Mudbox :: How To Unlock / Unfreeze Viewcube
Nov 21, 2013I'm new to Mudbox. How to unlock or unfreeze the Viewcube? Along with the shortcut?
View 3 Replies
ADVERTISEMENT
Mudbox :: Viewcube Causes Jerky Viewport?
Feb 22, 2013I have been playing with mudbox again recently having not used it for some time and noticed my viewport was getting really jerky when tumbling the viewport (this is with the basic mud head SD to around half a million polys). I also noticed the cursor being affected when moving near to the viewcube so I disabled the viewcube and performance returned to normal. I can work without the viewcube but Mud is one application where it is actually very usefol IMHO.
View 6 Replies View RelatedAutoCad :: LT 2006 - Can't Unfreeze A Layer
Jan 26, 2011Im using Autocad LT 2006.
im having wired situation where all the geometry are appear in Layout mode but not in Model mode. i've tried to zoom extents but nothing.
there were lots of layers that been frozen, i unfroze them and they all appear , but again only in the Layout mode.
in the Model mode, i can see that all layers are tagged as frozen, but i cant unfreeze them.
i guess if i can unfreeze them i can see them in the Model mode.
AutoCad :: Freeze / Unfreeze Layer In Whole Sheet Set At Once
May 14, 2012I am working a lot with layers and since i am also working with sheet sets, it would be very nice to be able to freeze/unfreeze layers for the whole sheet set. Right now i need to freeze / unfreeze layers separately for each page which takes me a quite long time.
View 1 Replies View Related3ds Max :: ViewCube Keyboard Shortcut?
Mar 6, 2014Is there way to assign keyboard shortcut to do same thing as holding left mouse button over the ViewCube and movng mouse? E.g. hold Ctrl + MMB (middle mouse button) and move mouse.
Reason i dont like Alt + MMB or Ctrl + R (orbit view mode) is because it rotates view around the center of viewport, cube does same when no object selected, when object selected cube rotates view around that object!
Its such a time waste to look at cube then move mouse to it aim exactly at cube ... with keyboard modifier all needed to do it to hold button.
AutoCAD Civil 3D :: ViewCube Skewed From WCS?
Sep 27, 2012I've got a strange problem with my ViewCube. My screen is showing the world ordinate system as it should in the standard plan view ( X horizontal,Y vertical); however, my ViewCube is skewed to the right about 30° (top view and rotated about 30° right). It is set to orient to the current UCS and the current UCS Is World. If I use the ViewCube to change the setting and orient it as top view orthogonal (north straight up) my view (UCS World) gets twisted left by about (not exactly) 30°.Am I missing something or is this abnormal ViewCube behavior?
Windows 7 Professional 64-bit - Service Pack 1
Intel﴾R﴿ Core﴾TM﴿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2013, sp1
3ds Max :: Bone Placement Is Bugging The ViewCube?
Sep 28, 2012i have a problem with 3DS Max 2011. When I open it up, an error appears that says:
"XAML Parse Error: Error parsing Xaml file: root element is missing."
I then proceed to click 'ok'. Another dialog box appears saying:
"Reset Ribbon? The main Ribbon configuration file is probably corrupt. Reset to factory defaults?"
I click 'Yes', and 3DS Max starts up without any noticeable problems. However, when I open my project and attempt to place bones into my model, the bones do not place properly (it seems that they are being placed along a random axis and they are stretched out. Not only this, but upon placing a bone, the ViewCube stops working. It is still present on screen, but i cannot interact with it.
3ds Max :: ViewCube To Rotate Camera Around And Get Different View
May 22, 2011when using the ViewCube to rotate the camera around and get a different view, it seems to either have a mind of its own or centered on 0,0,0. I've been working on a project for awhile and when I'm editing and have something selected the camera rotates like it should but doesn't focus on what I have selected and sometimes it does. Does this camera rotate and move around the complete center(x:0, y:0, z:0) or am I missing something? I haven't seen anything posted about it so it may just be me but it is frustrating when you are working on a project and have to pan the camera around, zoom out if need be and find the spot you are working currently almost every time.
View 1 Replies View Related3ds Max :: ViewCube Doesn't Work Properly
Feb 6, 2013I'm used to work with an ortographic wireframe view and a perspective shaded view (from other 3d app), I've tried to reproduce this in Max, without much success, the problem is switching between the ortographic views, the hotkeys doesn't work properly (the camera never displays what I want after switching) and the ViewCube seems somewhat better, however, when switching views using the ViewCube, sometimes it just doesn't align perfectly with the view so the grid doesn't appear, and I need the grid on the ortho viewport.My install is fully updated. I would like to know if it's possible to make it work properly, if possible with hotkeys. I've already tried to disable the animation, it seems to work a bit, but when I switch to the back view, this bug always pops in.
View 1 Replies View RelatedAutoCAD 2013 :: Plotting Viewcube And Compass?
Apr 3, 2013An associate on campus asked me if there was a way to print the viewcube and compass when he plots a drawing. What he is doing is printing pdf's of different sections of the drawing, and wanting the compass to appear on each printed section.
View 4 Replies View RelatedAutoCAD Inventor :: Keyboard Shortcuts For ViewCube?
Dec 30, 2013I'd like to know if there are shortcuts for select views of the ViewCube. For example if I press alt+t I see the top view. This for all views of the cube. I also use Blender3d, it has shortcuts for views and it's very useful.
View 9 Replies View RelatedAutoCad 3D :: Visual Styles / Cannot Move Viewcube
Feb 26, 2011when i add a visual style to a shape or object it asks for, Command: Specify opposite corner:
i cannot move the viewcube and i cannot edit this object.
AutoCAD Civil 3D :: Viewcube And UCS In Template Drawing
Jul 30, 2012I set my template dwg UCS to world. The viewcube will straighten up, i.e. North points up on the screen. I save the template, start a new drawing using the template and my viewcube rotates every time. I have to reset the UCS to world. What would cause this?
View 2 Replies View Related3ds Max Modeling :: Missing Viewcube And Steering Wheel
Jan 1, 2010My view cube disappeared on me a few days ago and not like its a big deal now when i turn on the edges it shows the triangles in the mesh. So heres the real problem idk how to turn of the triangulation? view? and when i go to views/viewcube or steering wheel the roll out is empty. so i went to the + sign in the viewport and hit configure viewcube checked the box hit ok and nothing happened. could the file for the view cube and wheel somehow have been deleted?
View 3 Replies View RelatedAutoCAD 2010 :: UCS Doesn't Seem To Follow Viewcube?
Oct 16, 2012I just got a newer computer and loaded autocad2012. If I use the viewcube to rotate to a front view and try to draw or dimension it only will draw on the "top" or XY coordinates while the screen is showing the xz. If I use the view tool bar and switch to the front view I can draw at will on the "front" and the ucs is showing I am drawing on the xy. How do I get the ucs to follow the view with the view cube like it does with the tool bar?
Now, I have checked the ucs settings ucsortho (1) ucsvp (1) ucsfollow (1) What else am I missing?
If I change view with the viewcube, then type ucs v. It will change the ucs to match the view. Why isn't it doing it automatically?
AutoCAD Civil 3D :: East And West Reversed On Viewcube
Jan 4, 2013I am working in C3D 2013 creating a new "clean" template and continue to have the problem of the view cube east and west getting flipped. I've had this problem occasionally in the past and by editing the GEOGRAPHICLOCATION seemed to solve this. Generally I noticed the "z" coordinate setting would flip from a "+" to a "-" thus causing the "e" & "w" swap. My problem is that this is no longer a permanent fix. Every time I open the dwg I am have to edit the GEOGRAPHICLOCATION.
I know I could just turn off the view cube and pretend I never saw this issue but I'm worried this may cause other problems when it comes to coordinates and survey data.
Infrastructure Design Suite 2014
Civil 3D 2013 sp2
Windows 7 x 64, 16 GB
Intel Xeon @ 2.80 GHz
NVIDIA Quadro K2000
AutoCAD Civil 3D :: Using ViewCube Tool Leads To Crash
Jan 29, 2013I often get a crash after using the ViewCube tool to pick front view while in top view (today I was in tilemode 1, in a fairly simple 3D drawing).
View 3 Replies View RelatedAutoCAD 2010 :: Won't Allow To Select Objects Underneath ViewCube
Feb 27, 2012We still do all of our AutoCAD drafting in 2-D.So we don't need the ViewCube.It gets in the way and won't let us select objects underneath the ViewCube.
It is easy to turn it off by going to User Interface.BUT, is there a way to turn it off as the default.The drawing I'm in right now has the ViewCube in half of the Viewports.
AutoCAD 2013 :: Viewcube Appearance / Disappearance In Viewport
May 13, 2013Sometime the ViewCube disappear from my screen, so it is not possible to rotate my drawing so see my objects in 3D.
The same ViewCube is in my Viewport and in this case I would like to make it disappear due the Viewport is locked and the commands do not operate normally here in this area.
Just in case you do not know what is the ViewCube please check the images attached.
AutoCAD LT :: Find Viewcube To Rotate 2D Model Space
Jul 9, 2013Can't figure out where to find the viewcube to rotate 2d model space in 2014 LT.
View 3 Replies View RelatedAutoCAD 2010 :: How To Get Crosshairs And Viewcube To Be Parallel With Command Ribbon
Mar 19, 2013In a drawing, the directions aren't pointing at a 90-degree angle with relation to the command ribbon above it. It's rotated a little clockwise, as are the crosshairs. How do I get the crosshairs and viewcube to be parallel with the command ribbon? I don't need to rotate any objects in the drawing, but I think this is messing up what I see in my viewports in the layouts.
View 9 Replies View RelatedAutoCAD 2013 :: Viewcube Turning Into Unselectable Image - Opened AutoTrack
May 6, 2012I'm using ACAD 2013, and for the first time since I installed it a month or so ago, I opened AutoTrack (by mistake). Now whenever I double click an AutoCAD file, it will automatically open in in AutoTrack, unless I open AutoCAD and open the file that way. It may be a coincidence, but my viewcube has just stopped working, and has become a static, unselectable image - like a fuzzy stamp on my drawing. I can't click or right click on it, and when I zoom, it doesn't stay in the same place at the same size, like it's supposed to.
This was happening when I was using 2012 too, but stopped after I installed 2013. As I said, it has just started up again after I opened AutoTrack by mistake.
AutoCAD 2013 :: Viewcube Rolling - Zoom To Extents After View Change Box
Jun 13, 2013I am having a small but annoying problem with the viewcube in AutoCAD 2014. In all the previous versions that had the viewcube, when I unchecked the "Zoom to Extents after view change" box, the view would pivot about the center of the screen. Now it seems to pivot about an arbitrary point an I have to zoom_e anyway.
View 8 Replies View RelatedPhotoshop :: How To Unlock A Layer
Nov 25, 2013Windows 8 64bit - Ps C i have an image from a client and it's just one Layer but it's locked and i would like to be able to unlock it and also to add a new layer above it which i am also unable to do.
why this is?
i know i can re-save it so that i can add a new Layer at least but i am still curious as to why i can't unlock the Layer.
also, i am building a package of images to sell. I have Locked the Layers but still want the people that (hopefully) buy them to be able to unlock them -
is this not something i can do? must i leave all Layers unlocked? for the most part i have only done so to keep particular aspects of the images safe from being altered by new users of photoshop etc.
Photoshop :: How To Unlock Folders
Jul 7, 2013How can I unlock my folders so I can copy them and work on them in a separate file? I did "get info" and clicked on the lock on bottom right below sharing and permissions. Then I typed my password, but they revert to locked right away.
I have 100 images to retouch and don't want to retype my password for each one. This happened once before. I don't want it ever.
My computer is not shared, so there's no need.
Photoshop :: Can't Unlock File?
Jun 30, 2013unlock his .png file?creator locked it somehow and just the normal double click on the layer produces nothing.
View 1 Replies View RelatedPhotoshop :: Unlock Layer
Mar 9, 2008In Photoshop 7 how do you unlock the background layer?
View 23 Replies View RelatedPhotoshop :: How To Unlock Filters
Sep 9, 2005PHOTOSHOP 8.
i'm trying make a web page for my dart club,(problem is not in programming) and i found some cool tutorial how to make a cool design for web page in photoshop.
i'm doing verything exactly how is desribed in tutorial but i need to do some DISTORSION filter.
Problem is that just few filters is highlighted for using (blur, noise, sharpen, stylize)
How can i unlock other filters?
Photoshop :: Unlock A Layer
Jul 15, 2004I have a .psd button that has a lot of drop shadow and other affects on it. Somehow this layer has become locked.
There is the little padlock beside the layer name with the popup "Indicates layer is partially locked."
I need to change the text and color of the button, but I can't. Is there anyway to unlock the layer so I don't have to try to create a whole new one? The Lock: menu at the top of the layers tab is all greyed out (inactive).
Photoshop :: Lock/Unlock
Feb 15, 2007I have a PSD with a layer that is locked.
I cannot find in the manual how to unlock the layer.
Photoshop :: How To Unlock Picture?
Jun 11, 2009ive uploaded a picture i want to edit and its locked help me unlock it so i can edit itphotoshop cs3
View 3 Replies View Related