AutoCAD Civil 3D :: East And West Reversed On Viewcube
Jan 4, 2013
I am working in C3D 2013 creating a new "clean" template and continue to have the problem of the view cube east and west getting flipped. I've had this problem occasionally in the past and by editing the GEOGRAPHICLOCATION seemed to solve this. Generally I noticed the "z" coordinate setting would flip from a "+" to a "-" thus causing the "e" & "w" swap. My problem is that this is no longer a permanent fix. Every time I open the dwg I am have to edit the GEOGRAPHICLOCATION.
I know I could just turn off the view cube and pretend I never saw this issue but I'm worried this may cause other problems when it comes to coordinates and survey data.
Infrastructure Design Suite 2014
Civil 3D 2013 sp2
Windows 7 x 64, 16 GB
Intel Xeon @ 2.80 GHz
NVIDIA Quadro K2000
View 5 Replies
ADVERTISEMENT
Apr 6, 2010
I would like to display East and West coordinates at certain points ( like circle center lines etc.). how can i do this so that the display is accurate and readable?
View 4 Replies
View Related
Apr 17, 2013
I am currently working on a project and i created a land plot and set each level line to the proper elevation but not all of the level lines appear in every view. In the North view all of the level lines and the walls i have created appear, but the walls don't show up in any of the other views. Also the North, West, and South views show all of the level lines but the East view does not.
View 1 Replies
View Related
Sep 27, 2012
I've got a strange problem with my ViewCube. My screen is showing the world ordinate system as it should in the standard plan view ( X horizontal,Y vertical); however, my ViewCube is skewed to the right about 30° (top view and rotated about 30° right). It is set to orient to the current UCS and the current UCS Is World. If I use the ViewCube to change the setting and orient it as top view orthogonal (north straight up) my view (UCS World) gets twisted left by about (not exactly) 30°.Am I missing something or is this abnormal ViewCube behavior?
Windows 7 Professional 64-bit - Service Pack 1
Intel﴾R﴿ Core﴾TM﴿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2013, sp1
View 5 Replies
View Related
Jul 30, 2012
I set my template dwg UCS to world. The viewcube will straighten up, i.e. North points up on the screen. I save the template, start a new drawing using the template and my viewcube rotates every time. I have to reset the UCS to world. What would cause this?
View 2 Replies
View Related
Jan 29, 2013
I often get a crash after using the ViewCube tool to pick front view while in top view (today I was in tilemode 1, in a fairly simple 3D drawing).
View 3 Replies
View Related
Jul 12, 2005
where I can find a good tutorial on how to do one?
View 1 Replies
View Related
Sep 24, 2007
how to make these kind of shades as in this cover of Kanye West's single "Can't tell me nothing". It has a asian vibe to it and I really like the shadows or shades in the letters, and they seem like a somewhat easy task to accomplish in Photoshop,
View 1 Replies
View Related
May 30, 2012
The level lines appear in the east elevation but not the building. The elevation marker tab is blank, unlike the N,W,and S tab.
View 1 Replies
View Related
Oct 16, 2012
I just loaded AutoCAD 2013.... when I printed out a drawing which included a picture .bmp file format, only the picture comes out completely black. It's looks like the raster images printed were reversed. It appear as a negative image.
View 1 Replies
View Related
Dec 23, 2012
I'm drawing ref lines in south view and thats no problem, and works fine, but when I change to East view, the problems start to increase, once I draw a ref line, the line is not visible, and I get a "warning" that says: "None of the created elements are visible in Elevation: East View. You may want to check the active view, its Parameters, and Visibility settings."
What's that all about? I can't seem to get the line to show no matter what I do.
View 4 Replies
View Related
May 17, 2004
Two of my elevation markers (North and East) have disappeared. The actual elevations are still visible and fully functional, but their tags have disappeared. "Elevations" is turned on in the View Properties dialog, but only 2 tags appear.
How to get them back?
View 6 Replies
View Related
Oct 19, 2012
I inherited a computer at work where the pan function scrolls the drawing left when I move the mouse right. Where is the option to change it back to normal?
View 6 Replies
View Related
Mar 14, 2012
I have a part which I am using the Split tool to make two solid parts. All was fine until a few days later when I went back and made some changes to the surface I was using for the Split. Now, Inventor has flipped the two solid bodies, so later features I had placed now don't work.
View 9 Replies
View Related
Apr 3, 2013
An associate on campus asked me if there was a way to print the viewcube and compass when he plots a drawing. What he is doing is printing pdf's of different sections of the drawing, and wanting the compass to appear on each printed section.
View 4 Replies
View Related
Dec 30, 2013
I'd like to know if there are shortcuts for select views of the ViewCube. For example if I press alt+t I see the top view. This for all views of the cube. I also use Blender3d, it has shortcuts for views and it's very useful.
View 9 Replies
View Related
Feb 26, 2011
when i add a visual style to a shape or object it asks for, Command: Specify opposite corner:
i cannot move the viewcube and i cannot edit this object.
View 9 Replies
View Related
Oct 16, 2012
I just got a newer computer and loaded autocad2012. If I use the viewcube to rotate to a front view and try to draw or dimension it only will draw on the "top" or XY coordinates while the screen is showing the xz. If I use the view tool bar and switch to the front view I can draw at will on the "front" and the ucs is showing I am drawing on the xy. How do I get the ucs to follow the view with the view cube like it does with the tool bar?
Now, I have checked the ucs settings ucsortho (1) ucsvp (1) ucsfollow (1) What else am I missing?
If I change view with the viewcube, then type ucs v. It will change the ucs to match the view. Why isn't it doing it automatically?
View 3 Replies
View Related
Feb 27, 2012
We still do all of our AutoCAD drafting in 2-D.So we don't need the ViewCube.It gets in the way and won't let us select objects underneath the ViewCube.
It is easy to turn it off by going to User Interface.BUT, is there a way to turn it off as the default.The drawing I'm in right now has the ViewCube in half of the Viewports.
View 2 Replies
View Related
May 13, 2013
Sometime the ViewCube disappear from my screen, so it is not possible to rotate my drawing so see my objects in 3D.
The same ViewCube is in my Viewport and in this case I would like to make it disappear due the Viewport is locked and the commands do not operate normally here in this area.
Just in case you do not know what is the ViewCube please check the images attached.
View 5 Replies
View Related
Jul 9, 2013
Can't figure out where to find the viewcube to rotate 2d model space in 2014 LT.
View 3 Replies
View Related
Mar 19, 2013
In a drawing, the directions aren't pointing at a 90-degree angle with relation to the command ribbon above it. It's rotated a little clockwise, as are the crosshairs. How do I get the crosshairs and viewcube to be parallel with the command ribbon? I don't need to rotate any objects in the drawing, but I think this is messing up what I see in my viewports in the layouts.
View 9 Replies
View Related
May 6, 2012
I'm using ACAD 2013, and for the first time since I installed it a month or so ago, I opened AutoTrack (by mistake). Now whenever I double click an AutoCAD file, it will automatically open in in AutoTrack, unless I open AutoCAD and open the file that way. It may be a coincidence, but my viewcube has just stopped working, and has become a static, unselectable image - like a fuzzy stamp on my drawing. I can't click or right click on it, and when I zoom, it doesn't stay in the same place at the same size, like it's supposed to.
This was happening when I was using 2012 too, but stopped after I installed 2013. As I said, it has just started up again after I opened AutoTrack by mistake.
View 3 Replies
View Related
Jun 13, 2013
I am having a small but annoying problem with the viewcube in AutoCAD 2014. In all the previous versions that had the viewcube, when I unchecked the "Zoom to Extents after view change" box, the view would pivot about the center of the screen. Now it seems to pivot about an arbitrary point an I have to zoom_e anyway.
View 8 Replies
View Related
Nov 10, 2011
I was wondering why Batang and Arial were appearing in the Fonts under Document Properties when I had not actively used them in my "New" document.
When I looked at the Default text files, I believe I see the reason. I find Batang listed as the default Asian Text font for both Artistic and Paragragh Text. The options for Asian Text don't seem to include any fonts that I have on the old machines.
Similarly, the Middle East Default Text style would seem to generate the Arial(Arabic) entry in the required fonts.
Is there a way to completely eliminate the default Asian Text and Middle East entries from the default text styles?
View 1 Replies
View Related
Sep 11, 2013
I have PS 5.5. All of a sudden, when I create a path, it's reversed out!
View 2 Replies
View Related
Aug 30, 2006
I use the pentool to make a square and hit the fill path with forground color, it fills the outside of the square not the inside..sure I can select/ inverse but..how do i set it to fill the inside again?
View 1 Replies
View Related
Oct 19, 2013
I have Photoshop Middle Eastern Version CS5. When I type Arabic the letters are typed backward.
As you know arabic is typed from right to left, but in photoshop they are typed from left to right.
Everything is fine when typing on another program like notepad or MS word, but in photoshop letters are reversed,
Windows -> Character: I chose Adobe Arabic
Windows -> Paragraph is set to right align text and justification is set to arabic, eventhough arabic letter are typed backward and are not connected.
I have windows 7
View 2 Replies
View Related
Dec 4, 2013
How can I add a reversed reflection to an object in elements 10?
View 1 Replies
View Related
Jan 17, 2014
This has been a problem ever since LR3 and on previous versions of the MacOS. I hoped that it would be fixed in LR5, but not yet. When I select multiple images for email in LR5 on a Mac running Mavericks, the preview shows the images in the correct order, but in the email message itself, the order is reversed so that the last image is first and the first image is last. Nothing works. If you select the images in a different order, the result is the same backwards order. Lightroom – How Do You Change the Order of Images, Before Renaming?
The only workaround is to create a separate export for each image or to export a folder of images and manually add them to a single email.
In addition, it would be useful if there were a space between images in the email so that the images don't all run together in one long strip. There should be a way to have this happen by setting up a style or template so that it does not have to be done manually.
View 4 Replies
View Related
Mar 6, 2014
Is there way to assign keyboard shortcut to do same thing as holding left mouse button over the ViewCube and movng mouse? E.g. hold Ctrl + MMB (middle mouse button) and move mouse.
Reason i dont like Alt + MMB or Ctrl + R (orbit view mode) is because it rotates view around the center of viewport, cube does same when no object selected, when object selected cube rotates view around that object!
Its such a time waste to look at cube then move mouse to it aim exactly at cube ... with keyboard modifier all needed to do it to hold button.
View 2 Replies
View Related
