VideoStudio :: Output As For Input
Mar 1, 2012Is it possible to edit a video, and have the output format, frame rate, etc r3epeat the input? So edit scenes etc, but not alter the quality from input.
View 8 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: How To Change Sequence Of Input / Output Parameter In Subassembly
Nov 28, 2013I hope Autodesk can have a easier way to edit the "input/output parameter" sequence. Today I found I cannot even delete a parameter. Whenever I want to delete a parameter, SAC just frozen.
View 2 Replies View RelatedAutoCAD Civil 3D :: Subassembly Composer 2013 - Change Order Of Input / Output Parameter
Sep 24, 2013Is there a better an easier way to change the order of input/output parameters in the subassembly that i've created in SAC 2013 than the one where you have to go into a XML-file in the PKT archive file?
I've created my subassembly and I want to control the order of parameters to have a flow similar to the actual workflow.
VideoStudio :: No Input On 10.0?
Dec 15, 2012I have just tried the Videostudio 10.0 on Win 7. Everything is connected for to record from VHS, but I get no signal no matter how I tweak the settings.
View 4 Replies View RelatedVideoStudio :: How To Use Recorded DVD As Input
Sep 6, 2012I have a DVD that was made from transferring a VHS PAL tape to a DVD. I can't see how to input the contents into VSProX4.
I downloaded Wondershare and that was easy to use to create an input file and I used VSProX4 to edit the file and make a 2 minute clip which I put on Youtube. The problem is with that the Watermark "Wondershare" is shown on the clip. I assume I need to spend $50 to buy a copy of Wondershare to not have the Watermark.
I tried a download of Handbrake. That created M4V files but it doesn't seem as though those files are compatible with VSProX4.
It would seem to me a basic requirement for a Video Editor to pull in a video from an existing DVD. I didn't think I would need to look for a program to RIP the DVD. What am I overlooking??
On the DVD there are 7 files. 2 *.BUP files, 2 *.IFO files and 3 *.VOB files. With either of the two programs I used above to RIP the DVD I think I saw 17 or 19 chapters.
VideoStudio :: How To Change Audio Input
Mar 10, 2013In ULead VideoStudio is very easy, because I connect the Easy cap but I want to change the audio input by the Orange Input (Is connected the audio from the video of easycap, because the easycap Audio do not appear in recording devices to change the volume, because is too high).
Is Ulead VideoStudio SE is easy:
But in Corel Video Studio x2 x5 I can't change the audio input, only is the easycap audio input, but I want to change to the orange input.
VideoStudio :: Change Audio Input When Capturing
Jan 10, 2012I have been trying to change my audio input when capturing and i cannot seem to find a way to do this. I am using a logitech usb microphone or a plantronics one, however i cannot change it. It has it checked and grayed out, why isn't this an option?
View 2 Replies View RelatedVideoStudio :: S-Video Input And Bothersome Overlay Screens
Aug 2, 2012I must record some ultrasound machine output for some research I am doing. I discovered that your software would allow me to specify s-video as the source and so I was successful in capturing that output as well as the sound that went with it.
However, there are three vexing little problems that would make the program far easier to handle for this purpose:
1. Many actions in the program cause it to reset the source to the default internal camera instead of staying with my s-video selection. Is there a way to set the s-video as the default source?
2. When we begin the capture, Ulead displays an overlay every time telling us that the video quality is substandard and would we like to continue. Give the noisy signal that every ultrasound machine produces, this question comes up every time and has to be answered yes or no. Can the program be set to not show that overlay and cost us time?
3. After we answer the question posed by that overlay, if the machine doesn't "hear" any input, it defaults to an error within 1 second. So, before we answer the overlay question that we wish to continue, we have to have the person with the microphone talk continuously or the program will cancel the capture automatically. Again, is there a way around this time-consuming action?
VideoStudio :: Unable To Capture Analog Video Input
Feb 4, 2012In capture mode, choosing "capture video"I get error message "failed to initialize the video capture plug-in another program may be using it or this file has been moved" " open driver failed" 152.00.43.0 15023.4.2 my video capture device is a USB WDM 2860 and shows in the "source" window but no "format" can be chosen and no video comes through. The operating system is windows 7 64 bit. I have "Magix movie edit pro 17" and "Cyberlink Video Director" and both of these programs work with the same device and capture. Neither one of these applications are running while using Video Studio. I checked and nothing else is utilizing this USB WDM 2860 device. I reinstalled the software, installed the patches, and uninstalled the USB drivers and reinstalled them.
View 6 Replies View RelatedVideoStudio :: Creating WMV 720 By 480 Output?
Feb 15, 2011In creating a video output I am looking for WMV Frame Width 720 Frame Height 480. I have created outputs with WMV HD 720 30p that is 1280 by 720... My issue when I stream that wireless over to my game systems or even my laptop. I am getting lagg. I get no lag on video outputs with WMV 720 by 480. Those video I created with Microsoft MM. I just got VideoStudio and its great! , but my issue I would like to output to WMV 720 by 480 and I do not see that option.
I have been on game forums and wireless forums, and since the WMV 720 by 480 and still working. I am trying to use VS3 to output to that for testing.
My setup is that my game systems and laptop are connected to TV in the house so I stream our events to them for people to see.
WMV HD 720 30p that is 1280 by 720 - is causing the lagg...
WMV 720 by 480 - no lagg...
VideoStudio :: Output Quality On The DVD
Apr 15, 2011I use the VideoStudio Pro X4 to edit my videos.
This time I have some problems with the quality of my finished projects. I have tried to burn my project as both DVD and AVCHD. On DVD the quality was really poor with grainy picture.
The AVCHD disc was much better but there was lots of "strobe" in the movie. Especially where I have added transitions and text fields.
My raw video-files is HD video (MTS-files). I also use the proxy tools to make the editing go smoother. I think my computer should handle this without the Roxy, but it doesn't.
I use this settings for my project: Settings --> Project Properties:
Edit File Format: MPEG
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Lower Field First
(DVD-PAL), 16:9
Create Disc --> AVCHD:
MPEG files
24 bits, 1920 x 1080, 25 fps
Lower Field First
(HDMV-PAL), 16:9
H.264 Video
Video data rate: Variable (Max. 16000 kbps)
LPCM Audio, 48000 Hz, Stereo
Create Disc --> DVD:
MPEG files
24 bits, 720 x 576, 25 fps
Lower Field First
(DVD-PAL), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
VideoStudio :: Preview And Output Are Not The Same?
Feb 22, 2012I am working on a simple video with two (3 second) overlay video clips. In the preview window everything looks great. After compressing the overlay clips shrink in height revieling the top & bottom of the main clip. If I over-stretch the overlay clips they still shrink down. I have gotten it to work once (don't know why) but that rendering the audio dropped off when the overlay started and never came back. That's a separate issue.
I saw where one person trying to solve a different issue mentioned to streach the overlay clip by the corners only? Is that important? I also tried turning on and off the "stretch to fit" option. I am not seeing a patern? I have also tried keeping the aspect ration on and off but that does not seem to give consistant results. I am sure it is a combination of some type.
Main clip:
Data rate: 9421 kbps
Video: Windows Media Video 9
24 bit, 1920x1080, 29.970 frames/sec
Aspect Ratio: 1.78:1.00
Overlay clips:
Data rate: 1309 kbps
Video: Windows Media Video 9
24 bit, 1280x720, 25 frames/sec
Aspect Ratio: 1.78:1.00
VideoStudio :: X3 Stuttering MPG Output
Feb 10, 2013I have a project with a number of mpg files in it. These mpg files were created using X3 from mts files.
I have done this many, many times. I created an mpg a few weeks ago without problems. Now, all of a sudden, I try to make the same mpg files and the exported video will stutter in places. It doesn't matter how many times I render the same project, the video stutters in the same exact spot. Like I said, I've done this many, many times and never had this problem.
what may have changed or been installed on my computer recently to cause this? I even reinstalled X3 with no luck.
VideoStudio :: Converting 4.3 To 16.9 Output
Jan 8, 2012Is there a way that you can convert a 4.3 import to a 16.9 output? I have imported a musical from a disc which is recorded in 4.3. I would like to output this as a widescreen video. I have tried putting in on the overlay track which gives a better output result but still has the borders each side.
View 5 Replies View RelatedVideoStudio :: X5 No FLV Output Option
Oct 22, 2012I recently upgraded from VS Pro X4 to VS Pro X5 and was shocked to see that there is no option to output a project to FLV under '3 Share > Create Video File'. Is this a feature removal or am I cursed with a defective copy of VS Pro X5?
As you can see in the screen above, the option (which was located at the bottom of the menu in VS Pro X4) is absent in VS Pro X5.
VideoStudio :: No 3D Output And Or 5.1 Sound?
Mar 13, 2012I am using Corel Video Studio Pro X4, I have asked the below questions previously, so far there has not been a solution. It appears Corel do not have any way to contact them when there is a problem
I chose this programme over Cyberlink Power Director as it had the 5.1 mixer and 3D capabilities. I now find Power Director Ultra 10 now has the 3D Capability, the 3D works very well, but no 5.1 mixer only a pesudo type 5.1 sound, the programme itself looks to be excellent quality.
Should there be no solution to my above problems, then the only choice I have is to use Power Director, a pity.
My previously posts are below -
3D Anaglyph - viewtopic.php?f=1&t=44703
5.1 Sound - viewtopic.php?f=1&t=41984
VideoStudio :: Output HD MP4 Video
Nov 6, 2013Nowadays, MP4 is widely used video format in our daily life and slowly it became the best popular video format. For some DIY lovers, It believes that you always edit your movies using a video editor like Sony Platinum Suite, Magi Movie Edit Pro Plus and Corel Video Studio Pro, etc. to make a your own style video.
Really happened, I am also a DIY lover and I always to edit my video with Corel Video Studio Pro X6 for playback on my portable device or burn movie to DVD. For example, I am an office worker and I always take much time on my way to work. So I rip the DVD to MP4 on Mac and then edit it with Video Studio Pro X6 for a better enjoyment.
Now let’s cut to the chase! It is really a big and exacting Serendipity. Yesterday I rip and convert my DVDs to my Mac computer and then edit it with my Corel Video Studio Pro X6. To my surprise, Seven minutes HD mp4 video, it just takes 9 minutes to output it. Then suddenly I got an idea, have a test with the entire popular video editor and Make a comparison.
After the test，I found that The same material, the same color and then same configuration，Corel Video Studio Pro X6 is obviously faster than Magi Movie Edit Pro Plus, Premiere CC、EDIUS7.0 and Vegas12, etc. Then I Immediately the video to my MOTOROLA ME865 SD CARDS and then play it with my smartphone, it is very smooth; then I copy the video to my U disk, and inserted it into my hisense flat-panel TV, it works well, too.
Seven minutes of hd MP4, the volume is 592 MB, and then a minute within 100 m on average, that is, an ordinary DVD, hd can hold 45 minutes MP4, convenient to keep the family film. The Conclusion is that ulead video studio has a bright spot, the new version of their X6 version described output hd MP4 has unique advantage! That’s all!
VideoStudio :: X5 - MPEG-4 HD Output Properties?
May 3, 2012I'm testing demo version of this product and I would like to know how to change output parameters of mpeg-4 codec (Share->Create Video File->MPEG-4-> MPEG-4 HD). I live in Europe and my video source is Full HD 25fps, but Video Studio's mpeg-4 codec has only parameter constants 30fps.
View 5 Replies View RelatedVideoStudio :: Can't Seem To Convince X4 To Output A 640x480
Dec 24, 2011I can't seem to convince X4 to output a 640x480 (or 720x480) mainline MP4 that is 16:9 - they always come out as 4;3 letterboxed . Is there some way to install another MP4 Codec that will do it or will installing DivX or Xvid at least allow me to generate 16:9 .avi files at those resolutions?
View 11 Replies View RelatedVideoStudio :: Producing Blu-ray Compliant Output
Dec 26, 2011I am looking for producing Blu-Ray compliant output from VideoStudio. I have VS PRO X4 with SP2. The input is AVCHD from a Canon HF200 and the target is Adobe Encore.
The reason for Encore is that I need a good navigation solution. VS’s menu and navigation is somewhat primitive. But Encore is notoriously zealous about compliance. An had given up on getting Encore to recognize anything from VS as compliant but took another look and now I’m even more confused.
As a baseline, if you take the raw clips from the camera and put them into Encore it accepts that they are Blu-Ray (H.264/AC3) compliant and will not attempt to transcode them. This is what I want since the output will be essentially the same as the input so no loss and the time to output is quite fast. The exception to this is when something like a transition occurs then it must be rendered. What I was not expecting is that VS does not appear to render the whole clip. It renders the bit that has the transition or effect or title etc. up to the next GOP then appears to revert back to not transcoding again. I can’t be 100% sure of that but carefully watching the CPU and disk activity and showing the render progress it is quite obvious that when it gets to raw footage again it starts behaving like a file copy rather than a render. This suggests that SmartRender actually does try and do the right things.
I did try to put a clip at the front of the project then tell VS to render as per first clip. This did not work, the output was compliant but it decided to render everything. I would expect this to be the ideal case for NOT rendering but something went wrong. If you put an item that does need rendering followed by the raw clips it renders than flips into just copy. There seems to be a logic fault here somewhere. Then I found that if disabled SmartRender the output for was compliant but it rendered all the clips.
If I output the project as Blu-Ray (MPEG-2) it come out as fully compliant and Encore won’t touch it. Of course it is twice as big as the original and some degree of rendering must have taken place, although it takes only a fraction of the time for other renders. I am not sure why this is the case either. If I use the other options (like 1440x1080i) it is also compliant (although the scenes are totally distorted as you expect).
I also tried a custom preset setting the video to 1920x1080i with a max bit rate of 20000 H.264 and the AC3 to 384kbps. I know there are quite a few more factors in Blu-Ray compliant video but this is all I can set.
It seems no matter what I do I get compliant Blu-Ray output EXCEPT for the one I really want with SmartRender doing it’s thing.
All I can conclude from this is that VS can produce compliant Blu-Ray and SmartRender short circuits the render but for some reason already fully compliant video gets turned into non-compliant video.
VideoStudio :: HD Video - Output Quality
Apr 17, 2011I have been trying Video Studio a few times in the past. The first version I ever tried must have been Ulead Video Studio 7 or 8. I always liked the process oriented GUI and the goodies that are made so easy compared to other video editing software. I remember version 8 and next to be very unstable though, which is why I kept working with other software like Pinnacle. Each time there was a new version though I tried it and I have seen stability improving with every version. I would like to work with Video Studio a lot, however I have serious problems with output quality.
Since a few years I am filming HD video, AVCHD standard (1080i50) with a Panasonic HDC-SD5 and recently HDC-SD900. The last one, a new camera, offers incredible detail and quality. Of course I want to see the same quality in my end product, the output of the video editing software. Here is where I have a big problem.
1. When I save output as AVCHD an use smart rendering there are problems with the transition between two clips. There are blocks all over the place. I have tested this with X2, X3 and X4. I remember in X2 there seemed to be some frames in the wrong order at the end of each clip. In X3 there were blocks. In X4, which I am testing now, sometimes output is good, sometimes there are blocks worse than I ever saw in X3.
2. When I save as AVCHD, Bluray, H.264, ... no matter what format in 1080i without smart rendering there is a big quality loss. It is really visible, especially on the pc screen. I have tried many settings: bluray 2-pass encoding at 30.000bps, AVCHD and H.264 at 18.000bps. It seems to be impossible to get good quality out.
No matter what I did, I cannot even approach the input quality with Video Studio. And let's face it, it all comes down to the output!
I have tried encoding with some other free tools such as Handbrake and Staxrip. Of course these are not video editors, but at least I could compare the output quality.
VideoStudio :: Cuts Are Clipped On Output?
Feb 9, 2011I'm splicing together a couple of avi files and outputting as a 720p .wmv. The final file is about 15 minutes long. At each of the straight cuts (I'm not using transitions) in the output file, two or three seconds are cut off! I've tried outputting in different formats and it still occurs, but if I shorten the entire file to a minute or so, it doesn't happen. I've tried it with proxy on and off. I've edited in the very same configuration very often previously and haven't had this problem before.
View 5 Replies View RelatedVideoStudio :: X3 Cause Cracked Video Output
Mar 27, 2011i have vs x3, windows 7 x64, ati radeon hd 5730 with latest drivers. i edited 1920x1080, vbr 16000 kbps videos. i use mpeg optimizer, i says all video is %100 compatible with suggested values. result has cracked frames. it doubles some parts close to cut transitions. and it has some frames that has some boxes seems like compression errors that it has abnormal color lines.
when i uncheck "Perform smart render" it is ok.
VideoStudio :: Video Output For Vimeo
Nov 13, 2012I'd like to post some videos on Vimeo .
They footage was shot in DV CAM on a Sony A1 and the footage and the project is:
PAL (25 fps), Microsoft AVI files, 24 bits, 720 x 576, 16:9, 25 fps, Lower Field First, DV Video Encoder -- type 1 DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
Vimeo recommends the following settings:
Codec: H.264 (MP4)
Frame rate: same as shot ie 25 fps
Data rate: 2000 kbps (SD)
Choose 640×480 for 4:3 SD video, 640×360 for 16:9 SD video
If you have the option to control the pixel aspect ratio (not the display aspect ratio), make sure it's set to "1:1" or "1.00," sometimes referred to as "square pixels."
Deinterlacing: Maybe - if you are shooting on an older camera, enable the deinterlacing option. Otherwise, you may get weird-looking horizontal lines in your video. With newer camera models, deinterlacing shouldn't be an issue, so you can leave this option unchecked.
Audio
Codec: AAC (Advanced Audio Codec)
Data rate: 320 kbps
Sample rate: 44.1 kHz
When tying to create the file though the frame size for mp4 though does not seem to give an option for 640x360 on the drop down menu. 640 x 480 seems to make it look stretched? Should I choose 720 x 576 as it originally was?
Also, what should I do with the box 'perform non square pixel rendering?' and how does that relate to the pixel aspect ratio info? And what about the bit about deinterlacing - not sure what that means.
VideoStudio :: Project Output As AVI File?
Apr 12, 2012I have captured 16:9 DV CAM footage from a Sony A1 camera using ULead Video Studio 11, using a firewire, as AVI DV files and edited it in a project in the same format:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
I want to render it into the same to create an AVI master file.
I don't know about Audio data or Video data rates and how to set them for capture or rendering - I'm pretty new to editing.
ULead for creating the best quality output file at this stage, or do I just do a Same as Project Properties render? Are there any drawbacks / issues to those tips?
I'm using my HP Probook 4710s with 32 bit Windows, Intel Core 2 Duo T5870 / 2GHz (Dual Core) processor, 3GB Ram DDR2 SDRAM 800 MHz, 2MB-L2 cache memory, 512 MB video memory.
VideoStudio :: Output Frame Size
Apr 6, 2011I would like my DVD output to fill more of my (be larger) TV screen. I am copying VHS tapes to DVD using Sony DvDirect. The DVD files are then imported into Video Studio Pro 4, edited, and then output to DVD. The input and output is 4:3 and frame size is 720 x 480. I can't set this to a larger frame size using any of the tools I've found. Is it the frame size I want to increase?
View 10 Replies View RelatedVideoStudio :: Jerky Video Output From X3?
Nov 14, 2010Using a Canon Powershot G12 camera and it records 1280x720 px .mov, H.264, 23.976 fps.
Doesn't matter how my project properties are in Videostudio Pro X3. Think I tried almost everything. As soon as I create a video through VS Pro X3 (all update patches installed) the result is a jerky video. Using the recommended (by Corel) version of Quicktime, as the most recent Quicktime version causes VS to crash. Tried this on 3 different computers with the same result.
Project settings:
TV standard: 24 fps
Frame rate 23.976 fps
Frame Type: Frame based
Frame size: 1280x720 px
Compression: Doesn't matter (same result anyway)
Share:
Create Video File:
- Same as project = Jerky video
- Upload to YouTube (MPEG-4 HD 16:9) = Jerky video
- Xvid or any other format = Jerky video
Here is the file on YouTube as it should look (original .mov file from the camera directly uploaded to YouTube): [URL]
Here is the file on YouTube after created with Videostudio Pro X3: [URL]
VideoStudio :: X6 Output ALPHA Channel
May 27, 2013I need to output xparent alpha backgrounds in .png image sequences can X6 do this? Other formats are fine but preferably I'd like to use image sequences.
View 2 Replies View RelatedVideoStudio :: Single Red Frames In 720p Output?
Apr 7, 2011I'm seeing random occurrences of single all-red frames in my output. They seem to occur in the middle of a clip.
My clips are AVCHD (HDV captures from a Sony HDR-FX7 via Firewire using HDVSplit). I'm outputting them to "HDV 720p - 30p (for PC)". Total edited projects are 9-10 minutes each and I'm seeing 2-3 of these "red frames" per output file.
VideoStudio :: Chapters Not Created In X3 Output File
Oct 4, 2010I used VideoStudio Pro X3 to create a project and I created 30 chapters, but when I create the output video file (Blu-Ray NTSC H.264 1920x1080), the chapter information is not retained, so all I have is one big video file and don't have the ability to skip to other chapters.
View 2 Replies View RelatedVideoStudio :: X6 / Crash While Enter Output To Disk
Oct 6, 2013i found once the UVSX6 crash while editing burning disk, it will never enter the 'output to disk' dialog again for existing projects.
View 3 Replies View Related