AutoCad 2D :: Scalelistedit Not Working
Apr 30, 2013
All my drawings have loads and loads of obsolete scales on them. Trouble is, when I run the scalelistedit function, Autocad 2008 comes up with the following message:
'Unhandled exception has occurred in a component of your drawing.If you click continue, the application will ignore this error and attempt to continue.Index was outside the bounds of the array.'
This is driving me nuts because I don't know what this means and the long scale list is slowing down my work (especially when I 'copy-paste' bits of drawing from one autocad file to another.get my scalelistedit function working again!
View 9 Replies
ADVERTISEMENT
Jan 25, 2013
why my scalelistedit has stopped working and how i can recover it to make it work again
View 3 Replies
View Related
May 19, 2011
Anytime I try to add a custom scale either by selecting the "custom scale" option from the paperspace viewport scale menu or by entering the command SCALELISTEDIT manually, the dialog box doesn't appear.
It's not that the box isn't opening because all other buttons and functionality are restricted in AutoCAD until I hit escape to exit out of the command. It's as if it's opening on a separate monitor, except it doesn't appear on my secondary monitor when I plug it in either.
Is there a command where I can manually add a custom scale or a property that I can change to force the box to be docked?
View 9 Replies
View Related
Aug 31, 2011
I have 2 files, A100 and C100, with C100 being xrefed into A100. Both have a few other xrefs in them, being used for whatever reasons, and must stay.If you open either file without the other being present, they open fine, but if they can find each other there's a 20-40 minute lockup.
C100 being a civil drawing, I thought the problem was one of the missing .shx files. So after spending countless hours trying to track it down, I finally noticed a warning when trying to open the files together that C100 had 2200+ scale lists. Using 2008 in the office, scalelistedit gives a runtime error, as well as the 2008 install at home. Using 2010, scalelistedit is successful in solving my 20-40 minute problem. (I did save back down to 2007..)
Now, back in 2008, the Style Manager won't open, as it says there is content from a newer version in the file. Also, any xrefs with AEC content, walls etc, come in without displaying said content.
View 9 Replies
View Related
Apr 20, 2012
I need to edit the scales and add custom ones, but when i type _SCALELISTEDIT, nothing happens, I know that its selected as my layout isn't any longer, but I can't find the darn window where the scales are located. I've also tried using the menu as well. This is for ALL drawings. New and already created.
View 8 Replies
View Related
May 16, 2011
I use the command -scalelistedit to clean the strange scale , i do purge , save , close and when I re-open the drawing the bad scales are back
View 2 Replies
View Related
May 6, 2007
I would like to be able to check if an Annotation Scale already exists and if it doesn't I would like to create it using the SCALELISTEDIT command and then set it to be the curent scale. I then plan to invoke the MLEADER command.
I do not want to have to rely on adding every possible scale in the list beforehand as my program would fall appart when a user decides to set an unusual scale I haven't thought of adding to the list.
See my initial start of the program.
(defun C:MLD ()
(command "cannoscale" "1:55") ;STOPS HERE WHEN 1:55 DOES NOT EXIST
(setq IfAnnoScaleExists (getvar "CANNOSCALE"))
(command "-scalelistedit" "add" "1:55" "1:55" "e")
)
View 5 Replies
View Related
Dec 4, 2012
I would like to execute scalelistedit command with auto added parameters (Reset - Yes - Exit).
My
doc.SendStringToExecute("-scalelistedit R " + "
" + "Y" + "
" + "E", true, false, false);
And doesnt work - I'm getting "Invalid option" and it seems like instead of R, passing is A option (Add).
View 1 Replies
View Related
Oct 12, 2013
any dwg. Save also create acad.lsp empty file any folder open I found this acad.lsp empty file...any dwg. Open my mbuttonpan, fillmode and zoomfactor not working after I set working
View 1 Replies
View Related
Jan 28, 2014
After install the Orgainzer works but the Photo Editor doesn't. When I click the Photo Editor in the splash screen it tells me my trial period is up. I'm using Windows Vista Home Basic 32 bit
View 5 Replies
View Related
Jan 1, 2013
Lightroom 3.3 just stopped working error says lightroom has stopped working and shuts down. installed photoshop CS3 is that the problem?
View 2 Replies
View Related
Oct 28, 2013
While working in AutoCAD, Sometimes everything just disappears.
I'll be working. I move a block, or draw a line, copy something, etc.. And after I execute the command, and finish. What I just moved,copied, drawn, etc, doesn't show up. I do a _regen, and EVERYTHING in the drawing disappears. If I zoon extents, everything is gone. I can undo commands, but nothing shows back up. If I save the drawing, and reopen the file. Everything shows back up. Is there a setting I need to click or something? It's getting really annoying. It happened 6 times in the hour.
My company recently upgraded to 2013 (from 2010), and we've had nothing but problems. It's one thing after the other with this version.
View 8 Replies
View Related
Oct 1, 2008
My 32 bits .net application works on 32 bits machines but is crashes on 64 bits ones with the following error
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to interface type 'Autodesk.AutoCAD.Interop.AcadApplication'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{8F17437C-2EFB-4FC4-8188-EEFA50FE7147}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)
It looks like it stops when trying to execute the following statement
Dim AcadApp As Autodesk.AutoCAD.Interop.AcadApplication = CType(Autodesk.AutoCAD.ApplicationServices.Application.AcadApplication, Autodesk.AutoCAD.Interop.AcadApplication)
View 8 Replies
View Related
Sep 13, 2011
I'm trying to get the MLeader example from the online Developer Guide to work but it keeps throwing an error.
[URL] ....
Any working example of MLeaders that are associated with their annotation?
View 1 Replies
View Related
Jun 7, 2012
Currently I have to dxfin a converted .job file to get my survey feature text and field comments into my drawing.
Question #1 How do I get rid of the point node associated with the points that have comments? All I want is the text, no nodes.
Question #2 What layer does the block come in on?
Question #3 Do I need to merge the block to my drawing?
Questoin #4 How do I manipulate the text? Can I create styles for it? Becasue it looks horrible as a .dxf block.
View 2 Replies
View Related
Mar 1, 2012
We use about 16 different ortho photos we use for maps. I have changed imageframe 0 1 2 and frame 0 1 2 3 in about every possible combination. The Tiff file will not show borders, but I can still select it and snap to it. I want the borders off I am using map 2012. Am I missing another variable? At one time the borders stayed off and I couldn't accidentally snap to the corners.
View 9 Replies
View Related
Jul 12, 2012
I've upgraded to Autocad 2012 LT and the F keys are not working. How to toggle them on?
View 8 Replies
View Related
May 18, 2011
Why Etransmit might not be attaching xrefs properly. I have sent an etransmit to someone who said information was missing. Sure enough when I opened it the x-ref wasn't displaying properly. It was still attached but it was shown as 'not found'.
View 1 Replies
View Related
Apr 28, 2012
I am working with AutoCAD 2012 on a single computer. It appears that the acad.pgp doesn't work. for example when i type DI in command line it refers to:
Command: di DDINSERT
Command: nil
but i have checked the pgp file and in it, the letters DI refer to command DIST. Also in Command Alias Editor they refer to command DIST. I have also tried this:
Command: (findfile "acad.pgp")
and the answer is:
"C:\Users\User\appdata\roaming\autodesk\autocad 2012 -english\r18.2\enu\support\acad.pgp"
View 9 Replies
View Related
Sep 21, 2011
is there a command in mechanical 2012 similar to FLATTEN,As this does not work on my comp for some reason. I do lot of 3d and then redraw on paper and do dims there after, some of the shapes are not curves themself but for dimensioning this is essential and redrawing over the top is just not an option.
View 4 Replies
View Related
Oct 17, 2013
I'm learning autocad structural detailing, and I'm having trouble with the 3DOSNAP function.
For generated objects, lets say a steal I beam, I can't position the cursor so it snaps to any of it's parts, vertex, ridge, anything. I's like the element dosn't exist. (This does not aply to manualy drawn lines or other objects alike, just for the elements)
View 1 Replies
View Related
May 18, 2012
I am working a very simple cabinet I am building and cant do hardly any work in 3D. I am working in AutoCAD 2010 and editing my drawing with the object lines hidden....I cant even run the mouse across the screen because the crosshairs feel like they are like a half a second behind where I am currently pointing. My PC isnt sluggish anywhere else, only when I am working in 3D.
View 9 Replies
View Related
Mar 22, 2013
I have just bought a spacemouse plus usb but im struggling to get it to work with windows 7 64bit.
Any driver for it? Ive looked on the 3dconnexion site and I dont think they support this type of space mouse any more.
View 0 Replies
View Related
Jun 19, 2012
I am working on a project where I am taking scans of the two pieces of a broken weld and trying to put them back together and I'm wondering if there is any program that can do this?
Some more information, I welded two pieces of metal together and then broke the weld. I then scanned the two pieces. Now I am trying to recreate a water tight model of the two welds together. The file format currently is .stl
View 9 Replies
View Related
Jul 30, 2012
My "delete" key on my keyboard has stopped working all the sudden, only in autocad though. I tried restarting my machine and switching keyboards and nothing has worked. Is there a setting in ACAD that disables the delete key from erasing objects?
View 1 Replies
View Related
Feb 14, 2013
When my toolbar is loaded (by menuload or netload), the F2 doesn't work anymore, it does open but it goes hiding at the back of Autocad. I know that I don't give a lot of information but I just don't know what other information you could need .. so feel free to ask
View 1 Replies
View Related
Mar 3, 2013
have just loaded 2013 along with service pack.
dtext function not working. when doing dtext but using the insertion point of some previous text. will not move to next line unless some text placed on first line. is there a setting, no issue in 2011
View 1 Replies
View Related
Feb 21, 2011
ACA 2011 on Windows 7 64 bit.Walls, dors, windows, etc. stop working. (command starts, but does not run) The only way to get it back working is to do a install repair, which requires the original CD ROM. and screws up my settings.
I have noticed this working on the file that uses a project from an earlier version of ACA.How can I prevent this from happening.
View 5 Replies
View Related
Jun 9, 2005
ACLT2000 on a Windows XP machine.
In the last day, one of our users has lost his ability to Group. Whether he selects objects and then pulls down "Group" from the tools menu or vice versa, the objects do not group. The command line text doesn't give any errors or other indication of what is happening.
View 3 Replies
View Related
May 10, 2013
I am trying to write code to collect standard info from a csv file to be added to iProperties.
Following is the code I have so far.
Dim Separators() As Char = {""c} Words = ThisDoc.Path.Split(Separators) FilName = "C:VaultDesigns" & Words(3) & "Spec_Sheet.csv"
Dim ReadCSV As New System.IO.StreamReader(FilName) Dim WordSets As New ArrayList()
Do While ReadCSV.Peek <> -1 WordSets.Add(ReadCSV.ReadLine.Split(",")) Loop
i = 0 SName = iProperties.Value("Project", "Stock Number")
For Each wrd In WordSets If WordSets.item(i)(0) = SName Then iProperties.Value("Project", "Description") = WordSets.item(i)(1) iProperties.Value("Custom", "Finish") = WordSets.item(i)(2) End If i += 1 Next
The only problem I have is that this line crashes. I am not competent enough to understand why.
Dim ReadCSV As New System.IO.StreamReader(FilName)
View 3 Replies
View Related
Jan 4, 2013
I am trying to xref a file in and when I select open through _XATTACH nothing happens. No subsequent dialog box opens up asking me to choose location, rotation, attach/bind, etc. The command just dies and I am back in my dwg.
AutoCAD LT 2011
AutoCAD Civil 3D 2012
View 6 Replies
View Related
