i have vs x3, windows 7 x64, ati radeon hd 5730 with latest drivers. i edited 1920x1080, vbr 16000 kbps videos. i use mpeg optimizer, i says all video is %100 compatible with suggested values. result has cracked frames. it doubles some parts close to cut transitions. and it has some frames that has some boxes seems like compression errors that it has abnormal color lines.
when i uncheck "Perform smart render" it is ok.
Nowadays, MP4 is widely used video format in our daily life and slowly it became the best popular video format. For some DIY lovers, It believes that you always edit your movies using a video editor like Sony Platinum Suite, Magi Movie Edit Pro Plus and Corel Video Studio Pro, etc. to make a your own style video.
Really happened, I am also a DIY lover and I always to edit my video with Corel Video Studio Pro X6 for playback on my portable device or burn movie to DVD. For example, I am an office worker and I always take much time on my way to work. So I rip the DVD to MP4 on Mac and then edit it with Video Studio Pro X6 for a better enjoyment.
Now let’s cut to the chase! It is really a big and exacting Serendipity. Yesterday I rip and convert my DVDs to my Mac computer and then edit it with my Corel Video Studio Pro X6. To my surprise, Seven minutes HD mp4 video, it just takes 9 minutes to output it. Then suddenly I got an idea, have a test with the entire popular video editor and Make a comparison.
After the test，I found that The same material, the same color and then same configuration，Corel Video Studio Pro X6 is obviously faster than Magi Movie Edit Pro Plus, Premiere CC、EDIUS7.0 and Vegas12, etc. Then I Immediately the video to my MOTOROLA ME865 SD CARDS and then play it with my smartphone, it is very smooth; then I copy the video to my U disk, and inserted it into my hisense flat-panel TV, it works well, too.
Seven minutes of hd MP4, the volume is 592 MB, and then a minute within 100 m on average, that is, an ordinary DVD, hd can hold 45 minutes MP4, convenient to keep the family film. The Conclusion is that ulead video studio has a bright spot, the new version of their X6 version described output hd MP4 has unique advantage! That’s all!
I have been trying Video Studio a few times in the past. The first version I ever tried must have been Ulead Video Studio 7 or 8. I always liked the process oriented GUI and the goodies that are made so easy compared to other video editing software. I remember version 8 and next to be very unstable though, which is why I kept working with other software like Pinnacle. Each time there was a new version though I tried it and I have seen stability improving with every version. I would like to work with Video Studio a lot, however I have serious problems with output quality.
Since a few years I am filming HD video, AVCHD standard (1080i50) with a Panasonic HDC-SD5 and recently HDC-SD900. The last one, a new camera, offers incredible detail and quality. Of course I want to see the same quality in my end product, the output of the video editing software. Here is where I have a big problem.
1. When I save output as AVCHD an use smart rendering there are problems with the transition between two clips. There are blocks all over the place. I have tested this with X2, X3 and X4. I remember in X2 there seemed to be some frames in the wrong order at the end of each clip. In X3 there were blocks. In X4, which I am testing now, sometimes output is good, sometimes there are blocks worse than I ever saw in X3.
2. When I save as AVCHD, Bluray, H.264, ... no matter what format in 1080i without smart rendering there is a big quality loss. It is really visible, especially on the pc screen. I have tried many settings: bluray 2-pass encoding at 30.000bps, AVCHD and H.264 at 18.000bps. It seems to be impossible to get good quality out.
No matter what I did, I cannot even approach the input quality with Video Studio. And let's face it, it all comes down to the output!
I have tried encoding with some other free tools such as Handbrake and Staxrip. Of course these are not video editors, but at least I could compare the output quality.
I'd like to post some videos on Vimeo .
They footage was shot in DV CAM on a Sony A1 and the footage and the project is:
PAL (25 fps), Microsoft AVI files, 24 bits, 720 x 576, 16:9, 25 fps, Lower Field First, DV Video Encoder -- type 1 DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
Vimeo recommends the following settings:
Codec: H.264 (MP4)
Frame rate: same as shot ie 25 fps
Data rate: 2000 kbps (SD)
Choose 640×480 for 4:3 SD video, 640×360 for 16:9 SD video
If you have the option to control the pixel aspect ratio (not the display aspect ratio), make sure it's set to "1:1" or "1.00," sometimes referred to as "square pixels."
Deinterlacing: Maybe - if you are shooting on an older camera, enable the deinterlacing option. Otherwise, you may get weird-looking horizontal lines in your video. With newer camera models, deinterlacing shouldn't be an issue, so you can leave this option unchecked.
Audio
Codec: AAC (Advanced Audio Codec)
Data rate: 320 kbps
Sample rate: 44.1 kHz
When tying to create the file though the frame size for mp4 though does not seem to give an option for 640x360 on the drop down menu. 640 x 480 seems to make it look stretched? Should I choose 720 x 576 as it originally was?
Also, what should I do with the box 'perform non square pixel rendering?' and how does that relate to the pixel aspect ratio info? And what about the bit about deinterlacing - not sure what that means.
Using a Canon Powershot G12 camera and it records 1280x720 px .mov, H.264, 23.976 fps.
Doesn't matter how my project properties are in Videostudio Pro X3. Think I tried almost everything. As soon as I create a video through VS Pro X3 (all update patches installed) the result is a jerky video. Using the recommended (by Corel) version of Quicktime, as the most recent Quicktime version causes VS to crash. Tried this on 3 different computers with the same result.
Project settings:
TV standard: 24 fps
Frame rate 23.976 fps
Frame Type: Frame based
Frame size: 1280x720 px
Compression: Doesn't matter (same result anyway)
Share:
Create Video File:
- Same as project = Jerky video
- Upload to YouTube (MPEG-4 HD 16:9) = Jerky video
- Xvid or any other format = Jerky video
Here is the file on YouTube as it should look (original .mov file from the camera directly uploaded to YouTube): [URL]
Here is the file on YouTube after created with Videostudio Pro X3: [URL]
I've been playing with a free trial of X5 and I'm tempted to buy the full version but I am struggling to get good quality output.
I have a number of clips at 1080p (30fps) and 720p (60fps). These look excellent when played raw from the videocamera files (MP4s), but no matter what output I select from Videostudio they look as if there is a stutter as if played at a lower fps. This effectively renders Videostudio a non-starter as my videos will look worse edited than unedited. Am I missing something, or is this a limitation of the software.
I have a hex core AMD 1050T with 16GB of memory and a GTX560Ti so there should not be a performance problem.
I have created several chapter markers in the video timeline and when I go to share and create a DVD or blu ray disk I see the chapter markers are reflected in the the create chapter menu which is what I would expect. I don't want to create a whole disk but I want to create a video file like mp4 that includes the chapter markers as part of the video file. I believe that the mp4 format supports chapter markers based on this page [URL]
I can't seem to create a video output file that also includes the chapter markers. Is this possible in video studio x4 or am I forced to create a DVD or blu ray disk with a menu structure in order to preserve the chapters in the resultant output?
I have upgraded to X5 (15.0.0.258) Windows 7 64-bit QuickTime Player 7.7.1 K-Lite_Codec_Pack_840_Basic.exe
I am using an input file of:
a 30 second .avi file, frame size 1440 x 1080 15 frames/sec
Video compression Microsoft DTV-DVD Video Decoder, 24 bits, total 450 frames
Audio compression PCM 32.000 kHz, 16 bit Mono 960,000 samples.
I was using X3 version [URL].......
If all I do is clip the .avi to a 10 second output (eg .mpg, .mpg, .wmv) with no editing, I get a jerky movie (which appears to be one frame per second).
I have put up a 10 second clip here to show a sample of the jerkiness (which was created using x3) but it is the same jerkiness.
[URL]...........
PS MediiaInfo
General
Complete name : D:2012_03_22 Lorikeets.AVI
Format : AVI
Format/Info : Audio Video Interleave
File size : 25.6 MiB
Duration : 30s 0ms
Overall bit rate : 7 167 Kbps
Video
ID : 0
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L5.0
Format settings, CABAC : Yes
Format settings, ReFrames : 1 frame
Format settings, GOP : M=1, N=15
Codec ID : H264
Duration : 30s 0ms
Bit rate : 6 519 Kbps
Width : 1 440 pixels
Height : 1 080 pixels
Display aspect ratio : 4:3
Frame rate : 15.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.279
Stream size : 23.3 MiB (91%)
Audio
ID : 1
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : 1
Duration : 30s 0ms
Bit rate mode : Constant
Bit rate : 512 Kbps
Channel(s) : 1 channel
Sampling rate : 32.0 KHz
Bit depth : 16 bits
Stream size : 1.83 MiB (7%)
Interleave, duration : 1000 ms (15.00 video frames)
So to share an iphone 4s video, what are the best output settings, to retain the .mov settings, so that there is the least amount of re-encoding, which presumably will be the fastest?
View 1 Replies View RelatedI'm creating video clips in Corel Video Studio X4 Ultimate (Education),for use in creating multimedia PDFs with Adobe Acrobat X Pro.
The formats Adobe Acrobat says is accepts include MPEG 4 / H.264,so in Corel Video Studio X4 I've tried selecting the following types of output file:
1) "MPEG4: iPhone H.264 (640 x 480)" My preferred resolution, but Adobe Acrobat won't accept it, apparently because it's "Sony PSP" (according to an analysis by MediaInfo), not supported by Flash, according to an advisor on the Adobe forums.
2) "MPEG4: iPod H.264" (320 x 240) This is accepted by Adobe Acrobat, even though it's also Sony PSP (according to MediaInfo). But this isn't enough resolution for my purposes.
3) "MPEG4: iPhone 4/iPad HD" This is also accepted by Adobe Acrobat, but the resolution is too high (1280x720) as the files are too large.
When first making the video in Edit mode, is there any way to see the final output size before or after selecting Create Video File before the file is created.
If I choose Create Disk it will show the output size.
If not what would the maximum running time be for DVD output?
I've just completed my first project and when I attempt to create a video file for hard disk output I'm unsure what option I should select from the drop down box that gives me the highest quality without re-rendering the video.
My AVCHD 50p original files are according to the file properties in VSP -
PAL HDMV
H.264 Video
24bits, 1920/1080, 16.9
50.000 frames/sec
Variable bit rate (max.26000 kbps)
Dolby Digital Audio
48000 Hz, 5.1 channels 384 kbps
So it looks like I need to select AVCHD 1920x1080 50p however in the properties for that file creation, the video bitrate is max 20000 kbps (my video 24.7) and audio is only 2.0 (my audio 5.1).
I really would like to retain the 5.1 audio and my higher video bitrate.
Also when I view the project properties the video is shown as 1024 x 576.
PAL double (50 fps)
Microsoft AVI files
24 bits, 1024 x 576, 50 fps
Frame-based
Uncompressed
PCM, 48.000 kHz, 16 bits, 5.1 Channels
could i get a broadcast video output in Photoshop CS4.I would to check colors on a PAL monitor,
View 1 Replies View RelatedWe're producing some video to be projected, so to see what the final output will really look like, I'm doing video previews using FireWire so output goes directly to the projector.
It's been working great up until yesterday. Was working fine until I had to restart my Mac. Upon reboot, my the projector no longer gets any video output.
I've tried restarting numerous times, checked all connections, etc. Got it working again after several restarts, but after switching over to Photoshop momentarily, the video output once again disappeared.
how to regain consistent Firewire output for Video Previews?
My setup:
After Effects CS6
Mac Pro
OSX Version 10.7.5
Firewire Output of my Mac's monitor is going to the Firewire Input on my Sony Media Converter
RCA Video out (Composite video) going to the projector's video input.
After Effects Video Preview preferences:
Output Device: FireWire
Output Mode: Apple FireWire NTSC
I have received a request to convert an Adobe Edge Animate animation output to a video format such as .mov
View 2 Replies View RelatedI recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
I have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
View 5 Replies View RelatedIn creating a video output I am looking for WMV Frame Width 720 Frame Height 480. I have created outputs with WMV HD 720 30p that is 1280 by 720... My issue when I stream that wireless over to my game systems or even my laptop. I am getting lagg. I get no lag on video outputs with WMV 720 by 480. Those video I created with Microsoft MM. I just got VideoStudio and its great! , but my issue I would like to output to WMV 720 by 480 and I do not see that option.
I have been on game forums and wireless forums, and since the WMV 720 by 480 and still working. I am trying to use VS3 to output to that for testing.
My setup is that my game systems and laptop are connected to TV in the house so I stream our events to them for people to see.
WMV HD 720 30p that is 1280 by 720 - is causing the lagg...
WMV 720 by 480 - no lagg...
I use the VideoStudio Pro X4 to edit my videos.
This time I have some problems with the quality of my finished projects. I have tried to burn my project as both DVD and AVCHD. On DVD the quality was really poor with grainy picture.
The AVCHD disc was much better but there was lots of "strobe" in the movie. Especially where I have added transitions and text fields.
My raw video-files is HD video (MTS-files). I also use the proxy tools to make the editing go smoother. I think my computer should handle this without the Roxy, but it doesn't.
I use this settings for my project: Settings --> Project Properties:
Edit File Format: MPEG
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Lower Field First
(DVD-PAL), 16:9
Create Disc --> AVCHD:
MPEG files
24 bits, 1920 x 1080, 25 fps
Lower Field First
(HDMV-PAL), 16:9
H.264 Video
Video data rate: Variable (Max. 16000 kbps)
LPCM Audio, 48000 Hz, Stereo
Create Disc --> DVD:
MPEG files
24 bits, 720 x 576, 25 fps
Lower Field First
(DVD-PAL), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
Is it possible to edit a video, and have the output format, frame rate, etc r3epeat the input? So edit scenes etc, but not alter the quality from input.
View 8 Replies View RelatedI am working on a simple video with two (3 second) overlay video clips. In the preview window everything looks great. After compressing the overlay clips shrink in height revieling the top & bottom of the main clip. If I over-stretch the overlay clips they still shrink down. I have gotten it to work once (don't know why) but that rendering the audio dropped off when the overlay started and never came back. That's a separate issue.
I saw where one person trying to solve a different issue mentioned to streach the overlay clip by the corners only? Is that important? I also tried turning on and off the "stretch to fit" option. I am not seeing a patern? I have also tried keeping the aspect ration on and off but that does not seem to give consistant results. I am sure it is a combination of some type.
Main clip:
Data rate: 9421 kbps
Video: Windows Media Video 9
24 bit, 1920x1080, 29.970 frames/sec
Aspect Ratio: 1.78:1.00
Overlay clips:
Data rate: 1309 kbps
Video: Windows Media Video 9
24 bit, 1280x720, 25 frames/sec
Aspect Ratio: 1.78:1.00
I have a project with a number of mpg files in it. These mpg files were created using X3 from mts files.
I have done this many, many times. I created an mpg a few weeks ago without problems. Now, all of a sudden, I try to make the same mpg files and the exported video will stutter in places. It doesn't matter how many times I render the same project, the video stutters in the same exact spot. Like I said, I've done this many, many times and never had this problem.
what may have changed or been installed on my computer recently to cause this? I even reinstalled X3 with no luck.
Is there a way that you can convert a 4.3 import to a 16.9 output? I have imported a musical from a disc which is recorded in 4.3. I would like to output this as a widescreen video. I have tried putting in on the overlay track which gives a better output result but still has the borders each side.
View 5 Replies View RelatedI recently upgraded from VS Pro X4 to VS Pro X5 and was shocked to see that there is no option to output a project to FLV under '3 Share > Create Video File'. Is this a feature removal or am I cursed with a defective copy of VS Pro X5?
As you can see in the screen above, the option (which was located at the bottom of the menu in VS Pro X4) is absent in VS Pro X5.
I am using Corel Video Studio Pro X4, I have asked the below questions previously, so far there has not been a solution. It appears Corel do not have any way to contact them when there is a problem
I chose this programme over Cyberlink Power Director as it had the 5.1 mixer and 3D capabilities. I now find Power Director Ultra 10 now has the 3D Capability, the 3D works very well, but no 5.1 mixer only a pesudo type 5.1 sound, the programme itself looks to be excellent quality.
Should there be no solution to my above problems, then the only choice I have is to use Power Director, a pity.
My previously posts are below -
3D Anaglyph - viewtopic.php?f=1&t=44703
5.1 Sound - viewtopic.php?f=1&t=41984
The cracks (two levels of texture) are very well done. Lots of the grunge effect. Orange/Red photo filter over the top of it to give it some uniformity.
View 3 Replies View Relatedhow you can turn someone's face into a scary cracked face as shown here...
View 9 Replies View RelatedI'm testing demo version of this product and I would like to know how to change output parameters of mpeg-4 codec (Share->Create Video File->MPEG-4-> MPEG-4 HD). I live in Europe and my video source is Full HD 25fps, but Video Studio's mpeg-4 codec has only parameter constants 30fps.
View 5 Replies View RelatedI can't seem to convince X4 to output a 640x480 (or 720x480) mainline MP4 that is 16:9 - they always come out as 4;3 letterboxed . Is there some way to install another MP4 Codec that will do it or will installing DivX or Xvid at least allow me to generate 16:9 .avi files at those resolutions?
View 11 Replies View RelatedI am looking for producing Blu-Ray compliant output from VideoStudio. I have VS PRO X4 with SP2. The input is AVCHD from a Canon HF200 and the target is Adobe Encore.
The reason for Encore is that I need a good navigation solution. VS’s menu and navigation is somewhat primitive. But Encore is notoriously zealous about compliance. An had given up on getting Encore to recognize anything from VS as compliant but took another look and now I’m even more confused.
As a baseline, if you take the raw clips from the camera and put them into Encore it accepts that they are Blu-Ray (H.264/AC3) compliant and will not attempt to transcode them. This is what I want since the output will be essentially the same as the input so no loss and the time to output is quite fast. The exception to this is when something like a transition occurs then it must be rendered. What I was not expecting is that VS does not appear to render the whole clip. It renders the bit that has the transition or effect or title etc. up to the next GOP then appears to revert back to not transcoding again. I can’t be 100% sure of that but carefully watching the CPU and disk activity and showing the render progress it is quite obvious that when it gets to raw footage again it starts behaving like a file copy rather than a render. This suggests that SmartRender actually does try and do the right things.
I did try to put a clip at the front of the project then tell VS to render as per first clip. This did not work, the output was compliant but it decided to render everything. I would expect this to be the ideal case for NOT rendering but something went wrong. If you put an item that does need rendering followed by the raw clips it renders than flips into just copy. There seems to be a logic fault here somewhere. Then I found that if disabled SmartRender the output for was compliant but it rendered all the clips.
If I output the project as Blu-Ray (MPEG-2) it come out as fully compliant and Encore won’t touch it. Of course it is twice as big as the original and some degree of rendering must have taken place, although it takes only a fraction of the time for other renders. I am not sure why this is the case either. If I use the other options (like 1440x1080i) it is also compliant (although the scenes are totally distorted as you expect).
I also tried a custom preset setting the video to 1920x1080i with a max bit rate of 20000 H.264 and the AC3 to 384kbps. I know there are quite a few more factors in Blu-Ray compliant video but this is all I can set.
It seems no matter what I do I get compliant Blu-Ray output EXCEPT for the one I really want with SmartRender doing it’s thing.
All I can conclude from this is that VS can produce compliant Blu-Ray and SmartRender short circuits the render but for some reason already fully compliant video gets turned into non-compliant video.
I'm splicing together a couple of avi files and outputting as a 720p .wmv. The final file is about 15 minutes long. At each of the straight cuts (I'm not using transitions) in the output file, two or three seconds are cut off! I've tried outputting in different formats and it still occurs, but if I shorten the entire file to a minute or so, it doesn't happen. I've tried it with proxy on and off. I've edited in the very same configuration very often previously and haven't had this problem before.
View 5 Replies View Related