VideoStudio :: Menu Returns To First Page
Oct 25, 2010
I made a DVD with a thumbnail menu. It has four pages with four thumbnails each. When navigating around it always defaults to the first page. Say I'm watching a chapter from the second page and I return to the menu, it sends me back to page one not page two. Is there a way to set it up to return you to your last location? I've made other DVDs that did this so I'm confused as to why this one isn't the same. Do I need to use one of the preset menus instead of a custom one?
View 2 Replies
ADVERTISEMENT
Jun 5, 2013
been using Videostudiopro X5 for few years typically just for weddings and I do not use chapters. I need to edit and produce a dance recital this week and wondering if this is possible:
Producing 2 hours to a DL disc and will have 34 total dances. I will set a chapter marker for each dance. When it comes time for the menu, can I have 17 chapters on 2 pages for total of 34? I would like to have one menu page with 2 submenu pages, 1 submenu page for Act 1, 1-17 with song name and another for Act 2, 18-34 with song name.
I can do this with Sony Vegas, but prefer editing with VSPro.....
View 5 Replies
View Related
Jun 12, 2012
Regarding VSX5 Titles/Menus
In the finalized DVD the menu page appears only for a maximum of 30 seconds before continuing to play the movie. Is it possible to introduce a 'Pause until play is selected' option?
That is to say no automatic playing of the movie until the user decides.
View 4 Replies
View Related
May 27, 2013
Using VS X5 - Just making up a menu for my dvd im burning. Haven made a menu since using ..VS11+ I think it was.
All seems very very familar...similar etc and not asking it to do anything out of the ordinary which 11+ couldnt cope with ( just nowadays using all this AVCHD malaky etc )
Question -Main menu of my dvd - Why am I getting on my main menu page the begininings of my movie!!! I have my main menu setup ( bringing in a pre-made 30second clip on which I will put 'Press Play to watch movie' and/or 'chapter select'. ) When i preview my main menu page...I see the 30second clip i wanted but as it runs so too does my actual movie - at the same time.
I cant seem to find a button to ..basically..tell it not to play the movie as soon as you load the dvd but instead to wait until the 30 second main menu runs and automatically reruns etc until YOU decide to press the 'Play movie' button.
View 6 Replies
View Related
Jul 16, 2013
Is there a way to make a menu in Edge Animate so that when you are on a certain page, that page is highlighted on the menu? I want to make it a server side include <!--#include virtual="/menu/included.html" -->
View 1 Replies
View Related
Nov 12, 2013
I have recently been using Sheet Set Managers (SSM) more recently and have found them quite handy but I am also finding some peculiarities with it too. I have no issues setting up a SSM and getting it to plot all my sheets either to our plotter or to PDF at full size (24x36), however when it comes to setting up a half size (11x17) page setup and overriding to it, is where problems occur.
What I want is a page setup that I can select that will plot 11x17 from 24x36. So, I first created a page setup that does this in our template (.dwt) and then set the page setup overrides file to our template file (under sheet set properties). Next I right-cliked on my sheet set and went to "Publish" and then "Publishing Using Page Setup Override", but the list it populated for me did not reflect all of the page setups we have in our template??? It listed two page steups _24x36 and _30x42 (see attachment). These page setups can be found in our template under page setup manager along with several others which don't show in the overrides (see attachment).
Is there a reason the other page setups aren't coming up in the SSM overrides menu?
View 9 Replies
View Related
Aug 1, 2013
The "Apply" button is missing on my print options menu (XDPX9). I cannot apply any of the functions such as Imagingsetting - crop marks, output settings, layout settings, separations settings.
View 3 Replies
View Related
Sep 18, 2001
I doubt there is since they aren't listed in the control keys list in the help file, but it doesn't hurt to ask. I'm trying to simulate the CTRL+PG UP/DN feature of Excel to switch between tabs. I'm might just have to 'up' and 'down' arrow keys.
View 8 Replies
View Related
Aug 9, 2010
All I want to do is transfer some video files to DVD. I do not want any of Corel's menus to appear: I just want to put the DVD in a player and have the video start playing.
View 14 Replies
View Related
Apr 19, 2008
On my Vista machine, everytime I restart PS it reverts to the PS default workspace. I have a personal 'default' which will return it to my configuration, but it's annoying to have to switch it every time I restart.
how to make it retain the last workspace used.
It does not do this in XP.
View 3 Replies
View Related
Nov 25, 2013
I have used illustrator for years and all of a sudden when I justify text and add a soft return to knock a 'widow' or single work round the text no longer justfies! WHY? and can I turn this dumb feature off...?
View 3 Replies
View Related
Jun 16, 2011
I am using VS ProX3 & have just purchased PaintShop ProX3. PaintShop has a very nice page transition in the photobook section & I would love to have that, or something like it, available for VS. I've searched the forum for any info on a page turn transition that actually looks like a page turning.... any transition like this for VS?
I tried the slideshows in Paintshop but had difficulty with using various sized photos & the panning effects, etc. So I created my project again as a photobook & it was superb as far as that went....I'd like to time the animation of those pages (similar to MS PowerPoint transitions) & add music BUT I cannot seem to accomplish that there. Next I saved all pages as .jpg, imported those to VS & created a very nice movie with available transitions, music, titles, etc. This is acceptable, BUT I would love to have that particular "page turning" transition for VS.
View 4 Replies
View Related
Mar 7, 2011
What programs are available to create dvd menu templates to be used in VS X4? Right now I'm using the TBYB version but if I were to purchase I would like to be able to create and adding my own templates since there don't appear to be very many that come with the program, only a couple that I can see anyways.
I like the fact that I can burn video files and menus to disc within VS but the current selection of menus makes this feature mostly useless so I'm wondering how I could add more.
View 7 Replies
View Related
Apr 26, 2011
Is it possible to import menu templates from Videostudio 11 to the latest Pro X4. I am trying to to keep all my holiday movies with the same template and can find the files in VS 11 but not sure if I can import and which file I would import it into.
View 10 Replies
View Related
May 27, 2011
I have installed the evaluation version of VideoStudio Pro X4 in order to test it.When I whant to create a Blu-Ray menu, I have only one menu template. Is it normal ?
After modifying it, I can't find the way to save it, in "Favorite" for example.How to create a new menu from zero ?Or this menu creation tool is very limited, or I missed something.
View 7 Replies
View Related
Apr 23, 2012
I am on a 30 day trial of Videostudio pro X5, I am trying to create a simple menu via "nuts & bolts" like I could about 5 yrs ago on DVD-LAB. I do not care for the "wizard" approach....why, because you don't get exposed as to what is going on under the hood. Presently i don't care for transitions, motions, background music and alot of the other fluff work. This can all come later!
I know there are lots of tutorials for trans coding source video from one format to another. In a nutshell, I want to render to DVD, 3 Television episodes. One menu with 3 selections, play selected episode til end, return to menu and wait. I want to be able to pick my font type & Font size and and episode title, if I had more episodes a "More" selection link to a 2nd page menu from there a "previous" button to go back to 1st page.
View 3 Replies
View Related
Aug 29, 2011
Any way to add more Chapter pointers on the actual DVD menu itself. It seems like the provided DVD menu templates, and I've installed the extras in VSP X4, only have 4~5 chapter pointers per DVD menu page. There's plenty of screen space to add more chapter pointers but how to do it. I tried clicking on one and doing a copy, but can't seem to go any further than that. I must be missing something somewhere. I want to have 6~12 links to chapters on each DVD menu page. I don't need a preview image for each chapter pointer, just a simple text pointer is fine.
Is there a way to do add more to the DVD menus?
View 1 Replies
View Related
Sep 20, 2013
I am using Video Suite X5 and have made a video with chapters. After playing one of several chapters I want the DVD to return to the menu but it continues to play the remainder of the disc. I found a setting for Clip Playback that has settings of "Continue to Play the Next Clip" and "Back to Menu". I set this to 'Back to Menu" re-burn, but after playing a chapter, it still continues to play the disc and does not return to the menu.
View 1 Replies
View Related
Mar 2, 2011
This actually applies to all the versions I have used since VS10. I have never been able to create a top menu for the dvd which looks like the ones on commerical dvd's, namely, to have buttons not only to "play movie" but also to "view chapters" etc. The user's manuals appear to be mum on this point.
View 14 Replies
View Related
Apr 23, 2011
Video Studio pro X2 (12.0.98.0)
After editing my clips and am ready to burn,I select SHARE, CREATE DISK, DVD, create a menu and get stuck in a closed loop.Instead of NEXT after I preview the final product, the window has BACK, so I end up in the window where you select if you want a menu. Click NEXT and am back at the menu window with BACK in the box.
This same VS pro X2 was on my old computer (XP) and made many burns with no problems.
View 6 Replies
View Related
Nov 29, 2011
I just upgraded from X3 to X4 (probably means X5 is on the way...). When I upgraded to X3, I had some "My Favorites" DVD menu templates in VS10+ which I managed to transfer to Movie Factory SE by moving some files (*.ufo?) from some VS10 directory to somewhere in Movie Factory. It's too long ago -- can't remember the details.
View 3 Replies
View Related
Apr 13, 2011
Is it possible to delete a Menu. I burned a DVD but the Menu is wrong. When I recall the *.VSP file it has the Menu that I don't want. How can I delete it? If this is not possible is my edited video saved somewhere without the Menu?
View 2 Replies
View Related
Jul 17, 2013
I need to do some text amends and need to show hard returns etc.. Where is the show invisibles in PS6?
View 4 Replies
View Related
Nov 21, 2012
I have a VB.NET routine that exports a pdf using the TranslatorAddIn interface. I copied the example from the api help.
The pdf is created, but only the first sheet of the drawing is exported. I uncommented the following line in the example code, and still no change:
oOptions.Value("Sheet_Range") = kPrintAllSheets
I added a message box, to make sure I was reaching that line, and I found that I was not in fact reaching that line. Why is this? In some posts here related to dwf exporting also using the TranslatorAddIn, the first argument of HasSaveCopyAsOptions was oDataMedium instead of oDocument, so I tried that, too, but still no change.
Here is the code of the export to PDF routine from the api example:
Public Sub PublishPDF() ' Get the PDF translator Add-In. Dim PDFAddIn As TranslatorAddIn Set PDFAddIn = ThisApplication.ApplicationAddIns.ItemById("{0AC6FD96-2F4D-42CE-8BE0-8AEA580399E4}") 'Set a reference to the active document (the document to be published). Dim oDocument As Document
[Code] .......
View 1 Replies
View Related
Nov 4, 2013
When attempting to launch the Render in Cloud feature in Revit 2014, the following error message is displayed:
Render in Cloud
A Problem occurred.
The file could not be translated.-1
View 5 Replies
View Related
Mar 5, 2012
I have a drawing with a bunch of polylines with object data attached. The polylines represent roads, and among the object data is a road number. A typical road number might be "2000" and a road without a number assigned yet would be "0"
I am trying to run a query that pull out just the objects where the road number field is 0. If I try to query based on object data where the field = 0, I get returned all of the polylines whether the field is 0 or not. If I query with "2000", I get returned just the single road with that number as expected.
I've tried several different ways to make this work and I'm not sure what is wrong. I have tried with the number as integers, and doing field = 0, field <= 0, field < 1 and that didn't work, so then I converted it over to a character field and have tried field = 0 and field = "0" - nothing seems to work. Is there something with the field being zero that is causing issues and is there a way to make this work?
View 2 Replies
View Related
Dec 21, 2013
After sending files to Photoshop for further editing, use simple "save" command to return them to Lightroom. That used to work but now only JPEG files do round trip, not raw files (DNGs) although round tripping to Elements works fine. Photoshop is saving them to my catalogue instead.
Adobe agent spent more than an hour tinkering with my computer before giving up. Tried to blame use of DNG but this is an Adobe invention. Also said to use synchronise folder command as a work round but this restores deleted files as well. He promised to "escalate the problem" and I would be called back, but that was a week ago.
View 1 Replies
View Related
Aug 9, 2012
I don't know if it was like that before, but since X4 I have a minor problem when I start to render a video: The longer the project is, starting from 5 mins, the longer it takes for the rendering menu to appear. I have uploaded a video on YouTube to make clear what I mean.
[URL]
View 1 Replies
View Related
Mar 6, 2011
There seems to be an issue with edits to DVD menus not being saved properly. This is in addition to the chapter names problem I've read about.
Whatever changes I make to the menu in the Create Disc dialog, such as adding a graphic and changing text to the Main menu, are lost upon closing the Create Disc dialog and returning back to the VSPX4 Share workspace.
In short, this is my workaround:
1. Save the current project (File > Save).
2. Click Share > Create Disc.
3. After the Create Disc dialog pops up, remove the movie that's labeled "Untitled."
4. Add the .VSP project just saved.
5. Add chapters, edit the menu text, and so forth.
6. Click the "Close" button.
The DVD chapter markers will update on the VS timeline. Previous chapter markers on the timeline are deleted. I now want to see if the edits to the menu have been saved, so:
7. Click Share > Create Disc again.
8. Remove the movie labeled "Untitled." That always comes back.
Edits I made the last time are still there.
9. Continue with adding chapter markers, editing the menu...
With my strategy, all chapter markers have to be added in the Create Disc dialog. Chapter markers on the timeline in the VS Edit workspace get passed to the Create Disc dialog, but they are associated with the movie labeled "Untitled" which I delete. There is no point in adding chapter markers to the timeline in the VS Edit workspace.
View 7 Replies
View Related
Mar 15, 2012
Using VS X4, I haven't been able to find how to create my own DVD menu, starting with a blank screen.
I have been able to use the gallery edit function and remove text fields, but can't remove the image that is supplied with a given gallery menu. Is there just a way to start with a blank screen and then just add an image and some text?
View 5 Replies
View Related
Nov 28, 2013
How I can add intro movie before menu. I'm using VS Pro X6.
View 2 Replies
View Related
