At the moment, I'm labeling features on my drawing with stations/offsets, but this question really applies to all label settings - is there any way to restrict the label text to be in all caps? I know I can just type in the station/offset labels manually but I'd like to be able to use the automatic-updating functionality of AutoCAD 3D.
View 2 RepliesI have slope % angles labeled on a plan, but they are too large. They are 1/8" tall, and I need them to be 3/32" tall. I have checked the style (ROMANS) to be sure the text height is set to 0", and it is. I've also ensured that these labels are on this label style.
Check the screenshot. I added 2 screenshots with a huge difference in font size just to be sure my point gets across. And, I have hit APPLY and closed the window just to be sure. You will see up top, I have it set to 3/32". Actually the text isn't showing right, it is still stuck on 1/8". But, regardless, you can see in the lower screenshot where I have changed it to 3", but the text has not changed.
As a side note, the text on the slope labels should match the height of the contour labels you can see in the screenshots.
C3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
I have over 1500 pieces of text in lowercase letter and I want to make them all uppercase.
Is there a easy and quick way to do this?
How to you type text with caps and small caps?? Is it necessary to type in all caps then increase the size of the first letter in each word manually?
View 9 Replies View RelatedIs there a way to "Edit Label Text" in a Parcel area label? Similar to the way you can edit it in other styles.
View 9 Replies View RelatedIs it possible to modify a label set to a new starting station, e.g., instead of the alignment starting at 0, change it to start at 100?
View 9 Replies View RelatedI like using the edit label text in the lable styles to add additional text and information.
I can turn on / off the backroung mask for all the style but not each.
Is there a way to turn on / off the backround mask of each layout text.
I'm using civil 3d 2012 and testing 2013.
In the dragged state, I don't want to use 'As Composed' because the label is composed to be parallel to the line, but I want it to flip to horizontal to the view when dragged. This is working fine with 'Stacked Text'
What is not working is the text justification. I want it to remain centre justified, as it is composed. But there doesn't seem to be any option for this when you use the 'Stacked Text' option for the dragged state. I thought that setting the 'Leader Justification' to false might do it, but that just makes it always left justified. Am I missing something here? Is there no 'Top right/bottom right/middle center/top left.....' option for Stacked Text? And if not, why not?
I'm in 2011.
I keep getting the words "Label Text" being placed at 0,0 every time I insert a profile view into my drawing. Is there a simple way to change something in the settings to either not display this at all or sontrol how/where it is displayed? It is annoying when you do a zoom extents being you now get 2 small dots on screen, 1 being the actualy drawing at the correct utm cooridnates and the other being this piece of text down at 0,0.
View 9 Replies View RelatedI am trying to scale down my label text insdie of my viewport. Its about twice the size that i would like.I tried to use the scale command but nothing happens.
View 3 Replies View Relatedphotoshop_cs5 and photoshop cs6..My fonts are all coming up in caps. My caps lock is not on. The lower case letters are also coming up in caps. Cannot get it to work.
View 2 Replies View RelatedI can create single alignment labels (fixed point, offset etc) that show a chainage and, by using reference text, a profile level for an associated profile.
However, using the main labels that are used for displaying chainages along an alignment (alignment chainage label group) I can also add in a reference text label for profiles here, alongside the chainage one, but there is no option to set which profile it references so it just displays '???'.
Getting the alignment labels to also display associated profile levels at every chainage point would be incredibly useful.
I need to get a station and offset for a bunch of points and have it show up in the point label. i can't find reference text in the label style so i was wondering if there was a good workaround.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
How to reach Reference Text Object in Vba?
We can add Reference Text in Label Components. it can be referenced to Alignment, COGOPoint, Parcel, etc. For example, after that it is needed to select a COGO Point, and Label is changed from "???" to a property of selected Reference Object. I want to add Reference Text by VBA.
I'm trying to create an alignment label to display profile elevations at regular stations. Two questions:
1. I use an expression to set the text height. When I add a regular text component in the label this works fine, but when I add reference text I can't seem to use the expression as text height.
2. I want to use an expression to 'Truncate' the elevation, so that 178.35m displays as 78.35. I can't find a way to create an expression to do this (within the Alignment station labels).
For composing a profile label, I can't find the option for Geometry Point Text, which would use our abbreviations under the drawing settings. It is available for alignments but not profiles. Currently have it text compenent being labeled with PVC and PVT, but I had typed that in.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
How to put a (Return) or Break to another text line in a label? Usually it is one big long label on one line.
View 4 Replies View RelatedI would like to perform a math function within a point label and have it displayed along with my point. I have a bottom of curb elevation point and would like to show the top of curb elevation as 0.5' feet greater than the flow line without inserting 2 separate points. For drafting purposes only. (ie. TC 10.50/FL 10.00 ; the TC value would be automatically derived from the FL or point elevation value.)Can math functions be performed within a label's Text Contents?
View 5 Replies View RelatedHow I would replace the Elevation label on a point with Alphanumeric text on certain points in a point group (or if it can be done at all)
Some background info:
I work with site diagrams that have monitoring wells and each one has a groundwater elevation value that gets updated every year according to field data. Our current setup is that the monitor well name and elevation values are displayed using point labels and looks like:
x 12-1 (Monitoring well name)
788.432 (Groundwater elevation value)
However, sometimes the monitoring well is dry and we need to display 'DRY' instead of a numeric elevation value. Autocad won't let me put 'DRY' as an elevation because it's not a number. Is there a way to override this, or somehow make the label display 'DRY' if elevation of 0 is entered?
Another use to overriding point label elevation is that sometimes the groundwater elevation that we get from the monitoring well is so far off from the general contour pattern that we will put the elevation value of that well in brackets such as (788.432) and indicate that this means the elevation was not included in the groundwater contour flow map.
Is there a way to do this override, or is there another method I should be using to label my monitoring well elevations? I know I could just MTEXT everything, but that's double the time to update the point elevations for the contours and then updating the mtext to display the numerical elevation values.
I'm trying to use diagnol fractions in my label text for 1/2 and 1/4 deltas. It displays and seems to work fine in Autocad, but when I plot, the numbers have trouble displaying themselves.
I'm using a light color from our .ctb, so I thought that was the problem, but that doesn't seem to be the case (I tried two heavier lineweights and it only got worse). Increasing the percentage size of the fraction also has no effect.
I'm having trouble getting my label style to flip when in dragged state. If I drag it off to the right, the text and line show up just fine, but if I drag to the left, the TC and FS head that way, but the line in between stays put.
View 8 Replies View RelatedWhen I use a layout size such as A3 in paper space, the section view label text size is the same as it is in model space (when both annotative scales are the same). However, when I choose 11x17 as a layout size, the section view label text size is exetremly small.
View 2 Replies View RelatedI've been tinkering with text sizes in model space and would like to have my point numbers consistent regardless of zoom factor. I can do this in paper space (viewports) as the annotative scale controls the appearance, but for doing analysis of points at various zooms in model space, it would be nice to be able to Regen and have them all come to a certain text size.
I've made some expressions that are modifications of those I use in paper space, but I can't seem to find a function/variable that I can reference for this purpose.
Is there a way to set up a custom Point Label Style that will change the text color if the information entered meets particular criteria? I will be entering sample measurements taken on two (2) different dates, but if the sample data is greater than 1.0, I want it to show up a different color.
View 4 Replies View RelatedI'm attempting to create a profile view and then modify the label by overriding the text components. Unfortunately the profile view bands don't populate the labels until after my command is complete making it not possible to modify them in one command. Is there a way to update the band to have it show the labels?
Civil 3D 2013
The label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies View RelatedI like the AutoCAPS setting in Mtext, however I occasionally use lower-case text when I am typing, such '2"x4" STUDS' . . . now, I do have a problem with AutoCAPS though:
Example - I copy '2"x4" STUDS" and paste it into another Mtext and the lower-case 'x' is automatically pasted as an uppercase character.
Are there any settings for AutoCAPS, or maybe for the copy/paste command that I can change to allow lower-case characters to be pasted into text when the AutoCAPS is on? It is a bit of a hassle to turn off AutoCAPS and turn it back on.
I'm trying to label my Profile label stations as raw stations, 20~20 meters, and I'm not being able to adapt the format to STATION 0, STATION 2, without any plus zeros or +, or -, or commas, or anything, as following in the image.
Is there a easy way to do it?
This has happened in a couple of drawings now. The STYLE dialog keeps saying "The current style has been modified. Do you want to save your changes?" even when I have changed nothing at all. Anyway, I select the style I want, hit Apply and Set Current, and put in some text. Now I list that text, and sure enough, instead of being on L80 it says L-BASE|Standard or some such thing. If I use DTEXT, Style and set it there, my text will be the correct style - but if I go back to the Style dialog box, L-BASE|Standard will show as current again. Acad C3D 2011.
View 3 Replies View RelatedI am using Civil 3D 2012 and seem to have a reoccurring problem with the text styles changing. At the start of the day, I will open my drawing and find that my text style has changed and I am not sure what is causing this. I check my text styles and none of my settings has change nor has the text style. Nothing seems to fix the problem other than running a repair of the system.
View 4 Replies View Related