AutoCAD Inventor :: Ribbon Menu Justified To Right
Oct 22, 2011
I have switched computers from my laptop to my workstation. My laptop has an Nvidia card FX2500M, and my workstation has an ATI Fire V5600.
I work with the ribbon minimised to tabs. On my laptop, when I click a tab the ribbon opens directly below the tab (i.e. justified to the left of the screen); but on my workstation, the ribbon opens below the tab but justified to the right of the screen. This means I have to move the cursor back and forth across the screen.
Is there a Reg setting to change the justified back to the left of the screen?
When the ribbon minimise is on other settings (e.g. minimise to panel tiles) the ribbon is justified to the left side of the screen.
Inventor Pro 2012 with SP1.
View 9 Replies
ADVERTISEMENT
Oct 2, 2013
A sample code for creating a dropdown menu for a AutoCAD ribbon toolbar? I can attach buttons and so on to the toolbar, but I cannot make a drop down menu.
View 1 Replies
View Related
Jul 16, 2010
I was workingona project with autocad 2011, but i lsot the original menus, Ihave been obliged to use the costomed menu. I knew how to use Autocad 2000 and ADT 2002,
View 9 Replies
View Related
Jun 1, 2012
new Array command in 2012...
On a clean install without importing the users settings, the ribbon changes to to the array menu when the command is selected but if we import settings from a previous release it doesnt work.
All the other contextual menus like text editor and hatch menus work fine, seems to be just Array (I guess because its the only new one?)
Is there a way to get it working? I checked CUI and it appears under both Tabs and contextual Tab States, the settings seem the same as the others that are working?
View 9 Replies
View Related
Apr 29, 2012
All the 'whats new' info talk about the Detail View Tools as a Tab etc in the ribbon
but it doesnt appear on the ribbon...
How do you access it?
View 3 Replies
View Related
Aug 21, 2011
My ribbon menue is not longer visible. How do I get it back.
View 6 Replies
View Related
Apr 15, 2013
Was working on a drawing, then poof, they're gone. How do I turn them back on?
View 9 Replies
View Related
Sep 17, 2013
I've never cared for the Ribbon. IMO it takes up a lot of valuable screen real estate and spreads out commands I find to useful to be grouped together across multiple menus. I did like how the Menu Bar was laid out in LDD because all the commands for anything I could do with alignments, for example, were all in one place.
Here's how I set up C3D to have an UI more like LDD:
1. Show the Menu Bar: click on the dropdown menu button on far right of the Quick Access Toolbar (at the upper left of the C3D screen) and select Show Menu Bar. Old familiars like File, Edit, Points, Alignments, etc should be visible.
2. Get rid of the Ribbon: type RIBBONCLOSE into the command line and ta-da!
View 1 Replies
View Related
Jul 13, 2012
I seem to have lost my Add Labels Menu Button on my Annotate Ribbon. I have tried reloading my workspace but it is still gone. How to add it back on?
View 2 Replies
View Related
Nov 13, 2012
i having a fully working ribbon in ACAD2013. it is a registered dll that is originally coded in vb.net.
unfortunatley the functionality is only visible at the drafting & annotation workspace but is desperatly needed in classic workspace mode.
for hours i am trying to find a way to make my functionality working in classic workspace too.
is it possible to extend the classic workspace in acad2013 with my functions? if so, how, or where can i get more detailed information to solve my task.
View 6 Replies
View Related
Feb 20, 2013
How do you make an image (JPEG) visible again after you turned it off with the contextural Image Ribbon Menu?
Once the image is gone I cannot find how to get the contedxtural Image Menu back.
Inventor Suite 2013 Ultimate
View 2 Replies
View Related
Aug 31, 2012
Why does no node appear on Left justified text, yet it appears on right and center justified text?
View 8 Replies
View Related
Nov 28, 2012
I am trying to customize Autocad 2012 ribbon tab. I can't seem to find how to mimic the small arrow that appears in several of the standard menus. For example, in the 3D Solids - Home Tab, the second panel from the left is "3D Solids Home - Mesh" It has a small arrow in the corner that opens up a preferences dialogue box.
How can I add that arrow to a custom panel with that little arrow so that I can add my command to it?
View 4 Replies
View Related
Mar 2, 2012
I have a couple of different files that I'm working on that I want a particular text box left-justified. I will get it left-justified and save the file, but the next time the file is opened the text is centered.
View 2 Replies
View Related
Apr 24, 2009
I am trying to determine whether or not the following is a bug:
1. Begin creating a new block using the block editor.
2. Add an object (circle) for reference.
3. Add an attribute with the following properties: Constant, Visible, Value (i.e. "34"), Justify: "Middle-Center." Make the tag
4. Save the block, exit block editor.
5. Insert the block into model space.
At least on my system, the constant attribute always shows up left justified. If I explode the block after inserting it, the constant attribute shows correctly. In addition, the constant attribute seems to be left justified with the TAG label from the block definition itself.
View 3 Replies
View Related
Jan 24, 2013
Where are the bits of the Ribbon API to add a slide out to a ribbon panel?
Autodesk.Windows.RibbonControl ribbonControl = Autodesk.Windows.ComponentManager.Ribbon; RibbonTab Tab = new RibbonTab(); ribbonControl.Tabs.Add(Tab); // create Ribbon panels Autodesk.Windows.RibbonPanelSource panel1Panel = new RibbonPanelSource(); panel1Panel.Title = "Panel1"; RibbonPanel Panel1 = new RibbonPanel(); Panel1.Source = panel1Panel; Tab.Panels.Add(Panel1);
I saw some source that hinted you could use panel1Panel.AddSlideout() but in the search I do not see any Ribbon API that allows for any slideout functionality?Do you *have* to use the CUI API for this?
View 5 Replies
View Related
Apr 27, 2011
I'm using the Multileader Align tool for my labels and it works great as long as my labels are left justified. I noticed this issue has been brought up before but didn't know a way to make it work for right justified text.
My problem is this: right justified text will not justify properly. It will not justify the same way that left justified text does. If you can follow this, leaders that have text that are left-justified will align according to their leader lines and everything looks neat and correct. The leaders that are right justified do not align properly because they align to the left side of the text. See the following screen shots and you'll understand...
Incorrectly justified leaders.
Correctly justified leaders
View 9 Replies
View Related
Nov 20, 2003
the last 4 justifcation tools in the paragraph palette i can't select
View 1 Replies
View Related
Sep 2, 2011
In the Default.ivb I have created a function that creates a new panel and adds some buttons in the panel.
I see the panel and the buttons, but nothing happens when I click on them.
The documentation says that in order to listen to the events of my buttons I should declare a "Private WithEvents ButDef As ButtonDefinition", but it when I try I get an error message "Only valid in object module"
Another question, still related to the events, I would expect to find a _StartUp event where I should run my function, but I can't find that event.
View 8 Replies
View Related
Mar 31, 2010
How to activate specific Tab on the Ribbon by VB.Net code? Exist any way how to "bring to front" my own Ribbon Tab?
View 4 Replies
View Related
Dec 10, 2012
is it possible to add a textbox to the ribbons in Inventor 2013?
View 5 Replies
View Related
Jun 25, 2012
Dim icon_Main As IPictureDisp icon_Main = PictureDispConverter.ToIPictureDisp(My.Resources.Garant)Dim controlDefs As ControlDefinitions = m_ inventorApplication.CommandManager.ControlDefinitionsbt_main = controlDefs.AddButtonDefinition("Projektmanager", "int_projekt", Command TypesEnum.kFilePropertyEditCmdType, app_guid, "beschreibung blabla", "tooltip", icon_Main, icon_Main, ButtonDisplayEnum.kAlwaysDisplayText).
[code]...
When i start this code, a nice tab shows up when i open an assembly, good!But Now i want to show the same tab with the same button in Part Ribbon.
View 1 Replies
View Related
Sep 26, 2013
how I can get a form onto the ribbon or create a custom Icon to run it.
I have read up on afew forums that VB needs to be used in order to achive this but I want to double check.
I dont have VB but if it is the only way to get this to work I will download it.
View 1 Replies
View Related
Sep 23, 2012
I have just installed Inventor 2013. How can I fix the UI Ribbon cutting off button text? I have attached a photo demonstrating the problem. I cropped the screen shot to only show the ribbon to cut down on excessive image size.
View 9 Replies
View Related
Sep 12, 2011
I am new to the ribbon and am having trouble putting more than one button on the same ribbon. I have two addins that both have buttons that need to go on the drawing>Place View tab but I can only see one button. If I put them on different tabs they both appear, what is my problem?
View 1 Replies
View Related
Mar 28, 2012
I am having PDS Ultimate 2012 and working on inventor. when i open a file or open a new template ribbon freezes means menu bar doesn't work properly,if i change the ribbon appearance it doesn't update also i cannot switch between the menu bar tabs and if i turn on the visibility of the datum planes it doesn't show on the screen.But when i refresh the windows everything works sometimes. i have installed SP1 and even repaired inventor.
System Config:
OS Name Microsoft Windows 7 Professional
System Manufacturer LENOVO
System Model 20079
System Type x64-based PC
Processor Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2300 Mhz, 2 Core(s), 4 Logical Processor(s)
Name AMD Radeon HD 6370M
Adapter Type ATI display adapter (0x68E4), ATI Technologies Inc. compatible
Adapter Description AMD Radeon HD 6370M
Adapter RAM 1.00 GB
View 2 Replies
View Related
Aug 2, 2012
Can I disable ribbon in 2013?
View 1 Replies
View Related
May 23, 2012
How to create a ribbon with a button. I am creating an add-in for Inventor. I am trying to put this code in the Activate Sub but it's not adding the ribbon once I open a drawing. Just trying to use this example to get me started.
public void AddParallelEnvironment(){ Application oApp = ThisApplication; // Get the Environments collection Environments oEnvironments = oApp.UserInterfaceManager.Environments; // Create a new environment Inventor.Environment oNewEnv = oEnvironments.Add("Some Analysis", "SomeAnalysis", null, null, null); // Get the ribbon associated with the assembly environment
[Code] ..........
View 1 Replies
View Related
Nov 21, 2012
If you make alterations to a model, and then switch to vault menu, your model is red with an asterix (requires saving). If you click check in on this, you get the message that it needs saving, click ok. It appears that it has worked but all the buttons on the toolbar are frozen. if you click the big I all the ribbon greys out and you need to restart Inventor. The only button that still works is Suite Workflows.
I have SP1.1 installed as well as the vault hot fix.
View 5 Replies
View Related
Dec 2, 2011
All of a sudden I see that within my Inventor the vault Collaboration ribbon has disappeared. How do I bring this back?
C1
Inventor Professional 2013
Vault Collaboration 2013
View 6 Replies
View Related
Mar 21, 2013
When I start Inventor2011 with classic UI only first start set in my addin FirstTime on true, every oder run of inventor FirstTime is false - everythink is OK.
But when I change UI on Ribbon FirstTIme is always True, and every time UI is reloaded -there is bed.
View 2 Replies
View Related