AutoCad 2D :: Move Attribute Up / Down On List Of Title Block
Apr 25, 2013
Is there anyway to move attributes up or down on the list of a title block? I like everything for Rev 1 to be together (Drawn By, Checked By, Approved By, Date, Description, and Rev Number)...However, i was in a hurry and skipped Approved By. Once i added it, after the entire title block was done, it moved it to the very bottom on the list. Is there a way to "Move Up" so that it's with the other Rev 1 group?
View 1 Replies
ADVERTISEMENT
Sep 6, 2012
Autocad 2011, Electrical package,
I have an existing title block a few text attributes, to which I wish to add a watermark. I have added it in the block editor as a normal attribute, with the same details as the other attributes that work, only a different tag name. It has a default value, "DRAFT" and is tagged "WMARK". It works fine in the Block Editor, and If I test the block I can edit it to display whatever I want, but if I save the block and open it from Autocad proper, the attribute is not in existence, either as a default value, or editable from block properties, attribute editor or title block editor, whereas all of the other attributes are there. I have used BattMan to verify the settings of the attribute, and the only difference is that the others all have "L" in the "Modes" column, but I think that means that their position is "locked" whereas my new attribute is justified "aligned" therefore cannot be "locked" (This is some assumption on my part, as the documentation on the "Modes" column is almost non-existent). I cannot afford to waste much more time on this issue, as the boss is breathing down my neck, but editing watermarks on every drawing after every revision is frustrating, when it could be an attribute that is editable from the title block editor.
View 9 Replies
View Related
Mar 2, 2013
How to make add attributes in this tittle block and give attribute green color.
View 9 Replies
View Related
Feb 28, 2012
I want to make my title block as attribute . how can i make it so i ll use it for all drawings. My block is below
BR-6001-1 - A1.dwg
View 6 Replies
View Related
Nov 13, 2013
starting a new job at work so setting up the job folder etc. grabbed the title block and the text attribute insert from the library.....
so here is when the issue started.....so title block and text attribute are both saved in model space, both have all the same settings, this also applies to the template we have here all match.
so i xref in my title page at 1:1 which comes in normal, then i insert my attribute block in at 1:1 but it comes in at some super size thing, normal 3.5 text size is now 1000......
have fiddled with everything gone back to the library set etc but got no idea.
the interesting bit is if i open the title block and insert the attribute block in, it comes in perfect......
so in saying that i am assuming it is the work template..... but none of this has changed for over a month and have created drawings since then........maybe a random setting somewhere has changed but again haven't done anything different to normal no new radical changes....
i have attached a copy of the title block and the text attribute.
View 9 Replies
View Related
Oct 10, 2011
I having one DWG with in 50 layouts. In that, if i going to edit or change the date, description, and etc, means it will take too much time to update in all layouts (50nos.)
If possible to edit all layout with in one time?. One more thing, one type of title block used to all layouts and title block was with enhanced attribute text.
View 9 Replies
View Related
Jun 24, 2013
I can't find my notes on how I fixed it. When we insert our title block, it automatically inserts the drawing number. For one user, it doesn't work. The title block inserts, but it won't put in the drawing number. I seem to remember I need to change a setting or something to get it to work, but I can't remember what it is.
View 3 Replies
View Related
May 18, 2012
I have 200 files listed in Excel. The file name in excel is an attribute being document number in title block.
How I can import this directly into eac .dwg file?
View 1 Replies
View Related
Mar 13, 2012
Is it possible to create a 'drawing scale' defined attribute inside my title block when brought into paper space? I tried setting it up using 'plotscale' fieldname with various formats and it keeps coming in as 1" = 1' or 1:1 rather than 1" = 20' because that's what my plot scale is inside paper space but my drawing scale is 20 scale. If I bring the title block in model space, it adjusts, but I don't plot from model space. Surely there's a way to make this automated inside paper space.
Also, I just setup a 'Date' attribute inside my title block today. What's the difference between Date, Saved Date and Plot Date? Will 'Date' update if its in a drawing and opened up a month from now and saved or do i need to take 'Date' out and replace with 'Saved Date' or Plot Date'?.
View 7 Replies
View Related
Sep 2, 2008
I have an Inventor 2009 idw template that I have setup for export to AutoCAD. Once it's in AutoCAD format I have to run a script file from my customer that checked attributed fields in certain blocks in the AutoCAD file. In IV2008 the title block names were changed on export to adding "title blocks" to the beginning. Which I delt with. But now in IV2009 all the TAG names in each block are also renamed on export to adding "_001" to the end of each TAG name. Is there any way to keep the same naming on export to AutoCAD for blocks and sketch symbols so I don't have a write a bunch of script files for the AutoCAD file?
View 5 Replies
View Related
Sep 10, 2013
I was given a customers title block but there are no defined attributes. I'm using AutoCad Electrical 2010. I have to double click on the title block and the edit block definition box pops up. I select the block to edit and click ok. I would like to use the enhanced attribute editor on these title blocks. Is there a way to define the attributes on this kind of title block using the enhanced attribute editor?
View 9 Replies
View Related
Sep 22, 2011
I have created a generic title block for all my drawings and I have some attributes for the block. Is it possible to have a drop down list for an attribute so I do not have to type in the value/text each time? If so, how?
I want to be able click on 'customer 1' or customer 2' ect. and not have to type it in the attribute.
I'm using Autocad 2011.
View 5 Replies
View Related
Sep 10, 2012
How can I add an attribute to a block without the other attributes to move from their position. With the ATTSYNC belongs unfortunately not because the old attributes moved back to the original places that I will not.
View 9 Replies
View Related
Jul 18, 2011
I'm using Autocrat 2004.
I have a attributed titleblock. Sometime in the future I will need to change the date attribute to another value, i.e.. 7-11 to 9-11.
I can't place a text string in the title block because this title block is used for multiple drawings and the date will be different for different sets. I can't have numerous title blocks because of the client's requirements.
Question:
Is there a way to write a script to open a drawing, look for the specific attribute, change the date value, save and close the drawing - across multiple sheets? Would a lisp routine called by the script be able to do this? Or a script file called by the original script file? CAn you even use a script file in this manner?
View 7 Replies
View Related
Oct 22, 2009
I am working on a large project where a 3rd Party firm has turned over 100s of drawings that we need to get into our system. The problem is that they did not name their physical files properly. We have a particular numbering system for our drawings, the engineering firm did fill in our attributed title block properly and used our numbering system correctly within the drawing. However, their physical file name follows their format. We need to have the physical file name match the information in the title block to get into our system.
Is there a way to "Batch Rename" these files by reaching into the title block and then renaming the physical file to match the attribute?
I have to be honest, I may use AutoCAD 50 to 60 hours per week, but I am no programmer! I am just the go-to person here for AutoCAD whom is stuck trying to come up with a efficient solution for the project team whose engineering firm could not follow our procedures! I was hoping some sort of batch routine could take care of this problem for us instead of us having to individually rename each physical file one by one.
View 9 Replies
View Related
May 9, 2013
How to export title block attribute text .. in a order from different layout .? file ext .xls or .txt i got a tool named Autocad Automation tool but it not work very well autocad have data extraction - its also came all text .. and not in order .. can we develop the any lisp for that ?.
View 4 Replies
View Related
Aug 16, 2011
when I insert a block with attributes I get the prompts on the commandline to fill in the attributes. Can I stop this from happeneing, and just insert the block?
Alternatively, can I get the Attribute Editor dialogue box to come up instead?
Sidenote: How hard is it for people to learn that blocks need to be INSERTED not copied - if you copy the blasted thing the attributes are messed up, why is that so HARD?
View 5 Replies
View Related
Nov 16, 2008
I have a problem with using .Net to insert a dynamic block and set the size property. The attribute text does not move correctly on insert, but will if manually stretched after the fact. From my research the recommendation is to make sure the attribute definition is marked as "Locked".
I have an attribute definition inside a circle (classic door/window number), both the circle and attribute are included in the Action Selection Set, however only the circle moves correctly. It all works correctly if manually inserted/stretched.
View 9 Replies
View Related
Feb 3, 2012
I'm looking for a lisp routine that will globally list all the values from a specific attribute tag within a specific block. The attribute tag is "COMMENT" and the block name is "FSD".
View 9 Replies
View Related
Aug 31, 2012
select all blocks on certain layers in a drawing, check attribute CIRCUIT in each block if it starts with MS then attribute CONTROL = switched. I hope thats clear enough the way
(defun c:control()
(graphscr)
(Setq sc (ssget "X" '((0 . "INSERT")
[Code].....
View 1 Replies
View Related
Jul 3, 2012
I wanna transfer my attribute block values to another attribute text blocks , is there any lisp for that?
Is there a possibility for sum tag values of choice attribute blocks to inside of another attribute text block ?
View 2 Replies
View Related
Apr 26, 2013
The title blocks that we use have prompted entries in them and I would like to find a way using iLogic to copy the entries from one title block to another within the same drawing; i.e.. if the user decides to change from an A2 to A1 drawing.
I already have an iLogic rule which allows the user to change the active border, title block and sheet size based on a form selection but would like it to capture the prompted entries already entered and re-use them after the change.
View 9 Replies
View Related
Jun 11, 2012
I have a title block inside my drawing and i want to link my title on the title of the file itself, so that if the title of the file was change, it will be change also inside the drawing.
View 4 Replies
View Related
Oct 5, 2012
What I really want to do is on our fire alarm blocks we have 3 different attributes one for the address, the candela and one for misc info. I want to make an attribute that takes the number from the candela (15,30,75or 110) and change a different attribute to a value depending on which candela we use (such as 15=.078, 30=.113, 75=.195 or 110=.259). But I don't want the .078,.113,.195,.259 to print out on paper, I want to export block information excel file so I can add up all values.
View 2 Replies
View Related
Aug 13, 2012
Is it possible, via whatever methods (lisp?) to be able to have a premade block with an attribute and insert it into a drawing then assign a value to it by selecting another existing block in the drawing and using one of its own attribute’s values?
For example, say I have a block representing a telephone and it had an attribute called "PhoneNo" and I inserted it into a drawing showing an office floor plan that had blocks in each office space that are telephone junction boxes with attributes "PhoneExtension". I would like to be able to autocomplete the entering of the “PhoneNo” data by selecting one of the telephone junction boxes in the drawing and using its attribute’s value.
View 5 Replies
View Related
Feb 12, 2012
I need to match few attribute values from one block to different block. I download a lisp file called; ca.lsp which can match the single attribute value. I modified it for more than one attribute value matching. It is ok but still wish to overcome two issues for batch prcess
1. picking up the blocks by selection
2. click the alternative block numbers of times to match the numbers of attribute values I needed.
How to modify this lisp I can run it by block name selections instead of picking selection which enable me to run batch process for numbers of drawing? That will be good...
Lisp & Demo file attached (Match attribute value, A, B & C to Attribute 1, 2 & 3).
View 3 Replies
View Related
Feb 15, 2012
We have a title block and border which is used in MS. If this is referenced using AMTITLE then it acts as expected. We issue these to some external people to create our drawings but they have been using CTRL-C and V to place them in a new drawing. ACAD does now not see them as a Title block or border but as blocks. We have a process to bring DWG's into SAP and this will check for a title block and border.
The issue is we need to fix these drawings and currently this means removing the borders and title blocks and placing new ones then adding all the attributes again. Is there a way to convert the blocks back to how they should be?
AutoCADM 2011 SP2
XP 32-Bit SP3
View 4 Replies
View Related
Jul 24, 2008
How to convert existing 2d autocad title block into Revit title block template?
View 7 Replies
View Related
Nov 8, 2013
Is there a way that I can create a block with text ('A') and when I insert the block and populate the block another block block will update also? I am wanting to create a block for x-sec flags, and detail callouts that update their detail titles.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
View 6 Replies
View Related
May 30, 2013
I have 2 drawings with the following content :
Drawing 1 : Contains tree blocks that have a specific scale dependant on the tree size
Drawing 2 : Contains a block with just a point and attribute data about the tree (name, size etc.)
This block is approximatly at the same location as the tree block (0,1 m precision)
Problem I want to join these two items together. In other words, in the tree block that is scaled correctly i want the attribute data with the name, size etc. These blocks don't have a corresponding unique number or something like that.
View 2 Replies
View Related
Feb 28, 2012
Is it possible to create a text block attribute in part sketch mode?
View 2 Replies
View Related
