Photoshop :: Dragging Window In CS4 Darkens Image
Mar 23, 2009
Why does an image darken while dragging the window within Photoshop CS4?
Once the window is released with the mouse/pen, it snaps back to how it was?
Explained further:
Open an image in Photoshop CS4.
Click & hold the grey title bar at the top of the image.
Move it around within the Photoshop window.
It noticably "pops" - darkens.
Release the mouse/pen, image snaps back to how it was.
Weird
I've put a sample point on a section of the image, numbers don't change.
I've tried disabling "Open GL Drawing"
- Doesn't happen but...
- Image appears darker as per when dragging with "Open GL Drawing enabled.
- Numbers remain the same on the sample point.
Hope this makes sense.
Here are some specs:
Photoshop V 11.0.1
Graphics Card: NVidia GeForce 7950 GT
Driver Verssion: 182.08 (latest)
Windows Vista Business, 64-bit (Service Pack 1)
8GB RAM
View 13 Replies
ADVERTISEMENT
Feb 7, 2013
-------setup:
ps cs 6
win 7 64
dual monitor setup
preferences -> perfomance as follows:
use graphics processor: ticked
advanced settings:
drawing mode: advanced
everything else in advanced is also ticked
problem:if i drag an image on my secondary (image editing) monitor the images saturation/color changes while i drag it. on mouse release it goes back to normal.this doesnt happen on my primary (system etc) monitor.yes i could probably workaround making my editing monitor my primary monitor, but i don't want to, because i want it free of windows bars and similar rubbish.
View 1 Replies
View Related
Apr 15, 2013
I drop multiple photos into Photoshop then drag one at a time away from the tab bar in order to place these photos onto one layered image. I can do this but the photo I have dragged down remains positioned where i dragged it to and cant be freely moved to another part of the screen. It springs back like its on a rubber band. This is a problem when I wish to close the floating window and don't have the top right close button visible.
I have to return it to the tab top bar in order to open it then close the window. I previous versions of PS this was not a problem and now requires all these extra steps to solve. Its very frustrating when I have to work like this all day. I have PS CS6 on MS WIN7. Is there a preference selection I can make. I want to make photoshop windows behave like MS windows and remain where I drag them to.
View 9 Replies
View Related
Jun 23, 2012
I made a complex sketch, and want to extrude.When i want to select the whole sketch, i position the mouse on the upper left of the screen and drag down and right, but no window is created.
And i cannot add segments to the selection, even with pressing SHIFT, because immediately after the first is selected, it is extruded.you see on the picture i attached that some segments (in red) are connected. how can i connect all the sketch together, so when i will select it everything is selected.
View 9 Replies
View Related
Jan 17, 2012
My Vista system has developed a few bugs which are not cured by Norton 360.Dragging a window causes it to maximize in a few programs PASTE does not work in some programs -- including X4 . The CROP tool stopped working in X4 but is OK in X5 High-lighting is erratic in WORD etc.
I can only run a "clean" install from my OEM disk which means reloading all applications.I was wondering if I should give up and install Windows 7.
What has been your experience with Windows 7/Did you do a "clean" install or just the update.
View 4 Replies
View Related
May 11, 2012
While making selection by drawing a selection window, the objects often get seelected and get dragged. These objects lie on the starting vertex of the selection window. Therefore I have to find the desired bjects to be selected in object manager lying in haphazard order. Is there a way , the objects don’t get dragged while making a selection window from left to right. That means, the objects get selected which are present in the selection window only.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
View 8 Replies
View Related
Jul 3, 2012
in cs5 to drag a 3d shape or object into a new document or another image was done by the move tool.what tool in cs6 extended replaces the move tool to drag images into another file or image.
View 2 Replies
View Related
Aug 9, 2009
I have got a GIF image of a push pin that I'm trying to drag onto a JPEG photo. I 've got both images open, and when I select the move tool for the push pin GIF, it starts to drag, but won't move across to the JPEG photo.
View 4 Replies
View Related
Aug 30, 2012
When I drag an image into Photoshop, it is TINY. It doesn't matter the resolution of the image. It could be the biggest image in the universe and it shows up so small to where I have to use Free Transform every single time. Even the eraser is so small that I can't see it. It can be on 2500 but the eraser is a dot.
Is my Photoshop on a certain setting that I can change? This is my first time using the software on my new Macbook.
View 3 Replies
View Related
Oct 23, 2012
Just for clarification, are there any drawbacks to just dragging an image from my desktop onto an artboard instead of placing it? The image will not be autotraced, and will become part of a layout in my AI file.
View 6 Replies
View Related
Sep 28, 2013
Before, whilst in Google Inspect on any webpage I could drag an image onto the Photoshop application icon on the dock = opens up in Photoshop + with PNG transparency.
Now this has stopped working for an unknown reason about 2-3 months ago after updating. I'll drag the image over the application icon on the dock as before, but then nothing opens. As a result, my workflow is now more inefficient and inconvenient.
View 3 Replies
View Related
Jan 27, 2007
You know those "warp a celebrity" flash or java games where you click on part of the celebrity's face and drag the mouse, and the image warps? Can this sort of thing be done to your images in photoshop 6.0? (That's the version I have)
If this can't be done in Photoshop 6.0, does anyone know of a simple freeware program that I can use to warp images "celebrity warp" style?
View 3 Replies
View Related
Oct 14, 2012
Using CS6 Mac, I am un successful in dragging and dropping a scanned image from PS to Illustrator.In the past i was able to do this with CS3 PC.
View 6 Replies
View Related
Aug 29, 2013
I'm writing because after reinstall the Mountain Lion (10.8.4), I realized that dragging an image from Chrome (29.0. 1547. 62) to the dock icon Photoshop CS6 the icon is not active and therefore the program does not open with the image, I tried with firefox (23.0.1) and the dock icon photoshop is animated and open photoshop but show the following message "Could not complete your request because Photoshop does not recognize this type of file." I tried with SAFARI and all fine, without problems. I note that before reinstallation and after doing a clean install (I do a back up, I formated the hard drive and install the mountain lion) this option worked perfect.
I check the following path ~ / Library / Caches / TemporaryItems that is where store the pictures as you take the browser and when stored in the folder but never open photoshop, I want to emphasize that opening photoshop and open a blank canvas, I can drag and drop (drag and drop) and the image appears, but with the dock icon anymore.
I have many theories but also not solve:
1. It's a permissions problem.
2. Any option is not enabled (OS X or photoshop) or not installed
3. Some kind of incompatibility, but again and worked without problems.
View 2 Replies
View Related
Jul 12, 2012
I'm refining some SVG files, imported into GIMP as paths. I added numerous guides on the images and drag anchors to the guides. All the paths consist of straight lines only. The problem is that on some anchors GIMP performs the "drag curve" operation instead of the "drag anchor". As a result, my straight lines become broken (curved).
The only solution I've found so far is to apply maximum zoom level, say 400%, and repeat the dragging in this resolution. This makes GIMP work properly, at least, I'm able to "drag anchor" as expected. But switching back and forth to the 400% zoom level is a bit annoying and inconvenient.
Is there a better way to "say" GIMP that "dragging anchor" is the "dragging anchor", not "dragging curve"?
View 1 Replies
View Related
Nov 11, 2012
images turning black+white when dragging one image onto another this has only just started happening?
View 2 Replies
View Related
Feb 6, 2014
In the program window, it looks like its been pushed way in on the full image in the source window. No matter what I do, I can't get it to appear the same as in the source window...
View 4 Replies
View Related
Apr 19, 2013
When I drag a selection to the edge of the window enough to cause the artboard to move while holding a selection, the whole window fills with clutter built of the selection.
As soon as I stop dragging and release the mouse, the window clears and the move is completed appropriately.
I hope the image can go well with my description...
View 4 Replies
View Related
Jul 10, 2012
the Adobe presets delivered with LR4 for sharpening include a command line which forces a switch to the new process engine "2012" or ProcessVersion = "6.7". I do not understand why Adobe allows a general preset to include a process version change command.
As a result, these sharpening presets can not be used on photos from an older LR3.x catalog without affecting the exposure or brightness - if you do, the picture exposure or brightness or whatever is set to lower settings, the histogram shows a darkening of about 2/3 aperture. Unfortunately, as the exposure changes, no slider or number value of the exposure, brightness etc. do change - very inconsistent.
In case you would choose to develop an older photo in LR4.1 and first use the upate icon button right of the picture to update the photo to process version 2012, then the picture will convert without changes in exposure (to the new process version) and then, the sharpening preset will not alter the exposure.
Also, it is hard to understand that the command line in the preset has a different result compared to the update button.
Presets seem to be dependent on certain process versions. No consideration is visible in the software for upgrade of change management of presets vs. process versions. A hard switch by command line does not to the job - this command line should not be in the preset. OR - the presets have to be named "LR4.1 presets only".
I consider this behaviour to be a bug or nonconformity of the software.
will have to manage all manually, with a catalog of approx. 35.000 pictures.
View 4 Replies
View Related
Mar 24, 2013
I am designing a logo using the Extrude and Bevel effect for some depth. When applied--using the Plastic Shading option--it darkens the original colors.Is there a way around this to maintain the hue in the original color.
View 4 Replies
View Related
Aug 19, 2012
I've seen a strange behaviour when it opens a new batch of DNG RAW files from my Pentax K-R; it seems to automatically take a stop or two of exposure out of all of the photos, regardless of whether or not they were under/overexposed. I can watch it going through them one by one and reducing the exposure of each photo in that batch. So far I don't think that it's lost any information (crushed the blacks beyond repair) but it's annoying that now I have to go back and bring all the photos back up a stop of two to return them to a correct exposure. The same behaviour is not present when I open the DNG files in the Pentax photo editor (Silky-Pix).
Is there some sort of auto-behaviour that is doing this? I've looked through all the options / preferences that I can find and haven't come across anything that seems to be related. Asside from this I've been very happy with X4 and I think it's a great value for what it does, but I'm holding off on editing my latest batch of pics until I figure this out.
View 1 Replies
View Related
Nov 28, 2012
I got single clip in desktop and it got an alpha embedded. If i drag that clip into the cfx , the clip will be interpreted correctly where alpha will be recognized. The problem in action is when i drag into action schematic, the alpha is ignored Smoke should know if there's alpha embedded then by default it should use it. ANother problem is when in media list , i add new media then click the clip twice (to grab F and M from the same clip), the result : i got blank alpha. Again it should load the alpha while there's alpha embedded . I think , this should become the dafault behaviour to deal with alpha. Although loading this clip in cfx schematic will solve the problem, i think the action still need to be fixed.
Also it should be cool feature if i can drag the clip from library and drop it in media list , and it will replace the media of the selected item in media list.
View 5 Replies
View Related
Aug 8, 2012
I'm having trouble importing images in Illustrator CS6. Dragging from finder doesn't work, nor does the "place" option. When opening an image in illustrator, all i get is a blank document.
View 2 Replies
View Related
Feb 16, 2014
I've been trying to select and area of a JPEG but the whole thing keeps moving around.
View 2 Replies
View Related
Nov 11, 2008
using Photoshop 5.0 or 7.0
I want to have a gif animation working on a web page - and I want to put a window frame around it so it seems like you are watching the animated image through a window looking into a house. (like a window peeper)
What I need to do is take out the four window pains (or all if I have to) to make the actual pains transparent to show the gif image working.
I am not sure how I can get to superimpose the window frame image OVER the gif image.
View 1 Replies
View Related
Nov 10, 2011
Model Space Screen Darkens and am unable to see screen
View 2 Replies
View Related
Aug 31, 2013
I'm using the student edition of PS6 Extended. The settings are Window>Arrange>Float all in windows. There were two image boxes open, and both of them were plastered against the left side of the screen, and every time I grabbed one to move it, it slipped back to the left as soon as I released it, and in ever-increasing increments, to the point where I couldn't even see the picture anymore.
View 4 Replies
View Related
Apr 23, 2007
'how do i make the window frame around my image the exact size as my image'
i want the image on the bottom to look like the image on the top, all neatly framed...
...without resizing the window border by it dragging by hand.
View 9 Replies
View Related
Nov 16, 2008
I am using Photoshop CS4 on a 32bit vista Q6600. When I installed CS4, I had a graphics card based on a 8600GS. Photoshop run fine, even in openGL.
Not I upgraded the graphics card to a 9600GT for better performance. CS4 still starts, but when a photo is loaded, the photo appears correctly in the navigator, but the main window where the photo usually appeared remains grey, as the background. When moving around this window, the photo appear, but as soon as I release the mouse button, the window turn grey again...
When I deactivate openGL in CS4, everything seems to work.
I am having the latest NVidia drivers installed 178.24 (with both graphics cards).
I tried to reinstall the driver, no change.
I tried to reinstall CS4, no change.
getting CS4 work in openGL with this 9600GT?
View 4 Replies
View Related
Oct 15, 2008
every new image opened in CS4 opens as a maximized window, with portions of the image hidden behind the right-hand panels ... and so for each new image, I must execute the menu sequence Window - Arrange - Float in Window, then re-size the resulting window.
Is there any way to set my preferences here as a default?
Saving my workspace doesn't do it.
View 7 Replies
View Related
Jan 4, 2013
I just got CS6 and went to use the lens flare. The window is so small, I can't see where the flare is being placed. Is there any way to enlarge the image in the tiny window?
View 10 Replies
View Related
