VideoStudio :: Save Output File As M2TS For PS3 Viewing?
Dec 10, 2011
I am evaluating VS Pro X4 (trial version) and one of my tests consists in importing a .m2ts clip, strip some parts of the original clip and save it in the same formats (codec, resolution, aspect ratio, file) as the imported clip.
The original clip is a NTCS HDMV file format (with the .m2ts extension), H.264 video 720p60 (16:9), digital Audio Dolby (AAC).
I'm able to do the first 2 steps without any problem. However, when I want to save the result in a file, I cannot find any way to indicate the software to save in the same format as the original clip. So I am looking for any way to save the video in a 720p60 (59.94 to be accurate) with the same video and audio codec that can be read by a PS3 console (H264, AAC) as a .m2ts file.
Is it possible to do this using VS Pro X4? Or do I need to use a non-trial version? Or do I need to use the Ultimate version? Or is it simply impossible to do this (yet)?
Things I tried:When I want to create a video file, and choose "as per project's parameters". But it appears they are set to NTSC SD for DVD-like output. If I go in the project's parameters menu, there is no way I can set the resolution to 720p60 HD.Among the AVCHD outputs in "Create a video file", I only find 1080i and 1080p resolutions. Same for Blu-Ray outputs. Why is there no 720p resolution in both outputs?In the "Customized" output, there is no way I can set the resolution to 720p60 HD. Is it normal?
View 3 Replies
ADVERTISEMENT
Nov 11, 2013
I tried to provide as much information in the subject line as possible. I have been keeping my VS installations up to date and so I have VS X6 installed on Windows 8.1. I just purchased a new Sony HDR-CX290 camcorder. I have transferred 3 or 4 video files from the camera to my computer using the Sony transfer software which saves it as a *.m2ts file. VS X6 can open the files, I can place it in my timeline. I can run the split by scene and other edit utilities. I even have gone through the process to test and create a disc without any issue. However, if I try to PLAY the clip in the project window, VS x6 crashes. I have uninstalled, rebooted, and reinstalled VS x6. I have tried reinstalling codecs. The files play without any issue in Nero and Windows Media player. Windows Movie Maker seems to open the files without issues as well. However, I have had my system to make discs via VS for a while now so I would prefer to not have to use a different program. Especially since I have invested in VS x6. I am outside my warranty window so from the sounds of it, I have no recourse to let Corel know if this is a bug or a known issue. I have installed VS X6 SP1 as well and it hasn't fixed the issue.
View 9 Replies
View Related
Aug 20, 2011
I have a h.264 video file in .m2ts format, captured using a TV card, and I want to burn this to an AVCHD DVD. I've been trying to do this with VSX4. I don't want the video to be re-encoded because it's already in a suitable format. If I open X4, and then Create Disc and insert the video, the video plays fine and everything looks OK. However, when I click Burn on the final screen, I get a message saying that the video will take some time to render (oddly, since I've chosen the option not to convert compatible files, and VS seems to be taking notice of this choice because if I de-select it, the video size on the disc indicator increases). If I click OK, the rendering process seems to start but it jumps to 3% and then nothing happens. It just sits there.
I thought maybe VS had a problem with the video, so I tried inserting it onto the timeline, and I can edit and output it from there without any problems. But, I can't burn it to AVCHD DVD without re-encoding it, which I don't want to do because it will reduce the quality of what is already a compatible file.
View 14 Replies
View Related
May 20, 2012
I independently verified the M2TS files using MediaInfo.exe to identify that they were 16:9 ratio. But Video Studio Pro X5 seems to "misread them" at import as 4:3 ratio.(both as I hover cursor over file before importing into VSx5 and after import) The result is that the loaded file in VSx5 has black vertical framing added on the left and right of the video image in the preview window and any derivitive video files. Additional Info: the M2TS files prior to loading into VSX5 play in Windows Media Player at 16:9 aspect ratio with no black vertical framing.
There don't appear to be any patches yet for VSX5. Since obviously the VSX5 file attributes themselves are whats in question here, I've put both the output of MedioInfo.exe and VSX5 for the M2TS files here:
MediaInfo Output:
General
ID : 0 (0x0)
Complete name : H:VideoEditing2012_5_20_0_8_56.M2TS
Format : MPEG-TS
[Code]....
View 2 Replies
View Related
May 3, 2010
I am just trying to save a PDF from my illustrator file. However, when I go to Save as, and select PDF, no dialog box opens to allow me to set how I want the file outputted. IF I just hit enter, the file does save.. its just like the Dialog box is hidden or not appearing. The reason I need the dialog box is because I need to add bleeds to the PDF and my default save doesn't do that.
View 3 Replies
View Related
Apr 12, 2012
I have captured 16:9 DV CAM footage from a Sony A1 camera using ULead Video Studio 11, using a firewire, as AVI DV files and edited it in a project in the same format:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
I want to render it into the same to create an AVI master file.
I don't know about Audio data or Video data rates and how to set them for capture or rendering - I'm pretty new to editing.
ULead for creating the best quality output file at this stage, or do I just do a Same as Project Properties render? Are there any drawbacks / issues to those tips?
I'm using my HP Probook 4710s with 32 bit Windows, Intel Core 2 Duo T5870 / 2GHz (Dual Core) processor, 3GB Ram DDR2 SDRAM 800 MHz, 2MB-L2 cache memory, 512 MB video memory.
View 5 Replies
View Related
Oct 4, 2010
I used VideoStudio Pro X3 to create a project and I created 30 chapters, but when I create the output video file (Blu-Ray NTSC H.264 1920x1080), the chapter information is not retained, so all I have is one big video file and don't have the ability to skip to other chapters.
View 2 Replies
View Related
May 7, 2012
I have the following problem. I've created a project which takes about 20 minutes. The projects contains foto's and video's (MTS 1920x1080). When I create an output file in the MPEG-4 HD format there is one point is my video where there is a Glitch.
There is one MTS file in my video where I see some white flickering, which is very disturbing.
I've performed some tests to try to solve the solution, but I think it seems that there is a fault or error in the VSX file.
Below I've added some of the results of some things I've have tried:
When I drag that one MTS file in my project to another location the flickering seems to stay at the same place but then in another video.
When I remove that one MTS file from my project the flickering is gone. It's a solution, but not at this point, it should be working.
When I play the video in Windows Media Player then I see the flickering, but when I play it with Video Lan then I don't see it. If I play the video on some computer with Media Player it also should be working.
Also when I export the video in the AVCHD (1920x1080P) format the flickering doesn't occur.
View 7 Replies
View Related
Sep 11, 2013
I have created a video consisting a many photos with some video. Some photos, e.g. a horizontal close striped golf shirt, gives a flickering effect in the output video file.
I do have the anti-flickering filter checked. Ran a test with filter off, but this did not correct it. Offending photos are approx. 2.5 meg JPEGs.
View 1 Replies
View Related
Oct 17, 2010
how to configure an output file in the best possible format for uploading to youtube using VS X2. The youtube tutorial here is a bit out of date. My input file is as follows:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
I have been creating an mpg file but I think its better to create an mpeg4 file as it is smaller and quicker to upload I think. I also want to maintain the 16:9 format.
I found the following recommendations on the youtube website: YouTube can accept almost any video format for upload, but for most users we have found the following settings give the best results.
Video Format: H.264, MPEG-2 or MPEG-4 preferred
Aspect Ratio: Native aspect ratio without letterboxing (examples: 4:3, 16:9)
Resolution: 640x360 (16:9) or 480x360 (4:3) recommended
Audio Format: MP3 or AAC preferred
Frames per second: 30
Maximum length: 10 minutes (we recommend 2-3 minutes)
Maximum file size: 1 GB
My first question is - X2 has a built in mp4 "creator". Is this one OK or is the one downloaded and installed from divx.com better? What should the frame size be? On the compression tab what should the video settings be? As my input file is 25fps does that mean that my output should be the same even though youtube recommends 30fps?
View 14 Replies
View Related
Apr 10, 2012
I have M2TS video files stored on my computer. When I import a file into LR4, I have no sound. I also tried importing files directly from my Sony camcorder, but still have no sound.
View 2 Replies
View Related
Aug 23, 2011
When first making the video in Edit mode, is there any way to see the final output size before or after selecting Create Video File before the file is created.
If I choose Create Disk it will show the output size.
If not what would the maximum running time be for DVD output?
View 10 Replies
View Related
Jun 26, 2013
I've just completed my first project and when I attempt to create a video file for hard disk output I'm unsure what option I should select from the drop down box that gives me the highest quality without re-rendering the video.
My AVCHD 50p original files are according to the file properties in VSP -
PAL HDMV
H.264 Video
24bits, 1920/1080, 16.9
50.000 frames/sec
Variable bit rate (max.26000 kbps)
Dolby Digital Audio
48000 Hz, 5.1 channels 384 kbps
So it looks like I need to select AVCHD 1920x1080 50p however in the properties for that file creation, the video bitrate is max 20000 kbps (my video 24.7) and audio is only 2.0 (my audio 5.1).
I really would like to retain the 5.1 audio and my higher video bitrate.
Also when I view the project properties the video is shown as 1024 x 576.
PAL double (50 fps)
Microsoft AVI files
24 bits, 1024 x 576, 50 fps
Frame-based
Uncompressed
PCM, 48.000 kHz, 16 bits, 5.1 Channels
View 1 Replies
View Related
May 2, 2012
Switch to Inventor many years ago. I have an old Vellum file I need opened and save to a pdf for viewing?
View 2 Replies
View Related
Jun 30, 2013
Video Studio Pro X5: I've saved a project with several clips and then tried to "Share" the video using Create Video File. After I get to the Save screen and click Save with a filename, nothing happens - it does not start rendering and no file is saved. But then I saved a short clip from the same file as a separate Project File, and I was able to create a video file or the short clip.
What would cause Share not to be able to create a Video File from a Project File?
View 8 Replies
View Related
May 29, 2012
I have X5 and am trying to figure out how to get the specific entries in the Media File area to save with the project they were used and saved in.
If I use 5 video and 1 audio files in a saved project, I would like those 6 entries to show up in the media library each time I open the project.
Is there a way to do that?
View 2 Replies
View Related
Sep 27, 2012
Many of my videos seem to be trimming and saving to a file. With a HD video at a high data rate, all I do is trim the video and save back to a file. However, I select the "Same as first video clip" to save to a new file. What I usually do is save the file and use a third party software to reduce the video the data rate I need.
In other to reduce the re-rendering time, I wish both processes could be done in VS's 'Options' button.
View 14 Replies
View Related
Feb 8, 2012
I'm running Windows 7 64-bit.. There is no error message, it just says Corel VideoStudio X3 has stopped working... The video is only 48 seconds long (A test video) 1280x720 and was recorded at 30fps.
I have an NVIDIA GeForce GTS 250 Video Card and a 3.4GHz processor and 6GB of RAM
View 5 Replies
View Related
May 20, 2012
I realise there are pros and cons to this question and the temptation is to opt for the highest quality, but the file sizes are huge. So, my camera files will be mainly 1080 files at 30fps, what will be the best file type/size to save files for future use. I don't really mind the rendering time and space isn't a huge problem, but the variety of file types is bewildering. Most clips will find their way to DVD but I don't want to reduce resolution as they might be used at a later date for Blu-Ray.
View 1 Replies
View Related
Dec 2, 2010
I recently installed VideoStudio Pro X3. Whenever I play back anything I tried edit the program crashes and a dump file error shows. I have tried using the smart proxy without success. I am trying to edit HD files *.mov. The files are only a couple of minutes so that should not be an issue. I also tried closing all other programs. When I try and playback I can only see a couple of seconds before it crashes. I am wondering if my computer does not have the resources to edit HD. I have 1024 MB of Ram.
View 4 Replies
View Related
Dec 25, 2011
I have videos from my camera at 1440x1080, and after I edit them on Videostudio x4, when I save them (using MPEG4HD or AVCHD for example), the resulting file size is larger than the original. So I decided to use an encoder such as Xvid for reducing the file size. I choose avi as the output format and then in the options I set the resolution to 1440x1080 (not listed in the standard combobox, btw) and choose Xvid as the encoder (also tried ffdshow). But the resulting video is a smaller picture with a big black border instead.
View 1 Replies
View Related
Oct 30, 2012
I am having an issue with Backburner (2013.0.0 & 2013.0.2). I recently tried to render a 2011 3ds Max File Through backburner and since then I have been getting this error:
INF Sending instructions for job '(File name)' to (computer name)
WRN Task Error for (computers name)
ERR Job '(file name)' (Autodesk 3ds Max 2013 (64-bit)) failed for Cosmo
ERR Error message: 3dsmax adapter error : Autodesk 3dsMaxDesign 15.0 reported error: Error writing to file "(out put location)".
My render farm and Backburner were working perfectly before this (using 3ds Max Design 2013 and Backburner 2013.0.0), however, ever since I tried to render out the 2011 file I am unable to render even fresh Max 2013 files through Backburner. I don't know if this is important info but the 2011 file was worked on in Max 2011 and 2013.
I rendered out the scene through 3ds max (not Backburner) and was able to save the the Jpegs to the same output location that I need to save to when rendering with Backburner (I have an external network drive so all the nodes can access the necessary data). When I change the file output to my Desktop Backburner works correctly and I do not get this error, however, I need to set the output to the network drive. I tried installing backburner 2013.0.2 and the hotfix file.
View 9 Replies
View Related
Feb 15, 2011
In creating a video output I am looking for WMV Frame Width 720 Frame Height 480. I have created outputs with WMV HD 720 30p that is 1280 by 720... My issue when I stream that wireless over to my game systems or even my laptop. I am getting lagg. I get no lag on video outputs with WMV 720 by 480. Those video I created with Microsoft MM. I just got VideoStudio and its great! , but my issue I would like to output to WMV 720 by 480 and I do not see that option.
I have been on game forums and wireless forums, and since the WMV 720 by 480 and still working. I am trying to use VS3 to output to that for testing.
My setup is that my game systems and laptop are connected to TV in the house so I stream our events to them for people to see.
WMV HD 720 30p that is 1280 by 720 - is causing the lagg...
WMV 720 by 480 - no lagg...
View 3 Replies
View Related
Apr 15, 2011
I use the VideoStudio Pro X4 to edit my videos.
This time I have some problems with the quality of my finished projects. I have tried to burn my project as both DVD and AVCHD. On DVD the quality was really poor with grainy picture.
The AVCHD disc was much better but there was lots of "strobe" in the movie. Especially where I have added transitions and text fields.
My raw video-files is HD video (MTS-files). I also use the proxy tools to make the editing go smoother. I think my computer should handle this without the Roxy, but it doesn't.
I use this settings for my project: Settings --> Project Properties:
Edit File Format: MPEG
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Lower Field First
(DVD-PAL), 16:9
Create Disc --> AVCHD:
MPEG files
24 bits, 1920 x 1080, 25 fps
Lower Field First
(HDMV-PAL), 16:9
H.264 Video
Video data rate: Variable (Max. 16000 kbps)
LPCM Audio, 48000 Hz, Stereo
Create Disc --> DVD:
MPEG files
24 bits, 720 x 576, 25 fps
Lower Field First
(DVD-PAL), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
View 14 Replies
View Related
Mar 1, 2012
Is it possible to edit a video, and have the output format, frame rate, etc r3epeat the input? So edit scenes etc, but not alter the quality from input.
View 8 Replies
View Related
Feb 22, 2012
I am working on a simple video with two (3 second) overlay video clips. In the preview window everything looks great. After compressing the overlay clips shrink in height revieling the top & bottom of the main clip. If I over-stretch the overlay clips they still shrink down. I have gotten it to work once (don't know why) but that rendering the audio dropped off when the overlay started and never came back. That's a separate issue.
I saw where one person trying to solve a different issue mentioned to streach the overlay clip by the corners only? Is that important? I also tried turning on and off the "stretch to fit" option. I am not seeing a patern? I have also tried keeping the aspect ration on and off but that does not seem to give consistant results. I am sure it is a combination of some type.
Main clip:
Data rate: 9421 kbps
Video: Windows Media Video 9
24 bit, 1920x1080, 29.970 frames/sec
Aspect Ratio: 1.78:1.00
Overlay clips:
Data rate: 1309 kbps
Video: Windows Media Video 9
24 bit, 1280x720, 25 frames/sec
Aspect Ratio: 1.78:1.00
View 1 Replies
View Related
Feb 10, 2013
I have a project with a number of mpg files in it. These mpg files were created using X3 from mts files.
I have done this many, many times. I created an mpg a few weeks ago without problems. Now, all of a sudden, I try to make the same mpg files and the exported video will stutter in places. It doesn't matter how many times I render the same project, the video stutters in the same exact spot. Like I said, I've done this many, many times and never had this problem.
what may have changed or been installed on my computer recently to cause this? I even reinstalled X3 with no luck.
View 5 Replies
View Related
Jan 8, 2012
Is there a way that you can convert a 4.3 import to a 16.9 output? I have imported a musical from a disc which is recorded in 4.3. I would like to output this as a widescreen video. I have tried putting in on the overlay track which gives a better output result but still has the borders each side.
View 5 Replies
View Related
Oct 22, 2012
I recently upgraded from VS Pro X4 to VS Pro X5 and was shocked to see that there is no option to output a project to FLV under '3 Share > Create Video File'. Is this a feature removal or am I cursed with a defective copy of VS Pro X5?
As you can see in the screen above, the option (which was located at the bottom of the menu in VS Pro X4) is absent in VS Pro X5.
View 3 Replies
View Related
Mar 13, 2012
I am using Corel Video Studio Pro X4, I have asked the below questions previously, so far there has not been a solution. It appears Corel do not have any way to contact them when there is a problem
I chose this programme over Cyberlink Power Director as it had the 5.1 mixer and 3D capabilities. I now find Power Director Ultra 10 now has the 3D Capability, the 3D works very well, but no 5.1 mixer only a pesudo type 5.1 sound, the programme itself looks to be excellent quality.
Should there be no solution to my above problems, then the only choice I have is to use Power Director, a pity.
My previously posts are below -
3D Anaglyph - viewtopic.php?f=1&t=44703
5.1 Sound - viewtopic.php?f=1&t=41984
View 2 Replies
View Related
Nov 6, 2013
Nowadays, MP4 is widely used video format in our daily life and slowly it became the best popular video format. For some DIY lovers, It believes that you always edit your movies using a video editor like Sony Platinum Suite, Magi Movie Edit Pro Plus and Corel Video Studio Pro, etc. to make a your own style video.
Really happened, I am also a DIY lover and I always to edit my video with Corel Video Studio Pro X6 for playback on my portable device or burn movie to DVD. For example, I am an office worker and I always take much time on my way to work. So I rip the DVD to MP4 on Mac and then edit it with Video Studio Pro X6 for a better enjoyment.
Now let’s cut to the chase! It is really a big and exacting Serendipity. Yesterday I rip and convert my DVDs to my Mac computer and then edit it with my Corel Video Studio Pro X6. To my surprise, Seven minutes HD mp4 video, it just takes 9 minutes to output it. Then suddenly I got an idea, have a test with the entire popular video editor and Make a comparison.
After the test，I found that The same material, the same color and then same configuration，Corel Video Studio Pro X6 is obviously faster than Magi Movie Edit Pro Plus, Premiere CC、EDIUS7.0 and Vegas12, etc. Then I Immediately the video to my MOTOROLA ME865 SD CARDS and then play it with my smartphone, it is very smooth; then I copy the video to my U disk, and inserted it into my hisense flat-panel TV, it works well, too.
Seven minutes of hd MP4, the volume is 592 MB, and then a minute within 100 m on average, that is, an ordinary DVD, hd can hold 45 minutes MP4, convenient to keep the family film. The Conclusion is that ulead video studio has a bright spot, the new version of their X6 version described output hd MP4 has unique advantage! That’s all!
View 1 Replies
View Related
