VideoStudio :: Pro X3 - Jerky Movements And Pixelation
Nov 15, 2010
I am using a trial version of Videostudio Pro X3 and am experiencing some difficulty producing good quality DVD's & video files (via share->Create Video File).
My original video has been captured from an 8mm camcorder and is good quality. The file type is MPEG-2 TS Video & is 2.2GB.
If I import it into the timeline, select Share->Create Video File->Custom and set the video data rate to 8000kps
my resulting mpg file has overall good quality but there are some very jerky movements and pixelation.
These are not present in the original mpeg-2 file. I get a similarly poor result if I select Share->Create Disc which starts up DVD Factory and burn a disc
However, if I have nothing in my timeline and select Share->Create Disc which starts up DVD Factory, add media, selecting my MPEG-2 TS Video file and then burn a disc. The resulting disc is excellent quality with no jerky movements or pixelation.
However, this isn't much use to me because I want to edit my video but seems to prove that something strange is happening in VideoStudio Pro X3 or my use of it.
View 9 Replies
ADVERTISEMENT
Dec 31, 2012
At first I thought it was a touchpad problem, but I discovered that three different optical mice have the same issue + a 4th optical mouse on a different computer also experiences this issue...
particularly when I am using the free select tool, the mouse movements start to get VERY jerky when I am going around corner after corner when my image is zoomed to 100% or greater on a 2500px or larger image, it lots of times causes me to mess up because it jerks around a lot... no other program has this issue, not even other programs where I need to get into tight corners with a mouse!!! this ONLY happens in Gimp!!! other tools have this jerky mouse movement problem to but is experienced mostly using free select!!! How do I fix this Gimp jerky mouse movement issue??? Gimp seems to be the only program with this issue!!!
View 2 Replies
View Related
Oct 25, 2012
I completed the editing of a multi- camera edit using two tracks. The second cameras footage on the second track was towards the end of the production.
I then proceeded to add the music and sound tracks at the beginning with full ripple editing activated and when doing this I tweaked and removed a few clips to match the music which reduced the production by about 40 seconds in all.
When I got to where the synced clips were, they had moved by about 15 seconds. I had dozens of these from the second camera on the second track that took hours to edit and cut into place. However I managed to move them all in one go by highlighting them all and re-syncing the first one which made all the others fall in line again.
View 4 Replies
View Related
Apr 11, 2011
I am importing some .avi files and burning to a disc. Most of the .avi clips are fine on the DVD, but two that have panning sequences are very jerky. I checked the source .avi files and they pan smoothly.
I've explored changing the Speed to Quality slider and also the Frame Type (Upper/Lower field first) setting to no avail.
AVI Clip Properties:
File Format: Microsoft AVI files
File Size: 13,513 KB
Frame rate: 23.976 frames/sec
Duration: 62.479 seconds
Data rate: 215.01 kbps
Video
Compression: ffdshow Video Decoder
Attributes: 24 bits, 720x404
Total Frames: 1,498 frame(s)
[code].....
View 9 Replies
View Related
Jun 4, 2012
I just created a project with many different clips. Some of them play perfectly while others are jerky in playback. The original videos were imported to Correl from video files downloaded from the internet. Some of them are MPEG and others are AVI. It seems that the MPEG files play fine while the AVI files are slow. Not sure why this is since I created another very similar project and the AVI files in that project played back fine.
View 2 Replies
View Related
Dec 13, 2012
Not had this before, just put a couple of minutes clip into the timeline ready to edit and when I play through it, the video is jerky/jittery on playback. If I click on it in the library and play it without pulling it in to the timeline, it is fine, and if I click on the video without opening the programme, it also plays fine ? If you watch the timeline scrubber as the video jerks, you can see a trail of little white shadows that the scubber leaves behind as it stutters ? I have tried with other clips and it does exactly the same ! The clip is AVCHD clip, and.... I have let it create a smart proxy file before playing it.
View 13 Replies
View Related
Feb 19, 2013
I often have the problem that when I am editing a video in Videostudio Pro X5 the clips often seem jerky.
View 7 Replies
View Related
Nov 14, 2010
Using a Canon Powershot G12 camera and it records 1280x720 px .mov, H.264, 23.976 fps.
Doesn't matter how my project properties are in Videostudio Pro X3. Think I tried almost everything. As soon as I create a video through VS Pro X3 (all update patches installed) the result is a jerky video. Using the recommended (by Corel) version of Quicktime, as the most recent Quicktime version causes VS to crash. Tried this on 3 different computers with the same result.
Project settings:
TV standard: 24 fps
Frame rate 23.976 fps
Frame Type: Frame based
Frame size: 1280x720 px
Compression: Doesn't matter (same result anyway)
Share:
Create Video File:
- Same as project = Jerky video
- Upload to YouTube (MPEG-4 HD 16:9) = Jerky video
- Xvid or any other format = Jerky video
Here is the file on YouTube as it should look (original .mov file from the camera directly uploaded to YouTube): [URL]
Here is the file on YouTube after created with Videostudio Pro X3: [URL]
View 14 Replies
View Related
Jun 7, 2013
basically my 24fps footage isn't rendering smoothly ON X5 Ultimate.
[URL]
What i've done is put the same clip together twice, as strangely the first clip is smooth, then subsequent clips are all jerky. This has been going on for some time, so switched to 25fps. 25fps from my Canon 5D MKII wasn't as good as 24fps, so switched back and decided to try and sort this out.
I have been through multiple settings, deleted all older versions of Corel, removed then re-installed X5, made sure all patches and updates were installed - made no difference.
View 14 Replies
View Related
Jun 4, 2012
I'm wondering if it is normal for my clips to have jerky preview. I am editing 1080p MOV clips and I've made sure that Smart Proxy is enabled and that the files do exist. Smart Proxy settings are default to activate with any clip that is larger than 720X480. After I've dragged a clip onto the timeline I get jerky preview if I select "clip" and then click play. But if I select "project" it plays smoothly. Scrubbing is also smooth. My question is why are my clips so jerky? It seems that "clip" preview is automatically using the original video file and not the proxy. I'm on a slow computer, but that's not the issue because everything except the individual clips plays smoothly. And yes, the Smart Proxy icon is on my clips and it's had plenty of time to complete the proxy creation. I've even completely removed VS with Revo Uninstaller and reinstalled it. No change.
View 6 Replies
View Related
Jun 5, 2012
I have this problem in X4 and also in X5. When I load MP4 files from my HD camcorder I can preview the clips fine. When I drop them into the timeline, and play the project, the clips are mostly pixelated. When I open other projects that I created in X4 last year using the same type type of mp4 files, I see no pixelation in the project preview. All of these mp4 files are using smart proxy.
View 5 Replies
View Related
Aug 24, 2011
I have a number of video files captured at 1080X720 full frame resolution at 29.97 frames/second, shown on my PC as .MOV files.
When watching the original files either on my PC or TV, movement is fluid and smooth.
When watching a finished video created via VideoStudio Pro X4 using the aforementioned files, movement is jerky, and is particularly noticeable when watching a panned scene. The effect is so bad that it makes viewing on a large screen impossible as the picture movement jerks/judders about. I have looked at the project preferences, and notice under Project Option>General tab, the only available frame sizes are the standard ones which only go up to 720X576. The radio button to select a user defined frame size is greyed out and cannot be selected to input my own frame sizes. I’m therefore unable to actually input the frame size of the source video files.
Basically how do I render a finished video without jerky movement?
View 12 Replies
View Related
Apr 17, 2012
I've just bought a fluid head tripod and have been practising with it and getting some fairly smooth results. I've been shooting at a resolution of 1920x1080 at 30fps in MPEG4 AVC/H.264. When I watch the video in the LCD display on the video camera or plug my video camera (Sanyo Xacti FH1) into my 40 inch TV the results look smooth. But as soon as I download them onto my computer and watch them in VideoLan or QuickTime, the results are awful. The picture jerks several times a second throughout the panning shots. I have imported some of the clips into VideoStudio Pro X4, and made smart proxies of them and some but not all of them run smoothly but when I create an MP4 HD file in VS4 the results are just once again awfully jerky. My computer is only a couple of months old: AMD Athlon II X4651 Quad Core and Radion HD6700 series graphics card with 4Gb of ROM running Windows 7 Home Premium 64bit. What I can't understand is why the panning looks so smooth on the camera and on my TV (so it isn't due to the small size of the camera's LCD) but as soon as I download it to the computer it looks so awful. I'm aiming to put up some film clips of archaeological sites in Crete on YouTube and I am due to go round the island shooting video but I can't possibly put results like these on the Internet. What could be causing the difference between what my camera shows and what my computer shows?
View 14 Replies
View Related
Jun 24, 2012
I’ve been using very happily been using x2 for a number of years to make a lot of movies from my standard definition camera, I’ve loved the programme, and it has generally been able to do everything I wanted, and made for an enjoyable editing process. However, the camera has finally given up and I’m now going down the HD route, and the old x2 version just keeps crashing with any new clips. So I have recently downloaded the trial version of x5 (5 days of trial left), with the intention of trying it out and then purchasing it.
Unfortunately however I have found it to be jerky and jumpy when editing clips together, particularly when using the overlay tracks, the more overlays the worse it gets. This happens when I want to watch the edit, and while the sound runs ok the video just freezes on a frame then jumps ahead a few seconds and freezes etc etc. Impossible to watch and edit to really.
I am using the smart proxy to get the files to a manageable size, and I can see the separate proxy files in explorer. Smart proxy enabled. I have all the acceleration on that can go on (the ”Enable Hardware Encoder Acceleration” is greyed out so I can’t tick it). When I share/render the movie it comes out just fine, so it’s only with the editing process that is jumpy. I have really enjoyed x2, and could get good results really quickly, and I enjoyed the editing interface and process with Corel VS, but am now thinking I might need to change to a different video editing programme.
Computer- HP Elitebook 8560w
Everything is just running off the laptop’s hard drive. I’ve installed The CVS x5 Service Pack 1
The project has only two clips – the first from a canon d550 as below
640x480 MOV
24 bits, 1848 frames
25.000 fps
73.92 secs
And the other from the net as below
MPEG-4 file
2890 KB
H 264 High Profile Video
989 frames
24 bits 640x480 4:3
30 fps
605 Kbps data rate
Project Properties
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Upper Field First
(DVD-PAL), 4:3
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
View 2 Replies
View Related
Feb 10, 2006
Nature of the problem: Following the recommended procedure, I get to the phase where you created a video file. However when I go to preview the file, its badly pixelated.
Properties of your source files: All are clips from unprotected DVDs and play fine when captured.
What devices are involved and their mode of connection: Direct from computer's DVD player/recorder.
Project Settings: As listed under recommended procedure.
Output format: Mpeg to be burned to DVD.
PAL or NTSC: NTSC
Error Codes (if any): None
System information: AMD 64 3500+ w/ Dual SLi 7800 GTs and 2 GB of RAM.
I suspect that its a setting somewhere that has been changed because on a prototype I made using some of the same clips it worked fine. Then just stopped and started pixelating out of the blue.
View 9 Replies
View Related
Aug 5, 2009
I am just trying to fix some seems for a texture in Photoshop. I'm using a pretty simple method of a half opacity Clone Stamp brush and just tapping the obvious seams with other parts of the image.
All goes well till about 38 seconds into it the Clone Stamp makes a huge streak in the lower left half of the video. You'll even notice that my cursor didn't go over there.... its similar to drawing lines while holding shift (giving you straight lines) but it happens randomly and not on purpose... any ideas?
View 2 Replies
View Related
Sep 20, 2012
Snap seems to be on even if I turn it off. In CS6 I can arbitrarily create a circle. Then I create a cross shape I want to place in the center of the circle. I can place it near the center but somehow, there are these 'no man's land' unplaceable areas that are small increments but nevertheless there. I have all snaps turned off. Center objects on an axis doesn't work either.
I've tried this with Smart Guides on and off. I have tried placing a horizontal and verticle guide and turned snap to guides on, but still the cross will not allow me to move exactly where I want it.
View 3 Replies
View Related
May 11, 2012
For the second time, which is two times too many, I've found myself browsing through images and noticed they were all starting to change. Essentially I've apparently instigated a sync settings command to too many images and it wasn't immediately noticable when it happened so I couldn't just do a Ctrl-Z to undo it. I want to make sure I'm not missing something that would allow me to sync all selected images back a step in History. I would think this would be an easy enough feature to add to any version of Lightroom (using LR3 for now because I'm waiting for the LR4 I purchased to get an update that might speed it up). I've checked out auto script programs but they're a bit unweildy and frankly Lightroom should have that feature available.
View 4 Replies
View Related
Nov 10, 2010
I have modelling a face in maya 2011. I can see some youtube videos how they put dots in their face, and the 3d-face capture the dots movements. [URL] ....
I want to use dots in my face and a cheap web camera. Does this work in maya 2011? Or do I have to use MotionBuilder? What is the name of the dots?
View 2 Replies
View Related
Sep 27, 2011
Is it possible to combine 2 movements in 1 animation step. i.e can a part rotate and move along its axis at the same time?
I think I have done this before in the presentation environment, but can it be done within the assembly with studio activated?
View 3 Replies
View Related
Apr 7, 2009
It seems difficult to make small on screen movements without the tool jumping. Would it be better use a low DPI mouse or a high DPI one? Wouldn't you get better control with a low DPI one?
View 2 Replies
View Related
Aug 9, 2013
I'm looking at the expanded DTP functionality in XDP9 and have question about resizing columns.
Say I wanted 2 columns that were different widths - I would open up the 'A4 1-Column' template, select the Text tool, right-click inside the column, take the 'Columns...' option, increase Number of columns to 2 then adjust each columns width as desired by dragging the red corner handles. The problem here is that it is very easy to inadvertently alter a columns height because it's very difficulty to move a mouse horizontally without wavering a little bit vertically up or down. Is there a constrainer keyboard key or some other method that ensures vertical movements are ignored?
View 8 Replies
View Related
Mar 4, 2014
So i've got a stroke in a circular path. I use the scissor tool and cut a segment of it out. Now, i want to move one of the end points up and have the anchor points after it follow the movement to keep the smooth line. I think Flash had a tool like this. It allowed you to manipulate one point that would affect the whole path depending on how extreme or what direction you went.
View 1 Replies
View Related
Aug 3, 2012
I downloaded and installed the trial version of Adobe Photoshop CS6 extended to test the correctness of photographs blurred by accidental movements, but can not find the tool or not his name. In Internet video appears in the Filter menu but all I get is my Digimarc.
View 4 Replies
View Related
Dec 31, 2011
If you're interested take a look at the attached video clip.
What you will see is one robot tending two tool changers.
I know the quality was rushed, but you should see that one of the two stands actually has the end effector tooling on it.
My question is how do i define a grip from the robot to that tool, so I can move it to the other riser (as you can tell from the animation).
I am not working in Inventor Studio, otherwise this would be somewhat simple. I am doing this in Dynamic Simulation.
My thought was to create a spacial joint between the robot and the tool. But then how would I control through the timing where its location is?
View 1 Replies
View Related
May 14, 2012
In CS6 when I edit an MP4 (simple trims) and render it, the resulting video is "jerky"?
View 5 Replies
View Related
Feb 22, 2013
I have been playing with mudbox again recently having not used it for some time and noticed my viewport was getting really jerky when tumbling the viewport (this is with the basic mud head SD to around half a million polys). I also noticed the cursor being affected when moving near to the viewcube so I disabled the viewcube and performance returned to normal. I can work without the viewcube but Mud is one application where it is actually very usefol IMHO.
View 6 Replies
View Related
Sep 27, 2011
I am running autocad lt 2011 with the latest windows 7. My mouse is very jerky within paper or model space but especially when I try linear demand or line demand.
I have tried accessing performance tuner but cannot find it, I have reset my hardware accelator to 0. I am not using an aero graphic within windows and am checking my graphics card.
View 9 Replies
View Related
Nov 27, 2012
My pointer gets very jerky whenever I'm using the Layers palette in Photoshop CS6. This is never happened in previous versions (although I skipped CS5).
View 14 Replies
View Related
Jun 12, 2013
Just installed Lightroom 5.In the Library module while panning a zoomed in image the movement is very jerky. This only happens on the second and subsequent images opened. The first image after launching Lightroom is fine.
View 1 Replies
View Related
Feb 20, 2014
After importing my timelapse image sequence and interpreting the footage I am able to render out a 1080p video file that runs nice and smooth. If I try to speed up my footage from lets say 9 seconds to 6 seconds using 'Timestretch', I notice that the rendered video of that 6 second clip is kind of jerky, it's not smooth like the original length movie.
Obviously I'm missing a step in the process or not fully understand how this works. I suspect it's something to do with frame rates.
My composition is 30fps and so is my rendered video file. I use the H.264 compression in both cases.
View 3 Replies
View Related
