AutoCAD Civil 3D :: F2 To Open Text Window?

Oct 18, 2013

This has been happening using C3D 2014:

Sometimes when I start C3D and hit F2 to open the text window it just flashes very quickly and won't stay open. Usually I will run a few other commands and then it will work properly. This only happens when I initially open the program.

View 4 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Open Window (properties Alignment) With Code?

Mar 26, 2013

I have a datagridview with the list of all alignments in the drawing.

If I put a button and press it, can be posible open the window "properties alignment" about the selected alignment in the datagrid?.

And can open directly the tab page "Design Criteria"?

I would like change some values directly from the window of Civil 3D in this case. I don´t want re-write the database(db) with code.

Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit

View 4 Replies View Related

AutoCAD Civil 3D :: Can't Close Text Window

Jun 20, 2013

About half the time, when I display the text window, it's more or less locked. I can't scroll, I can't click the "X" to close the window, I can't resize it, I can't move it, etc. All I can do is click back in the main AutoCAD window, which brings it to the top and continue working. The text window stays active and in the taskbar until summoned again - until that session of C3D is closed. (It does still reflect the current command status)

Other times, the text window acts normal. There is no obvious difference between when it acts up and when it doesn't. IOW, I'm always running the same profile, same workspace, the command line is always docked, other palette configuration is the same.

View 7 Replies View Related

AutoCAD 2010 :: When Press Open The Open-window Doesn't Open

Jan 21, 2012

When press "open" the "open"-window dosn't open. Insted it open a comandpromt by the cursor that promt me to enter full search-way and name on the file I want to open.

What can i do to get the "open"-window?

View 2 Replies View Related

AutoCAD Civil 3D :: Cogo Point Properties Window Description Format Is Forced Lower Case Text?

Nov 29, 2012

Just switched to 2012 from 2010. When I try to edit the description format field in the properties window of a selected cogo point, I can't type in caps, it's all lower case. If I right click and edit the point, I can use capital letters, however. (running C3D 2012 sp4, Win7 64bit, 8GB)

View 2 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Text Won't Wrap In Text Window?

Oct 8, 2013

When I click on an object to retrieve it's extended data, the data keeps writing to the right, it does not return to the next line, when the text approaches the end of the screen.  Very difficult to analyze information.

View 4 Replies View Related

AutoCAD 2013 :: Text Won't Wrap In Text Window

Oct 8, 2013

When I click on an object to retrieve it's extended data, the data keeps writing to the right, it does not return to the next line, when the text approches the end of the screen. 

View 2 Replies View Related

AutoCAD .NET :: Open Insert Window

Mar 1, 2012

How i can  open Autocad Insert window using .net code using API.

View 2 Replies View Related

AutoCad 3D :: Material Editor Window Will Not Open

Dec 18, 2013

I'm trying to edit some material properties before rendering. But suddenly, I can no longer open up the Material Edit window. I searched and it said to look where it was last opened. Ok, I did that because I was using it this morning. But then it disappeared for good and I cannot figure out how to re-open it. I've cold booted my computer and restarted AutoCAD but the results are the same. So what am I missing. This copy is AutoCAD 2013 and it has SP1 and SP2 loaded.

UPDATE: OK...something weird happened. I finally found it but it was hidden beneath the other icons which I have anchored on the left. I was only able to get to it by carefully placing my mouse on a piece of it and dragging it out into the model space. So, what gives and how can I avoid this in the future?

View 3 Replies View Related

AutoCAD 2010 :: Drawing Will Not Open Objectscale Window

Nov 12, 2009

I have a drawing that will not open the objectscale window (annotative scale add/delete). I either select from the right-click menu, or type in objectscale, and nothing happens. I opened a new drawing and the function worked fine in that one, just not in my existing drawing...

View 2 Replies View Related

AutoCAD .NET :: Search Window Doesn't Stay Open

Oct 22, 2012

Is there an option or a a way to keep the search window (CTRL+F) visible in Visual Studio Express 2012?

View 4 Replies View Related

AutoCAD 2013 :: Size Of Open Dialog Window

May 30, 2013

When I open a new drawing, the open dialog window stays the same size which is usually too small. I have to resize it every time I open a drawing.

View 3 Replies View Related

AutoCAD Inventor :: Open Data Cards Window Using VBA?

Aug 28, 2013

is there a way to open the data cards window using vba?

View 3 Replies View Related

AutoCad :: C3D 2012 - Open And Save As Window Not Showing

Dec 24, 2013

I am using civil 3d 2012 when i click open and save as not show a window its show command line choose file <c:folder location like this.

View 3 Replies View Related

AutoCAD 2010 :: Open Multiple Drawings Using One Window Only In Windows 7

Jul 6, 2011

why Autocad 2012 opens one window per drawing as opposed to Autocad 2007/2008 opening one window for as many drawings as you have open.  (I also don't care to group/ungroup similar programs through Windows 7.)  This must be an Autocad 2012 program default that I can't figure out to change.  

View 9 Replies View Related

AutoCAD Inventor :: Open Part Or Assembly From Window Or Browser

Feb 8, 2012

using IV2012 within the same project file i have three models. one model i can open parts or assemblies from the browser or right click on the component on the window. the other two models upon the right click or selecting in the browser the open or the edit are not available as an operation.

T7400-64bit XP
Xeon 3.2 GHz, 8GB
1.5GB NVIDIA Quadro FX5600
Factory Design Suite 2012

View 1 Replies View Related

AutoCAD 2010 :: System Slows With Command Window Open?

May 27, 2011

With the command window displayed at the bottom of the screen, everything slows down.  The cursor momentarily freezes and it takes a second or two for commands to be fulfilled.  Also, the command window is about 7 lines high; in the past, I have shrunk it to maybe 3 or 4 lines but I cannot shrink this wndow. 

Then, when I push control-9 and the window disappears, everything speeds up to normal! 

I tried turning off my internet connection and my McAfee Viruscan as well. Running without the command window makes it hard to draft. Since I type shortcuts, I figure I must have hit the wrong key and unleashed something unspeakably terrible.

I am running AutoCAD version 10 on my PC, with Windows XP Professional.

View 9 Replies View Related

AutoCAD 2010 :: Disabling Alert Window When Open Read Only File?

May 10, 2011

Is there any way to disable the "would you like to open the file read only?" alert window when I open a read only file?

Software: Inventor Series 2011 SP1 x64
OS: Vista Business x64
CPU: E6400
RAM: 2*2Gb GeIL
VGA: Quadro FX 550

View 8 Replies View Related

AutoCAD 2013 :: Drawing Preview Image Not Seen In Open File Dialog Window

Jun 1, 2012

I use Autocad since version 2.0. My THUMBSAVE value is 1.Still not showing a preview of the dwg.

View 9 Replies View Related

CorelDRAW Graphics Suite X6 :: Text Mode Crashes While Typing Text Window Box?

Jul 14, 2013

I had several CorelDraw documents that crashes on me, and the auto-backup did not work.

In all these documents, if I open the text paragraph window and typed on it, the entire program will crash if I exit that window after finishing.

I discovered that if I typed directly on the text paragraph, it will not crash. That means do not open the text paragraph window to do editing. But this makes editing very slow since it seems to be more memory intensive.

Strange the auto-backup directory/folder always do not have my backup files too.

View 6 Replies View Related

AutoCAD VB :: Sending Prompt To Text Window

Dec 13, 2006

I have the following command in my VBA routine:

ThisDrawing.Utility.Prompt vbCrLf & "ABCDEF"

When I run my VBA routine from the VBA editor, the command appears in the text window of AutoCAD the way it should, but when I run the routine with the VBAload - VBArun commands (automated on a toolbar button), it does not. Do I need to obtain the AutoCAD object and issue commands that way instead of using the thisdrawing.utility method?

View 3 Replies View Related

AutoCAD 2010 :: Turning Off The Text Window

Sep 26, 2011

I know that the (graphscr) command will change the focus of ACAD from the text window to the graphics screen, but is there a command line option to actually turn off the text window?

View 9 Replies View Related

AutoCAD 2010 :: Toggle Text Window?

Sep 18, 2012

I can press F2 to open the AutoCAD Text Window, but I'm looking for a reliable way to close it once it's open.  If it's not overlapping with AutoCAD, F2 doesn't close it.  I currently have it on a monitor other than the monitor AutoCAD is on.

Is there a system variable I can use to setup a LISP to toggle (or at least close) the Text Window using a keyboard shortcut?

System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)

View 7 Replies View Related

Photoshop :: CC Always Starts With Window Open

Oct 10, 2013

Photoshop always starts with opening a window (grey) at startup or when closed en re-opened. How can I close this window permanently so that i can see my desktop when closing last Photoshop picture (window).

View 2 Replies View Related

Photoshop :: Open Animation Window

Jul 28, 2012

I am trying to colourise a video, so I open the animation window, open a colour layer, and colour the scene. When I drag the 'Current Time Indicator', the video moves, but the colour layer (naturally) doesn't. What I do is shorten the green line on the animation window for the colour layer, duplicate the layer, re-position it on the animation window, and so on for all the frames.

What I would like to know is, is there an easier way to do this? Is there anyway I can do this without using so many layers, or edit the one colour layer, and have changes on one frame, but not on the other, with the same layer being used?

View 2 Replies View Related

Photoshop :: Open Window Shortcuts

Aug 11, 2009

When you go to save or open something in photoshop, I'd like to edit the "shortcuts" that are on the left hand side of the window (Recent Places, Desktop, User Directory, Computer, Network).  I've altered those shortcuts in vista windows and would like to do the same for photoshop.  I know that in OSX you're able to tell photoshop to use the operating system's window rather than photoshop's, is this possible on windows? 

View 2 Replies View Related

Paint.NET :: How To Open The Color Window

Mar 18, 2011

I closed the color window and now I don't know how to open it again. How?

View 1 Replies View Related

Paint.NET :: How To Open Layer In Another Window

Jun 23, 2011

I have a document with three layers, nothing fancy. I want to make one of the layers bigger. The docs say use the selection tool (in my case the rectangle tool) to make a selection. They say if you want to resize the selection just grab on of the handles. This works as it should. However I want to resize my layer, which is essentially a square image. I can't see where to do this. The layer properties don't even show the size of my layer. Is there some way to open the layer in another window?

View 2 Replies View Related

Paint.NET :: How To Open Layers Window Again

Oct 14, 2012

This is my first time using this program, and I accidentally closed the 'layers' window that shows the layers and lets you move them around. I can't find where to open it again.

View 1 Replies View Related

Illustrator :: Pathfinder Window Does Not Open

Sep 26, 2013

Pathfinder window does not open

View 1 Replies View Related

AutoCAD Inventor :: How To Get Empty Window In Text Dialog Box

Jun 20, 2013

I made a prompted entry, for example, in a sketched symbol,again, for example.

Now i edit the text and want to write a static text, not a prompted entry and none from that list, but i cannot get the empty, white, window, like in the picture, and like when i start a new text.

I am forced to choose only from the list.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved