Before, whilst in Google Inspect on any webpage I could drag an image onto the Photoshop application icon on the dock = opens up in Photoshop + with PNG transparency.
Now this has stopped working for an unknown reason about 2-3 months ago after updating. I'll drag the image over the application icon on the dock as before, but then nothing opens. As a result, my workflow is now more inefficient and inconvenient.
I have my PS CS file browser preferences set to "High Quality Previews" and the previews look great--sharp and crisp! However, when I actually open up the image it doesn't seem as sharp--it's a little soft.
What is the "high quality preview" doing to make it look so sharp? Does anyone know what settings the preview is using?
I want my actual images to look as sharp as the previews! It seems like a major teaser that the preview looks BETTER than the opened image.
when i click on help, i am told that there is an error opening the default browser.
View 3 Replies View Relatedin cs5 to drag a 3d shape or object into a new document or another image was done by the move tool.what tool in cs6 extended replaces the move tool to drag images into another file or image.
View 2 Replies View RelatedI have got a GIF image of a push pin that I'm trying to drag onto a JPEG photo. I 've got both images open, and when I select the move tool for the push pin GIF, it starts to drag, but won't move across to the JPEG photo.
View 4 Replies View RelatedIt is my first time using inventor, so I am obviously not experienced with it in the least. Whenever I open any file, part, assembly, etc... the ribbon shows up fine, but the browser will not show up, and I cannot find a way to turn it on or off (if that is even a possibility).
View 4 Replies View RelatedWhen I drag an image into Photoshop, it is TINY. It doesn't matter the resolution of the image. It could be the biggest image in the universe and it shows up so small to where I have to use Free Transform every single time. Even the eraser is so small that I can't see it. It can be on 2500 but the eraser is a dot.
Is my Photoshop on a certain setting that I can change? This is my first time using the software on my new Macbook.
Just for clarification, are there any drawbacks to just dragging an image from my desktop onto an artboard instead of placing it? The image will not be autotraced, and will become part of a layout in my AI file.
View 6 Replies View RelatedYou know those "warp a celebrity" flash or java games where you click on part of the celebrity's face and drag the mouse, and the image warps? Can this sort of thing be done to your images in photoshop 6.0? (That's the version I have)
If this can't be done in Photoshop 6.0, does anyone know of a simple freeware program that I can use to warp images "celebrity warp" style?
Why does an image darken while dragging the window within Photoshop CS4?
Once the window is released with the mouse/pen, it snaps back to how it was?
Explained further:
Open an image in Photoshop CS4.
Click & hold the grey title bar at the top of the image.
Move it around within the Photoshop window.
It noticably "pops" - darkens.
Release the mouse/pen, image snaps back to how it was.
Weird
I've put a sample point on a section of the image, numbers don't change.
I've tried disabling "Open GL Drawing"
- Doesn't happen but...
- Image appears darker as per when dragging with "Open GL Drawing enabled.
- Numbers remain the same on the sample point.
Hope this makes sense.
Here are some specs:
Photoshop V 11.0.1
Graphics Card: NVidia GeForce 7950 GT
Driver Verssion: 182.08 (latest)
Windows Vista Business, 64-bit (Service Pack 1)
8GB RAM
-------setup:
ps cs 6
win 7 64
dual monitor setup
preferences -> perfomance as follows:
use graphics processor: ticked
advanced settings:
drawing mode: advanced
everything else in advanced is also ticked
problem:if i drag an image on my secondary (image editing) monitor the images saturation/color changes while i drag it. on mouse release it goes back to normal.this doesnt happen on my primary (system etc) monitor.yes i could probably workaround making my editing monitor my primary monitor, but i don't want to, because i want it free of windows bars and similar rubbish.
Using CS6 Mac, I am un successful in dragging and dropping a scanned image from PS to Illustrator.In the past i was able to do this with CS3 PC.
View 6 Replies View RelatedI'm writing because after reinstall the Mountain Lion (10.8.4), I realized that dragging an image from Chrome (29.0. 1547. 62) to the dock icon Photoshop CS6 the icon is not active and therefore the program does not open with the image, I tried with firefox (23.0.1) and the dock icon photoshop is animated and open photoshop but show the following message "Could not complete your request because Photoshop does not recognize this type of file." I tried with SAFARI and all fine, without problems. I note that before reinstallation and after doing a clean install (I do a back up, I formated the hard drive and install the mountain lion) this option worked perfect.
I check the following path ~ / Library / Caches / TemporaryItems that is where store the pictures as you take the browser and when stored in the folder but never open photoshop, I want to emphasize that opening photoshop and open a blank canvas, I can drag and drop (drag and drop) and the image appears, but with the dock icon anymore.
I have many theories but also not solve:
1. It's a permissions problem.
2. Any option is not enabled (OS X or photoshop) or not installed
3. Some kind of incompatibility, but again and worked without problems.
I just migrated from 2006 to 2012... I was able to get my old custom tool palettes into 2012 by opening the Content Browser and idropping them. However I noticed that these palettes are not 'refreshable' like they used to be. In the Palette Properties it says *This palette is not shared from a catalog*... after doing a search of that message in these forums I found this thread: [URL]....
I followed David's instructions:
1. Created a new Palette Group
2. Created a new palette in that Group
3. i-dropped tools from my custom catalog in the Content Browser onto that new palette.
Still there is no 'refresh' option...???
I'm refining some SVG files, imported into GIMP as paths. I added numerous guides on the images and drag anchors to the guides. All the paths consist of straight lines only. The problem is that on some anchors GIMP performs the "drag curve" operation instead of the "drag anchor". As a result, my straight lines become broken (curved).
The only solution I've found so far is to apply maximum zoom level, say 400%, and repeat the dragging in this resolution. This makes GIMP work properly, at least, I'm able to "drag anchor" as expected. But switching back and forth to the 400% zoom level is a bit annoying and inconvenient.
Is there a better way to "say" GIMP that "dragging anchor" is the "dragging anchor", not "dragging curve"?
images turning black+white when dragging one image onto another this has only just started happening?
View 2 Replies View Relatedway of opening images in CS2 where after opening they will appear in the middle of the CS screen rather then in the top left corner?
I can drag and maximize so they appear in the middle, but on reopening another image they default to the top left again, I would like them to always open in the middle?
When I drag a selection to the edge of the window enough to cause the artboard to move while holding a selection, the whole window fills with clutter built of the selection.
As soon as I stop dragging and release the mouse, the window clears and the move is completed appropriately.
I hope the image can go well with my description...
extend my sidebar so it fills the complete browser screen height wise.
How do i slice it up and put it in dreamweaver so that this is accomplished?
For an unknown reason, before I save an image for the web, I commonly preview the image in a browser. Now it seems to be applying the image as a tiled background image in browser preview. Where can I change this setting?
View 1 Replies View RelatedWhen I make an image in photoshop the coloring is great. Then when I save it and view it through the browser it is way darker then in photshop. I know that photoshop has it's own gamma settings but I don't know how to fix it to where what I make in photoshop to be the same in a browser.
View 2 Replies View RelatedI got single clip in desktop and it got an alpha embedded. If i drag that clip into the cfx , the clip will be interpreted correctly where alpha will be recognized. The problem in action is when i drag into action schematic, the alpha is ignored Smoke should know if there's alpha embedded then by default it should use it. ANother problem is when in media list , i add new media then click the clip twice (to grab F and M from the same clip), the result : i got blank alpha. Again it should load the alpha while there's alpha embedded . I think , this should become the dafault behaviour to deal with alpha. Although loading this clip in cfx schematic will solve the problem, i think the action still need to be fixed.
Also it should be cool feature if i can drag the clip from library and drop it in media list , and it will replace the media of the selected item in media list.
I'm having trouble importing images in Illustrator CS6. Dragging from finder doesn't work, nor does the "place" option. When opening an image in illustrator, all i get is a blank document.
View 2 Replies View RelatedI've been trying to select and area of a JPEG but the whole thing keeps moving around.
View 2 Replies View Related[URL]What I want to do is to extract the girl's image and save it with a transparent background as a gif, and then put it up on the web page I've created, which has a dark grey gradient background.
The problem is when I do that, the contour of the girl's image contains a lot of white space and what appears like brush strokes! The white space doesn't show up at all while I'm using the Refine Radius tool on a black background. It also doesn't show up when I save the image as a gif on a dark background layer in Photoshop. It only appears when I save it on a transparent background and display it on my web page!
Here's the image, saved on a dark background:
Here's the image, on a transparent background, displayed on the live web page [URL]
My Photoshop Elements browser won't display my Photoshop image files. If I click on browse the files all relate to general computer files. How do I get it back?
View 6 Replies View RelatedI opened the drawing and then from the drawing opened the model. In the drawing it is showing the 4th instance of ROUND CRS-032175 X 33 as an assembly. It also is not showing in the view and yet the visibility is checked. AI2012 SP2
View 1 Replies View Relatedi create a new material and i do it active. I cant go to browser for an image to be used as a texture map.
View 2 Replies View RelatedThe entire image is what is blinking, while the photoshop tools remain on.
View 5 Replies View RelatedI am trying to use the Browsernode.addchild method to add an occurence to an empty browser folder. The code fails at this point and I gett an error pointing to the line "Call oTargetNode.AddChild(oSourceNodeDef)". I can add the occurence with the browserpanes.Reorder method without issue if the folder is not empty. The code is pasted Below.
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 29338 StartFragment: 314 EndFragment: 29306 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
DimPrcsTpAsStringPrcsTp=InputListBox("Process Type?", MultiValue.List("ProcessType"), Parameter("ProcessType"), Title :="Select Process Type", ListName :="Process Type")DimRtgNameAsStringRtgName=PrcsTp&"-"&Parameter("NoRtgsInc")+1MessageBox.Show(RtgName, "Title",MessageBoxButtons.OKCancel)DimoAsmAsAssemblyDocument=ThisDoc.DocumentDimoMatrixAsMatrix=ThisApplication.TransientGeometry.CreateMatrixDimoOccAsComponentOccurrenceoOcc=oAsm.ComponentDefinition.Occurrences.AddVirtual(RtgName, oMatrix)DimoCompDefVirtualAsVirtualComponentDefinition=oOcc.Definition'CREATE AND SET THE
[code]....
When I press F1 Inventor opens the help on my default browser (Chrome), but when I click the bynocular it uses Internet Explorer.
Is it possible to force Inventor to use a browser of my choice or the default browser?