies View RelatedI got Photoshop CS6 Extended recently, but the lines I draw in it aren't smooth, like they should be (example below). The tablet produces perfect lines in any other bit of software (Flash, ToonBoom, etc.), but not Photoshop.
I've tried lots of different solutions (uninstalling and reinstalling it, reverting back to an earlier driver, clearing preferences, etc.), to no avail. Oddly, my Intuos3 works fine in Photoshop, for a few minutes, before it crashes. If I try to adjust the Wacom Tablet Properties for CS6, it doesn't recognize any changes, but if I adjust the settings for Photoshop CS4, it does. All Wacom Drivers are up-to-date.
I am using a Mac, photoshop CS5
Â
I created a path with Curves with the pen tool.filled it in with a color light blue.than I use the paint bucket to change it to dark blue.This is when the curved lines become jagged, not smooth, uneven.
I'm using Photoshop CS6, but I've confirmed that this happens on CS4, CS5 and CS5.1 too.
Â
When I create a shape (say a simple triangle or such, using the various Shape tools), then apply a large (40px) Stroke Layer Effect to it, the corners of the stroke aren't smooth - they're stepped/jagged.
Â
Note how the corners of the stroke aren't perfectly curved, but are made up of noticeable straight lines. The document you're seeing is being viewed at 100%, by the way. The stroke is set to Outside, and is 40px in size.
Â
I'm aware of the new native strokes for vector shapes in CS6, and they don't have the problem, but in a certain project I need to combine both the native vector strokes and also the stroke layer effect, so I can't simply use the native strokes instead.
Â
I'm also aware that I could use an Illustrator Smart Object with a pre-applied stroke, but that doesn't address whether this behaviour in Photoshop is broken or not.
Â
It's been suggested to me that this problem arises because Photoshop applies the stroke layer effect to the rendered bitmap of the layer, not to the vector shape itself, and that's why the problem has persisted for several versions of CS.
Sometimes Photoshop automatically change my font sizes to uneven numbers. For instance 12 pt changes to 11,98 pt. Why and what could be done to avoid this? Also XY positions of objects in Illustrator get changed to sligtly different numbers like 9,98 px.
View 5 Replies View RelatedI've got an urgent fix to do for some CD artwork, sadly I am far from being a photoshop guru and I don't have time to send it back and get it redone.
Basically, I have a load of text spiraling inwards towards the center of the disk but it ends up a bit too close to the center. I need to enlarge the hole in the middle without distorting the text too much.
My first thought was to try the Filter/Distort/Spherize effect and indeed this does make the hole proportionally bigger but it also makes the text near the edge much smaller than the text near the center.
I need some kind of radial or spiral transform/distortion that will maintain the proportion of the lettering, although roughly would be fine, it doesn't need enlarging very much.
I am using photoshop 7,
i want to detach the half of the polygons of a uneven terrain in max... the problem is when i select the polygons i want and cilck detach the normals of the detached edges become split. Is there a method of detaching polygons which preserves normal orientation.
View 5 Replies View RelatedIs there a way to achieve uneven distrubution of blended lines in Illustrator CS5? There was one other post on the web asking a similar question to this, which was solved by changing the blend spline.
Â
This works great for objects, but not so much for lines.
Â
Here is an example of what I am looking for where the top is what I would like to achieve and the bottom is the typical blend.
I have been having problems with uneven stroke borders on my images. If I select say, a 2px border, three sides of my image will have a 2px border while one side will have what appears to be a 4px border. Is this a known LR problem, or is it printer driver related ? Using LR 2.2 and printing on an Epson 3800, latest driver.
View 9 Replies View RelatedWhat do you think you be the right way to make a surface rough and uneven, as in the picture below? Or should it be done at some later stage?
View 6 Replies View RelatedI hurriedly photographed the text in a greeting card and have uneven lighting and underexposure that I'd like to correct. Please see attachment, in which I've increased the brightness and contrast and then desaturated.
I've looked at tutorials on gradient contrast masks but I get lost part way through. Either I'm too much of a newbie to understand (highly probable) or maybe the tutorials are for older versions of GIMP. (I'm on 2.8.6 for Windows.)
I have a path that is stroked 2 pt black. The full path is there but the stroke is random along the path. I do not have a dashed line selected.
View 6 Replies View RelatedI have created a color gradient and the color fill has an uneven edge, which creates a small white space between the edges of the fill and the bounding box. I have tried using shift+click to try and even the edges, but I guess that only works for using stroke tool or whatever. You have to look closely because this image is not very large. There is a slight uneveness on both the top (near the right side) and bottom (slightly left of center).
View 14 Replies View RelatedI have a fabulous image of a painter's palette: [URL]
Â
I want to show only parts of this image at a time, so that the viewer sees it in increments. However, I want to make the edges look more organic, like brush strokes, so that it looks almost as though the painting is being completed and the viewer gets to see the process.
Â
p.s. I'm in CS2, unfortunately, so the bristle brush isn't an options
I'm trying to constrain the green cylinder to move between the red frame. The red cylinder is constrained on the surface of the larger gray cylinder, which moves around the grounded red frame. When the green cylinder goes up hill/down hill the larger gray cylinder is supposed to rotate around its own axis.Â
When I choose transitional constraint I'm only able to pick one face on the red frame, and not the whole face. I think it's because the face is not planar, but varies in z-led.Â
Neither am I able to use the Contact Solver, it seems like the friction is too high. The green cylinder doesn't slide that well when using Contact Solver.Â
I open a picture with PH CS3 and the image is dark, but in the computer, it is way lighter and if I print, it is lighter.
View 36 Replies View Relatedi open up an image in photoshop 7.0, it looks very very dark... (darker than the original colour). But if i open it up in imageready or other image programs, or even Internet explorer, the image looks normal again.
there's something wrong with the viewing settings of my Photoshop? i tried reinstalling but it's the same.
Developing a site for a client and i'm dumping some png's into Flash. The client reports that the images appear lighter then what he'd seen in the comps I'd provided (PSD's). I check it out and he's right! the .png's are noticably lighter than the psd versions. Why are the png's brightness changed when you save it out of PS?
i'm saving as png-24 in 'save for web'.
Is there anyway to correctly save a png and maintain brightness?
