Why Etransmit might not be attaching xrefs properly. I have sent an etransmit to someone who said information was missing. Sure enough when I opened it the x-ref wasn't displaying properly. It was still attached but it was shown as 'not found'.
View 1 Replies
i copy past the jpg in the model space and then modified it to fit in my frame.
i sent an e-transmit of my drawing but the logo didn't stick to it.
i was told to attach... should i modify the logo in Photoshop and then attach it as an xref ant then use e-transmit?
i have 2013 and the client has 2007 .
is there is a way to etransmit more than 1 drawing (over 100 files) in a faster more efficient way instead of opening every separate file and etransmitting file by file?
View 4 Replies View RelatedA few issues trying to etransmit in verison 2008
1) We can create one etransmit file but if we try to create a second one we get a fatal error. It doesn't matter if we try to etransmit the same files or a different set.
2) Also, if we etranmit the same batch of files with the same settings multiple times the etransmit dialog box shows a different amount of files that it's grabbing.
3) We have the settings set to grab the data extraction files, however the zip file that etransmit creates doesn't include the actual .dxe files. The data extractions are present in the .dwg files though.
I'm using AutoCAD Architecture 2012. I cannot get the darn thing to create an Etransmit file. I'm sure it is some setting that I'm missing, but for the life of me I can not find it! It runs everything just like it is creating the file, but when everything is done, there is no file. I thought maybe it is creating the file somewhere that I didn't tell it to create the file at, but I can't find the file any where on my computer.
what I'm doing now is closing out 2012 and opening the file(s) in 2011 and creating the etransmit there, because it works. Is this a bug for 2012?
The crashing is consistent every time I try this. Here is how I replicate the problem:
- Open a SheetSet.
- Right click on the sheetset and select Transmittal Setups.
- Click import.
- Select a template DST and click open.
- Check a setup and click import checked.
Civil 3D Locks and an error saying "AutoCAD Application has stopped working" pops up and whamo. I have custom eTransmit settings and here they are just in case,
[HKEY_CURRENT_USERSoftwareAutodeskAutoCADR19.0ACAD-B000:409ETransmitsetupsBack-Up]
"AEC_EXPLODE_DWG"=dword:00000000
"Name"="Back-Up"
"AEC_TEMP_SETUP"=dword:00000000
"AEC_INCLUDE_PROJ_INFO"=dword:00000000
[code]....
Converting files from Civil 3D 2013 to AutoCAD 2007. We are currently trying to utilize ETRANSMIT to share drawing files with our clients. When going through the command we choose "AutoCAD 2007 Drawing Format w/ Exploded AEC Objects"
This seems to work for everything except for the survey symbols. All of the linework, xrefs, labels and drefs come in fine when opening in LDD 2009. However upon closer inspection, we have no symbols: tress, power poles, gas meters, etc.
Sharing our files with a utility company becomes impossible without these symbols. Is there anything we can try?
Win 7 Pro 64-Bit - Dell T1600
Intel Xeon 3.30Ghz
8Gb RAM
Civil 3D 2013
I need to Veto ETRANSMIT in some cases, I stripped down my code to a msgbox that will ask if i want to Veto Or not
Imports Autodesk.AutoCAD.RuntimeImports Autodesk.AutoCAD.ApplicationServices<Assembly: ExtensionApplication(GetType(GHATransmit.Initialization))> Namespace GHATransmit Public Class Initialization Implements IExtensionApplication Public KillCommand As Boolean = False Public Sub Initialize() Implements Autodesk.AutoCAD.Runtime.IExtensionApplication.Initialize Dim dm As DocumentCollection = Application.DocumentManager Dim doc As Document = dm.MdiActiveDocument AddHandler
[code]....
Even if the e.veto has been sent to AutoCAD the ETRANSMIT command still continues.
I know that data referenced drawings can be included in an eTransmit. However the drefs don't appear to repath when doing so. Any way to promote data references using eTransmit?
For context, we are trying to find a good way to archive all the project files at certain milestones. eTransmit does a good job of gathering up all the files referenced in a sheet set. It appears to repath the acad xrefs but the drefs still refer back to the working model files.
I get an error when I try to eTransmit from the sheet set manager.An error occurred attempting to create the transmittal. Please make sure the target location is writable and that the target disk has sufficient space.
View 7 Replies View RelatedI am currently trying to etransmit or export one of our C3D drawings to CAD 2007 to send to a client. Every time I estransmit or export a lot of boxes appear on the exported file. Does anything know what they are or how to get rid of them? it won't let me freeze them, they all seem to be one block together.
View 3 Replies View RelatedI'm currently working on a project that requires that I eTransmit a large quantity of files, which is becoming very time consuming. I need writing a script that will allow me to etransmit all of the files at once.
My requirements:
- All .dwgs must be saved as individual .zip files with all references included.
- .zip file must have same name as associated .dwg (basically just swap extensions).
My progress:
- Seems very simple, basically my script is:
Qsave
-eTransmit
-CH
-SetupName
-C
ROADBLOCK!!!!!!! D:<
My problem is that I want to have AutoCAD return the filename sans extension and filepath when I'm prompted to input the filename for the .zip file. How can I do this? I've been looking up options using VBA, but with limited success given.
I have files that contain only XREFs, some have up to 20. When I try to use etransmit to share these files, the paths are still looking for the network and not the contents of the zip file.They are all Overlays Full path
I swear that it worked before but I cannot replicate it.I cannot share the zipped file with anyone not connected to our network as all references are lost.
When trying to etransmit a dwg from Civil 3D 2010 which has line/curve tags with tables built from them, we are getting output which has the table headers but no entries below. The cad user on the other end gets no line/curve data. The other user is on Civil 3D 2011.
View 5 Replies View RelatedI recently installed Autocad 2014 with Carlson Survey 2014. When I use Etransmit or file conversion i get a Fatal Error. when i uninstall the civil 3d object enabler, the problem goes away, but i need the object enabler and i need to convert files. Is this not a major issue that Autodesk would consider important enough to address, or is the object enabler minor in comparison to other issues?
View 4 Replies View RelatedI get the following error when trying to use etransmit on two different projects:"the following files could not be checked for links"..We use Revit Server. We have many projects which etransmit just fine from Revit Server.
I looked this up and the only info I found said that Revit Server is locking a link or links or the main file. I (and our IT dept) checked Revit Server for locking and did not find any issues. I have tried locating the consultant linked files on the Revit Server too.
I receive this error when testing eTransmit for Revit 2013. "etransmit encountered an error while trying to contact the server". Oddly, it is only a problem with on host, and not the other.
View 3 Replies View RelatedI want to attach image in Autocad 2010, i know the procedure to insert the image (.jpg,etc.). But my problem is that i dont want to send its original image that i used from my hard disk.
Is there any way to send drawing without sending its image file or wothout doing etransmit the file.
any dwg. Save also create acad.lsp empty file any folder open I found this acad.lsp empty file...any dwg. Open my mbuttonpan, fillmode and zoomfactor not working after I set working
View 1 Replies View RelatedAfter install the Orgainzer works but the Photo Editor doesn't. When I click the Photo Editor in the splash screen it tells me my trial period is up. I'm using Windows Vista Home Basic 32 bit
View 5 Replies View RelatedLightroom 3.3 just stopped working error says lightroom has stopped working and shuts down. installed photoshop CS3 is that the problem?
View 2 Replies View RelatedWhile working in AutoCAD, Sometimes everything just disappears.
I'll be working. I move a block, or draw a line, copy something, etc.. And after I execute the command, and finish. What I just moved,copied, drawn, etc, doesn't show up. I do a _regen, and EVERYTHING in the drawing disappears. If I zoon extents, everything is gone. I can undo commands, but nothing shows back up. If I save the drawing, and reopen the file. Everything shows back up. Is there a setting I need to click or something? It's getting really annoying. It happened 6 times in the hour.
My company recently upgraded to 2013 (from 2010), and we've had nothing but problems. It's one thing after the other with this version.
My 32 bits .net application works on 32 bits machines but is crashes on 64 bits ones with the following error
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to interface type 'Autodesk.AutoCAD.Interop.AcadApplication'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{8F17437C-2EFB-4FC4-8188-EEFA50FE7147}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)
It looks like it stops when trying to execute the following statement
Dim AcadApp As Autodesk.AutoCAD.Interop.AcadApplication = CType(Autodesk.AutoCAD.ApplicationServices.Application.AcadApplication, Autodesk.AutoCAD.Interop.AcadApplication)
I'm trying to get the MLeader example from the online Developer Guide to work but it keeps throwing an error.
[URL] ....
Any working example of MLeaders that are associated with their annotation?
Currently I have to dxfin a converted .job file to get my survey feature text and field comments into my drawing.
Question #1 How do I get rid of the point node associated with the points that have comments? All I want is the text, no nodes.
Question #2 What layer does the block come in on?
Question #3 Do I need to merge the block to my drawing?
Questoin #4 How do I manipulate the text? Can I create styles for it? Becasue it looks horrible as a .dxf block.
We use about 16 different ortho photos we use for maps. I have changed imageframe 0 1 2 and frame 0 1 2 3 in about every possible combination. The Tiff file will not show borders, but I can still select it and snap to it. I want the borders off I am using map 2012. Am I missing another variable? At one time the borders stayed off and I couldn't accidentally snap to the corners.
View 9 Replies View RelatedI've upgraded to Autocad 2012 LT and the F keys are not working. How to toggle them on?
View 8 Replies View RelatedAll my drawings have loads and loads of obsolete scales on them. Trouble is, when I run the scalelistedit function, Autocad 2008 comes up with the following message:
'Unhandled exception has occurred in a component of your drawing.If you click continue, the application will ignore this error and attempt to continue.Index was outside the bounds of the array.'
This is driving me nuts because I don't know what this means and the long scale list is slowing down my work (especially when I 'copy-paste' bits of drawing from one autocad file to another.get my scalelistedit function working again!
I am working with AutoCAD 2012 on a single computer. It appears that the acad.pgp doesn't work. for example when i type DI in command line it refers to:
Command: di DDINSERT
Command: nil
but i have checked the pgp file and in it, the letters DI refer to command DIST. Also in Command Alias Editor they refer to command DIST. I have also tried this:
Command: (findfile "acad.pgp")
and the answer is:
"C:\Users\User\appdata\roaming\autodesk\autocad 2012 -english\r18.2\enu\support\acad.pgp"
is there a command in mechanical 2012 similar to FLATTEN,As this does not work on my comp for some reason. I do lot of 3d and then redraw on paper and do dims there after, some of the shapes are not curves themself but for dimensioning this is essential and redrawing over the top is just not an option.
View 4 Replies View RelatedI'm learning autocad structural detailing, and I'm having trouble with the 3DOSNAP function.
For generated objects, lets say a steal I beam, I can't position the cursor so it snaps to any of it's parts, vertex, ridge, anything. I's like the element dosn't exist. (This does not aply to manualy drawn lines or other objects alike, just for the elements)
