Mudbox :: Viewcube Causes Jerky Viewport?
Feb 22, 2013
I have been playing with mudbox again recently having not used it for some time and noticed my viewport was getting really jerky when tumbling the viewport (this is with the basic mud head SD to around half a million polys). I also noticed the cursor being affected when moving near to the viewcube so I disabled the viewcube and performance returned to normal. I can work without the viewcube but Mud is one application where it is actually very usefol IMHO.
View 6 Replies
ADVERTISEMENT
Nov 21, 2013
I'm new to Mudbox. How to unlock or unfreeze the Viewcube? Along with the shortcut?
View 3 Replies
View Related
May 13, 2013
Sometime the ViewCube disappear from my screen, so it is not possible to rotate my drawing so see my objects in 3D.
The same ViewCube is in my Viewport and in this case I would like to make it disappear due the Viewport is locked and the commands do not operate normally here in this area.
Just in case you do not know what is the ViewCube please check the images attached.
View 5 Replies
View Related
Oct 14, 2012
I am sculpting a bust and want to use Projection Stamp image to paint the diffuse map. However, the image is not showing in the viewport.
My model has 6 levels with 6+ million polygons. At none of the levels the image shows in viewport.
I'm using Nvidia GTX 560 Ti, 1G
Windows 7 Pro 64bits.
cpu i7 860, 2.8 ghz
16 GB rams.
However, when I start with the mudbox standard base head mesh, then choosing Stencil image, the image shows in the viewport. But not with my 6+ million bust and the image is On it's not hidden.
Is there anyway I can optimize Mudbox to display the image in viewport?
View 2 Replies
View Related
Mar 6, 2014
Is there way to assign keyboard shortcut to do same thing as holding left mouse button over the ViewCube and movng mouse? E.g. hold Ctrl + MMB (middle mouse button) and move mouse.
Reason i dont like Alt + MMB or Ctrl + R (orbit view mode) is because it rotates view around the center of viewport, cube does same when no object selected, when object selected cube rotates view around that object!
Its such a time waste to look at cube then move mouse to it aim exactly at cube ... with keyboard modifier all needed to do it to hold button.
View 2 Replies
View Related
Sep 27, 2012
I've got a strange problem with my ViewCube. My screen is showing the world ordinate system as it should in the standard plan view ( X horizontal,Y vertical); however, my ViewCube is skewed to the right about 30° (top view and rotated about 30° right). It is set to orient to the current UCS and the current UCS Is World. If I use the ViewCube to change the setting and orient it as top view orthogonal (north straight up) my view (UCS World) gets twisted left by about (not exactly) 30°.Am I missing something or is this abnormal ViewCube behavior?
Windows 7 Professional 64-bit - Service Pack 1
Intel﴾R﴿ Core﴾TM﴿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2013, sp1
View 5 Replies
View Related
Sep 28, 2012
i have a problem with 3DS Max 2011. When I open it up, an error appears that says:
"XAML Parse Error: Error parsing Xaml file: root element is missing."
I then proceed to click 'ok'. Another dialog box appears saying:
"Reset Ribbon? The main Ribbon configuration file is probably corrupt. Reset to factory defaults?"
I click 'Yes', and 3DS Max starts up without any noticeable problems. However, when I open my project and attempt to place bones into my model, the bones do not place properly (it seems that they are being placed along a random axis and they are stretched out. Not only this, but upon placing a bone, the ViewCube stops working. It is still present on screen, but i cannot interact with it.
View 1 Replies
View Related
May 22, 2011
when using the ViewCube to rotate the camera around and get a different view, it seems to either have a mind of its own or centered on 0,0,0. I've been working on a project for awhile and when I'm editing and have something selected the camera rotates like it should but doesn't focus on what I have selected and sometimes it does. Does this camera rotate and move around the complete center(x:0, y:0, z:0) or am I missing something? I haven't seen anything posted about it so it may just be me but it is frustrating when you are working on a project and have to pan the camera around, zoom out if need be and find the spot you are working currently almost every time.
View 1 Replies
View Related
Feb 6, 2013
I'm used to work with an ortographic wireframe view and a perspective shaded view (from other 3d app), I've tried to reproduce this in Max, without much success, the problem is switching between the ortographic views, the hotkeys doesn't work properly (the camera never displays what I want after switching) and the ViewCube seems somewhat better, however, when switching views using the ViewCube, sometimes it just doesn't align perfectly with the view so the grid doesn't appear, and I need the grid on the ortho viewport.My install is fully updated. I would like to know if it's possible to make it work properly, if possible with hotkeys. I've already tried to disable the animation, it seems to work a bit, but when I switch to the back view, this bug always pops in.
View 1 Replies
View Related
May 14, 2012
In CS6 when I edit an MP4 (simple trims) and render it, the resulting video is "jerky"?
View 5 Replies
View Related
Apr 3, 2013
An associate on campus asked me if there was a way to print the viewcube and compass when he plots a drawing. What he is doing is printing pdf's of different sections of the drawing, and wanting the compass to appear on each printed section.
View 4 Replies
View Related
Dec 30, 2013
I'd like to know if there are shortcuts for select views of the ViewCube. For example if I press alt+t I see the top view. This for all views of the cube. I also use Blender3d, it has shortcuts for views and it's very useful.
View 9 Replies
View Related
Feb 26, 2011
when i add a visual style to a shape or object it asks for, Command: Specify opposite corner:
i cannot move the viewcube and i cannot edit this object.
View 9 Replies
View Related
Jul 30, 2012
I set my template dwg UCS to world. The viewcube will straighten up, i.e. North points up on the screen. I save the template, start a new drawing using the template and my viewcube rotates every time. I have to reset the UCS to world. What would cause this?
View 2 Replies
View Related
Jan 1, 2010
My view cube disappeared on me a few days ago and not like its a big deal now when i turn on the edges it shows the triangles in the mesh. So heres the real problem idk how to turn of the triangulation? view? and when i go to views/viewcube or steering wheel the roll out is empty. so i went to the + sign in the viewport and hit configure viewcube checked the box hit ok and nothing happened. could the file for the view cube and wheel somehow have been deleted?
View 3 Replies
View Related
Oct 16, 2012
I just got a newer computer and loaded autocad2012. If I use the viewcube to rotate to a front view and try to draw or dimension it only will draw on the "top" or XY coordinates while the screen is showing the xz. If I use the view tool bar and switch to the front view I can draw at will on the "front" and the ucs is showing I am drawing on the xy. How do I get the ucs to follow the view with the view cube like it does with the tool bar?
Now, I have checked the ucs settings ucsortho (1) ucsvp (1) ucsfollow (1) What else am I missing?
If I change view with the viewcube, then type ucs v. It will change the ucs to match the view. Why isn't it doing it automatically?
View 3 Replies
View Related
Apr 11, 2011
I am importing some .avi files and burning to a disc. Most of the .avi clips are fine on the DVD, but two that have panning sequences are very jerky. I checked the source .avi files and they pan smoothly.
I've explored changing the Speed to Quality slider and also the Frame Type (Upper/Lower field first) setting to no avail.
AVI Clip Properties:
File Format: Microsoft AVI files
File Size: 13,513 KB
Frame rate: 23.976 frames/sec
Duration: 62.479 seconds
Data rate: 215.01 kbps
Video
Compression: ffdshow Video Decoder
Attributes: 24 bits, 720x404
Total Frames: 1,498 frame(s)
[code].....
View 9 Replies
View Related
Jun 4, 2012
I just created a project with many different clips. Some of them play perfectly while others are jerky in playback. The original videos were imported to Correl from video files downloaded from the internet. Some of them are MPEG and others are AVI. It seems that the MPEG files play fine while the AVI files are slow. Not sure why this is since I created another very similar project and the AVI files in that project played back fine.
View 2 Replies
View Related
Dec 13, 2012
Not had this before, just put a couple of minutes clip into the timeline ready to edit and when I play through it, the video is jerky/jittery on playback. If I click on it in the library and play it without pulling it in to the timeline, it is fine, and if I click on the video without opening the programme, it also plays fine ? If you watch the timeline scrubber as the video jerks, you can see a trail of little white shadows that the scubber leaves behind as it stutters ? I have tried with other clips and it does exactly the same ! The clip is AVCHD clip, and.... I have let it create a smart proxy file before playing it.
View 13 Replies
View Related
Nov 15, 2010
I am using a trial version of Videostudio Pro X3 and am experiencing some difficulty producing good quality DVD's & video files (via share->Create Video File).
My original video has been captured from an 8mm camcorder and is good quality. The file type is MPEG-2 TS Video & is 2.2GB.
If I import it into the timeline, select Share->Create Video File->Custom and set the video data rate to 8000kps
my resulting mpg file has overall good quality but there are some very jerky movements and pixelation.
These are not present in the original mpeg-2 file. I get a similarly poor result if I select Share->Create Disc which starts up DVD Factory and burn a disc
However, if I have nothing in my timeline and select Share->Create Disc which starts up DVD Factory, add media, selecting my MPEG-2 TS Video file and then burn a disc. The resulting disc is excellent quality with no jerky movements or pixelation.
However, this isn't much use to me because I want to edit my video but seems to prove that something strange is happening in VideoStudio Pro X3 or my use of it.
View 9 Replies
View Related
Feb 19, 2013
I often have the problem that when I am editing a video in Videostudio Pro X5 the clips often seem jerky.
View 7 Replies
View Related
Nov 14, 2010
Using a Canon Powershot G12 camera and it records 1280x720 px .mov, H.264, 23.976 fps.
Doesn't matter how my project properties are in Videostudio Pro X3. Think I tried almost everything. As soon as I create a video through VS Pro X3 (all update patches installed) the result is a jerky video. Using the recommended (by Corel) version of Quicktime, as the most recent Quicktime version causes VS to crash. Tried this on 3 different computers with the same result.
Project settings:
TV standard: 24 fps
Frame rate 23.976 fps
Frame Type: Frame based
Frame size: 1280x720 px
Compression: Doesn't matter (same result anyway)
Share:
Create Video File:
- Same as project = Jerky video
- Upload to YouTube (MPEG-4 HD 16:9) = Jerky video
- Xvid or any other format = Jerky video
Here is the file on YouTube as it should look (original .mov file from the camera directly uploaded to YouTube): [URL]
Here is the file on YouTube after created with Videostudio Pro X3: [URL]
View 14 Replies
View Related
Sep 27, 2011
I am running autocad lt 2011 with the latest windows 7. My mouse is very jerky within paper or model space but especially when I try linear demand or line demand.
I have tried accessing performance tuner but cannot find it, I have reset my hardware accelator to 0. I am not using an aero graphic within windows and am checking my graphics card.
View 9 Replies
View Related
Jan 4, 2013
I am working in C3D 2013 creating a new "clean" template and continue to have the problem of the view cube east and west getting flipped. I've had this problem occasionally in the past and by editing the GEOGRAPHICLOCATION seemed to solve this. Generally I noticed the "z" coordinate setting would flip from a "+" to a "-" thus causing the "e" & "w" swap. My problem is that this is no longer a permanent fix. Every time I open the dwg I am have to edit the GEOGRAPHICLOCATION.
I know I could just turn off the view cube and pretend I never saw this issue but I'm worried this may cause other problems when it comes to coordinates and survey data.
Infrastructure Design Suite 2014
Civil 3D 2013 sp2
Windows 7 x 64, 16 GB
Intel Xeon @ 2.80 GHz
NVIDIA Quadro K2000
View 5 Replies
View Related
Jan 29, 2013
I often get a crash after using the ViewCube tool to pick front view while in top view (today I was in tilemode 1, in a fairly simple 3D drawing).
View 3 Replies
View Related
Feb 27, 2012
We still do all of our AutoCAD drafting in 2-D.So we don't need the ViewCube.It gets in the way and won't let us select objects underneath the ViewCube.
It is easy to turn it off by going to User Interface.BUT, is there a way to turn it off as the default.The drawing I'm in right now has the ViewCube in half of the Viewports.
View 2 Replies
View Related
Jul 9, 2013
Can't figure out where to find the viewcube to rotate 2d model space in 2014 LT.
View 3 Replies
View Related
Nov 27, 2012
My pointer gets very jerky whenever I'm using the Layers palette in Photoshop CS6. This is never happened in previous versions (although I skipped CS5).
View 14 Replies
View Related
Jun 7, 2013
basically my 24fps footage isn't rendering smoothly ON X5 Ultimate.
[URL]
What i've done is put the same clip together twice, as strangely the first clip is smooth, then subsequent clips are all jerky. This has been going on for some time, so switched to 25fps. 25fps from my Canon 5D MKII wasn't as good as 24fps, so switched back and decided to try and sort this out.
I have been through multiple settings, deleted all older versions of Corel, removed then re-installed X5, made sure all patches and updates were installed - made no difference.
View 14 Replies
View Related
Jun 4, 2012
I'm wondering if it is normal for my clips to have jerky preview. I am editing 1080p MOV clips and I've made sure that Smart Proxy is enabled and that the files do exist. Smart Proxy settings are default to activate with any clip that is larger than 720X480. After I've dragged a clip onto the timeline I get jerky preview if I select "clip" and then click play. But if I select "project" it plays smoothly. Scrubbing is also smooth. My question is why are my clips so jerky? It seems that "clip" preview is automatically using the original video file and not the proxy. I'm on a slow computer, but that's not the issue because everything except the individual clips plays smoothly. And yes, the Smart Proxy icon is on my clips and it's had plenty of time to complete the proxy creation. I've even completely removed VS with Revo Uninstaller and reinstalled it. No change.
View 6 Replies
View Related
Jun 12, 2013
Just installed Lightroom 5.In the Library module while panning a zoomed in image the movement is very jerky. This only happens on the second and subsequent images opened. The first image after launching Lightroom is fine.
View 1 Replies
View Related
