I have a .jpg image (just a plain flat image, no layers) which mostly consists of text and one small image; I need to lift the text and the image from the background so I can change the background color, then put the text back again.
View 9 Replies
I want to lift image from photo and then do transparent background.
Is there any knack of selecting the item from the image cleanly. In my case its a dog. I use the lasso to go around the object but that leaves a 2mm space where the background shows through.
(Is there a way to use the lasso to make a partial selection then remove your finger from the mouse and then continue your selection from where you left off ?)
After I have Deleted the inverted selection I use the Background remover to remove the remaining 2mm of background around the dog.Again is there a knack to using this tool ? I Googled and it said to keep the removal circule half in and half out of the actual image. Also is ther a correct setting in the menu bar for the BG/removal tool..Im just experimenting.
my settings at this moment are.
size 18
Hardness 100
Step 10
Density 100
Thickness 100
Rotation 0
Opacity 100
Tolarance 75
Sharpness 100
Sampling: Continuous
Limits: Contiguous
Boxes not ticked. Auto tollerance and Use all Layers.
Box ticked: Ignore Lightness.
I wish to cut out/lift the an object from an image to create on a white background .
View 4 Replies View RelatedI have a picture of a toy, I want to lift the toy off the background and leave only white space around it.
Here's what I've accomplished so far:
Created new layer Used the rounded rectangle to isolate the toy inverted the image used the magic wand to crop areas that had to go cropped as close to the toy as possible.Now I have the image but it's on this ugly, bits and pieces left over square.
What I'd like to know is: will making the background transparent fix it?
I'm still playing with it and saw a tutorial on transparency, but each time I attempt to do it - the entire image disappears.
Why is the text size in the instructional boxes "File", "Edit", "Image" etc: so small that they are almost unreadable. I know its me, but I can't figure out how to fix it.
View 2 Replies View RelatedI am trying to fill my text with a texture or image.
Heres my process:
I type my text, select it and click on the "draw inside" button.
I then go to place and select my image.
The image comes tiny with dimensions of x- 430mm and y-340mm.
Obviously when i stretch it out to cover the text, the image becomes blurry. Whats happening here?
This Q must be very old. Why can´t someone invent a sigle button for this I have tried all the things by the book but still when I try to lay text image with white background over an image the white is still there althoug I made it transparent. tried to sa for web as png-8, png-24 and gif. nothing works. To use magic wand gives bad result when applied to text? So what can I do? I am trying to place text over image. I know I could write it over the image but I need the text as a transparent layer some place else.
View 6 Replies View Relatedhow you put an image into the background of text.
I'm trying to do the opposite...I'm trying to cut the text into the shape of the image.
When I try to use the clipping mask with the text over the image, it will not give me the option of the clipping mask. When I put the image over the text it then gives me the option, but cuts the image into the text....
I have a clean image and want the text to cut itself into the image.
I have a banner, and some text. I would like to subtract the text from the banner to create a 'cut-out' effect. What's the easiest way to do this on photoshop?
View 2 Replies View RelatedPhotoshop CS5 am not getting how to cut the text in image and its background color or image remains the same....
View 3 Replies View Relatedif it was indeed possible to remove text from an image with rather detailed background. I'm no stranger to Photoshop and the Adobe Family however I've tried several methods and all of them seem to work but finished result looks obviously doctored...
Here is the image, my client wants the price from the image to vanish, while retaining the background!I have tried myself to accomplish such a result but my attempts at this
How can I type a word on an Image in Ps and change the background of the text box ?
View 1 Replies View RelatedHow do I set fire to text or an image with a transpenent background?
I am building a web site for a client that wants to use colorful backgound.
The client wants fire on all of his mouse over images and text.
I know how to create the fire to the image, but I get white around the image or text.
It looks bad on the color background.
How can you separate the white background from the black text from a scand image?
View 2 Replies View RelatedI have an image. I want to add a solid color strip near the bottom . On top of the strip I want to add text .
Question: what's the best way I can get this strip?
In Photoshop, I would probably just create a new image of the length of the strip and then fill with the color I need and then copy and paste onto the image .
What im trying to find is a tutorial on how to create a lifted paper effect... where an image looks like it has a slight curl on it at one corner - but doesnt actually curl up and around.
View 5 Replies View RelatedI know how to create text with a background picture inside the text. I want to put this text onto another image. So the text with the background inside the letters, will be superimposed on new image.
View 3 Replies View RelatedI'm trying to add text to an image with a background. An example of what I am trying to do is shown in the example photo attached.
View 2 Replies View RelatedAlong the bottom of the screen we want to add one of the text components - which will have a rectangle background and text saying call now and a phone number - then we want to add an image of a phone but we can't get the phone image in front of the text background - it is hiding behind the bar.... it's a bit like you see on the shopping channels with a phone number at the bottom of the screen - but we also want the image of the phone - how can you change the order of how these tracks are laid on top of each other?
View 1 Replies View RelatedI open a new background - 1440 x 600. Then import my image (in new layer) - 1350 x 280.
Now I want to put some text or arrows pointing from the background to the image but I can only write/draw on the imported image not the background. Have tried merging to no effect.
I'm trying to create a picture which has a background image and some text on it.
Since the image has different colors, the textcolor should ajust to the underlying image.
If the image color is dark, the color of the text sould be light or the other way round.
I am trying to save text as an image.
I've typed in the text in the color that I want. I've clicked on the magic wand, clicked on the white space and I get the checkered background. But it also covers my text and then when I try to use the saved image, it's all completely transparent.
How do I do this so that the text shows up, but the background remains transparent?
I need to remove the '.com.au' from this jpeg version of a logo I have to use it for a magazine print file I am working on in indesign. I have opened the file in Illustrator (it is a very large file because it was designed for outdoor sinage.) and I thought I had better ask about the best way to do it without it affecting image or print quality.
View 12 Replies View RelatedI'm using illustrator cs6. i did a smoke text in photoshop and saved it as png-24 file.I wanted to vectorize the smoke text in illustrator.
So i placed the png files and image trace it with high fidelity photo as my preset.
I tried out all the preset,mode and so on,but it changed my smoke effects.That's why i chose high fidelity photo,bt i can't check the ignore white box, i can't remove the background.I tried low colour.but the smoke part become white colour ,obviously when i change the background colour.
Second method that i used was image trace(high fidelity photo)>expand>ungroup>delete the white part..but it doesnt work...
I haven't been doing graphics for a few years and are having trouble getting Xara Extreme to export a small drawing with a transparent background. I am selecting the image in Xara, Export, Save as .png, True color + alpha, Save
The image saves okay but has a white background??
I want to create a collage of small pictures. I would like some of the pictures to be rotated, but not at 90 deg or 180 - at smaller angles off normal. I do not see how to rotate an image by a preselected angle, or rotate on the fly.
As a second question, for the pictures I want to make the background [usually a solid color, white] transparent so I can overlay one object with another.
How do I make just the background fully transparent, without affecting an object?
My text is coming out extremely small, all my settings in character are normal, and the font is not the problem, this has happened before.
View 1 Replies View RelatedAfter Update 2 and Hotfix 1 (I haven't noticed after which of them exactly it happened) some options in X6, when they are active, are receiving some grey-pink background together with the small icon near them - for example Object position, Object size, Angle of rotation and others. You will see them when you select some object.
In the same color are also some items in the menus without obvious principle. I don't think that this is intentional. Or I cannot see it?
I ran some rendereings using revit 2013 , and windows 8 . But everytime I render a view I get a horizontal white area in the background that looks like a white fence.
I attached a rendered view ( draft quality) and a realistic view . you can see the white area in the background in both images.
All of a sudden my text is incredibly small. The resolution is set at 300. The "Resample image" box is unticked. I've tried resetting the character...still the text is smaller than it should be. For example, 8 point Times New Roman can barely be seen with the naked eye. I haven't done anything different. What gives?
View 15 Replies View RelatedI just downloaded Photoshop cc, everything works fine except 1 thing, when i add a text, the size is super duper small, so small you can't even see what letter it is. I tried to max the size to max but nothing happens.
View 1 Replies View Related
