Photoshop :: Dragging Window Reverts To Original Position
Apr 15, 2013
I drop multiple photos into Photoshop then drag one at a time away from the tab bar in order to place these photos onto one layered image. I can do this but the photo I have dragged down remains positioned where i dragged it to and cant be freely moved to another part of the screen. It springs back like its on a rubber band. This is a problem when I wish to close the floating window and don't have the top right close button visible.
I have to return it to the tab top bar in order to open it then close the window. I previous versions of PS this was not a problem and now requires all these extra steps to solve. Its very frustrating when I have to work like this all day. I have PS CS6 on MS WIN7. Is there a preference selection I can make. I want to make photoshop windows behave like MS windows and remain where I drag them to.
View 9 Replies
ADVERTISEMENT
Apr 11, 2012
In the attached file there are two custom iProperties that cannot be perminantly updated nor deleted. The iProperties are "size" and "purch_qty". These iProperties were created and set using a custom macro but they are of course accessable via the standard iProperties dialog. I can change the values for these particular iProperties but as soon as I save the file they revert back to their original values. Same goes for trying to delete them. All other iProperties, custom and otherwise, seem to behave normally.
The sketch in this file originated with a 2D DXF file for a vendor supplied aluminum extrusion quite a few years back. The original file has been copied (save-as...) to about 20 different files over the years. The iProperties in question were added years after most of the files were created, Each file is exibiting the same problem. These files are used in a LOT of assemblies. The thought of recreating all these files from scratch and updating the assemblies is not very inviting.
No other IPT files seem to be having this issue.
Inventor 2012 SP-1
Acad 2012 SP-1
Vault 2012 Update 1 Hotfix DL18480860
Windows 7 Pro 64-bit SP-1
Quad core Xeon 2.26GHz 12 GB
Quadro 4000, 7936 Mb, driver 8.17.12.6570 (265.70), Dual Monitors
SpacePilot Pro, driver 3.3.107.0
View 3 Replies
View Related
Apr 6, 2013
I am trying to move the layer to another ducument, to the same position. (photoshop)
But whever I drag it, the layer goes to the center of the new document even while pressing the shift key. (both of the document sized are same) I think it worked before, don't know when but now, it doenst work as I expect.
What should I do?
View 6 Replies
View Related
Mar 23, 2009
Why does an image darken while dragging the window within Photoshop CS4?
Once the window is released with the mouse/pen, it snaps back to how it was?
Explained further:
Open an image in Photoshop CS4.
Click & hold the grey title bar at the top of the image.
Move it around within the Photoshop window.
It noticably "pops" - darkens.
Release the mouse/pen, image snaps back to how it was.
Weird
I've put a sample point on a section of the image, numbers don't change.
I've tried disabling "Open GL Drawing"
- Doesn't happen but...
- Image appears darker as per when dragging with "Open GL Drawing enabled.
- Numbers remain the same on the sample point.
Hope this makes sense.
Here are some specs:
Photoshop V 11.0.1
Graphics Card: NVidia GeForce 7950 GT
Driver Verssion: 182.08 (latest)
Windows Vista Business, 64-bit (Service Pack 1)
8GB RAM
View 13 Replies
View Related
Feb 7, 2013
-------setup:
ps cs 6
win 7 64
dual monitor setup
preferences -> perfomance as follows:
use graphics processor: ticked
advanced settings:
drawing mode: advanced
everything else in advanced is also ticked
problem:if i drag an image on my secondary (image editing) monitor the images saturation/color changes while i drag it. on mouse release it goes back to normal.this doesnt happen on my primary (system etc) monitor.yes i could probably workaround making my editing monitor my primary monitor, but i don't want to, because i want it free of windows bars and similar rubbish.
View 1 Replies
View Related
Jun 23, 2012
I made a complex sketch, and want to extrude.When i want to select the whole sketch, i position the mouse on the upper left of the screen and drag down and right, but no window is created.
And i cannot add segments to the selection, even with pressing SHIFT, because immediately after the first is selected, it is extruded.you see on the picture i attached that some segments (in red) are connected. how can i connect all the sketch together, so when i will select it everything is selected.
View 9 Replies
View Related
Jan 17, 2012
My Vista system has developed a few bugs which are not cured by Norton 360.Dragging a window causes it to maximize in a few programs PASTE does not work in some programs -- including X4 . The CROP tool stopped working in X4 but is OK in X5 High-lighting is erratic in WORD etc.
I can only run a "clean" install from my OEM disk which means reloading all applications.I was wondering if I should give up and install Windows 7.
What has been your experience with Windows 7/Did you do a "clean" install or just the update.
View 4 Replies
View Related
May 11, 2012
While making selection by drawing a selection window, the objects often get seelected and get dragged. These objects lie on the starting vertex of the selection window. Therefore I have to find the desired bjects to be selected in object manager lying in haphazard order. Is there a way , the objects don’t get dragged while making a selection window from left to right. That means, the objects get selected which are present in the selection window only.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
View 8 Replies
View Related
Sep 22, 2013
How do you get window size and position incorporated into Photoshop CC workspaces?
View 3 Replies
View Related
Mar 24, 2012
I have actions in CS1 to open :
"Levels" window so I can individually adjust & save
"File info" window so I can individually add text & save
The former window I can move & all following windows will open in new position.The latter I can move but next image always opens centrally again. Any way to make "File info" window open off to one side?
View 1 Replies
View Related
Apr 19, 2013
Elements 10 on a MAC, his organizer window appears on screen with the top line/menu bar having File, Edit, find, View etc. off the screen at the top and I can't move it down to display properly. I am not very familiar with a MAC being a PC user myself
View 4 Replies
View Related
Apr 5, 2004
i want it back to the default setting or original setting.
View 1 Replies
View Related
Sep 11, 2012
I have created a model on autocad which I have imported into autodesk inventor publisher...for my project I have to simulate an object's assembly and subsequent dissassembly. But to begin with my model is assembled so i have exploded it and now I want to put it back together - however I can't get the program to remember the position each component was originally in so when i try and move each component back it's all over the place and looks awful. Is there a way to mark an object's intial location so that i can move it back to exactly that place?
View 4 Replies
View Related
Jun 4, 2013
Is there a simple way to retrieve the mouse position in the inventor window? I know about using mouse events but i don't want the position on click etc. just where it's at when i run my code.
View 9 Replies
View Related
Mar 8, 2013
os windows 7, upgraded to Gimp 2.8.4 I open an .xcf file and go to single window mode. everthing looks ok the zero offsets on the rulers are where they should be and I can see the bottom of the gimp window where the % size change is. I then ask for a new tool bar which is provided and locked to the widow. if i go to full screen and then back the picture is pushed down as are the ruler zero's and i now can't get to the bottom of the screen. this annoying behavior does not seem to happen in multi window mode. attached is a screen capture.
View 4 Replies
View Related
Apr 10, 2012
On Windows 7 Home Premium x64, GIMP does not properly restore the position of the Toolbox window with "Save window positions on exit" checked in Preferences > Window Management. The Toolbox window does retain its size, but is placed in a seemingly random place in the top-left area of the screen every time GIMP is launched. Other windows retain their size and shape perfectly. I've searched for a solution to this problem but couldn't find one.
View 2 Replies
View Related
Apr 7, 2011
Am using the "pre-defined" walls in Autocad Architecture 2010, with equally pre-defined windows.
I have found where to change ("Edit window style") virtually every parameter of the window, e.g. frame and sash depths.
However - I can not find a way to change the position of the the glass in the window relative to the interior/exterior of the wall. (see attached image for clarification)
I hope I am making myself understood - the glass could for example (assuming the depth of the frame is the same as that of the wall it sits in) be located 40mm from the exterior of the wall - or 10mm.
View 2 Replies
View Related
Jan 16, 2014
SO difficult to see the text change and determine if it is at the right angle when the original text is still there.
How can I only display the new "Rotating Text" without the "Original Position" text.
View 8 Replies
View Related
Jul 12, 2012
I'm refining some SVG files, imported into GIMP as paths. I added numerous guides on the images and drag anchors to the guides. All the paths consist of straight lines only. The problem is that on some anchors GIMP performs the "drag curve" operation instead of the "drag anchor". As a result, my straight lines become broken (curved).
The only solution I've found so far is to apply maximum zoom level, say 400%, and repeat the dragging in this resolution. This makes GIMP work properly, at least, I'm able to "drag anchor" as expected. But switching back and forth to the 400% zoom level is a bit annoying and inconvenient.
Is there a better way to "say" GIMP that "dragging anchor" is the "dragging anchor", not "dragging curve"?
View 1 Replies
View Related
Mar 20, 2014
URL....I am using PSE 12 as a photo editor for Aperture 3.5.1 and the photo is duplicated (as a tiff) in Aperture and PSE editor opens with the image. When I close the file and say to save the file it brings up the save as window.
I tell PSE 12 to "on first save -- save over current file" it now brings up the "save as" window and won't save over the file (changes the file type from .tiff to .tif)
View 2 Replies
View Related
Jan 13, 2014
When you select the option to apply any changes & overwrite your original photo does the program attempt to try to a default setting to keep the picture approximately the same size as it was before? (assuming that you haven't cropped it) If it doesn't default to a size automatically can is there an option to do so?
View 4 Replies
View Related
Jul 12, 2013
Is it possible to setup a block so that an attribute position remaines fixed (absolute to drawing) when moving the block?
I've been playing around with creating a Coordinate Block by following these instructions: [URL] ........
What I would like is to be able to set the position of the Coordinate Label and Coordinate Object independently, so that if I move one in the drawing, it doesn't move the other. I've looked into Dynamic Blocks, and the "Lock Position" parameter. I can move the attribute independently, but still everytime I move the block, the attribute moves too.
Our company uses a custom Sheet/Coordinate system to follow flyoffs across a drawing, and I'm trying to learn how to automate the process. It's completely manually right now, so any changes to a drawing creates a lot of work renumbering these flyoffs.
View 4 Replies
View Related
Oct 23, 2005
Having trouble with my Photoshop 7. When I want to use the Brightness/Contrast adjustment within the Image/Adjustment section the scroll bars for brightness/contrast do not come up. An eyedropper tool appears. When this happens I can only click on the image and change the color squares on the left in the tools area. I can't even close the image or close the program. I have to Alt/ctrl/delete to close the program. I've also uninstalled the program & reloaded but this problem continues.
View 7 Replies
View Related
Nov 19, 2013
In PSE12, Organizer, when I zoom in to see a photo, and apply Smart Fix or Rotate left or right. when the program finishes, I see the save icon, then the screen zooms out to the page with the first file in the folder. Quite annoying when I'm trying to see the effects of the Smart Fix. I have to refind the photo and zoom in again. I'd like to stay where i was until i get a chance to look at the corrections. How do I stop that?
View 1 Replies
View Related
Mar 27, 2013
My questions is how to prevent the following from happening. I created a layer style drop shadow in a .psd file with the below parameters.
I saved it as an .asl file that I could use later. When I loaded it into a different .psd file later that day some parameters stayed the same but the angle reverted back to 30 degrees from 120 degrees all on its own as shown below.
I just want to know how to keep layer style parameters I saved in an .asl file from reverting back to defaults when loaded in to a new .psd file.
My systems parameters are as follows:
Photoshop CS6 Extend Version 13.0 x64
Mac OSX 10.8.2 with 705.44 GB used out of 749.3 GB available
The only other software I am running is Safari web browser. This is my first time trying to save a layer style and use it in a different .psd file other than the one I created it in.
View 3 Replies
View Related
Sep 20, 2013
It seems unlike previous PC's, when i sart up AutoCAD my new set up reverts the location of the tool palletes to open center to my screen 1 even after i have positioned it on screen two.
I understand the tool palette should hold its location in the position i last placed it.. in screen two. as do you toolbars....
Why does the tool palette keep reverting back the center location on my screen, not where it was placed
View 6 Replies
View Related
Jul 17, 2013
I have a set of dimensions, which for the purposes of the 1/2"=1'-0" viewport, are set to a scale of 24x. If I go to adjust some, not all, just some of the dimensions, it kicks it to 576x; this happens if I adjust the placement/grips of the dimension, or even change the precision from 1/32" to 1/8". In the DIMSTYLE dialogue box, I have everything set to the precision and scale I need; I UPDATE all dim's in the layout, and some, not all, still stay at 576x and 1/32".
One "workaround" is to just get all the dim's in place and MATCH them all to the one dimension that is and stays at 24x & 1/8" prec; however, this is a hassle given how many dim's are on this struc. sheet. This is made a little easier using LAYISO, but I want it done correctly as I move forward and not have to keep double-checking every d*** dim before plotting or sending the file to someone else.
Is there some setting, presumably that keeps overriding all of my overrides and settings adjustments? I don't understand how I can create a new dim, and it follows my settings like normal, but I go to adjust it, and it's 576x|1/32", which I cannot track to any setting within DIMSTYLE.
ACAD '10
View 0 Replies
View Related
Jan 28, 2011
severity rating reverts to 3 when hit submit?
View 1 Replies
View Related
Nov 28, 2012
When a photo comes into develop section, initially the Basic sliders are shown in the new 4.2 choices with the sliders centered. As soon as the photo is ready to edit, the Basic section reverts to the Lightroom 3 choices.
View 4 Replies
View Related
Jul 28, 2013
I've created my own workspace and saved it. When I shut down coreldraw and it reverts back to default and I have to manually set it back to use the one I saved.
View 2 Replies
View Related
Dec 5, 2011
PSP x4 SP1, EDIT view. I disabled tabbed documents. If I minimize a pic or pics and then restore, the pic or pics restore into tabs. When I subsequently go to Window >Tabbed Document and click, all of the pics cascade (ignoring my preference to have the MDI windows fit the pictures). The Window > Tabbed Documents command is never unchecked throughout all of this. I can't make it be unchecked - it remains checked.
Palettes that I don't use open seemingly at random on my custom workspace after restarting the software, even though I have the NEVER automatically show palettes option set in preferences
I had given up on x4, but I thought I'd try the service pack. Corel did fix the copy/paste offset error. But, after a few hours of configuring (again) and playing with SP1, I still think that x4 is not ready for prime time. I feel that it is a waste of upgrade money and a regrettable waste of my time.
View 2 Replies
View Related
