Photoshop :: Dragging Image From Chrome To Dock Icon CS6
Aug 29, 2013
I'm writing because after reinstall the Mountain Lion (10.8.4), I realized that dragging an image from Chrome (29.0. 1547. 62) to the dock icon Photoshop CS6 the icon is not active and therefore the program does not open with the image, I tried with firefox (23.0.1) and the dock icon photoshop is animated and open photoshop but show the following message "Could not complete your request because Photoshop does not recognize this type of file." I tried with SAFARI and all fine, without problems. I note that before reinstallation and after doing a clean install (I do a back up, I formated the hard drive and install the mountain lion) this option worked perfect.
I check the following path ~ / Library / Caches / TemporaryItems that is where store the pictures as you take the browser and when stored in the folder but never open photoshop, I want to emphasize that opening photoshop and open a blank canvas, I can drag and drop (drag and drop) and the image appears, but with the dock icon anymore.
I have many theories but also not solve:
1. It's a permissions problem.
2. Any option is not enabled (OS X or photoshop) or not installed
3. Some kind of incompatibility, but again and worked without problems.
View 2 Replies
ADVERTISEMENT
Nov 28, 2012
Why can't I open a file in Elements Editor 11 for Mac by dragging the file onto the Elements icon in the dock? I have been using previous versions of Elements for many years and this has always worked.
View 1 Replies
View Related
Nov 30, 2013
i have the PSCC icon on the desktop but I cannot make it go on the Mac dock. Is there a way to do this?
View 1 Replies
View Related
Dec 11, 2012
Photoshop dock icon disappeared since the Retina update? Just to be clear, it hasn't just removed itself from the Dock. There's an empty space and when moused over it says Adobe Photoshop CS6 but it's just a blank space. The icon is missing from the Applications folder too.
View 7 Replies
View Related
Apr 20, 2004
I have replaced the icon on the dock and run disk utilites I still can not drag a file on to the icon on the dock to open it, any other suggstions.
View 1 Replies
View Related
Dec 14, 2013
I was trying to make an after effects icon on the dock ( I have a MacBook pro running mavericks )I have a subscription to the creative cloud - and have downloaded after effects CS6 . but....
Now when I try to open one of my After effects projects it says " Error message something about I need to uninstall the older version of after- effects and then it listed a preset ( blur) and when I close the window , there were approximately 30 similar windows with the same message , but a different preset,( blur this or that )
So like an idiot I went to my applications and dragged my after effects app icon to the trash ( there were two of them) and then emptied the trash- Now all my After effects files are greyed out with small green text that says "exec"
I cant open my AE(after effects) files, I went to the cloud to re-install it and it says it is alll updated , should I do a uninstall? How do I do that? can I do that and then re-install AE CS6?will adobe make me download the newer CC version?I don't want that version because all the computers at my school run CS6.
View 1 Replies
View Related
Oct 31, 2011
I have some text icons on my phone size 48x48.. i am trying to get them chrome / metallic . Is there an easy way 9well easy for me way ) to do it . i have followed this
[URL]........ and all the other ones are the same but am stuck i just cant seem to do it .
View 1 Replies
View Related
Feb 6, 2013
In Elements 7 there are Transion Icons bwtween clips even when a clip is split.
It is possible to place photos etc between clips by dragging to icon.
This is is Sceneview & I take it that Quick in Elements 7 is similar.
There are no such icons in Elements 11 and all atempts to get photos places these at end and then these have to be moved.
View 1 Replies
View Related
Sep 8, 2011
I need to convert a PNG image to an icon in Windows icon format.Can I do that in XDP7?
View 9 Replies
View Related
Jul 3, 2012
in cs5 to drag a 3d shape or object into a new document or another image was done by the move tool.what tool in cs6 extended replaces the move tool to drag images into another file or image.
View 2 Replies
View Related
Aug 9, 2009
I have got a GIF image of a push pin that I'm trying to drag onto a JPEG photo. I 've got both images open, and when I select the move tool for the push pin GIF, it starts to drag, but won't move across to the JPEG photo.
View 4 Replies
View Related
Aug 30, 2012
When I drag an image into Photoshop, it is TINY. It doesn't matter the resolution of the image. It could be the biggest image in the universe and it shows up so small to where I have to use Free Transform every single time. Even the eraser is so small that I can't see it. It can be on 2500 but the eraser is a dot.
Is my Photoshop on a certain setting that I can change? This is my first time using the software on my new Macbook.
View 3 Replies
View Related
Oct 23, 2012
Just for clarification, are there any drawbacks to just dragging an image from my desktop onto an artboard instead of placing it? The image will not be autotraced, and will become part of a layout in my AI file.
View 6 Replies
View Related
Sep 28, 2013
Before, whilst in Google Inspect on any webpage I could drag an image onto the Photoshop application icon on the dock = opens up in Photoshop + with PNG transparency.
Now this has stopped working for an unknown reason about 2-3 months ago after updating. I'll drag the image over the application icon on the dock as before, but then nothing opens. As a result, my workflow is now more inefficient and inconvenient.
View 3 Replies
View Related
Jan 27, 2007
You know those "warp a celebrity" flash or java games where you click on part of the celebrity's face and drag the mouse, and the image warps? Can this sort of thing be done to your images in photoshop 6.0? (That's the version I have)
If this can't be done in Photoshop 6.0, does anyone know of a simple freeware program that I can use to warp images "celebrity warp" style?
View 3 Replies
View Related
Mar 23, 2009
Why does an image darken while dragging the window within Photoshop CS4?
Once the window is released with the mouse/pen, it snaps back to how it was?
Explained further:
Open an image in Photoshop CS4.
Click & hold the grey title bar at the top of the image.
Move it around within the Photoshop window.
It noticably "pops" - darkens.
Release the mouse/pen, image snaps back to how it was.
Weird
I've put a sample point on a section of the image, numbers don't change.
I've tried disabling "Open GL Drawing"
- Doesn't happen but...
- Image appears darker as per when dragging with "Open GL Drawing enabled.
- Numbers remain the same on the sample point.
Hope this makes sense.
Here are some specs:
Photoshop V 11.0.1
Graphics Card: NVidia GeForce 7950 GT
Driver Verssion: 182.08 (latest)
Windows Vista Business, 64-bit (Service Pack 1)
8GB RAM
View 13 Replies
View Related
Feb 7, 2013
-------setup:
ps cs 6
win 7 64
dual monitor setup
preferences -> perfomance as follows:
use graphics processor: ticked
advanced settings:
drawing mode: advanced
everything else in advanced is also ticked
problem:if i drag an image on my secondary (image editing) monitor the images saturation/color changes while i drag it. on mouse release it goes back to normal.this doesnt happen on my primary (system etc) monitor.yes i could probably workaround making my editing monitor my primary monitor, but i don't want to, because i want it free of windows bars and similar rubbish.
View 1 Replies
View Related
Oct 14, 2012
Using CS6 Mac, I am un successful in dragging and dropping a scanned image from PS to Illustrator.In the past i was able to do this with CS3 PC.
View 6 Replies
View Related
Jul 12, 2012
I'm refining some SVG files, imported into GIMP as paths. I added numerous guides on the images and drag anchors to the guides. All the paths consist of straight lines only. The problem is that on some anchors GIMP performs the "drag curve" operation instead of the "drag anchor". As a result, my straight lines become broken (curved).
The only solution I've found so far is to apply maximum zoom level, say 400%, and repeat the dragging in this resolution. This makes GIMP work properly, at least, I'm able to "drag anchor" as expected. But switching back and forth to the 400% zoom level is a bit annoying and inconvenient.
Is there a better way to "say" GIMP that "dragging anchor" is the "dragging anchor", not "dragging curve"?
View 1 Replies
View Related
Nov 11, 2012
images turning black+white when dragging one image onto another this has only just started happening?
View 2 Replies
View Related
Apr 19, 2013
When I drag a selection to the edge of the window enough to cause the artboard to move while holding a selection, the whole window fills with clutter built of the selection.
As soon as I stop dragging and release the mouse, the window clears and the move is completed appropriately.
I hope the image can go well with my description...
View 4 Replies
View Related
Nov 28, 2012
I got single clip in desktop and it got an alpha embedded. If i drag that clip into the cfx , the clip will be interpreted correctly where alpha will be recognized. The problem in action is when i drag into action schematic, the alpha is ignored Smoke should know if there's alpha embedded then by default it should use it. ANother problem is when in media list , i add new media then click the clip twice (to grab F and M from the same clip), the result : i got blank alpha. Again it should load the alpha while there's alpha embedded . I think , this should become the dafault behaviour to deal with alpha. Although loading this clip in cfx schematic will solve the problem, i think the action still need to be fixed.
Also it should be cool feature if i can drag the clip from library and drop it in media list , and it will replace the media of the selected item in media list.
View 5 Replies
View Related
Aug 8, 2012
I'm having trouble importing images in Illustrator CS6. Dragging from finder doesn't work, nor does the "place" option. When opening an image in illustrator, all i get is a blank document.
View 2 Replies
View Related
Feb 16, 2014
I've been trying to select and area of a JPEG but the whole thing keeps moving around.
View 2 Replies
View Related
Mar 23, 2011
I am trying to insert a JPG image in my IDW, but the "image" icon is greyed out?
View 5 Replies
View Related
Jun 12, 2013
A tiny icon like + in a circle (like a gunsight) has appeared in a Photoshop CS5 image. I must have clicked on something, but how can I get rid of it?
View 3 Replies
View Related
Jul 13, 2013
I found out how to do this recently so I decided that I wanted to make a tut for those who don't know how to make an icon image. This icon image is for the libraries tab on your computer. Under the libraries tab there is Music, Pictures, Documents, and Photos
First you will need the ICO (Icon image format) Format extension for Photoshop which can be downloaded here:
[URL].........
The download link and tutorial on how to install it is all in the link above. Once you have that all set you can now launch Photoshop to create your icon image. Once you have launched it, create a new document with the size as in the image below.
[URL]..........
Create the image you want. I used a simple one by using the custom shape tool by pressing "U" on your keyboard and with the basic blending options.
[URL].........
The reason why the image is pixelated is because it is an icon image. Since the image is only 256x256 pixels when you zoom in on it that will get you the pixely result. The reason why I zoomed in is so you can see it. But don't worry this is no the end result. Just continue reading and you will see.
So once you have created the icon go ahead and press
file>save as>(under format choose the ICO)>and choose the name that you want to name it. And save it in your C: drive. You will see why to save it in your C: drive in a sec.
[URL]..........
So now that you have created the icon and saved it now you can create the new library.
[URL].........
Name the library whatever you want I named it "Sample" for tutorial purposes. Notice how it gives you a default boring icon image for your library.
[URL].........
So now once you have created and named your library now it is time to get the icon image into place. Go to computer/c: Drive/users/YOU/ And now once you have reached this area you will need to access a hidden folder named "appdata" to do so press "Alt" then a menu bar will show. Click tools>folder options>and view. Find the option to view hidden folders then press apply then ok. Now we shall continue so AppData>Roaming>Microsoft>Windows>Libraries
Now you should see all the libraries including the one you just created.
[URL].........
[URL]..........
Once you have reached your destination then open a new text document with notepad and drag the library you just created in notepad. The result should look like this:
[URL].........
once you have reached this point click at the end of the second to last line down then press enter and enter in this information
<iconReference>c:"NAME OF ICO FILE YOU CREATED IN PS".ico</iconReference>
Example:
[URL]...........
Once you have entered that information go to file>save and the icon image should appear on the library you created.
[URL]............
Now you are officially finished. Go and spread the news and joy.
View 6 Replies
View Related
Jul 19, 2011
I have this icon and I'd like to use it on a website but with interchangeable colors.So, what I'd like to do is create a png file with solid colors simulating the background.And, where the actual icon colors are, use transparency. That way I can specify any color I want in the background and it will filter through!
how I could extract the different alpha transparency information to make the result similar to the pic shown above.I know it's possible as I've followed some tuts but the result isn't exactly the same.
View 6 Replies
View Related
Feb 4, 2013
I have been using Photoshop CS2 for many years and have constantly "lived with" a bug in Bridge whereby, instead of an image thumbnail, there is just an icon shown.
This is the same icon that appears before Bridge has read all the images to produce the thumbnails - but some of them get "stuck" and there seems to be no way to make Bridge "read" the image and produce the thumbnail. Pressing "View" "Refresh" (or PF5) does not work. Is there any fix I can download for this?
View 5 Replies
View Related
Jun 30, 2013
I am getting triple images on the work area from tool icons such as the crop tool, hands, etc. How do I get back to single image. I have reinstalled CS4 and windows 7 but have the same problem.
View 3 Replies
View Related
Oct 22, 2012
When I loaded some photo actions into my new PSE11 it show only a generic icon in the effects palette, not the icon from the maker so it takes extra time to search for the action I need. How can I get the icon from the maker to show as the icon in the palette?
View 3 Replies
View Related
