AutoCAD LT :: Find Viewcube To Rotate 2D Model Space
Jul 9, 2013Can't figure out where to find the viewcube to rotate 2d model space in 2014 LT.
View 3 Replies
ADVERTISEMENT
AutoCAD 2010 :: Rotate 3D Model In Model Space?
Apr 13, 2012Basically I've got a detail specific to my design, I've extruded all of the layers up to their desired levels etc, but now I want to be able to rotate it all so that instead of these layers being orientated vertically, they are orientated horizontally, if that makes sense. I understand that there is something involved with the UCS but I'm not sure how to get this to work. This may be an issue with my computer as I know my laptop graphics card is pretty rubbish and impacts a lot of 3d programs such as Rhino and SketchUp so this could be the issue here
View 2 Replies View RelatedAutoCad :: Rotate View In Model Space?
Mar 22, 2012Is there an easy way to rotate my drawing 90 degrees clockwise in model space, but leave it in it's orginal view in paper space. The reason is for drawing elevations - north, south, east, west from construction lines pulled from a plan. I've tried using UCS and was able to rotate, but it won't let me copy objects after doing
View 7 Replies View RelatedAutoCAD Civil 3D :: How To Rotate Model Space View
Apr 30, 2012There was a "rotate view" command in the old Eagle point software. How to do that in Civil 3D?
View 3 Replies View RelatedAutoCad :: Rotate Model Space ONLY In Active Viewport?
Jul 10, 2012MEP 2013
Are there any commands other than DVIEW that allow you to rotate your model space ONLY in the active viewport?
AutoCad :: Rotate Drawing View In Model And Paper Space?
Mar 28, 2012how can i rotate a drawing view in model space and paper space? UCS -> new -> 3 point -> and saving the view works, but trying to figure out how to do this with paper space now. My purpose if for pulling construction lines from plans, for elevations. In the past I simply rotated the drawing, but if i had a layer turned off it would mess up their positioning.
View 1 Replies View Related3ds Max :: ViewCube To Rotate Camera Around And Get Different View
May 22, 2011when using the ViewCube to rotate the camera around and get a different view, it seems to either have a mind of its own or centered on 0,0,0. I've been working on a project for awhile and when I'm editing and have something selected the camera rotates like it should but doesn't focus on what I have selected and sometimes it does. Does this camera rotate and move around the complete center(x:0, y:0, z:0) or am I missing something? I haven't seen anything posted about it so it may just be me but it is frustrating when you are working on a project and have to pan the camera around, zoom out if need be and find the spot you are working currently almost every time.
View 1 Replies View RelatedAutoCAD 2010 :: Changing Between Model Space To Paper Space Locks Application
Apr 12, 2013In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
AutoCAD 2013 :: Toggle From Paper Space Into Same Zoomed Area Within Model Space
Oct 5, 2013Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies View RelatedAutoCAD Civil 3D :: Dynamic Blocks Showing In Model Space But NOT In Paper Space
Mar 22, 2012I am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies View RelatedAutoCAD 2013 :: Transfer Model Space Drawing Into Paper Space?
Feb 15, 2013how do I transfer model space drawing into paper space ?
View 2 Replies View RelatedAutoCAD Dynamic Blocks :: X Y Coordinates From Model Space On Paper Space?
Nov 5, 2013I'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
AutoCAD LT :: Model Space Hatch Hiding Paper Space Multileader
Dec 10, 2012I'm running ACAD LT 2013.
I have a solid hatch that is in model space (actually in an xref in model space). When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden. As if it was a layering or object arrangement issue.
AutoCAD Architecture :: Copy Objects From Model Space To Paper Space?
May 19, 2011is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies View RelatedAutoCAD 2013 :: Switch Object From Model Space To Paper Space
Oct 12, 2012I feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
View 2 Replies View RelatedAutoCAD Architecture :: Dimensions Show On Model Space Not On Work Space
Apr 5, 2013Im working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
View 2 Replies View RelatedAutoCAD 2013 :: Paper Space Viewports - Wipeouts In Model Space
Jul 13, 2012I have several viewports rotated in paper space. When i set them to let say 1:100 scale go to paper space and then click into viewport it comes back to zoom extends of model space and i have to set it all up again and rotate it.
Second problem is that I've created wipeout in model space when i go to layout (paper space) ti looks just how i want it.
When I go to preview or plot it doesn't recognise any wipeouts?
AutoCAD Map 3D :: How To Get From Paper Space To Model Space While Converting Scale Properly
Feb 8, 2012I need to have users plot to DWF from paper space so they can retain their customized layers colors etc, on that specific paper space tab, as well as the view via viewport that they like most.
I then am mixing this with FDO data generated out of Model space. Unfortunately, when using the EXPORTLAYOUT command, the data is coped into Model space but seems to retain it's paper space coordinates. I had hoped this function would behave like CHSPACE and copy everything from paper to model space in the same scale.
Is there a way for me to achieve this?
AutoCad :: Text Doesn't View In Same Model Space / Paper Space
Aug 24, 2012ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
AutoCad :: Referencing Title Block From Model Space Into New Tab Of Paper Space
Jul 11, 2011I just started a new job and am struggling to set everything up the way my old company had AutoCad configured. My old company actually had people that were involved in writing the code for AutoCad on the payroll, so hopefully what I'm looking for isn't some intense computer programming issue.
In short, I am trying to be able to create a generic title block in model space, and reference that title block into paper space of a new drawing without having to create a new tab or anything first. A new paper space tab is automatically created upon attaching the new title block. My old company had its own custom menu bar with lots of custom commands, so the work flow would go something like this: "Old company name" in menu bar -> "Insert" -> "Title Blocks" -> "24x36 title block" (or whatever size we wanted to use obv). Once the desired title block size was selected, a new tab would be created in paper space with the title block as an xref, and a copy of the generic title block was saved to the main folder containing drawings of the project, and could be edited with the specific project info from there.
Is there a semi-easy way to do this, or is this a coding issue that a non-programmer such as myself might have some difficulty doing?
AutoCad 2D :: Bring Paper Space Object Through Viewport Into Model Space
Jan 5, 2009What is the command to take a paper space object and send it through the viewport into model space (without copy and paste)?
View 8 Replies View RelatedAutoCad :: Copy Text From Paper Space And Paste Into Model Space
May 2, 2013I am relatively new to A.C. 2010 and have a recurring issue with copy and paste. Currently all I am trying to do is copy text from paper space into model space and it wont let me.
View 5 Replies View RelatedAutoCad :: Locking Out Model Space While Editing Text In Paper Space
Oct 24, 2012I use x-ref's inserted in model space and label in paper space - always.
I would like to see a way of locking out model space while editing text in paper space. Unless you double click right on the text, you often end up in Model Space...I know - big deal right? It can become annoying or a big deal when a deadline is looming - when is one never? Also big fan of locking viewports.
AutoCad :: Objects Are Yellow In Model Space And White On Paper Space?
Apr 4, 2012how it works?, the objects are yellow in model space and white on paper space??
View 6 Replies View RelatedAutoCAD 2013 :: Importing Paper Space Layout And Model Space Objects From Dwt Into A New Drawing
Oct 4, 2013I'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
View 9 Replies View RelatedAutoCad :: Can't Click Outside Paper Space To Move View Control Toolbar To Model Space
Jun 29, 2013CAD-Newbie working in paper space zoomed in close. I want to return to page extents but am zoomed in so close I can't click outside paper space to move view control toolbar to model space. is there a simple key command to perform this function?
View 9 Replies View RelatedAutoCad :: Changing Of Units In Model Space Does Not Affect Length Of Line In Paper Space
Dec 26, 2012Wile using acad2011...
In model space I set the units form my dwg (cm), draw a line (100units). Next i go to paper space, create a viewport. When the viewport scale is set to 1:1 the ploted line is 100mm in length (not 100cm). Why is this so? How should I correct this? Changing of units in model space does not effect the length of the line in paper space.
AutoCAD 2010 :: Fields In Model Space To Paper Space?
May 2, 2012determine if Fields can be used in model space inside a block and show up in the paper space view as a correct number, (say for a detail number)? I have all of my detail blocks in model space and would like to place fields in the title blocks of the details so that they would show the paper space sheet number that they are being shown on in paper space. I have done some experimenting and cannot seem to get it to work. Or will this just not work?
1.- Details in model space are blocks, and I want to edit the block and insert a field into the detail callout.
2.- I want to have the model space detail read the paper space drawing number, and have the fields change to the proper sheet number.
3.- The result will be the that the model space block fields have changed to the proper detail sheet number shown on the paper space border.
AutoCAD 2010 :: Model Space / Paper Space Display
Mar 15, 2012I have a drawing that has several Paper Space tabs, and each tab has one or more viewports.
When I open the drawing, I can see all the information in Paper Space mode, and I can access the Model Space through the viewports, using the MS command. When I switch to Model Space, nothing is displayed.
AutoCad :: LTSCALE - Model Space / Paper Space Differences
Jul 26, 2005How to set up all LTSCALE/PSLTSCALE/CELTSCALE to suit my needs. I have a bunch of lines in my drawing that are set to the HIDDEN linetype. In model space, they show up as a continuous line. In paperspace, they show up dashed. Using LTSCALE, I tweaked the scale of the lines in PAPER space, but couldn't get those changes to effect model space.
How can I see the same scale in both MS and PS? Another problem is that some of my viewports display the hidden lines in one scale, and others in another scale, and others yet don't display as hidden at all.
How to set up all of the LTSCALE's and what not .
AutoCAD Architecture :: Paper Space And Model Space Tabs?
Feb 27, 2012Somehow the two tabs which were located at the bottom of the screen in my version of Autocad 2008 have dissapeared. I used them extensively and would like to get them back. I've tried the solutions provided in previous answers without success. The menus which are supposed to appear don't.
View 4 Replies View Related