Had problems with left click text edit function not working?
I am using AutoCAD 2011 and I have been always used the Left click double click to edit text and now its not working. Is there a setting I'm not aware of that I can change.
What is difference between Text Tool used for paragraph text with pressing left click mouse in x5 and inserting placeholder text in x6.
View 1 Replies View RelatedI just bought Photoshop CS6 and it seems that it isn't working properly. I run Windows 7. The left click and left alt are not working. The buttons work perfectly on other programs.
View 1 Replies View RelatedMy office has just installed 2012 on a couple of extra machines. Our installs were fine before but for some reason we can't double click to edit text or attributes any more. I've checked MTEXTED = INTERNAL and DBLCLKEDIT = 1 but that's not it. We can type ED or ATTEDIT to edit attributes normally, or MTEDIT to edit mtext but we don't get the normal text formatting bar or ruler. It's just looks like were using the dxtext editor, but it's not dtext.
View 9 Replies View RelatedWe'll I'm not sure what happen here but, I can not for the life of me figure out why the double-click stopped working
PICKFIRST = 1
DOUBLECLICKEDIT=ON
and the Noun/Verb is checked . When I look at the CIVIL CUI, I do not have any double - clicks but the ACAD CUI does - this is load too right.
Every time I double click on single line text it brings up the properties. I have searched online and made the changes to certain toggle settings and still nothing. I'm not doing something right I just can't figure it out. I know "DDEDIT" can do the trick. But, I know double clicking has worked on previous version and I want it to work on my 2013 version.
View 8 Replies View RelatedI use cs2 and when in photoshop when i left click on any of the tools for instance the pen tool it brings up the menu to select pen tool, freeform pen tool, etc.. rather than just selecting it. I am use to having to right click on the the pen tool to get that menu, i was wondering how i would change it back. Same thing happens when i left click on all the tools on the tools menu, just used the pen tool as an example.
View 5 Replies View RelatedSay I am moving a text box with the arrow keys and decide to edit it. To do so, I would have to leave the arrow keys and reach for the mouse to execute the text edit. How do I edit from the keyboard?
View 4 Replies View RelatedFor some reason when I open a drawing and try to edit it, the left mouse button cancels the command.
Example;
Command: line
Specify first point:
Specify next point or [Undo]: *Cancel*
Command: *Cancel*
By default when we left click in AutoCAD and move the mouse, a selection window appears. Something went wrong in my system and now if I left click no selection window is appearing. For selection window to appear I have to drag the mouse instead of just moving it (which is the normal behavior).
View 3 Replies View RelatedIs there a way to create a shortcut for mouse left-click button on the keyboard?
View 8 Replies View RelatedI want to be able to read the left click mouse button coordination all the times . Is it possible ?
View 4 Replies View RelatedCan not click on multiple objects or lines for erase,trim or extend commands. Is there a mode that I have turned on by accident , driver warning also comes up in trim offset command.
View 6 Replies View RelatedI need to mix left to right and right to left (hebrew) text in a textbox. How can I do that? If I copy/paste hebrew text the text is inserted as if it was left to right, that is: reversed. Can I somehow work around that?
View 2 Replies View Relatedi have problem with 3Ds Max 2012. When I go to click on one of my mesh and select and left click the pannel that is soposed to pop up doesnt. I dont know if I locked it some how or if there is a bug.
View 9 Replies View RelatedI still want it to have its normal behavior while in a command, but when not in a command it still enters the selection mode, which does not work, but if it would enter a zoom window command, it might be a more useful command.
View 5 Replies View RelatedI have a tablet and I am trying to change brush size and hardness with the pen but I keep creating new layers. Is there a way to turn this off because I would like it to flow better. With the mouse if I ctrl+alt +left mouse is gives me a new copy of my layer. With the pen I get the pressure/size to come up but it is fickle and mostly just resorts to creating a new layer copy which is what I want to disable so it just does the brush size/hardness option. It seems the left mouse click doesn't display in any keyboard shortcuts.
View 1 Replies View RelatedI'm friends with an individual with disabilities, and it is difficult for him to hold down the left click and move the mouse (in his case, a joystick) at the same time. I was curious if there is a way so that when he presses left click, the brush will continue to "stroke" until he presses left click again.
If not, any software that could accomplish this task?
When holding down the left mouse button in the scroll bar area for just a fraction of a second too long, the scroll bar moves several positions. In the past, it wasn't this touchy. It's so touchy that it's impossible to CONSISTENTLY click once and make the scroll thingy move just one position. In previous versions, it works like a charm. Is there a way to adjust this mouse issue?
I use it on every image for cloning so that I can check one section at a time. For this reason, I've now gone back to CS5, but also because CS6 crashes on me and it sometimes gets stuck on Auto Saving files (possibly because they're big).
I know this problem is really simple, but I just can't seem to get it to work. I should be able to left-click on a layer, hold in the shift key while left-clicking on a layer further down the list to select multiple layers. It doesn't work, I can't even get the (Alt-Left Click) command to work, allowing me to select individual layers.
Both these commands work in Image Ready and Flash just fine.
I have checked the keyboard settings, but I am not really sure what to look for - nothing seems out of the ordinary.
I've been using PS and PSE since 2003 so I'm not what you'd call a new PSE user. I upgraded to PSE9 a few years ago but now I can't get the clone stamp to work correctly. I keep getting black spots on the distracting elements that I want to remove. I've gone through Scott Kelby's PSE9 book a million times but still can't get the tool to work correctly.All I get are the black spots. I'm working on photo submissions and time is running out. Here's what I'm doing.
1) First I select the Clone Stamp tool and then the brush size I want to use (usually around size 45)
2) Then, I sample the area just to the left of the distracting element that I want to remove. (I use Alt + left click)
3) Then I run the tool over the distracting element and left click. But instead of getting my sampled area clone, I get a black spot.
I thought that maybe I was using too big of a brush but that's not the case. So, what the heck am I doing wrong or is there some kind of an update or tool that will allow me to remove distracting elements more easily?
I am using CorelDraw 12, and recently when I try to drag a drawing, I do a left click and drag. But in doing so, depending on how far I move the object, and how long I hold the left click down, it will just continue making duplicate copies of my object. So as I drag the object, it is also copying. I have had to restart my computer to get it to stop, but this is getting old.
how to disable the drag copyiing? Everywhere I have looked, I find that people are right-clicking, so to clarify, this is a left click issue with my mouse.
Since we updated to CC, I have a very good chance of this not working evey time I try it. Maybe 10% of the time, it will select the word/line as it should. My prefs are identical for this feature as they have for the past several version of InDesign. My partner also has trouble with copy/paste in InDesign and Illustrator as well.
View 20 Replies View RelatedWhen i click my mouse to draw the cursor moves up and to the left of the position i started which makes any and all editing impossible. Imagine trying to draw a line but the starting point is a half to a full inch up and to the left of where you wanted the line to start. I've tried a clean install even changed my mouse. doesn't do it it drawx4 only photo-paint x4.
View 14 Replies View RelatedMy friend here at work can't seem to double click on anything to edit it. If he single clicks it to say change the layer it wont change it. We have looked in our 'options' menu and everything is set up correct for double clicking. we have re started his computer but that didnt seem to work either.
View 4 Replies View RelatedMy double click edit function is not working even though...
DBLCLKEDIT is <ON>
PICKFIRST = <1>
and my noun/verb selection box is checked
Using LT 2014 on Win 7 Pro.
Recently got a new PC and due to problems with regular LT crashes I have recreated my customizations etc. from scratch.
Finally seem to have got everything working OK and how I it was on my old PC, other than one minor issue.
I have edited the CUI so that the "old" attribute editor (ATTEDIT) is launched rather than the enhanced (EATTEDIT) version.
However after double clicking a block a further third click is required to select block/launch editor.
Editing CUI back to EATTEDIT works ok with only a double click required.
I am using 2008. In previous releases I was able to double click on a feature in the tree and edit any dimension I wanted to, including the "extrusion dim". If I wanted to just edit the extrusion, I would RMB and edit feature. Now when I DBL Click in the tree, it is the same as the RMB used to be. Now to edit any dim other than the extrusion, I have to edit sketch.
View 9 Replies View RelatedI was just wondering if you can customize your interface so you can edit note labels (or any labels for that matter) by double clicking. I've already gone throught the cui files but I can't find anything. Am I missing something. c3d 2007
View 9 Replies View RelatedWhen I edit a block in place, REFEDIT toolbar pops up. This is good.
But why even I clicked "Add to working set" button on the toolbar, it still asks me select "Add" in command line?
Apparently I already selected "Add" button.
Is there a way to skip this command line option?
Any way to customize the double-click of a block attribute to run the _ATTIPEDIT command on the targeted attribute? I know this can be achieved by holding Ctrl & then double clicking, but I am often using my hand else where on the keyboard, or even more often, when entering many values into attributes, I am using my left hand to keep my place on a sheet of paper as I scroll down it and enter in the values.
View 5 Replies View Related