I downloaded and installed the trial version of Adobe Photoshop CS6 extended to test the correctness of photographs blurred by accidental movements, but can not find the tool or not his name. In Internet video appears in the Filter menu but all I get is my Digimarc.
View 4 Replies
It seems difficult to make small on screen movements without the tool jumping. Would it be better use a low DPI mouse or a high DPI one? Wouldn't you get better control with a low DPI one?
View 2 Replies View RelatedAt first I thought it was a touchpad problem, but I discovered that three different optical mice have the same issue + a 4th optical mouse on a different computer also experiences this issue...
particularly when I am using the free select tool, the mouse movements start to get VERY jerky when I am going around corner after corner when my image is zoomed to 100% or greater on a 2500px or larger image, it lots of times causes me to mess up because it jerks around a lot... no other program has this issue, not even other programs where I need to get into tight corners with a mouse!!! this ONLY happens in Gimp!!! other tools have this jerky mouse movement problem to but is experienced mostly using free select!!! How do I fix this Gimp jerky mouse movement issue??? Gimp seems to be the only program with this issue!!!
Im trying to draw frames with feathered corners using strokes, its supposed to be a solid black line 2px thick it works sometimes but not others. What I end up with is a blurred edge, almost like it's using a spray which is not at all what I want, have tried changing various settings but its still the same.
View 7 Replies View RelatedI'm new at this and trying to remove arm hair from this image using the smudge tool (30%, normal), it worked except the arm looks too blured now. How do I bring back some texture ?
View 6 Replies View RelatedI am new to photoshop. Sometimes I accidently close the layers tab. How do you get it back?
View 2 Replies View RelatedOk, so somehow I really screwed the pooch and reformatted the HD with all my 2012 and 2013 lightroom photos.I still have my main library file and 2014 photos as they are on a different drive.
Now, I think I can go back and recover all the images which is great. But they will not have their original names or folder structure.So I'm not sure how to handle this situation with my library. I don't mind if I lose all my edits on those photos, but I want to have a clean library and nothing unlinked.
Whats the best way to get my libarary back into good shape after I have my recovered files?
I cannot get the clone tool to work on my Photoshop CS5 Extended v 12.0 x 32, which is running on my work Lenovo laptop. I am using the tool correctly, it just no longer replaces any pixels with the clone stamp.
View 3 Replies View RelatedI am using OS X 10.8.2, ATI Radeon 4670, CS6 Extended 13.0.1 When I select and place the red eye tool over the eye and click, the black dot appears on the lip or off to the right. Is there some setting I need to make? It has always worked correctly in the past.
View 2 Replies View RelatedDoes the trial version provide full 3d tool capabilities? Before downloading over 800 MB and using even more space for installation, it would be great to know! :P
(I am only intererested in upgrading from CS3 for the ability to paint 3d models).
I searched Adobe's site extensively to see if the trial has "full" features or limitations, but it mentions neither.
On my previous version of PS, I had full control over the Crop tool. I could control the width and length of the cropping area I chose.
I now have a new version, CS5 Extended, but the Crop tool only works in an "automatic" way. The tool itself selects the box shape, which is never the shape I want. How I can rectify this?
I am just trying to fix some seems for a texture in Photoshop. I'm using a pretty simple method of a half opacity Clone Stamp brush and just tapping the obvious seams with other parts of the image.
All goes well till about 38 seconds into it the Clone Stamp makes a huge streak in the lower left half of the video. You'll even notice that my cursor didn't go over there.... its similar to drawing lines while holding shift (giving you straight lines) but it happens randomly and not on purpose... any ideas?
Can the image be saved with the annotations of the measure tool in PS Extended?
View 1 Replies View RelatedI have NO idea how I managed to do this, but if I copy a piece from a file, the rectangular changes from square to sort of roundish.
And when I do copy and paste (control C - Control V), the edges of the copied piece in the new file are transparant. Which is exactly what I do NOT want! How can I change this back to the normal way of copying?
I have a layer which is white with a clouds render but when I want to go the next step I cannot access the twirl tool or the zig zag tool. I notice this is the only filter I cannot access.why or what I should do to be able to access it for my project.
View 2 Replies View RelatedI have created a custom measurement tool to measure distances (captured from sattelite imagery, and using the distance key as the guide) and it works great. However, I would like to be able to use the same tool to measure curves/radiuses. Say for instance a mountain road. I know the scale of the photo, and can measure any straight (line) angle, but can I do the same for a curve or radius using the same scale?
View 6 Replies View RelatedI completed the editing of a multi- camera edit using two tracks. The second cameras footage on the second track was towards the end of the production.
I then proceeded to add the music and sound tracks at the beginning with full ripple editing activated and when doing this I tweaked and removed a few clips to match the music which reduced the production by about 40 seconds in all.
When I got to where the synced clips were, they had moved by about 15 seconds. I had dozens of these from the second camera on the second track that took hours to edit and cut into place. However I managed to move them all in one go by highlighting them all and re-syncing the first one which made all the others fall in line again.
I am using a trial version of Videostudio Pro X3 and am experiencing some difficulty producing good quality DVD's & video files (via share->Create Video File).
My original video has been captured from an 8mm camcorder and is good quality. The file type is MPEG-2 TS Video & is 2.2GB.
If I import it into the timeline, select Share->Create Video File->Custom and set the video data rate to 8000kps
my resulting mpg file has overall good quality but there are some very jerky movements and pixelation.
These are not present in the original mpeg-2 file. I get a similarly poor result if I select Share->Create Disc which starts up DVD Factory and burn a disc
However, if I have nothing in my timeline and select Share->Create Disc which starts up DVD Factory, add media, selecting my MPEG-2 TS Video file and then burn a disc. The resulting disc is excellent quality with no jerky movements or pixelation.
However, this isn't much use to me because I want to edit my video but seems to prove that something strange is happening in VideoStudio Pro X3 or my use of it.
Snap seems to be on even if I turn it off. In CS6 I can arbitrarily create a circle. Then I create a cross shape I want to place in the center of the circle. I can place it near the center but somehow, there are these 'no man's land' unplaceable areas that are small increments but nevertheless there. I have all snaps turned off. Center objects on an axis doesn't work either.
I've tried this with Smart Guides on and off. I have tried placing a horizontal and verticle guide and turned snap to guides on, but still the cross will not allow me to move exactly where I want it.
For the second time, which is two times too many, I've found myself browsing through images and noticed they were all starting to change. Essentially I've apparently instigated a sync settings command to too many images and it wasn't immediately noticable when it happened so I couldn't just do a Ctrl-Z to undo it. I want to make sure I'm not missing something that would allow me to sync all selected images back a step in History. I would think this would be an easy enough feature to add to any version of Lightroom (using LR3 for now because I'm waiting for the LR4 I purchased to get an update that might speed it up). I've checked out auto script programs but they're a bit unweildy and frankly Lightroom should have that feature available.
View 4 Replies View RelatedCurrently I am running PhotoShop extended CS5, 64bit. in which i have my fovorite plugins (Topaz, Nik and OneOne) running perfectly.
I have upgraded to Adobe Creative Cloud and installed PhotoShop extended CS6 using Adobe Application Manager as recommended. It didn't ask me if I wanted to upgrade or do a new install for PhotoShop. So now I CS6 running with no Plug-ins. I need my plugins! LOL.
I tried pointing to additional plugins in the CS6 preference to the CS5 plugin folder. Upon Launch it gave me a whole slew of error messages saying something cant load or launch C+ runtime error or what not. It does open up, but it only gives access to Nik and Topaz. OnOne doesn't show up under filters or extensions.
So, what are my options?
Just copy the plugins from CS5 to CS6?
I dont't want to reinstall all the plugins to CS6 if I don't have to as I've auto updated them over time to current versions online, so only have installation files for my original purchases.
I have modelling a face in maya 2011. I can see some youtube videos how they put dots in their face, and the 3d-face capture the dots movements. [URL] ....
I want to use dots in my face and a cheap web camera. Does this work in maya 2011? Or do I have to use MotionBuilder? What is the name of the dots?
Is it possible to combine 2 movements in 1 animation step. i.e can a part rotate and move along its axis at the same time?
I think I have done this before in the presentation environment, but can it be done within the assembly with studio activated?
I'm looking at the expanded DTP functionality in XDP9 and have question about resizing columns.
Say I wanted 2 columns that were different widths - I would open up the 'A4 1-Column' template, select the Text tool, right-click inside the column, take the 'Columns...' option, increase Number of columns to 2 then adjust each columns width as desired by dragging the red corner handles. The problem here is that it is very easy to inadvertently alter a columns height because it's very difficulty to move a mouse horizontally without wavering a little bit vertically up or down. Is there a constrainer keyboard key or some other method that ensures vertical movements are ignored?
So i've got a stroke in a circular path. I use the scissor tool and cut a segment of it out. Now, i want to move one of the end points up and have the anchor points after it follow the movement to keep the smooth line. I think Flash had a tool like this. It allowed you to manipulate one point that would affect the whole path depending on how extreme or what direction you went.
View 1 Replies View RelatedIf you're interested take a look at the attached video clip.
What you will see is one robot tending two tool changers.
I know the quality was rushed, but you should see that one of the two stands actually has the end effector tooling on it.
My question is how do i define a grip from the robot to that tool, so I can move it to the other riser (as you can tell from the animation).
I am not working in Inventor Studio, otherwise this would be somewhat simple. I am doing this in Dynamic Simulation.
My thought was to create a spacial joint between the robot and the tool. But then how would I control through the timing where its location is?
I'm happy with the NX version, but if I want to upgrade to XT, how do I do it? I looked on the upgrade options for XT and upgrading from NX, is not there.
View 8 Replies View RelatedHow can I fix a picture that is blurred when I snapped due to my hands shaking? Here is the picture below
This is an important picture.
When placing images in photoshop (CS6), their quality is diminished such that they are too blurry to edit. They're high quality photographs and scans... What am I doing wrong?
View 9 Replies View RelatedI'm doing all those tuts step by step and at the end my image is kinda blurred, it is not shiny as the images posted at the tutorial, why is it?? Do I have to change any config at my photoshop?? I'm using photoshop 7.0. My images are not clear, even if draw a simple rectangle, it appears blurred, does anybody knows why?
View 2 Replies View RelatedAnyway to fix the blurryness of the logo..
View 7 Replies View Related
