i have textas these
HCR (R) L=6.40 S=0.638
HCl (R) L=6.50 S=0.64
HCR (R) L=6.50 S=0.7
AND ALOT OF THEM IN SAME DRAWINGS WHAT I NEED. I WANT TO REMOVE ALL TEXT AFTER WORDES S=******* IN ONE STEP
So I want it to become as this:
HCR (R) L=6.40
HCl (R) L=6.50
HCR (R) L=6.50
How can you changed the text editor to a word processor like word?
View 1 Replies View RelatedI want the background of the picture and don't spoil the it after removing the words and the apple!
How should I deal with it?
In IV 2011 can text be word wrapped in the defined text area.
View 2 Replies View RelatedI have a Command Method which has a loop that opens and commits transactions until the user is finished with it and exits.
I would like each transaction to be undone separately but the undo command undoes the CommandMethod (along with all the transactions that occurred while in the loop)
Do I need to use the COM StartUndoMark and EndUndoMark to get this working?
units.jpg
how to remove the red marked word units to be removed
How to export the .dwg file to Microsoft WORD as a base/background for further word processing on top? Is there any direct way to convert the file that can use in WORD?
View 1 Replies View Relatedit's possible to have a standard text filled in the "Authorization" and "Organization", so that I don't have to enter the same text each time I want to export a STEP file.
Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
The problem just came today while i tried to copy/paste text from Ms Word. As I usually do it asks me about formatting options before pasting text but today its not working the way it should. It simply pastes plain text without all formatting I did to my document in Ms Word. I even tried to repair my software but nothing worked.
View 1 Replies View RelatedI'm trying to copy editable text from a Word file into the text editor for GIMP. Before I upgraded to 2.8, this was possible, but now it seems not. I'm on 2.8.4 using OSX Mavericks on a Macbook Pro.
I'm a terrible speller and since GIMP doesn't support spell check, this was always my workaround.
I have somehow reversed the process of changing a sky in my photo so that when I get to the point of painting in the sky from the 2nd photo, it is painting with white (not black) that brings out the background I want on the original photo. Where have I gone wrong? Is there anywhere I can go to find a detailed step-by-step process for doing Layer Masks?
View 1 Replies View RelatedIm trying to link mtext in an acad drawing to a word document. For example, when I write a legal description based on a drawing, in word, I want the text that I am referencing in the drawing to be linked. In other words, if I change the text in the drawing, it will automatically change the text in the word doc.
View 3 Replies View RelatedI'm using an iMac and Illustrator CC. I created a text area box. I want to place text from an outside Word document into the area box. When I go to File>Place and locate the text file, I click on Place. When I'm returned to my Illustrator CC document, the original area box is deselected and my cursor is loaded and ready for me to drag out a new area box. Shouldn't the placed text fill the original area box?
View 3 Replies View RelatedI'm using Autocad 2013 and have problems when I want to copy some text from Word file. I'm doing that because translating text, which is translated already in Word. I.e., I have a text written in English in Autocad and now I have to select it all, and paste text copied from Word. It changes color (now it's "by Block"), but I change it back to "by Layer; and changes it's style even if in Word it is the same style as in Autocad (it is Arial in Word and in Autocad, but when I paste copied text it is in Times New Roman.
Is there anything to set up not to change this text, because I have a lot of copy/pasteing to do and would save me a lot of time?
How do you word wrap leader text?
View 6 Replies View RelatedI was telling an engineer the other day that I could probably insert his general notes from MS Word into AutoCAD and create nice clean pdf files of the CD sheets that he could email to clients. On second inspection I could tell that, yes I could copy, paste it in, but fixing all the formatting would be a nightmare. Is there any way to retain the formatting such as numbering, tabs etc. when bringing it in to AutoCAD? The idea is to have it be an editable document, so I don't want to just bring it in as a OLE object, pdf or scan.
View 7 Replies View RelatedHow do I export all the text from a PS file to a text file like word?
View 1 Replies View RelatedI wrote the sentence "The quick brown fox jumps over a lazy dog" in Times New Roman regular 12 pt. in Illustrator CS2. The file was saved as a pdf at "press quality." I wrote the same sentence with the exact some font in InCopy CS2 and exported it as a pdf at press quality. As shown in a zoomed-in screenshot from the respective pdfs, the text from Illustrator (top example below) is slightly different than the text from InCopy (bottom example below):
Is it just an unavoidable artifact of the way pdfs are rendered? I realize it's a minor gripe, but even slight bugs/features like this would never be tolerated in a professional publishing environment. What am I not understanding about vector images and/or pdfs?
I have CTR-Z mapped to step backward.
Using two different shortcuts for "undo" (one step back) and "Step Backward" (Multiple steps back) makes no sense to me. As such, I rarely use the regular undo, and do not have it mapped.
The case:
When I switch to a new layer, do a brush stroke and undo it, photoshop treats my undo as a switch back to the layer I came from. This happens a LOT, and not just to me, but to a lot of designers I know (I'm a GUI designer at a game company). Some of them have even formed a habit of "erasing" a bit in an empty part of the layer, just in case the'd later want to undo. That's bad.
My proposed solution:
-First undo my stroke, Leave my selected layer alone.
-On a NEXT press of "Step backward" change my current layer to the one I came from.
Is there a fast, acurate way to convert a Bill Of Materials done in autocad text (I could convert it to mtext if I have to) onto a word document?
I am able to do it line by line with ddedit /copy but what a hassel.
if the command line is docked and you hit F2 to bring up the text screen,
there is no word wrap.
e.g.
type (entget (car (entsel))) pick an object, and then F2 for text screen.
The result is all on one line and you can only view it by scrolling sideways.
The same happens when you list a few lines of Mtext.
If the command line is not docked there is no problem.
Everytime I copy text in Word and paste it in Illustrator CS4 to edit, Illustrator considerably slows down.
View 2 Replies View RelatedI am trying to do something but it doesnt seem to work.
I have made a background paper in Photoshop. I want to copy a text from a word document and paste it into the paper in PS.
I have tried several things, but nothing works. Then I tried to make the paper a png, and insert it into word to copy in the text there instead, and I couldnt get that to work either.
I want to place a word into a square box and it should be in the centre of the box. How can I center it? I want equal spaces in between the word and the box for all four sides.
View 11 Replies View Relatedit's possible to copy and paste form Word and keep the formatting. I've tired using the text tool but the formatting is lost and I've tried direct pasting but it results in a huge size. Resizing the result leaves the print blurry.
I'm trying to add formatted text to an image size of 490 x 680.
im creating a photo strip and want to add text at the bottom after the last picture, how do i add text or insert word art?
View 2 Replies View RelatedHow can I copy text from a word document into video studio pro x4 to save me having to type it all again ?
View 3 Replies View RelatedI've been importing Microsoft Word text just using the clipboard. That is, I'll open Microsoft Word, open my document, select all, copy, and then go to InDesign and paste. InDesign gives me a text block with my text and I just re-size the columns. The text comes in all weird and I have to stylize it, of course. Sometimes I get some junk like nonbreaking characters and other hidden characters which screw me up until I figure out what's going on. My question is: what's the best way to import Microsoft Word text that will introduce the fewest errors?
View 4 Replies View RelatedI need to make a pdf to upload my book to Createspace. I've read that I can format the book in Word 2010 using one of their templates.
I've also read that it won't handle photos well.
So I'm wondering if it's possible to import formatted text from Word into Xara Designer Pro 6, then add photos, then export a pdf file.
I tried importing one formatted page (I'm doing 6X9 inches) into a 6x9 page in Xara, but it pastes the whole thing as a lump that is the wrong size, way too big, and I would have to try to shrink it...
Is there a way to do this simply, that would be accurate for every page of a book?
I have a number of textures of marble, stone, rock... much of which I use in construction projects within Second Life where I am a Builder.
I have a small project in the works to produce a stone structure; that has some text engraved into the stone. I have the text typed up in MS Word. But when I copy/paste that into Paint.net; there is no left/right/center alignment; and the text has no 'word wrap'... it just pastes it all as one single reeealllllly long single spaced line... like there is no bounding box to contain it. Further more, I am not sure how I could make it appear as though it were 'engraved' ...
Now I do know how to make/add Layers... I use Paint.net often to manipulate many of my existing Second Life textures that I buy from within Second Life, and upload onto my computer to 'tweak' them. Sometimes I'll add an alpha transparency layer of Spanish Moss to a Stone Wall, for example, then re-upload that back into SL.. and I now have a building with stone walls, and spanish moss hanging over the walls to give it more unique look.
I know I can create a "layer" of Text, that can then be added over a stone or marble texture image...But I can't figure out how to get that text to wrap or center, or appear engraved
How would I acquire these features, is there a plugin that does all this for text?
I've been attempting to recreate the text effect on the word BOLLYWOOD.
I've played around with applying a smooth cornered stroke - extruding then attempting to warp the text but have had no joy...
I'm looking to get this looking as close as possible.