any dwg. Save also create acad.lsp empty file any folder open I found this acad.lsp empty file...any dwg. Open my mbuttonpan, fillmode and zoomfactor not working after I set working
View 1 RepliesI am trying to use the FIELD function to automatically display the Y value for floor levels. I have chosen 'object', then selected a line (floor level line lifted to the correct height in the Y axis) then selected 'start' as the property to display, Format: Current units. The problem is the current units are mm but I want the floor levels displayed in Metres but when I try to change this by using the 'Additional Format' button the 'Conversion factor' box is greyed out so I cant convert the value and it wont let me manually edit the Field expression or else I would manually add [1e-007]
View 9 Replies View RelatedI have a client who is working on the edge of a MGA coordinate zone - as they are near the edge of the zone their scale factor is large and needs to be factored in to all setouts (it makes 50mm of difference over 100 metres.)
their previous solution has been to work day to day at 1 to 1 scale and then xreference this back into a MGA projection by using a scale factor around a single point false origin.
As they are moving away from this false origin - the scale factor is changing slightly.
Is it possible to create a user grid at 1 to 1 for the day to day use and then query this into a MGA drawing. via ADEQUERY to bring it back to MGA ?
when i am i the viewports and use the "scl" shortcut click zoom to scale nothing will happen i can zoom use anno. in the lower right corner or propties.
is there a buttom or a prompt that needs to be fixed.
My lot top mouse is not working no more with the zoom in and out command. I dont have and external mouse other than the one is install from factory on my lot top comp. It was working perfect, but i think i click something by mistake. I only learn enough to draw in cad but when it comes up to problems like this i do not know what to do. I was trying to copy a table with chairs from and other file and when i pasted to my drawing something happen so my mouse is not zooming in or out in my drawing .
View 5 Replies View RelatedI get an error about transparent zoom not working because it requires a regen. I do not want to turn the autoregen off.
View 1 Replies View RelatedThe good news is that, if I were righting a routine that locks up AutoCAD, I'm finished. The bad news is that I'm not.
The code below is the portion of a routine where I have the user select 2 points and then pass those points to the Zoom command and the M2P osnap. The problem is that, when the Mid Between 2 Points osnap tries to use the first point, it returnns an "Invalid point" message, enters a loop and locks ACAD.
(defun C:ZC ()
(setq PointOne (getpoint "First point of M2P "))
(setq PointTwo (getpoint "Second point of M2P "))
[Code].....
im using a laptop and the zoom in and out (up and down on scroll pad) wont work , is there a way ive locked this out
View 5 Replies View RelatedIn X5 holding [Shift] while zooming with the scroll-wheel decreases the zoom step size. In X6, holding [Shift] has no effect and CorelDraw zooms in the same large steps as when zooming without holding [shift].
I have both X5 and X6 installed. X5 performs as it should, X6 does not.
why [shift] has no effect? I desperately want the smaller zoom-steps back!
I'm working with objects big from 10 to 100 centimeters. When i use ctrl+alt+mmb to zoom, or the magnifying glass, it's too sensitive and hard to zoom in/out. How to solve this?
View 9 Replies View RelatedI have set "Zoom about mouse point" to "on" in Preferences for both ortho and perspective viewports. However, the function doesn't work in my perspective viewports.
View 3 Replies View RelatedThe zoom tools are not working in any of my 3ds max applications.Is this something system wide?
View 1 Replies View RelatedI have a Wacom Bamboo Capture, I'm on a Mac OSX 10.8.3, and I'm using GIMP 2.8.4.
The pen and tablet seem to work together fine, with pressure sensitivity and all, but when I attempt to use the gesture functions (such as rotation) GIMP doesn't respond.
I know the problem isn't with the hardware because the little "rotate icon" pops up when I do the gesture, it's just the way it is communicating with GIMP that is the problem.
C3d 2011 64 bit.
I created a property ("PLAT") for Parcels and want to hyperlink it to a PDF. How do I make that happen?
Do I have the ability to limit my layers to my Zoom Factor? I see other GIS Maps that have layers limited per how far you are zoomed into the drawing.
Can i adjust my Map Feature 'hatch' to be more faded per our color table or even send it to the back and still have the abiltiy to list my features after i publish to DWF?
The other day(most likely either coinciding with an update or maybe downloading another CC program) scrubby zoom and flick panning both stopped working. If I select the zoom tool scrubby zoom is greyed out.
Adobe Photoshop CS6 version 13.1.2 x32 EXTENDED
the zoom burst effect has stopped working in PSE 12! when I click the zoom burst function the photo distorts as designed but when i click the "add focus area" button on the photo it returns the whole photo to normal without focusing the part selected.I have uninstalled and reinstalled PSE 12 already with no effect.
View 3 Replies View RelatedIn a book I am working on, the zoom toggle suddenly stops working. It shows up, but moving the slider does not change the image size in the photo cell. I can still move the photo around in the cell, but cannot zoom in or out. I can right click to change to zoom to fill or zoom to fit, but cannot manually zoom in or out from that. Tried changing the default method to Z2Fit and Z2Fill, but neither mode solves the problem. I have been working on this book for a while, and the manual zoom has worked seamlessly up til now, and suddenly it doesn't work. I am hoping I accidentally hit a keyboard toggle to turn it off somehow, and just can't figure out how to get it back.
fwiw the problem cropped up as I started adding photos from another source, which were Nikon-based jpg files whereas all the rest previously added were either digitial scans (jpeg or tiff) or Pentax files (RAW & jpegs). I cannot imagine this has anything to do with the problem, but mentioning it just because its the only thing that was different when the problem cropped up.
Using LR 4.1, Windows 7
I checked my preferences and OpenGL is enabled, so I don't understand why it randomly stops working when I'm trying to get work done. Been working for less than four hours today and have had to restart Photoshop CS5.5 6 times. It starts working for a little while, then the "Scrubby Zoom" box becomes greyed out and the shortcut doesn't work as well.
Also when I hit space (hand tool) to drag the image around, that stops working at the same time as the zoom. I'm using an Intuos4 with this, haven't had problems with it until recently but there haven't been any significant changes in my machine (PC), which has a nice graphics card, processor, etc. I'm using Google Chrome, maybe it has something to do with my browser being open at the same time as PS?
I've used Photoshop 7 for around a year now, using it mainly to touch up digital photos. I've just upgraded to Photoshop CS, but I've found that I'm having difficulties with my keyboard.
Usually, to zoom in, I can press CTRL + +. However, when I do this, nothing happens. Also, when I make a mistake with the magnetic lasso tool, I can usually press my Delete key to undo the last fixed point. Again, this doesn't work. All that is on on my keyboard is "Number Lock", which just allows me to use the right hand number keypad. Even with this off, the problems still aren't solved.
When I select a hatch or polyline or any object with grips for that matter, and hold down shift to select multiple grips on the object or objects and then press my middle mouse button to pan or scroll it to zoom, the grips that I have selected de-select, meaning I have to set up the view so that all the grips I want to move are visible before selecting them.
This is only happening on some drawings (although it is most of them) and only when I use 2012 not 2011. Which system variable it is that has gone screwy that I need to reset? or is it something else?
Today, all of a sudden, two of my most used functions—holding down the space bar to move the image around and holding down CMD-space bar to zoom—just up and quit on me (I do like the "Scrubby" but it took a little getting used to. It's very touch screen-esque).
I did all of the normal trouble shooting such as deleting the prefs, relaunching, restarting, etc. Nothing. The functions work fine in the other CS5 programs.
I checked through all of the prefs thinking that perhaps I accidentally changed something but I couldn't find anything. If all else fails, I'll do an uninstall/reinstall but only as a last resort.
I did notice that Adobe finally fixed the Distort (in Full Screen Mode) bug that was killing me in CS4.
[URL] Bug is where the Hand move (by holding down Space bar and dragging) stops working. Issue appears to be a conflict with web browsers.
This bug is still present in Photoshop version 12.1 (CS 5). I don't use Firefox, I use Safari and Chrome. Quitting Safari did not fix the problem. Quitting Chrome DID fix the problem.
After install the Orgainzer works but the Photo Editor doesn't. When I click the Photo Editor in the splash screen it tells me my trial period is up. I'm using Windows Vista Home Basic 32 bit
View 5 Replies View RelatedWhen using mtext and a background mask and try to modify the border offset factor from the default of 1.5 , the factor reverts back to 1.0. If I type in 1.25 or 1.75, it will not save it and revert to 1.0. If I put in a larger number like 2.0 or 3.0, that factor will be retained.
View 4 Replies View RelatedLightroom 3.3 just stopped working error says lightroom has stopped working and shuts down. installed photoshop CS3 is that the problem?
View 2 Replies View RelatedWhile working in AutoCAD, Sometimes everything just disappears.
I'll be working. I move a block, or draw a line, copy something, etc.. And after I execute the command, and finish. What I just moved,copied, drawn, etc, doesn't show up. I do a _regen, and EVERYTHING in the drawing disappears. If I zoon extents, everything is gone. I can undo commands, but nothing shows back up. If I save the drawing, and reopen the file. Everything shows back up. Is there a setting I need to click or something? It's getting really annoying. It happened 6 times in the hour.
My company recently upgraded to 2013 (from 2010), and we've had nothing but problems. It's one thing after the other with this version.
My 32 bits .net application works on 32 bits machines but is crashes on 64 bits ones with the following error
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to interface type 'Autodesk.AutoCAD.Interop.AcadApplication'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{8F17437C-2EFB-4FC4-8188-EEFA50FE7147}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)
It looks like it stops when trying to execute the following statement
Dim AcadApp As Autodesk.AutoCAD.Interop.AcadApplication = CType(Autodesk.AutoCAD.ApplicationServices.Application.AcadApplication, Autodesk.AutoCAD.Interop.AcadApplication)
I'm trying to get the MLeader example from the online Developer Guide to work but it keeps throwing an error.
[URL] ....
Any working example of MLeaders that are associated with their annotation?
Currently I have to dxfin a converted .job file to get my survey feature text and field comments into my drawing.
Question #1 How do I get rid of the point node associated with the points that have comments? All I want is the text, no nodes.
Question #2 What layer does the block come in on?
Question #3 Do I need to merge the block to my drawing?
Questoin #4 How do I manipulate the text? Can I create styles for it? Becasue it looks horrible as a .dxf block.
We use about 16 different ortho photos we use for maps. I have changed imageframe 0 1 2 and frame 0 1 2 3 in about every possible combination. The Tiff file will not show borders, but I can still select it and snap to it. I want the borders off I am using map 2012. Am I missing another variable? At one time the borders stayed off and I couldn't accidentally snap to the corners.
View 9 Replies View RelatedI've upgraded to Autocad 2012 LT and the F keys are not working. How to toggle them on?
View 8 Replies View Related