PHOTOSHOP 8.
i'm trying make a web page for my dart club,(problem is not in programming) and i found some cool tutorial how to make a cool design for web page in photoshop.
i'm doing verything exactly how is desribed in tutorial but i need to do some DISTORSION filter.
Problem is that just few filters is highlighted for using (blur, noise, sharpen, stylize)
How can i unlock other filters?
I have hardly ever used filters for any of my work as I have preferred using Xara's native tools and effects to get what I wanted. But recently, I was inspired by some animation work which used backgrounds painted in Photoshop. They used a lot of textures which enhanced the look of the animation and so I thought I'd try to simulate it within Xara.
It works very well and I can export it as a PSD retaining the layers and Alpha channel. But here come my questions.
1. How can I remove the two Alien Skin demo plugins as I already have the full versions.
2. Why don't the native Photoshop plugins--Artistic, Sketch, etc.--seem to work?
In CS3 you could change something to make all filters act like smart filters, even though they won't. I found this worked very well, now I have CS4 and would like to do the same but can't remember what to do to make it work.
View 6 Replies View RelatedI just downloaded a bunch of filters and I dragged them into the filters directory under plugins, but when I open photoshop, none of the filters are there.
View 4 Replies View RelatedI downloaded and installed GIMP 2.8.8 in Windows XP. The Filters menu option shows only Repeat last, Re-show last and Reset all filters.Nothing else in there. Where are the filters?
View 1 Replies View RelatedI am working on a dormitory project and need to provide a required light and ventilation schedule. I have figured out how to create a schedule for each level, but I want to isolate only the Dormitories and the Kitchenette (weed out all the other rooms such as corridor, elevator, storage, toilets, showers, stairs, trash, electrical, etc.).
Â
I tried using seclusion filters, but there are too many items to exclude and cannot fit them all into the 4 filter categories.  I am trying to just get the rooms that begin with 'D' and 'K'. I tried providing the variable 'Begins With' for D and in the next line 'Begins With' K, but then nothing shows up.
Â
Is there a way to provide information to the filter that would allow it to show only rooms beginning with D AND K? I cannot seem to get it to work. I have been playing around with separation values within one filter category (i.e. 'Begins With' D, K) but apparently you cannot add multiple variables within one of the filter items.
Windows 8 64bit - Ps C i have an image from a client and it's just one Layer but it's locked and i would like to be able to unlock it and also to add a new layer above it which i am also unable to do.
Â
why this is?
Â
i know i can re-save it so that i can add a new Layer at least but i am still curious as to why i can't unlock the Layer.
Â
also, i am building a package of images to sell. I have Locked the Layers but still want the people that (hopefully) buy them to be able to unlock them -
Â
is this not something i can do? must i leave all Layers unlocked? for the most part i have only done so to keep particular aspects of the images safe from being altered by new users of photoshop etc.
How can I unlock my folders so I can copy them and work on them in a separate file? I did "get info" and clicked on the lock on bottom right below sharing and permissions. Then I typed my password, but they revert to locked right away.
Â
I have 100 images to retouch and don't want to retype my password for each one. This happened once before. I don't want it ever.
My computer is not shared, so there's no need.
unlock his .png file?creator locked it somehow and just the normal double click on the layer produces nothing.
View 1 Replies View RelatedIn Photoshop 7 how do you unlock the background layer?
View 23 Replies View RelatedI have a .psd button that has a lot of drop shadow and other affects on it. Somehow this layer has become locked.
There is the little padlock beside the layer name with the popup "Indicates layer is partially locked."
I need to change the text and color of the button, but I can't. Is there anyway to unlock the layer so I don't have to try to create a whole new one? The Lock: menu at the top of the layers tab is all greyed out (inactive).
I have a PSD with a layer that is locked.
I cannot find in the manual how to unlock the layer.
ive uploaded a picture i want to edit and its locked help me unlock it so i can edit itphotoshop cs3
View 3 Replies View Relatedon these various templates you can buy on the web, that allow you to put in your own text, links and so forth, with the so-called.PSD files... how on earth, once you open it up in Adobe photoshop, do you take out their text and type yours in!
View 8 Replies View RelatedI created a picture by using Photoshop CS, there are several layers I made, I saved it as tif file, but when I open it , there is no layer in the pictures. it shows a locked background. how to unlock the tif files?
I am trying to move a layer from one photo to another, both photos are from digital saved as JPEG. I selected the photo from which I want to move layers to activate itThen I selected the move tool ( icon - with arrow and cross picture)When I go to select and move the layer from the active photo - it says ' cannot execute because the layer is locked' How do I unlock the layer ?I did not alter the image or made any changes to it when I saved it, I did not even lock any layers I looked in the 'Layers' menue and there are no options for unlock Can someone tell me the pathway to unlock ?
View 9 Replies View RelatedSomehow my pixel dimensions and document dimensions have become locked and when I try to crop an image the cropped dimensions remain in the same proportions of width to height as the original. There are little symbols and brackets to the right of both pixels and inches. I don't know how to remove these. I am using an antiquated version of Photoshop Elements - version 2.0 on a Mac running 10.4.11.
View 6 Replies View Relatedone layer in a photoshop document has a padlock on it; no clue how it got there. I can't make it go away; perhaps the method is different in CS6 than in previous versions...
Â
Any clue about this? I can't fill a selection on this particular layer...don't know why. The layer in question IS selected, and the selection is active, etc.
How do I unlock a CS6 extended layer?
View 2 Replies View RelatedHow do I unlock the background layer?
View 7 Replies View RelatedI am familiar with art explosion. Anyway, I recently had someone design a logo and I wanted to edit a few things on it. My problem is I downloaded that free trial of photoshop cs5 and the logo is showing up on one layer. I've tried everything to get it ungrouped or unlocked. Every tutorial just mentions unlocking the background but doesn't say anything if you have multiple objects in one layer. It has three oval shapes and the words for the business on it and another image. I'm hoping to ungroup it all but I've tried to do that and I am not able to choose ungroup or unlock because it won't let you. What are the steps for someone who doesn't really know this program to get all of the components of the logo separated. The guy apparently designed it in photoshop so I would think it would be a no brainer and I'm surprised I'm having to struggle this much to get it undone. It's a psd file.
View 2 Replies View Relatedi need to unlock this index layer..with this layer locked iam unable to glide it over to another psd file..
View 2 Replies View RelatedI installed CS3 a few days ago (though I'm an experienced CS2 and Photoshop 6 user) and opened Photoshop CS3 Extended today for the first time.
The problem I'm having is with unlocking the background layer. I read in the documentation and on the Net about double-clicking and renaming the layer (which is what I did in other versions), or creating a new file with a transparent background, but those things aren't working for me in this version.
I opened a tiff file (a logo I want to use as the basis for a new image) but I can't unlock the background layer so I can copy, manipulate or add to it. Everything on the Layers drop-down menu is grayed out, as are the word Lock: and the symbols following it in the Layers window.
I tried creating a new image but when File|New dialog box opens the option to use transparent in the Background Contents dropdown is grayed out, too.
I have been sent a template that contains 4 fully locked layers. I seem unable to unlock them to enable me to edit them. Can someone advise how to do this in cs3.
View 8 Replies View RelatedIs there any way to unlock elements 10 plus features?
View 1 Replies View RelatedShake reduction otherwise works well, but the "unlock preview" button under the loupe view causes the filter to completely freeze up and then I often have to reboot.
View 5 Replies View RelatedWhen creating the first new layer via copy in Ph6, it is always locked to the background layer. A small but inconvenient feature.
View 6 Replies View RelatedI have a ribbon that I'm trying to copy onto my page and it is a png file. I've copied papers that are jpgs just fine. Once I copy the png ribbon it locks and I cannot move it around. How do I either unlock it or is there a way to see where I am placing it on my project?
View 1 Replies View RelatedI cannot unlock a background in layers, nor did I ever ask it to lock. The next step is a small fire.
View 5 Replies View RelatedI was on a tight deadline. I got a massively layered, -- nested folders everything --Â .psd. I'm using Photoshop CS 5.5
Â
I only needed the visible layers. So, I go to "Delete Hidden Layers" right? Ooops it was grayed out, I could not use it -- that was because of the locked layers...
Â
Then I realized -- in the complicated layer structure I had to go through every single folder, open it, look for a locked layer and unlock it (nested folders inside of nested folders etc.). If the layer was not visible and it was locked, I had to first turn it to visible, then unlock it, and then turn it off again.
Â
I was on a deadline, and I just didn't have time -- but I had to do it anyway. This was a painful experience... I'm telling designers from now on NEVER SEND ME A PSD WITH LOCKED LAYERS AGAIN
Â
It would have been so much easier if I could just search for "locked layers", and "unlock all."
all my images are locked. cant unlock them. all choices are dimmed.
View 1 Replies View Related