I have used illustrator for years and all of a sudden when I justify text and add a soft return to knock a 'widow' or single work round the text no longer justfies! WHY? and can I turn this dumb feature off...?
View 3 Replieswhen i add a text to and make it full justify, it leaves lot of spacing and some lines have more spacing between words than other in short it does not look good , how can i make it proper looking
View 4 Replies View RelatedIn the dragged state, I don't want to use 'As Composed' because the label is composed to be parallel to the line, but I want it to flip to horizontal to the view when dragged. This is working fine with 'Stacked Text'
What is not working is the text justification. I want it to remain centre justified, as it is composed. But there doesn't seem to be any option for this when you use the 'Stacked Text' option for the dragged state. I thought that setting the 'Leader Justification' to false might do it, but that just makes it always left justified. Am I missing something here? Is there no 'Top right/bottom right/middle center/top left.....' option for Stacked Text? And if not, why not?
I'm in 2011.
the last 4 justifcation tools in the paragraph palette i can't select
View 1 Replies View RelatedI am right and left justifying Times New Roman italics text. At the right side of the text box, the last letter of each line is partly cutoff/disappeared. It's like the right side of the text box is too tightly positioned around the text.
View 12 Replies View RelatedIn the attached image the last line gets separated out. The text is full justified and I tried things like hyphenation etc which i read around here but didnt work and still the text in the last line each word gets separated out.
View 7 Replies View RelatedWhy does no node appear on Left justified text, yet it appears on right and center justified text?
View 8 Replies View RelatedI have a couple of different files that I'm working on that I want a particular text box left-justified. I will get it left-justified and save the file, but the next time the file is opened the text is centered.
View 2 Replies View RelatedI need to do some text amends and need to show hard returns etc.. Where is the show invisibles in PS6?
View 4 Replies View RelatedWhy is there a difference between the text from the soft fx and the text in action? If you look at the attached picture, the 3 lines look slightly different although they shouldn't. The first line was written inside the soft fx.
The second line, with an ugly outline, is the 3D text, and although it's the same font, it looks thinner here.
And the third line, which I think looks a little too soft, is with AA turned on in action.
So why can't I achieve the same look in action, as in the text soft fx?
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
I've recently upgraded to CS3 from CS1,
When using the text tool in CS1, shift+enter would give you a new line within the existing paragraph (I believe it's called a soft return?), so it keeps the leading but doesn't add the "space after paragraph". In CS3 this doesn't work and it's really screwing with my ability to create decent web page mockups.
I'm trying to add a soft shadow in 3D text. I've succeeded in getting the shadow but can't find a what to soften... blur... the shadow. I m sure it's a button some where.
View 2 Replies View RelatedI am dealing with text in some non-unicode encodings. The text includes the soft-hyphen character (0xAD) - which under ISO 8559-1 encoding is rendered as a hyphen.
When I paste this text into photoshop, the soft-hyphen disappears. The soft-hyphen is still there (if I copy the text and paste it back into notepad it is visible, also it shows up in the text layer's name) but it is not being rendered.
Now in Photoshop 7 the soft-hyphen renders as expected so I believe this is something caused by Photoshop's transition to Unicode in later versions (I see this 'problem' in Photoshop CS3 and CS4 - don't have CS or CS2 to test).
* Is it possible to change the type tool's behavior to the older version - i.e. to show soft-hyphen?
* Would anyone know if CS/CS2 behave like this as well?
I need soft-hyphen to be rendered because I am working with an old/legacy font which 'renders' soft-hyphen as a different glyph.
This has happened repeatedly for me, importing a slate with soft text from 2012 corrupts my default library. I get-
"The following bins are corrupted: Default Library Choose recover or hit the Enter key to try and recover a backup version of the bins."
Recovering fails and I'm forced to hit cancel which let's me into the project with my media gone.
I'm working on making a really awesome pic but I'm stuck. The style I use in all of my pics is by making a new layer, changing it to color mode, then making rainbow colors with a really soft brush. Everything was going fine until I threw some text in there. Now when I paint, the text stays the same color!
View 2 Replies View RelatedCan Adobe Illustrator match or simulate inner bevel effects of inDesign and Photoshop? If it is possible, how to get a soft inner bevel on type or vector shape in Adobe Illustrator CS4 that can be set up to be identical (or, at least, very close) to the layer styles of PS and the type/fill/stroke/object effects of ID. So far, I have not been able to achieve the same look with 3D extrude and bevel in AI. I want a solid red object with a soft 16 point white-tint highlight and a soft 16 point black tint shadow. If it is not something that is possible with 3D extrude and bevel settings, this something that must or could be done manually with the gradient mesh tool?
View 5 Replies View RelatedI have a blue shape with a feathered edge on a black background. The color transitions from blue to grey to black. I want to transition from blue to black without the soft grey line.
View 7 Replies View RelatedI want to know How to achieve this circle that has VERTICAL soft rounded dash.
http:[url].........
I have switched computers from my laptop to my workstation. My laptop has an Nvidia card FX2500M, and my workstation has an ATI Fire V5600.
I work with the ribbon minimised to tabs. On my laptop, when I click a tab the ribbon opens directly below the tab (i.e. justified to the left of the screen); but on my workstation, the ribbon opens below the tab but justified to the right of the screen. This means I have to move the cursor back and forth across the screen.
Is there a Reg setting to change the justified back to the left of the screen?
When the ribbon minimise is on other settings (e.g. minimise to panel tiles) the ribbon is justified to the left side of the screen.
Inventor Pro 2012 with SP1.
I am trying to determine whether or not the following is a bug:
1. Begin creating a new block using the block editor.
2. Add an object (circle) for reference.
3. Add an attribute with the following properties: Constant, Visible, Value (i.e. "34"), Justify: "Middle-Center." Make the tag
4. Save the block, exit block editor.
5. Insert the block into model space.
At least on my system, the constant attribute always shows up left justified. If I explode the block after inserting it, the constant attribute shows correctly. In addition, the constant attribute seems to be left justified with the TAG label from the block definition itself.
I made a DVD with a thumbnail menu. It has four pages with four thumbnails each. When navigating around it always defaults to the first page. Say I'm watching a chapter from the second page and I return to the menu, it sends me back to page one not page two. Is there a way to set it up to return you to your last location? I've made other DVDs that did this so I'm confused as to why this one isn't the same. Do I need to use one of the preset menus instead of a custom one?
View 2 Replies View RelatedOn my Vista machine, everytime I restart PS it reverts to the PS default workspace. I have a personal 'default' which will return it to my configuration, but it's annoying to have to switch it every time I restart.
how to make it retain the last workspace used.
It does not do this in XP.
I'm using the Multileader Align tool for my labels and it works great as long as my labels are left justified. I noticed this issue has been brought up before but didn't know a way to make it work for right justified text.
My problem is this: right justified text will not justify properly. It will not justify the same way that left justified text does. If you can follow this, leaders that have text that are left-justified will align according to their leader lines and everything looks neat and correct. The leaders that are right justified do not align properly because they align to the left side of the text. See the following screen shots and you'll understand...
Incorrectly justified leaders.
Correctly justified leaders
I have a VB.NET routine that exports a pdf using the TranslatorAddIn interface. I copied the example from the api help.
The pdf is created, but only the first sheet of the drawing is exported. I uncommented the following line in the example code, and still no change:
oOptions.Value("Sheet_Range") = kPrintAllSheets
I added a message box, to make sure I was reaching that line, and I found that I was not in fact reaching that line. Why is this? In some posts here related to dwf exporting also using the TranslatorAddIn, the first argument of HasSaveCopyAsOptions was oDataMedium instead of oDocument, so I tried that, too, but still no change.
Here is the code of the export to PDF routine from the api example:
Public Sub PublishPDF() ' Get the PDF translator Add-In. Dim PDFAddIn As TranslatorAddIn Set PDFAddIn = ThisApplication.ApplicationAddIns.ItemById("{0AC6FD96-2F4D-42CE-8BE0-8AEA580399E4}") 'Set a reference to the active document (the document to be published). Dim oDocument As Document
[Code] .......
When attempting to launch the Render in Cloud feature in Revit 2014, the following error message is displayed:
Render in Cloud
A Problem occurred.
The file could not be translated.-1
I have a drawing with a bunch of polylines with object data attached. The polylines represent roads, and among the object data is a road number. A typical road number might be "2000" and a road without a number assigned yet would be "0"
I am trying to run a query that pull out just the objects where the road number field is 0. If I try to query based on object data where the field = 0, I get returned all of the polylines whether the field is 0 or not. If I query with "2000", I get returned just the single road with that number as expected.
I've tried several different ways to make this work and I'm not sure what is wrong. I have tried with the number as integers, and doing field = 0, field <= 0, field < 1 and that didn't work, so then I converted it over to a character field and have tried field = 0 and field = "0" - nothing seems to work. Is there something with the field being zero that is causing issues and is there a way to make this work?
After sending files to Photoshop for further editing, use simple "save" command to return them to Lightroom. That used to work but now only JPEG files do round trip, not raw files (DNGs) although round tripping to Elements works fine. Photoshop is saving them to my catalogue instead.
Adobe agent spent more than an hour tinkering with my computer before giving up. Tried to blame use of DNG but this is an Adobe invention. Also said to use synchronise folder command as a work round but this restores deleted files as well. He promised to "escalate the problem" and I would be called back, but that was a week ago.
I would like to create an expression that returns the inner pipe diameter if the pipe is circular, and the inner height and width dimensions if the pipe section is square or elliptical. I tried this in the expression editor:
{Inner Pipe Diameter}|{Inner Pipe Height}&{Inner Pipe Width}
but it returned ? in the label .
Frequently when I import raw Nikon files to lightroom 4 I initially see a picture with tone and white balance I really like. during this time (2 to 10 seconds) the histogram indicates that it is calculating. When the histogram is finished calculating the picture changes with bad tone (exposure, contrast ...). You can go and manually change the tone settings but it can take sometime and I would rather be able to quickly return to the picture settings that was initially presented. Is there a short cut or easier way?
View 2 Replies View RelatedIn the Library and Develop modules, when I click on an image to magnify it to 1:1, the image expands to 1:1 and then immediately returns back to fit/fill (depending on what the setting was before). Clicking on 1:1 magnification in the Navigator works fine as well as using the CMD + shortcut; the image expands to 1:1 and stays at 1:1 magnification. I am running LR 4.1 on Mountain Lion on a MBP. I tested in other programs and had no problems.
View 7 Replies View RelatedI have just moved from v3.6 to v4.3. When using the library window, grid view, I use the filter bu selecting a specific date but images are being returned incorrectly. For example: When I select a date i.e. 25/05/2011, I have images being shown for that date but also others with a capture date of 06/02/2012. How can this issue be corrected? I have over 60,000 images to review.
View 17 Replies View Related