AutoCAD 2013 :: New Tool Palettes Will Not Save
May 28, 2012
I have just updated from 2012 to 2013, I've transferred all the necessary support file as I always do.I am trying to add a new Pallette to my custom Pallette group. However, when I try to drag blocks into the new Palette AutoCAD won't allow me to do so. I have to drag them first into another existing Palette, then drag them into the new one.
Then I have the problem of the New Palette disappearing when I next open Cad. Even after the New Palette .atc file appears in my support folder and I save my Workspace profile.
View 4 Replies
ADVERTISEMENT
May 24, 2013
Im looking for a way to be able to get the latest .ctb files and tool palettes, weekly auotmaticly,
almost like task schedular in inventor, so when the .ctb of palettes gets updated, the users get it autmaticly,
tried inventor task schedular, by getting the latest folder, but the file types is not supported.
View 4 Replies
View Related
Sep 16, 2013
I'm using AutoCAD 2014. When we upgraded from 2013 I migrated all of my tool palettes and settings over to 2014 earlier this year. All seemed normal up until Friday when I created a new palette. That part was normal, but when I tried to drag a block from Design Center to that tool palette it wouldn't populate. It seemed like it was going to, it gave me that typical >---< under where the block would show up in the tool palette, but when I tried to release it in the palette, nothing.
Additionally, if I right click on a directory/folder in design center and select "Create Palette of Blocks" (which I have done a million times before), it will create the tab of the directory/folder I have created but does not populated it with the blocks within that directory/folder. Leaving me with a blank Tool Palette.
View 1 Replies
View Related
Nov 28, 2012
At my previous place of employment I used ACAD 2010 and ACAD 2011 Design Suites. One of the programs had tool palettes and/or design centers that enabled me to build my structures choosing blocks of wall types, windows, casework and doors, trees via a palette all in 3d and 2d form. I was able to change my views all around the 3d model and walk thru it with a camera. I did several homes using this program. I don't know what the difference is but ACAD 2013 does not appear to have it.
View 6 Replies
View Related
Jan 30, 2013
I want to share toolpalettes for multi-users in a network.
i create a share-folder with full-write-and-read-status for the cad-admin. then i added the folder into the _toolpalettepath-definition in the acad-options. all other users only have only-read-status for this folder.
this folder will be define in the first position of this list.
in theorie this will work - but now a costumer test this configuration. the problem is, that texts and seperator-lines in the paletten-defintion change the order - like example.
In other postings i read the name *.aws-files - but i did not understand the meaning of this file.
View 3 Replies
View Related
Sep 23, 2012
I've just installed 2013 and Service Pack 1.1 and downloaded (and installed) off line Help.All the Tool Palettes except my custom ones, are blank.
I can't find the command line, even after typing "commandline".And the search feature doesn't do anything.And I can't find where to send a helpdesk plea for support.
View 3 Replies
View Related
Nov 19, 2013
I just made the transition from AutoCAD 2009 to 2014 last week so I am unfamiliar with this version.
1-It's possible to have variables that are attached to the file?
2-It's possible to insert a block of ToolPalettes by "forcing" the layer and size with the variables created.
ex : block outlet created on the layer 0
Drawing A:
variable layer = power
variable size = 1/4
When I insert the block outlet from my Tool palettes it will be on the layer "PPOW" and perform a scale of "48"
Drawing B:
variable layer = LowPower
variable size = 3/8
When I insert the block outlet from my Tool palettes it will be on the layer"LPOW" and perform a scale of "32"
View 9 Replies
View Related
Mar 15, 2013
I lost my Tool Palettes Design Group, I still have the same profile the only thing is showing is the menu bar, how to get it back
View 2 Replies
View Related
Oct 14, 2013
Due to circumstances beyond my control the directory path that my tool palettes are mapped to needs to be changed.
From: T:Toolpalettesetc...
To: X:Toolpalettesetc...
I have hundreds of blocks in the tool palettes that are looking for their source file on the "T" drive.
My brain says "Find / Replace T: with X: " using Notepad in all of the ATC files.
Is there a better method to tell those blocks to look on the "X" drive?
View 2 Replies
View Related
Aug 20, 2013
I just made myself another toolpalette, and the icons/images don't show up.Well, none of the icons/images show up except for the Junction Box (J with a circle around it.)I found that the Junction Box block is the only one that is NOT Annotative. All the other ones are ANNOTATIVE (as they should be.)
In Windows Explorer, it looks like images were saved for each new block I inserted into the toolpalette, but the images are blank except for the Junction Box of course. Is there a special way you have to put your Annotative blocks into a toolpalette so the icon/image shows up??
View 3 Replies
View Related
Oct 23, 2013
I know there are workarounds, but why doesn't Adesk add better support for shared network resources such as tool palettes (with groups)?
View 3 Replies
View Related
Jun 24, 2013
We have just recently install Building Design Suite Standard 2014 and the tool palettes DO NOT work.
Clicking on the standard palettes that load with ACAD will not even work. We have also tried to make new ones and the will not MAKE (for lack of words).
Here is the Autocad warning it gives us:
Unable to execute the tool. Possible causes are:
-The tool is not registered properly. Please check your installation.
-the tool is from another application and is incompatible with the current application.
We are running a new copy and it IS registered.
View 6 Replies
View Related
Apr 5, 2013
In our company we have a Tool Palette guru. She has READ/WRITE privileges to a Tool Palettes Development folder on our network. When she has an update to share with the masses, a network admin goes into the Tool Palettes Development folder and moves the corresponding files and folders to Tool Palettes folder where all CAD users have only READ access. All users point to the Tool Palettes folder on the network as well as a folder on tehor local machine so they can create their own custom Tool Palettes.
We have several users that have to reload their Tool Palettes every time they login to their workstation. Also, whenever a user logins to a different workstation, the Tool Palettes images have to be reloaded manually.I'm thinking there has to be a way so that
1) once the Tool Palettes are loaded for a user they don't have to be reloaded and
2) we don;t have to reload the Tool Palettes images when a user changes workstations.
View 2 Replies
View Related
Dec 8, 2011
I have a little problem, here at work we want to work with tool palettes, but when we select a hatch from the tool palette and want to hatch a object it says to specify insertion point.
We at work here we are drawing with polylines so we would like to select the object instead of specifying a insertion point. How can we change it in the toolpalette ?
View 1 Replies
View Related
Jun 24, 2013
My pc is being upgraded next week (while I am away on holiday). The IT guy will be adding 4GB of RAM and will be switching from 32bit win 7 pro to 64bit win 7 pro, obviously, this will mean a clean install and re-installing all my software. I have my tool palettes set up with many blocks, leaders, hatch patterns etc and I want to know if there is a way I can save my tool palettes and then reload them onto the upgraded pc with the re-installed AutoCAD LT?
View 5 Replies
View Related
May 9, 2013
I'm using AutoCAD MEP 2014 (though it's present in all variations).
I am using OOTB settings to eliminate network permissions as my issue.
I open my ACAD to an OOTB template file. Create a new tool palette, call it "CS" for now. When I try to add blocks to my palette, I get the black circle with a line through it. I get the same result when trying to add to existing OOTB palettes.
I am a network administrator and administrator on my machine, permissions shouldn't be the issue.
Checked my Options->Files and everything is pointing to the OOTB locations on my C: drive, nothing special.
The .dwg files are on my desktop, so there's no network sharing issue.
I tried going through Design Center (ADCENTER). I browsed to the folder containing the .dwg files, right-clicked and selected "Create Tool Palette" or something to that effect. It created an empty palette with no tools.
I've also tried inserting a block from another OOTB palette, no issue. Then whe trying to drag that block back to the tool palettes, it doesn't let me.
Toolbars/Panels are not locked, though I don't think that makes a difference.
Hmm...trying to think what else I've tried...I've Googled for a couple hours now, obviously with no luck.
View 6 Replies
View Related
Mar 28, 2013
I am having an issue at my office when I open or save a drawing (I'm using Acad 2013) people using 2011 Acad Architecture who later access the file cannot use their tool palette or detail component manager. The tool palette will pop up, but when they try to drag something out of it, there is an unspecified error. The detail component manager in Architecture will not even pop up for some reason.
View 0 Replies
View Related
Mar 5, 2013
The best way to share my tool palettes. I have created blocks & saved them on our shared drive, I have set my tool palettes up how I want them, Alphabetical order and set the size for the images to display.
I now want to give this palette to all my colleagues to use as standard for when they open their CAD.
View 9 Replies
View Related
Mar 29, 2012
I use ACA 2012 on two seperate computers and would like to be able to have all my custom tool palettes, blocks, customizations, etc.. to migrate to both computers. I.e. I add a new tool to a tool palette on one computer and then when I'm working on second computer that new tool appears in palette in correct location. I would think the easist way to do this would to be to share the location of the tool palettes, customization files, etc.. at a common place (network share) but am unable to find all the files and settings to do this.
View 1 Replies
View Related
Apr 12, 2013
How to create a tag and add it to my tool palettes for future use?
I am using AutoCAD Architecture 2012, and I want to be able to tag the bottom elevation of slabs in my drawings. I found I can create a tag by using the DEFINETAG command and I created text in there that is set to display the bottom elevation of slabs. I'm stuck as to where to go from here. I can't actually "tag" anything with this, and I don't know how to add it to my tool palettes.
View 2 Replies
View Related
Dec 18, 2013
When I start AutoCad and also if I try to select the Refresh icon on the Pallett, I get a pop up that says "There was an error while refreshing. The palette could not be refreshed" Could there be a path that is broken, if so where would it be?
View 2 Replies
View Related
Sep 2, 2012
i install autocad civil 3d 2012,but in tool palette i did not find assembly . how can i add it?
View 4 Replies
View Related
Apr 25, 2013
Just on to ACA 2014 and noticed many of the detail tabs missing. No longer interior, exterior, etc. tabs and can't find how to replace them. Also Detail compnent manager toolbar icon gone and can't find command in CUI?
View 9 Replies
View Related
May 27, 2013
I have imported atc files which were created in standard AutoCAD 2010, the palettes (atc) files import without a glitch the tools contained on them work perfectly. However adding new items fails despite all files not being read only also if a add a new palette nice though AutoCAD ADT will create one it wont actually allow me to add anything to it...
View 2 Replies
View Related
Apr 23, 2013
I have a problem with scaling and rotation when I apply one tag coming from palette tool. I use ACA 2013 METRIC and this problem did not exist in 2012.
I attached a file to do the test. Drag the tag to your tool palettes in space and try to apply the design to see the problem.
View 2 Replies
View Related
Sep 17, 2008
My lead wants a group of all the tool palettes that i have created for all users to use.I have exported all of the palettes to a location on the network. I also exported the group to the same location. I had the user redirect the tool palette path in the Options>Files. The problem that i am running into is that when the users are loading up the tool palettes, they have to import each tool palette seperately then add them to a group.
Is it possible to have the tool palettes in a location on the network and have each of the users import the group only?
View 9 Replies
View Related
Feb 12, 2013
I have updated the drawing file with the paper templates which has the paper sizes as blocks. I have deleted the Paper template palette and gone via the design center to create the updated tool palette which should have the updated paper template blocks. For some reason it is still inserting the old blocks even though the new source file has the amended details.
View 2 Replies
View Related
Apr 4, 2008
For some reason, all of my customized objects in my tool palettes have disappeared. The tabs themselves are still there, but everything on them is gone. I found all the files for my missing objects listed in my Tool Palette folder and I verified that the the path is set up correctly. I'm currently using LT '07 on Windows XP.
View 3 Replies
View Related
Aug 23, 2011
I have a custom tool palette all made up, it has three palette sets and 8-12 palettes per set.
Now, is it necessary to add the palette sets and palettes to the content browser before sharing the .atc file around the office? Also, once added to the content browser, I cannot change the properties of a block e.g. scale, layer, rotation prompt etc..
View 1 Replies
View Related
Oct 28, 2011
Is there a way to alphabetize tool palettes / tabs. The tool palettes are great, but a lot of times I have a bunch loaded and I can't find the one I want right away. It would be much easier if they were in alphabetical order.
View 1 Replies
View Related
Oct 17, 2011
I created some tool palettes that have all the standard blocks for our company. I want to share these with all the other designers. The help file suggests opening the "Customize Palettes" dialog window, right clicking on the palette and clicking "Export". Sounds so simple.
When I right click on the tool palettes, the only options available are "Rename", "New Palette", and "Delete". How can I share these new tool palettes?
AutoCAD MEP 2012.
View 8 Replies
View Related
