VideoStudio :: MPEG-4 HD Output File With Glitch
May 7, 2012
I have the following problem. I've created a project which takes about 20 minutes. The projects contains foto's and video's (MTS 1920x1080). When I create an output file in the MPEG-4 HD format there is one point is my video where there is a Glitch.
There is one MTS file in my video where I see some white flickering, which is very disturbing.
I've performed some tests to try to solve the solution, but I think it seems that there is a fault or error in the VSX file.
Below I've added some of the results of some things I've have tried:
When I drag that one MTS file in my project to another location the flickering seems to stay at the same place but then in another video.
When I remove that one MTS file from my project the flickering is gone. It's a solution, but not at this point, it should be working.
When I play the video in Windows Media Player then I see the flickering, but when I play it with Video Lan then I don't see it. If I play the video on some computer with Media Player it also should be working.
Also when I export the video in the AVCHD (1920x1080P) format the flickering doesn't occur.
View 7 Replies
ADVERTISEMENT
Sep 11, 2013
I have created a video consisting a many photos with some video. Some photos, e.g. a horizontal close striped golf shirt, gives a flickering effect in the output video file.
I do have the anti-flickering filter checked. Ran a test with filter off, but this did not correct it. Offending photos are approx. 2.5 meg JPEGs.
View 1 Replies
View Related
May 3, 2012
I'm testing demo version of this product and I would like to know how to change output parameters of mpeg-4 codec (Share->Create Video File->MPEG-4-> MPEG-4 HD). I live in Europe and my video source is Full HD 25fps, but Video Studio's mpeg-4 codec has only parameter constants 30fps.
View 5 Replies
View Related
May 7, 2012
Working with family project (captured by someone else-not me). Gist is that the raw AVI file doesn't have any sound when I play in media player or VSX2. The avi video format shows up as mpeg4s Decoder DMO and the audio as "Unknown ACM Format". I naively used this to make an mpeg vid file and tried to tweak the audio using LPCM but the resulting file has no audio either. The avi shows the video compression as mpeg4 but when I use my mpeg4 converter it doesn't recognise it so it's obviously an avi file with an mpeg4 video compression used.
Is there any way to recover the audio in these circumstances?
View 5 Replies
View Related
May 28, 2011
Loaded a MPEG-4 Media File 3Gb, went to setting, clicked on Smart Proxy cue manager, waited 40min and clicked ok. I check my Smart proxy file manger and it was there. My power went out, when I reload CV my files in Proxy manager were no longer there, and my file is back to being slow and jerky, that means I have redo this again.
does this mean I have to cue manger every time I wish to work with the same file?
View 7 Replies
View Related
Aug 19, 2012
I was trying to 'create a video file' when I received this message, 'Ulead VideoStudio [2000:1:1] Failed to open the MPEG encoder.
I've made countless movies and this is the first time I'm having this problem. Maybe I had it in 2008, but I've just turned 70 and remembering what I did then is a thing of the past!
View 3 Replies
View Related
Jun 28, 2011
Error message:
"Failed to open MPEG encoder".
I'm using Ulead VideoStudio 11+ and when I try to render a completed video to a file I receive this error message. The video is a little large, one hour fourteen minutes, so I cut it in half, saving it under a different name and it still gave me the same error message. However, if I render a very small clip then it renders as it's suppose to.
I've never had this trouble before. I reloaded the software for 11+ but that didn't work.
View 2 Replies
View Related
Apr 12, 2012
I have captured 16:9 DV CAM footage from a Sony A1 camera using ULead Video Studio 11, using a firewire, as AVI DV files and edited it in a project in the same format:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
I want to render it into the same to create an AVI master file.
I don't know about Audio data or Video data rates and how to set them for capture or rendering - I'm pretty new to editing.
ULead for creating the best quality output file at this stage, or do I just do a Same as Project Properties render? Are there any drawbacks / issues to those tips?
I'm using my HP Probook 4710s with 32 bit Windows, Intel Core 2 Duo T5870 / 2GHz (Dual Core) processor, 3GB Ram DDR2 SDRAM 800 MHz, 2MB-L2 cache memory, 512 MB video memory.
View 5 Replies
View Related
Oct 4, 2010
I used VideoStudio Pro X3 to create a project and I created 30 chapters, but when I create the output video file (Blu-Ray NTSC H.264 1920x1080), the chapter information is not retained, so all I have is one big video file and don't have the ability to skip to other chapters.
View 2 Replies
View Related
Dec 10, 2011
I am evaluating VS Pro X4 (trial version) and one of my tests consists in importing a .m2ts clip, strip some parts of the original clip and save it in the same formats (codec, resolution, aspect ratio, file) as the imported clip.
The original clip is a NTCS HDMV file format (with the .m2ts extension), H.264 video 720p60 (16:9), digital Audio Dolby (AAC).
I'm able to do the first 2 steps without any problem. However, when I want to save the result in a file, I cannot find any way to indicate the software to save in the same format as the original clip. So I am looking for any way to save the video in a 720p60 (59.94 to be accurate) with the same video and audio codec that can be read by a PS3 console (H264, AAC) as a .m2ts file.
Is it possible to do this using VS Pro X4? Or do I need to use a non-trial version? Or do I need to use the Ultimate version? Or is it simply impossible to do this (yet)?
Things I tried:When I want to create a video file, and choose "as per project's parameters". But it appears they are set to NTSC SD for DVD-like output. If I go in the project's parameters menu, there is no way I can set the resolution to 720p60 HD.Among the AVCHD outputs in "Create a video file", I only find 1080i and 1080p resolutions. Same for Blu-Ray outputs. Why is there no 720p resolution in both outputs?In the "Customized" output, there is no way I can set the resolution to 720p60 HD. Is it normal?
View 3 Replies
View Related
Oct 17, 2010
how to configure an output file in the best possible format for uploading to youtube using VS X2. The youtube tutorial here is a bit out of date. My input file is as follows:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
I have been creating an mpg file but I think its better to create an mpeg4 file as it is smaller and quicker to upload I think. I also want to maintain the 16:9 format.
I found the following recommendations on the youtube website: YouTube can accept almost any video format for upload, but for most users we have found the following settings give the best results.
Video Format: H.264, MPEG-2 or MPEG-4 preferred
Aspect Ratio: Native aspect ratio without letterboxing (examples: 4:3, 16:9)
Resolution: 640x360 (16:9) or 480x360 (4:3) recommended
Audio Format: MP3 or AAC preferred
Frames per second: 30
Maximum length: 10 minutes (we recommend 2-3 minutes)
Maximum file size: 1 GB
My first question is - X2 has a built in mp4 "creator". Is this one OK or is the one downloaded and installed from divx.com better? What should the frame size be? On the compression tab what should the video settings be? As my input file is 25fps does that mean that my output should be the same even though youtube recommends 30fps?
View 14 Replies
View Related
Aug 23, 2011
When first making the video in Edit mode, is there any way to see the final output size before or after selecting Create Video File before the file is created.
If I choose Create Disk it will show the output size.
If not what would the maximum running time be for DVD output?
View 10 Replies
View Related
Jun 26, 2013
I've just completed my first project and when I attempt to create a video file for hard disk output I'm unsure what option I should select from the drop down box that gives me the highest quality without re-rendering the video.
My AVCHD 50p original files are according to the file properties in VSP -
PAL HDMV
H.264 Video
24bits, 1920/1080, 16.9
50.000 frames/sec
Variable bit rate (max.26000 kbps)
Dolby Digital Audio
48000 Hz, 5.1 channels 384 kbps
So it looks like I need to select AVCHD 1920x1080 50p however in the properties for that file creation, the video bitrate is max 20000 kbps (my video 24.7) and audio is only 2.0 (my audio 5.1).
I really would like to retain the 5.1 audio and my higher video bitrate.
Also when I view the project properties the video is shown as 1024 x 576.
PAL double (50 fps)
Microsoft AVI files
24 bits, 1024 x 576, 50 fps
Frame-based
Uncompressed
PCM, 48.000 kHz, 16 bits, 5.1 Channels
View 1 Replies
View Related
Oct 4, 2011
If I render a Videostudio-file of 15 minute in .mpeg, it is about 750 000 great, if I render it in .mp4 it grows to 1.200 000, why?
View 5 Replies
View Related
Apr 24, 2011
I know there must be a thread or post about the best MPEG settings when you are going through the steps to burn a DVD, but did a search and came up with nothing.
Those items in bold are checked in X4.
In the MPEG properties
● Do not convert
● Support X-Disc
● Two pass conversion
● Treat MPEG audio as non-DVD compliant
● Auto fade
● Play all
● Auto repeat
Lower field first?
Under Change MPEG settings/Customize do any of you change anything? General Tab and Compression? I know to move the slider under compression to 100%. Not sure about the rest.
View 6 Replies
View Related
Oct 30, 2010
I'm a recovering Roxio user. 6 years. Finally fed up with 2011 crashing everytime I tried to convert DVD to MPEG4. I just downloaded VS Pro X3 and how to do this. I'm assuming it can be done on this program.
View 1 Replies
View Related
Dec 3, 2013
When I burned an AVI (that I captured with VS X4) to a single layer dvd VS does the job, except that when I palce the dvd in my living room Sony player I have the following error message : The disk is dirty. I tried twice with the same result! When I capture directly to the mpeg format and then burn a disk I have no problem.
How I could convert AVI to MPEG (no menu, no edition) in a simple way?
View 4 Replies
View Related
May 26, 2013
I am using VS X6 ultimate that I purchased yesterday
I am capturing videos from VHS tape using an S-Video connection
I have tried different capture options settings and the capture always saves in MPEG
I believe that AVI has the least loss and would prefer to save in the AVI format since I intend to do some editing of the original content The end objective will be to burn reults to DVD
Can VS X6 capture files in AVI? If so, what settimgs should I use? Any settings that would be best for this type of transfer to HDD?
View 3 Replies
View Related
Oct 25, 2010
Capturing VHS to MPEG? Does this tutorial work?
[URL]
View 4 Replies
View Related
Apr 7, 2011
I did a ton of research on Video Editing software and decided to try VS Pro X4 first due to it's ease of use (good for me) and capabilities that I can grow into. So far I would say the experience has been positive and feel I could happily settle in with VS Pro X4 for the long haul, but have just a couple of questions I would like to resolve first. They may not be issues at all, but more due to my lack of knowledge, but figured experienced users like yourselves would be able to determine that in short order.
I've split my questions into separate (3) threads so that people don't have to suffer through content they're not interested in. Here's a brief run down on where I'm at and what I'm trying to do.
I'm about half-way through my 30day trial of VS Pro X4, and starting to feel a little more comfortable with the software, but a few things are still puzzling me. Granted I've only scratched the surface of the SW capabilities so far.
I'm a complete newbie to this digital video stuff, however I'm not a complete newbie to computers. Basically I have a shoeobox of old 8mm camcorder tapes (analog) and have finally decided to take the plunge and digitize them, mainly because we never end up watching the tapes 'cause it's such a pain.
First question; A friend of mine is letting me borrow his ADVC300 converter, connected to a Firewire400 card in my PC. VS Pro X4 capture works fine, was able to capture an entire 8mm tape. It was an entire tape because that's the way it was taped, it was a music performance so the tape ran through the whole show. I was able to add a simple title and burn to a DVD disc. What should I expect for MPEG compression when burning to a DVD? I couldn't fit it all on one DVD disc, had to split it into two discs, not a big deal, just thought the mpeg conversion would have compressed it more? Maybe that's wishful thinking on my part? It's a 2 hour & 2minute video which equals a large ~8.7Gb raw DV capture file through the ADVC. I know a DVD is 4.7Gb max so obviously the 8.7Gb raw file won't fit, but is 2:1 compression/conversion expecting too much for the mpeg conversion? Maybe there's some options I should be using to compress it more?
All in all I'm pretty happy with the ADVC to digital capture functions with VSPx4 so far.
View 8 Replies
View Related
Mar 1, 2011
Is it possible to Capture in MPEG FORMAT with Pro X4?
It was possible with Pro X2 but not with Pro X3.
View 2 Replies
View Related
Apr 17, 2012
Today I use a dvd maker freeware program...load this mpg file and it creates the dvd folder and I create the image from that. Total size is 4.2 and it reports using 94% of the dvd available space. Freeware program puts in extra screens advertisements so can't use it.
I attempt to use the share-create disc and import same mpg file and it reports in the bar that its 6.48GB. To me this is a problem and I can't understand why it reports it as 2.2GB larger than the actual file size. There is no menu its from a new project, nothing imported to the timeline, just open, create, import and my OS and every other program must be reporting it wrong.
View 1 Replies
View Related
Apr 26, 2012
I am having a difficult time Exporting my 640 X 360 Video In an Mpeg Format, I am making a YouTube Video in 640 X 360 ( 360P I believe the size is called ) only because that is what my source video size is. My original source video is " AVI - 30Fps " I have cut and fine tuned my 8 Second Video that took me 8+ hrs to figure out how to make
Under the Project Properties there are 2 format types available, MPEG and AVI. Under MPEG Project Options --> General, I have only 4 sizes to choose from in the frame size box, 720 x 480 - 704 X 480 - 352 X 480 - 352 X 240, And the user defined selection bullet is GREYED out.
Is it possible that because im using the trial version that I just cannot fully use the software, If so then I can go back and install my VideoStudio X4, I was hoping to Upgrade to X5 because I can directly import my Paint Shop Pro Layers as well as CorelDRAW too.
View 7 Replies
View Related
Nov 6, 2010
I have about 30 files with the extension .vsp. As it turns out, I can only convert two of them to .mpeg. I'm trying to figure out why that is by looking at every single detail I can to figure out why only two of them can convert but none of the other ones will be accepted. i just get an error message each and every time. The error message says that there is a file mismatch.
View 10 Replies
View Related
Jun 14, 2012
I just moved from a Sony HDV (HDR-HC3) camcorder to a Panasonic AVCHD one (HC V700). When rendering my final video, I've always used MPEG-4 HD. This new camcorder records in AVCHD. I'm not sure if I should be outputting to MPEG-4 HD or AVCHD. Before I had issues rendering in AVCHD, which is why I didn't use it.
What's the main differences in MPEG-4 HD vs. AVCHD? What are the advantages and disadvantages? Which one is better and the one I should use?
View 6 Replies
View Related
Mar 6, 2013
I have been using Pro 4X for just over a year now but have recently been experiencing crashes while encoding HD MPEG files. I have also just activated/unpacked the included music with the software and these issues just started after I did this. Note: I do not use the provided music but believe the conflict is because of this.
Problem signature:
Problem Event Name:APPCRASH
Application Name:vstudio.exe
Application Version:14.0.0.0
[code]....
View 1 Replies
View Related
May 8, 2010
Up until recently I had been able to capture a VHS movie using the ADVC-110, edit the avi files and put in transitions, save to a vsp file. Next I would go to Share> Create Video File> Custom. Since this an old movie of only fair quality I would select a bitrate of 6000. I was previously able to render 3 different movies of approx. 70 minutes in lenghth to mpeg-2 in 1 1/2 hours each. Now it suddenly takes 6 to 8 hours per movie. The cpu will go like gangbusters and render the first 50% of the movie in just 20 minutes, and then slow down and take hours for the last 50%. I have Spy Sweeper and other running progs. and apps. shut off, screen saver disabled, internet connection off and D-Link not in use. I am using my "D" drive for all my files, which has nearly 1 TB, and I have plenty of available memory. what causes it to slow down, and what I might try? OS: XP; MB: ASUS P5QL-E; GC: NVIDIA GeForce 9500 GT; SC: Real tek High Def Audio; Processor: Intel 2 Core Duo @ 3.33 GHZ; Hard Drive: C: 300 GB, D: 1 TB; Memory: 3GB.
View 2 Replies
View Related
Feb 20, 2013
My footage are .mts files and edited to .vsp files with "Lower Field First" with VS X4. I have no problems in converting to video files using "Same as Project Settings". Now I wanted to try with "MPEG Optimizer" and the resulting settings given by VS X4 are:[
View 8 Replies
View Related
Nov 20, 2011
I recently used two Camcorders at a wedding and one (Panasonic NV-GS500) when connected via firewire to VS XP Pro3 showed up straight away with DV (AVI) download option - which is obviously the quality I want/need. The other Camcorder was a Canon HDV HV30 and it only offered MPEG download quality option. Both camcorders used Panasonic DV tapes and both are HD Digital camcorders so why would one offer DV and the other MPEG?
How do I capture from the Canon in AVI? I turned every thing off (VS and canon camcorder) and this time DV option presented itself.
View 2 Replies
View Related
Nov 20, 2013
The following didn't eventually cause me a problem since I have retained some earlier versions of VS. Normally, starting way back with VS version 8, I've happily downloaded avi files from my handicam, edited them and made nice home movies on DVD, worth watching even by non-family .
But now I've just been given a couple of mpeg-4 files (total time of 1 hr 20 min or so) to turn into a nicely edited DVD (it's an orchestral concert). If I insert the files into the timeline in either X5 and X6, the audio doesn't sound when I try to play either the project or the clip. Do the same with X4 and things work perfectly, audio comes through loud and clear. So I've used X4 for the task, I kept it on my computer.
An additional task was to make an audio CD - no sweat, I just created a sound file (in the "share" tab) with X4 and went from there. Trying to do the same with either X5 and X6 caused the software to crash with an error message.
error message
View 4 Replies
View Related
May 14, 2011
I have a project with only photos (about 200) and 3 songs. Total length is about 16min. I have successfully created a .MPG (2.3GB) and .WMA (474MB) HD files.
My problem is when I create a MPEG-4 HD files. It kept crashing the program while "Creating File..."
Error message, "The program has encountered an unspecified error and has stopped functioning. Please contact Corel Technical Support and send the dump file for analysis."
I tried another project with photos and music only and encountered the same problem. Shortening the project yielded the same (one song and a few pictures).
I tried using "Custom" and using the HD settings resulted in the same error. Nothing works.
My patches are up to date. How to create Hi Def movie files that I can playback with and Apple computer (Quicktime).
View 14 Replies
View Related
