After Effects :: Rendered Movies Are Jerky After Timestretch
Feb 20, 2014
After importing my timelapse image sequence and interpreting the footage I am able to render out a 1080p video file that runs nice and smooth. If I try to speed up my footage from lets say 9 seconds to 6 seconds using 'Timestretch', I notice that the rendered video of that 6 second clip is kind of jerky, it's not smooth like the original length movie.
Obviously I'm missing a step in the process or not fully understand how this works. I suspect it's something to do with frame rates.
My composition is 30fps and so is my rendered video file. I use the H.264 compression in both cases.
View 3 Replies
ADVERTISEMENT
Jun 7, 2013
basically my 24fps footage isn't rendering smoothly ON X5 Ultimate.
[URL]
What i've done is put the same clip together twice, as strangely the first clip is smooth, then subsequent clips are all jerky. This has been going on for some time, so switched to 25fps. 25fps from my Canon 5D MKII wasn't as good as 24fps, so switched back and decided to try and sort this out.
I have been through multiple settings, deleted all older versions of Corel, removed then re-installed X5, made sure all patches and updates were installed - made no difference.
View 14 Replies
View Related
Aug 24, 2011
I have a number of video files captured at 1080X720 full frame resolution at 29.97 frames/second, shown on my PC as .MOV files.
When watching the original files either on my PC or TV, movement is fluid and smooth.
When watching a finished video created via VideoStudio Pro X4 using the aforementioned files, movement is jerky, and is particularly noticeable when watching a panned scene. The effect is so bad that it makes viewing on a large screen impossible as the picture movement jerks/judders about. I have looked at the project preferences, and notice under Project Option>General tab, the only available frame sizes are the standard ones which only go up to 720X576. The radio button to select a user defined frame size is greyed out and cannot be selected to input my own frame sizes. I’m therefore unable to actually input the frame size of the source video files.
Basically how do I render a finished video without jerky movement?
View 12 Replies
View Related
Dec 9, 2011
I recently purchased VideoStudio Pro X4. I have been making movies just fine, but now I am wanting to try some new things such as effects. Here are some things I would like to try, but I am not sure if VideoStudio has this capability:
1. Add explosions to movies.
2. Also other effects like lightning coming from fingertips.
3. I have seen in other video clips where people have added a mouth to various inanimate objects such as a wall or fruit or whatever. The object would remain still while the mouth spoke. I am not sure if this is clear or not.
I noticed that some have used Adobe After Effects. Is this what is needed? It seems kind of expensive.
View 1 Replies
View Related
Jan 30, 2014
I am explorng the wonders of cineware and am running into a problem. animated a camera between two points. I animated the position, point of interest and X rotation I dragged a c4d file into the timeline and as expected the axis correlation is all goofy so I thought I would merge the camera data and recalibrate my c4d scene.
I selected "Comp Camera" in the Cineware effect and then clicked "merge" under commands. I made sure that my c4d project was closed while I did this. I then hit command E to open my c4d project. The camera appears but instead of two set of keyframes, there are like 20 and as the timeline plays, the camera jerkes all over the place. there seems to be no rhyme or reason. It moves in the general directio nof the original ae cam animation but the cor. parameters are all over the place. I tries with the some easing interporlation in AE first and then just linear to make the animation translation easier. Same thing happens.
View 1 Replies
View Related
Aug 14, 2013
I'm new to AECS6 and wanted to embed a video into a video. I rendered an AVI(MPEG4) in Key-shot 4 that is only 6 seconds long.When I import (or drag and drop) that file into AE it freezes and then crashes. I am not sure what's going on. I tried importing other AVIs, and they seem to be working just fine!..
Then i tried importing the FLV of the same AVI video I rendered with keyshot, it says my file is damaged or corrupted. but i can playback the FLV file no problem.I am on windows 7 64bit right now, 8GB of ram, Intel i7 at 3.4GHz, NVDIA GeForace GT 640.
View 1 Replies
View Related
Jun 16, 2013
I rendered a file from render queue choosing outpuit module h.264
It all seem to work fine but when i try to play the rendered file error occurs - depending on video player - some player wont play the file one is showing time of video 00:00 but plays it in media player (windows) it is showing 23:40:00 although file is 3:11... simply rendered file is not working -
i am working on dynamic link seq from premiere pro...
soft: AE CS5
View 1 Replies
View Related
May 14, 2012
In CS6 when I edit an MP4 (simple trims) and render it, the resulting video is "jerky"?
View 5 Replies
View Related
Dec 20, 2010
I recently purchased the VX3/PSX3 bundle. So far we love the flexibility and ease of creating a project. We do a lot of transferring, such as 8mm and VHS for family and friends. Our most recent project included five 20 minute reels of 8mm film. The finished project with menus and credits was just about 1 hour 58 minutes with a size of 6.6GB.
We have a a Blu-Ray burner as well as a DL DVD burner so that size should be fine since we were going to just make a DL DVD. I then went to the SHARE tab and selected the "Create a movie" link. I chose the mpg option just out of familiarity. All went well until I noticed that it broke my project into 2 seperate movies (movie.mpg and movie001.mpg). The first was a bit larger than the second, but almost equal in time. I thought maybe I did something wrong and reran it. The second try yielded basically the same result...two movie files, but this time the second was only 9 minutes long while the first was 1 hour 48 mins. I do not want the extra links on the DVD Menu. The cousin that this is going to is NOT very electronics savvy and the extra buttons on the menu may cause a complete mental breakdown. How I can keep this 6.6GB project as one complete file for DVD authoring? I can forward along file info if need be when I get home.
View 14 Replies
View Related
Aug 24, 2012
I want to try a newer version of VS with a Canopus capture device. I want to convert some old VHS movies to DVD. Can this be accomplished with any of the newer VS versions, 11 up to 15? Also, will they work with Vista 32 bit?
View 4 Replies
View Related
Apr 22, 2006
how to make a screenshot of a movie scene?
View 9 Replies
View Related
Mar 8, 2012
I am able to set the GPS locations in mp4 movies in LR4 without any problems. However, if I export these movies now, the tags are no longer shown. The tags are also missing when I re-import them
View 2 Replies
View Related
Mar 21, 2014
I recently re-imported all my photos and movies.
Now all movies are without sound. I dont know what to do or where to error search this. 100 family movies are just silent now o.O
View 1 Replies
View Related
Apr 11, 2011
I am importing some .avi files and burning to a disc. Most of the .avi clips are fine on the DVD, but two that have panning sequences are very jerky. I checked the source .avi files and they pan smoothly.
I've explored changing the Speed to Quality slider and also the Frame Type (Upper/Lower field first) setting to no avail.
AVI Clip Properties:
File Format: Microsoft AVI files
File Size: 13,513 KB
Frame rate: 23.976 frames/sec
Duration: 62.479 seconds
Data rate: 215.01 kbps
Video
Compression: ffdshow Video Decoder
Attributes: 24 bits, 720x404
Total Frames: 1,498 frame(s)
[code].....
View 9 Replies
View Related
Jun 4, 2012
I just created a project with many different clips. Some of them play perfectly while others are jerky in playback. The original videos were imported to Correl from video files downloaded from the internet. Some of them are MPEG and others are AVI. It seems that the MPEG files play fine while the AVI files are slow. Not sure why this is since I created another very similar project and the AVI files in that project played back fine.
View 2 Replies
View Related
Dec 13, 2012
Not had this before, just put a couple of minutes clip into the timeline ready to edit and when I play through it, the video is jerky/jittery on playback. If I click on it in the library and play it without pulling it in to the timeline, it is fine, and if I click on the video without opening the programme, it also plays fine ? If you watch the timeline scrubber as the video jerks, you can see a trail of little white shadows that the scubber leaves behind as it stutters ? I have tried with other clips and it does exactly the same ! The clip is AVCHD clip, and.... I have let it create a smart proxy file before playing it.
View 13 Replies
View Related
Nov 15, 2010
I am using a trial version of Videostudio Pro X3 and am experiencing some difficulty producing good quality DVD's & video files (via share->Create Video File).
My original video has been captured from an 8mm camcorder and is good quality. The file type is MPEG-2 TS Video & is 2.2GB.
If I import it into the timeline, select Share->Create Video File->Custom and set the video data rate to 8000kps
my resulting mpg file has overall good quality but there are some very jerky movements and pixelation.
These are not present in the original mpeg-2 file. I get a similarly poor result if I select Share->Create Disc which starts up DVD Factory and burn a disc
However, if I have nothing in my timeline and select Share->Create Disc which starts up DVD Factory, add media, selecting my MPEG-2 TS Video file and then burn a disc. The resulting disc is excellent quality with no jerky movements or pixelation.
However, this isn't much use to me because I want to edit my video but seems to prove that something strange is happening in VideoStudio Pro X3 or my use of it.
View 9 Replies
View Related
Feb 19, 2013
I often have the problem that when I am editing a video in Videostudio Pro X5 the clips often seem jerky.
View 7 Replies
View Related
Nov 14, 2010
Using a Canon Powershot G12 camera and it records 1280x720 px .mov, H.264, 23.976 fps.
Doesn't matter how my project properties are in Videostudio Pro X3. Think I tried almost everything. As soon as I create a video through VS Pro X3 (all update patches installed) the result is a jerky video. Using the recommended (by Corel) version of Quicktime, as the most recent Quicktime version causes VS to crash. Tried this on 3 different computers with the same result.
Project settings:
TV standard: 24 fps
Frame rate 23.976 fps
Frame Type: Frame based
Frame size: 1280x720 px
Compression: Doesn't matter (same result anyway)
Share:
Create Video File:
- Same as project = Jerky video
- Upload to YouTube (MPEG-4 HD 16:9) = Jerky video
- Xvid or any other format = Jerky video
Here is the file on YouTube as it should look (original .mov file from the camera directly uploaded to YouTube): [URL]
Here is the file on YouTube after created with Videostudio Pro X3: [URL]
View 14 Replies
View Related
Feb 22, 2013
I have been playing with mudbox again recently having not used it for some time and noticed my viewport was getting really jerky when tumbling the viewport (this is with the basic mud head SD to around half a million polys). I also noticed the cursor being affected when moving near to the viewcube so I disabled the viewcube and performance returned to normal. I can work without the viewcube but Mud is one application where it is actually very usefol IMHO.
View 6 Replies
View Related
Sep 27, 2011
I am running autocad lt 2011 with the latest windows 7. My mouse is very jerky within paper or model space but especially when I try linear demand or line demand.
I have tried accessing performance tuner but cannot find it, I have reset my hardware accelator to 0. I am not using an aero graphic within windows and am checking my graphics card.
View 9 Replies
View Related
Jan 25, 2011
I have a created a video using my Sony XE105 handycam in HD and edited it successfully using X2.
I can then export it to WMV format and view the file in superb quality in windows media player. However, when I try to export into FLV format, I get the message about converting and it sits at 0%. I have left it for over a half hour without any movement before deeming it as having "hung" and trying again.
I'd really like to export movies in FLV format rather than WMV?
View 2 Replies
View Related
Feb 13, 2012
I have done all the updates etc that Corel has suggested and I still cannot make a 3D movie. I do all the steps to make it and when I play it back the audio is there but there is either a white or black screen.
View 5 Replies
View Related
Mar 16, 2012
I have VisualStudio Pro X5.I would like to create a DVD that will have 3 movies (Titles). I would like to a have Play All button on the menu page so that when selected the 3 movies will play in sequence without returning to the menu after playing a movie. In addition I would also be able to select each each movie individually from the menu. Control would return to the menu after playing the movie.
View 5 Replies
View Related
Dec 17, 2013
I have a bundle of .mpg movies with unwanted sound included. Can I remove it?
Background: Took a bunch of ancient 8mm movies to a store and had them put on a CD. They came back in sets of .bup, .ifo, and .vob files. VideoStudio Pro X6 inducted them as .mpg files. VS was recently bought in a box; allowed update after installation. How to check the version.
View 1 Replies
View Related
Jan 7, 2013
In the past I created a movie and put it onto a DVD. It was created with another software program called NCH VideoPad, if I recall. It worked fine. I loved the DVD's special effects and various other screen choices from its main menu. It has numerous effects on the initial title screen, and included 3 links at the bottom which allowed users to select different scenes, and more.
Is there someway that VS X5 PRO can do the same thing, but within the video, and not by creating a DVD? I know that description is rather vague, but since I can't show you the DVD movie, I don't know how else to say it.
I wish there was some way to have VS import the DVD movie I created, so that I could use it and modify it.
View 6 Replies
View Related
Mar 26, 2013
I have the following problem,I have to make movie in autocad 2012 for 3D project I have drawn. It's big building and the movie should be for about 1 minute presentation which I have to send to an e-mail (so no more than 10 mb) ,but when I make movie of 60 seconds the size of the file is way too big (about 20 mb). Is there a way to make smaller files or I should use another software? I have tryed all the three formats available in autocad.
View 2 Replies
View Related
Nov 14, 2012
I am trying to use the keywords to mark up some movies. i dont want the histogram panel because i want to see more of the keyword list. although i can close the histogram panel so it is just a bar, i cant completely remove it. i can remove other panels such as the metadata or comments panels. in the same way, i also notice that i cant remove the navigator panel even though i seldom use it.
View 4 Replies
View Related
Nov 27, 2012
My pointer gets very jerky whenever I'm using the Layers palette in Photoshop CS6. This is never happened in previous versions (although I skipped CS5).
View 14 Replies
View Related
Jun 4, 2012
I'm wondering if it is normal for my clips to have jerky preview. I am editing 1080p MOV clips and I've made sure that Smart Proxy is enabled and that the files do exist. Smart Proxy settings are default to activate with any clip that is larger than 720X480. After I've dragged a clip onto the timeline I get jerky preview if I select "clip" and then click play. But if I select "project" it plays smoothly. Scrubbing is also smooth. My question is why are my clips so jerky? It seems that "clip" preview is automatically using the original video file and not the proxy. I'm on a slow computer, but that's not the issue because everything except the individual clips plays smoothly. And yes, the Smart Proxy icon is on my clips and it's had plenty of time to complete the proxy creation. I've even completely removed VS with Revo Uninstaller and reinstalled it. No change.
View 6 Replies
View Related
Jun 12, 2013
Just installed Lightroom 5.In the Library module while panning a zoomed in image the movement is very jerky. This only happens on the second and subsequent images opened. The first image after launching Lightroom is fine.
View 1 Replies
View Related
