CorelDRAW Graphics Suite X3 :: Text Is Full Justified
Apr 13, 2011
In the attached image the last line gets separated out. The text is full justified and I tried things like hyphenation etc which i read around here but didnt work and still the text in the last line each word gets separated out.
.I've just finished a poster and I need to send it over to the printer in jpeg format. I would like them to have a full bleed on the poster, how do I achieve this? I
Where can I find the default full-color pattern fills in CDX6? I don't see a folder for Patterns in the Corel file in programs. I see a Patterns folder in CDX5 but it doesn't have the default pattern I need. I need to change the color. I noticed that custom made patterns go into My Documents/Core/Vector Patterns.
I have 2 issues to deal with. I have a poster I've created in 11x17 but I want to make sure that I get a full bleed when I send it over to the print shop, how would I do this?
issue#2: I will need to reduce the size of the 11x17 to a 5.6in width 7in height. How do I do this? The reason for the size reduction is because I need it for newspaper printing so I need to make sure to keep my 11x17.
In Connect I see only blank thumbnails of my .cdr files. The nice thing of this program should be thati can scroll through my files and look at large thumbnail So I know what iám working on.
I've a problem to open an old X4-Coreldraw file. The first time I can open it - when I want to save this file CDraw says that the file will be changed to the X6 Version. I say OK and save the file. The 2nd time I'll try to open the X6 file again then the Error occurs! I changed my settings in CDraw to a local dir c: emp, also to a new drive - but nothing happens! All the drives have mor than 400 GB free space! I hope this will be enough.
In CorelDraw X5, I consistently at times receive an error message stating "File Copy Error. TEMP Drive or Output Drive may be full". My temp drives have all been emptied. How to overcome this error message?
I have saved a file in corel. on the second day, when i want to open the file,is writting: "File Copy Error" TEMP Drive or Output Drive may be Full" Is there any posibility to recover the file. The recovery toolbox can not recover the file.
I have a complex (includes tints) clip art object that needs printing in a specific pantone color I just convert it to grayscale using edit>find and replace objects>color mode. then print it as a black plate and just use another color on press.
Today I had to send off artwork to another printer. Dang. How to install a macro. Import clip art to be modified to a new document, do not do this in your working document.
Use Edit>Find and Replace> Find Objects Replace a color model or palette. Next Leave as is except change Replace with color model to "Grayscale" Next>Replace all
Repeat 2-4 for 'outlines' if you have them.There you now have a gray scale clipart, but the fun continues!You'll need to know what pantone color you want to use. Let's say Reflex Blue. Make a square and color it Reflex blue from a pantone palette.Duplicate the square and create swatches at 90% 80% 70% etc down to white.Select these square swatches, then Windows>Color Palette>Create Palette from Selection. Save palette with a temporary name, it is only time use. Or you could call it 'Reflex Blue'Now go to this website and download the macro "limit colors" URL...
Drop it in your GMS folder in under your username to install the macro. (might have to save the drawing and restart Corel...)Once you reopen your now grayscale clipart document, Select the clipart. Run the macro (Tools>Macros>Run Macros) LimitColors.Posterize select the number of colors in your new palette if you created 10% swatches, go with 11, if you did steps of 20% then you'll do 6 (don't forget white).Run the macro LimitColors.LimitColors and select your new palette you made in step 9.
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
Often whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
I had several CorelDraw documents that crashes on me, and the auto-backup did not work.
In all these documents, if I open the text paragraph window and typed on it, the entire program will crash if I exit that window after finishing.
I discovered that if I typed directly on the text paragraph, it will not crash. That means do not open the text paragraph window to do editing. But this makes editing very slow since it seems to be more memory intensive.
Strange the auto-backup directory/folder always do not have my backup files too.
A client sent me their logo where the name is straight across. They would now like to wrap it around the circle in their logo... They do not know the name of the font, what the font couldn't id it, not much response on their forum...
Is there a way to fit text to path, where the text has already been converted to curves?
Is there a setting to change the text frame size when pasting a block of text?
For example if text is pasted into a blank page with the either the pick or text tool active the text frame on each page is 8.3"x10.8" on a 8.5"x11" page. the same on each succeeding page until the text is less than a full page.
I would like to set the text frame at 7.5"x10" for pasting in text when the text will need unknown number of pages.
Is there a setting to change the text frame size when pasting a block of text?
For example if text is pasted into a blank page with the either the pick or text tool active the text frame on each page is 8.3"x10.8" on a 8.5"x11" page. the same on each succeeding page until the text is less than a full page.
I would like to set the text frame at 7.5"x10" for pasting in text when the text will need unknown number of pages.
Is it possible to lock a text box to prevent it from moving but still be able to input & edit text?I want to make a drawing template in CorelDraw x6 using text boxes for "non Corel friendly" people to use but need the actual text boxes to stay in the same place all the time!?
how to curve text within a shape, as paragraph text, not artistic text? (See my attached image.)
I have drawn the shape, inserted the text as paragraph text, but the text always wants to sit straight. I am so frustrated as I can find a workaround in either Corel or Adobe CS products. I have tried using artistic text in Corel, but have to do it line by line - and this brings other problems, such as I cant justify each line with each other, and sometimes a character jumps up relative to the other characters and the entire paragraph does not taper in...so this is not a solution, apart from the fact it will take me FOREVER to insert line by line....I would like to treat the text as a multiple line paragraph, and follow the shape.
I am using Corel for driving a fiber laser through a dedicated Net connection not available to the rest of the network and it and my computer are right next to the switch.
My problem is that when I send a job from the PC to the laser it works fine. If I make a small change on the graphics, I save it and send a new job to the laser. Quite often, some part of my grapics is left off the plot even though I didn't touch that graphic or mod it. So I send the job over again and now somewhere else is missing some of the graphic word...usually a word or a letter or number. I usually turn off the computer or get out of Corel and come back in and it is fixed. That doesn't sound like a network dropped or corrupted graphic. I have tried turning off the laser with Corel still up and it doesn't fix the problem when I bring the laser on line again.
In the last 2 days Corel has decided to start changing Artistic Text to Paragraph Text when I copy & paste it across documents, completely changing the font, size & colour of what I am copying.
I've just done a factory reset & it's still doing it.
I don't recall doing anything that would change a setting.
The text I am copy & pasting are disclaimers that are all set on 1 document & I copy & paste them to a proof as needed.
I'm making tickets and i need to add tickets numbers, from 1 to 1000. Print & Merge doesn't fit for me.So I want to change text tag for example: "<text>" to text which will be different (1, 2 ,3 ,4 ,5 ,6 ,7 ...) Wagenaar where the code finds word "Andorra" and change it to "Andorre".
Public Function FindReplace(ByVal str As String, ByVal toFind As String, ByVal toReplace As String) As String Dim i As Integer For i = 1 To Len(str) If Mid(str, i, Len(toFind)) = toFind Then ' does the string match? FindReplace = FindReplace & toReplace ' add the new replacement to the final result i = i + (Len(toFind) - 1) ' move to the character after the toFind Else FindReplace = FindReplace & Mid(str, i, 1) ' add a character End If Next iEnd Function. [code]...
I am having trouble resizing text boxes with text in them, so that the text scales with the box.If I convert the text box the curves, it messes up the formatting when I add an outline to the curve because the text box itself is given a outline.
Is there a way to automatically condense text in a one line text box, I have linked text boxes vertically and want to paste a list of names into them, and if a name is too long I want it to condense to the text box.
I know how to do this in print merge with the envelope tool but not in a text box.