VideoStudio :: Jerky Video Output From X3?
Nov 14, 2010
Using a Canon Powershot G12 camera and it records 1280x720 px .mov, H.264, 23.976 fps.
Doesn't matter how my project properties are in Videostudio Pro X3. Think I tried almost everything. As soon as I create a video through VS Pro X3 (all update patches installed) the result is a jerky video. Using the recommended (by Corel) version of Quicktime, as the most recent Quicktime version causes VS to crash. Tried this on 3 different computers with the same result.
Project settings:
TV standard: 24 fps
Frame rate 23.976 fps
Frame Type: Frame based
Frame size: 1280x720 px
Compression: Doesn't matter (same result anyway)
Share:
Create Video File:
- Same as project = Jerky video
- Upload to YouTube (MPEG-4 HD 16:9) = Jerky video
- Xvid or any other format = Jerky video
Here is the file on YouTube as it should look (original .mov file from the camera directly uploaded to YouTube): [URL]
Here is the file on YouTube after created with Videostudio Pro X3: [URL]
View 14 Replies
ADVERTISEMENT
Feb 19, 2013
I often have the problem that when I am editing a video in Videostudio Pro X5 the clips often seem jerky.
View 7 Replies
View Related
Aug 24, 2011
I have a number of video files captured at 1080X720 full frame resolution at 29.97 frames/second, shown on my PC as .MOV files.
When watching the original files either on my PC or TV, movement is fluid and smooth.
When watching a finished video created via VideoStudio Pro X4 using the aforementioned files, movement is jerky, and is particularly noticeable when watching a panned scene. The effect is so bad that it makes viewing on a large screen impossible as the picture movement jerks/judders about. I have looked at the project preferences, and notice under Project Option>General tab, the only available frame sizes are the standard ones which only go up to 720X576. The radio button to select a user defined frame size is greyed out and cannot be selected to input my own frame sizes. I’m therefore unable to actually input the frame size of the source video files.
Basically how do I render a finished video without jerky movement?
View 12 Replies
View Related
Jun 24, 2012
I’ve been using very happily been using x2 for a number of years to make a lot of movies from my standard definition camera, I’ve loved the programme, and it has generally been able to do everything I wanted, and made for an enjoyable editing process. However, the camera has finally given up and I’m now going down the HD route, and the old x2 version just keeps crashing with any new clips. So I have recently downloaded the trial version of x5 (5 days of trial left), with the intention of trying it out and then purchasing it.
Unfortunately however I have found it to be jerky and jumpy when editing clips together, particularly when using the overlay tracks, the more overlays the worse it gets. This happens when I want to watch the edit, and while the sound runs ok the video just freezes on a frame then jumps ahead a few seconds and freezes etc etc. Impossible to watch and edit to really.
I am using the smart proxy to get the files to a manageable size, and I can see the separate proxy files in explorer. Smart proxy enabled. I have all the acceleration on that can go on (the ”Enable Hardware Encoder Acceleration” is greyed out so I can’t tick it). When I share/render the movie it comes out just fine, so it’s only with the editing process that is jumpy. I have really enjoyed x2, and could get good results really quickly, and I enjoyed the editing interface and process with Corel VS, but am now thinking I might need to change to a different video editing programme.
Computer- HP Elitebook 8560w
Everything is just running off the laptop’s hard drive. I’ve installed The CVS x5 Service Pack 1
The project has only two clips – the first from a canon d550 as below
640x480 MOV
24 bits, 1848 frames
25.000 fps
73.92 secs
And the other from the net as below
MPEG-4 file
2890 KB
H 264 High Profile Video
989 frames
24 bits 640x480 4:3
30 fps
605 Kbps data rate
Project Properties
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Upper Field First
(DVD-PAL), 4:3
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
View 2 Replies
View Related
Nov 6, 2013
Nowadays, MP4 is widely used video format in our daily life and slowly it became the best popular video format. For some DIY lovers, It believes that you always edit your movies using a video editor like Sony Platinum Suite, Magi Movie Edit Pro Plus and Corel Video Studio Pro, etc. to make a your own style video.
Really happened, I am also a DIY lover and I always to edit my video with Corel Video Studio Pro X6 for playback on my portable device or burn movie to DVD. For example, I am an office worker and I always take much time on my way to work. So I rip the DVD to MP4 on Mac and then edit it with Video Studio Pro X6 for a better enjoyment.
Now let’s cut to the chase! It is really a big and exacting Serendipity. Yesterday I rip and convert my DVDs to my Mac computer and then edit it with my Corel Video Studio Pro X6. To my surprise, Seven minutes HD mp4 video, it just takes 9 minutes to output it. Then suddenly I got an idea, have a test with the entire popular video editor and Make a comparison.
After the test，I found that The same material, the same color and then same configuration，Corel Video Studio Pro X6 is obviously faster than Magi Movie Edit Pro Plus, Premiere CC、EDIUS7.0 and Vegas12, etc. Then I Immediately the video to my MOTOROLA ME865 SD CARDS and then play it with my smartphone, it is very smooth; then I copy the video to my U disk, and inserted it into my hisense flat-panel TV, it works well, too.
Seven minutes of hd MP4, the volume is 592 MB, and then a minute within 100 m on average, that is, an ordinary DVD, hd can hold 45 minutes MP4, convenient to keep the family film. The Conclusion is that ulead video studio has a bright spot, the new version of their X6 version described output hd MP4 has unique advantage! That’s all!
View 1 Replies
View Related
Apr 17, 2011
I have been trying Video Studio a few times in the past. The first version I ever tried must have been Ulead Video Studio 7 or 8. I always liked the process oriented GUI and the goodies that are made so easy compared to other video editing software. I remember version 8 and next to be very unstable though, which is why I kept working with other software like Pinnacle. Each time there was a new version though I tried it and I have seen stability improving with every version. I would like to work with Video Studio a lot, however I have serious problems with output quality.
Since a few years I am filming HD video, AVCHD standard (1080i50) with a Panasonic HDC-SD5 and recently HDC-SD900. The last one, a new camera, offers incredible detail and quality. Of course I want to see the same quality in my end product, the output of the video editing software. Here is where I have a big problem.
1. When I save output as AVCHD an use smart rendering there are problems with the transition between two clips. There are blocks all over the place. I have tested this with X2, X3 and X4. I remember in X2 there seemed to be some frames in the wrong order at the end of each clip. In X3 there were blocks. In X4, which I am testing now, sometimes output is good, sometimes there are blocks worse than I ever saw in X3.
2. When I save as AVCHD, Bluray, H.264, ... no matter what format in 1080i without smart rendering there is a big quality loss. It is really visible, especially on the pc screen. I have tried many settings: bluray 2-pass encoding at 30.000bps, AVCHD and H.264 at 18.000bps. It seems to be impossible to get good quality out.
No matter what I did, I cannot even approach the input quality with Video Studio. And let's face it, it all comes down to the output!
I have tried encoding with some other free tools such as Handbrake and Staxrip. Of course these are not video editors, but at least I could compare the output quality.
View 3 Replies
View Related
Mar 27, 2011
i have vs x3, windows 7 x64, ati radeon hd 5730 with latest drivers. i edited 1920x1080, vbr 16000 kbps videos. i use mpeg optimizer, i says all video is %100 compatible with suggested values. result has cracked frames. it doubles some parts close to cut transitions. and it has some frames that has some boxes seems like compression errors that it has abnormal color lines.
when i uncheck "Perform smart render" it is ok.
View 5 Replies
View Related
Nov 13, 2012
I'd like to post some videos on Vimeo .
They footage was shot in DV CAM on a Sony A1 and the footage and the project is:
PAL (25 fps), Microsoft AVI files, 24 bits, 720 x 576, 16:9, 25 fps, Lower Field First, DV Video Encoder -- type 1 DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
Vimeo recommends the following settings:
Codec: H.264 (MP4)
Frame rate: same as shot ie 25 fps
Data rate: 2000 kbps (SD)
Choose 640×480 for 4:3 SD video, 640×360 for 16:9 SD video
If you have the option to control the pixel aspect ratio (not the display aspect ratio), make sure it's set to "1:1" or "1.00," sometimes referred to as "square pixels."
Deinterlacing: Maybe - if you are shooting on an older camera, enable the deinterlacing option. Otherwise, you may get weird-looking horizontal lines in your video. With newer camera models, deinterlacing shouldn't be an issue, so you can leave this option unchecked.
Audio
Codec: AAC (Advanced Audio Codec)
Data rate: 320 kbps
Sample rate: 44.1 kHz
When tying to create the file though the frame size for mp4 though does not seem to give an option for 640x360 on the drop down menu. 640 x 480 seems to make it look stretched? Should I choose 720 x 576 as it originally was?
Also, what should I do with the box 'perform non square pixel rendering?' and how does that relate to the pixel aspect ratio info? And what about the bit about deinterlacing - not sure what that means.
View 14 Replies
View Related
Mar 23, 2012
I've been playing with a free trial of X5 and I'm tempted to buy the full version but I am struggling to get good quality output.
I have a number of clips at 1080p (30fps) and 720p (60fps). These look excellent when played raw from the videocamera files (MP4s), but no matter what output I select from Videostudio they look as if there is a stutter as if played at a lower fps. This effectively renders Videostudio a non-starter as my videos will look worse edited than unedited. Am I missing something, or is this a limitation of the software.
I have a hex core AMD 1050T with 16GB of memory and a GTX560Ti so there should not be a performance problem.
View 11 Replies
View Related
Mar 15, 2011
I have created several chapter markers in the video timeline and when I go to share and create a DVD or blu ray disk I see the chapter markers are reflected in the the create chapter menu which is what I would expect. I don't want to create a whole disk but I want to create a video file like mp4 that includes the chapter markers as part of the video file. I believe that the mp4 format supports chapter markers based on this page [URL]
I can't seem to create a video output file that also includes the chapter markers. Is this possible in video studio x4 or am I forced to create a DVD or blu ray disk with a menu structure in order to preserve the chapters in the resultant output?
View 2 Replies
View Related
Mar 23, 2012
I have upgraded to X5 (15.0.0.258) Windows 7 64-bit QuickTime Player 7.7.1 K-Lite_Codec_Pack_840_Basic.exe
I am using an input file of:
a 30 second .avi file, frame size 1440 x 1080 15 frames/sec
Video compression Microsoft DTV-DVD Video Decoder, 24 bits, total 450 frames
Audio compression PCM 32.000 kHz, 16 bit Mono 960,000 samples.
I was using X3 version [URL].......
If all I do is clip the .avi to a 10 second output (eg .mpg, .mpg, .wmv) with no editing, I get a jerky movie (which appears to be one frame per second).
I have put up a 10 second clip here to show a sample of the jerkiness (which was created using x3) but it is the same jerkiness.
[URL]...........
PS MediiaInfo
General
Complete name : D:2012_03_22 Lorikeets.AVI
Format : AVI
Format/Info : Audio Video Interleave
File size : 25.6 MiB
Duration : 30s 0ms
Overall bit rate : 7 167 Kbps
Video
ID : 0
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L5.0
Format settings, CABAC : Yes
Format settings, ReFrames : 1 frame
Format settings, GOP : M=1, N=15
Codec ID : H264
Duration : 30s 0ms
Bit rate : 6 519 Kbps
Width : 1 440 pixels
Height : 1 080 pixels
Display aspect ratio : 4:3
Frame rate : 15.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.279
Stream size : 23.3 MiB (91%)
Audio
ID : 1
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : 1
Duration : 30s 0ms
Bit rate mode : Constant
Bit rate : 512 Kbps
Channel(s) : 1 channel
Sampling rate : 32.0 KHz
Bit depth : 16 bits
Stream size : 1.83 MiB (7%)
Interleave, duration : 1000 ms (15.00 video frames)
View 14 Replies
View Related
Nov 27, 2011
So to share an iphone 4s video, what are the best output settings, to retain the .mov settings, so that there is the least amount of re-encoding, which presumably will be the fastest?
View 1 Replies
View Related
May 28, 2012
I'm creating video clips in Corel Video Studio X4 Ultimate (Education),for use in creating multimedia PDFs with Adobe Acrobat X Pro.
The formats Adobe Acrobat says is accepts include MPEG 4 / H.264,so in Corel Video Studio X4 I've tried selecting the following types of output file:
1) "MPEG4: iPhone H.264 (640 x 480)" My preferred resolution, but Adobe Acrobat won't accept it, apparently because it's "Sony PSP" (according to an analysis by MediaInfo), not supported by Flash, according to an advisor on the Adobe forums.
2) "MPEG4: iPod H.264" (320 x 240) This is accepted by Adobe Acrobat, even though it's also Sony PSP (according to MediaInfo). But this isn't enough resolution for my purposes.
3) "MPEG4: iPhone 4/iPad HD" This is also accepted by Adobe Acrobat, but the resolution is too high (1280x720) as the files are too large.
View 2 Replies
View Related
Aug 23, 2011
When first making the video in Edit mode, is there any way to see the final output size before or after selecting Create Video File before the file is created.
If I choose Create Disk it will show the output size.
If not what would the maximum running time be for DVD output?
View 10 Replies
View Related
Jun 26, 2013
I've just completed my first project and when I attempt to create a video file for hard disk output I'm unsure what option I should select from the drop down box that gives me the highest quality without re-rendering the video.
My AVCHD 50p original files are according to the file properties in VSP -
PAL HDMV
H.264 Video
24bits, 1920/1080, 16.9
50.000 frames/sec
Variable bit rate (max.26000 kbps)
Dolby Digital Audio
48000 Hz, 5.1 channels 384 kbps
So it looks like I need to select AVCHD 1920x1080 50p however in the properties for that file creation, the video bitrate is max 20000 kbps (my video 24.7) and audio is only 2.0 (my audio 5.1).
I really would like to retain the 5.1 audio and my higher video bitrate.
Also when I view the project properties the video is shown as 1024 x 576.
PAL double (50 fps)
Microsoft AVI files
24 bits, 1024 x 576, 50 fps
Frame-based
Uncompressed
PCM, 48.000 kHz, 16 bits, 5.1 Channels
View 1 Replies
View Related
May 14, 2012
In CS6 when I edit an MP4 (simple trims) and render it, the resulting video is "jerky"?
View 5 Replies
View Related
Apr 11, 2011
I am importing some .avi files and burning to a disc. Most of the .avi clips are fine on the DVD, but two that have panning sequences are very jerky. I checked the source .avi files and they pan smoothly.
I've explored changing the Speed to Quality slider and also the Frame Type (Upper/Lower field first) setting to no avail.
AVI Clip Properties:
File Format: Microsoft AVI files
File Size: 13,513 KB
Frame rate: 23.976 frames/sec
Duration: 62.479 seconds
Data rate: 215.01 kbps
Video
Compression: ffdshow Video Decoder
Attributes: 24 bits, 720x404
Total Frames: 1,498 frame(s)
[code].....
View 9 Replies
View Related
Jun 4, 2012
I just created a project with many different clips. Some of them play perfectly while others are jerky in playback. The original videos were imported to Correl from video files downloaded from the internet. Some of them are MPEG and others are AVI. It seems that the MPEG files play fine while the AVI files are slow. Not sure why this is since I created another very similar project and the AVI files in that project played back fine.
View 2 Replies
View Related
Dec 13, 2012
Not had this before, just put a couple of minutes clip into the timeline ready to edit and when I play through it, the video is jerky/jittery on playback. If I click on it in the library and play it without pulling it in to the timeline, it is fine, and if I click on the video without opening the programme, it also plays fine ? If you watch the timeline scrubber as the video jerks, you can see a trail of little white shadows that the scubber leaves behind as it stutters ? I have tried with other clips and it does exactly the same ! The clip is AVCHD clip, and.... I have let it create a smart proxy file before playing it.
View 13 Replies
View Related
Nov 15, 2010
I am using a trial version of Videostudio Pro X3 and am experiencing some difficulty producing good quality DVD's & video files (via share->Create Video File).
My original video has been captured from an 8mm camcorder and is good quality. The file type is MPEG-2 TS Video & is 2.2GB.
If I import it into the timeline, select Share->Create Video File->Custom and set the video data rate to 8000kps
my resulting mpg file has overall good quality but there are some very jerky movements and pixelation.
These are not present in the original mpeg-2 file. I get a similarly poor result if I select Share->Create Disc which starts up DVD Factory and burn a disc
However, if I have nothing in my timeline and select Share->Create Disc which starts up DVD Factory, add media, selecting my MPEG-2 TS Video file and then burn a disc. The resulting disc is excellent quality with no jerky movements or pixelation.
However, this isn't much use to me because I want to edit my video but seems to prove that something strange is happening in VideoStudio Pro X3 or my use of it.
View 9 Replies
View Related
Jun 7, 2013
basically my 24fps footage isn't rendering smoothly ON X5 Ultimate.
[URL]
What i've done is put the same clip together twice, as strangely the first clip is smooth, then subsequent clips are all jerky. This has been going on for some time, so switched to 25fps. 25fps from my Canon 5D MKII wasn't as good as 24fps, so switched back and decided to try and sort this out.
I have been through multiple settings, deleted all older versions of Corel, removed then re-installed X5, made sure all patches and updates were installed - made no difference.
View 14 Replies
View Related
Jun 4, 2012
I'm wondering if it is normal for my clips to have jerky preview. I am editing 1080p MOV clips and I've made sure that Smart Proxy is enabled and that the files do exist. Smart Proxy settings are default to activate with any clip that is larger than 720X480. After I've dragged a clip onto the timeline I get jerky preview if I select "clip" and then click play. But if I select "project" it plays smoothly. Scrubbing is also smooth. My question is why are my clips so jerky? It seems that "clip" preview is automatically using the original video file and not the proxy. I'm on a slow computer, but that's not the issue because everything except the individual clips plays smoothly. And yes, the Smart Proxy icon is on my clips and it's had plenty of time to complete the proxy creation. I've even completely removed VS with Revo Uninstaller and reinstalled it. No change.
View 6 Replies
View Related
Apr 17, 2012
I've just bought a fluid head tripod and have been practising with it and getting some fairly smooth results. I've been shooting at a resolution of 1920x1080 at 30fps in MPEG4 AVC/H.264. When I watch the video in the LCD display on the video camera or plug my video camera (Sanyo Xacti FH1) into my 40 inch TV the results look smooth. But as soon as I download them onto my computer and watch them in VideoLan or QuickTime, the results are awful. The picture jerks several times a second throughout the panning shots. I have imported some of the clips into VideoStudio Pro X4, and made smart proxies of them and some but not all of them run smoothly but when I create an MP4 HD file in VS4 the results are just once again awfully jerky. My computer is only a couple of months old: AMD Athlon II X4651 Quad Core and Radion HD6700 series graphics card with 4Gb of ROM running Windows 7 Home Premium 64bit. What I can't understand is why the panning looks so smooth on the camera and on my TV (so it isn't due to the small size of the camera's LCD) but as soon as I download it to the computer it looks so awful. I'm aiming to put up some film clips of archaeological sites in Crete on YouTube and I am due to go round the island shooting video but I can't possibly put results like these on the Internet. What could be causing the difference between what my camera shows and what my computer shows?
View 14 Replies
View Related
May 8, 2009
could i get a broadcast video output in Photoshop CS4.I would to check colors on a PAL monitor,
View 1 Replies
View Related
May 1, 2013
We're producing some video to be projected, so to see what the final output will really look like, I'm doing video previews using FireWire so output goes directly to the projector.
It's been working great up until yesterday. Was working fine until I had to restart my Mac. Upon reboot, my the projector no longer gets any video output.
I've tried restarting numerous times, checked all connections, etc. Got it working again after several restarts, but after switching over to Photoshop momentarily, the video output once again disappeared.
how to regain consistent Firewire output for Video Previews?
My setup:
After Effects CS6
Mac Pro
OSX Version 10.7.5
Firewire Output of my Mac's monitor is going to the Firewire Input on my Sony Media Converter
RCA Video out (Composite video) going to the projector's video input.
After Effects Video Preview preferences:
Output Device: FireWire
Output Mode: Apple FireWire NTSC
View 3 Replies
View Related
Aug 14, 2013
I have received a request to convert an Adobe Edge Animate animation output to a video format such as .mov
View 2 Replies
View Related
Feb 13, 2011
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
View 11 Replies
View Related
Feb 24, 2011
I have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
View 5 Replies
View Related
Feb 15, 2011
In creating a video output I am looking for WMV Frame Width 720 Frame Height 480. I have created outputs with WMV HD 720 30p that is 1280 by 720... My issue when I stream that wireless over to my game systems or even my laptop. I am getting lagg. I get no lag on video outputs with WMV 720 by 480. Those video I created with Microsoft MM. I just got VideoStudio and its great! , but my issue I would like to output to WMV 720 by 480 and I do not see that option.
I have been on game forums and wireless forums, and since the WMV 720 by 480 and still working. I am trying to use VS3 to output to that for testing.
My setup is that my game systems and laptop are connected to TV in the house so I stream our events to them for people to see.
WMV HD 720 30p that is 1280 by 720 - is causing the lagg...
WMV 720 by 480 - no lagg...
View 3 Replies
View Related
Apr 15, 2011
I use the VideoStudio Pro X4 to edit my videos.
This time I have some problems with the quality of my finished projects. I have tried to burn my project as both DVD and AVCHD. On DVD the quality was really poor with grainy picture.
The AVCHD disc was much better but there was lots of "strobe" in the movie. Especially where I have added transitions and text fields.
My raw video-files is HD video (MTS-files). I also use the proxy tools to make the editing go smoother. I think my computer should handle this without the Roxy, but it doesn't.
I use this settings for my project: Settings --> Project Properties:
Edit File Format: MPEG
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Lower Field First
(DVD-PAL), 16:9
Create Disc --> AVCHD:
MPEG files
24 bits, 1920 x 1080, 25 fps
Lower Field First
(HDMV-PAL), 16:9
H.264 Video
Video data rate: Variable (Max. 16000 kbps)
LPCM Audio, 48000 Hz, Stereo
Create Disc --> DVD:
MPEG files
24 bits, 720 x 576, 25 fps
Lower Field First
(DVD-PAL), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
View 14 Replies
View Related
Mar 1, 2012
Is it possible to edit a video, and have the output format, frame rate, etc r3epeat the input? So edit scenes etc, but not alter the quality from input.
View 8 Replies
View Related
