Write the elevation text in a cad file from attached text file.
In this text file Easting Northing and Elevations are given. We have hundreds of that text files.
I have a file path im trying to capture in a text file however its not working and autocad is prompting back,
; error bad argument type: streamp nil
Im assuming its because of the slashbacks but Im not sure..
Hence the code so far...
(defun C:GO ()(SETQ ACADLSP (findfile "acad.lsp"))(setq f (open "C: est.txt" "w"))(write-line ACADLSP f)(close f))
Is there a way to import layers from a text file?
View 9 Replies View RelatedReplacing characters in a text file.
I solved the following Lisp routine chore. I have this csv file of coordinates (and many more) that comes from a total station:1,100,100,10,50
2,100,200,12,50
3,200,200,12,50
4,200,100,10,51
and should replace the code after the last comma like this:1,100,100,10,.50
2,100,200,12,.50
3,200,200,12,.50
4,200,100,10,..50
To be able to generate the topographic map. And I have this code but does not work properly:
(defun c:cod (/ filename fileopenr readline)
(if (setq filename (getfiled "!!! SELECT *.csv FILE COORDINATE:... ¡¡¡" "c:/" "csv" 0 ))
(progn (setq fileopenr (open filename "w"))
(while (setq readline (read-line fileopenr))
[[code].......
I have the following code which isnt quite working, it reads a text file which has a list of Names of images and their bottom left coordinates i.e. name x y etc. I want it to check for a name equal to that input then in this case alert the user it is found, eventually I want it to load the tile but for the moment where am I going wrong, also the lisp wont close the file and I dont know why.
(defun c:imi ()
(setq IM (getstring "
Input name of 2010 tile"))
(while (not (= "" IM))
(setq TILE (strcat "BM" IM))
[Code] ......
I know how to write a single line of text to a txt file with LISP, but how do i write two or more lines of text to a txt file ussing lisp?
View 4 Replies View RelatedI have spent the last three days writing a lisp program that will copy a text string from one text file and paste it into another. I have tried using the write-string, getstring, prin1, princ and print functions with no success.
View 6 Replies View RelatedI want to write content of variables to a text file but I should have conversion function for variables.
for example
(setq a 123); a is an integer type, contetnt of a is 123
so I should use (itoa a) to get "123" as a string and then I can write it to text file.
but what about another type of variables?
(defun ToString ( a / result)(setq result "")(cond((= (type a) 'ENAME) (progn (setq result "Entity names")))((= (type a) 'EXRXSUBR) (progn (setq result "External ObjectARX applications")))((= (type a) 'FILE) (progn (setq result "File descriptors")))((= (type a) 'INT) (progn (setq result (itoa
[Code].....
I can't write unicode characters to a text file.
as you know, you can write chars on text screen easily: (write-line (strcat "\U+" "2122"))
but if you want to write chars to a text file, this command does not work: (write-line (strcat "\U+" "2122") TxtFileVar)
Here is a part of my code to test:
(defun C:HexGen ( / d f S w x y z h c)(setq d '("0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "A" "B" "C" "D" "E" "F") f (open "c:\0000-FFFF.txt" "w"))(foreach w d (foreach x d (foreach y d (progn (setq S "") (foreach z d (progn (setq h (strcat w x y z)) (setq c (strcat "\U+" h));;;<===character (setq S (strcat S " " (strcat h " = " c ))) ) ) (write-line S f) ) ) )) (close f)(startapp "notepad" "c:\0000-FFFF.txt"))
I'm looking for a way to find out what all plot styles are set in drawings in a sheet set.
We are transitioning from color based pen settings to style based and would like to be able to export a log that shows the variable PSTYLEMODE for each drawing in a sheet set. I plan on using ScriptPro to run it on the full sheet set.
Civil 3D 2013
Windows 7 64-bit
Xeon W3550 3.07 GHz
Nvidia Quadro 4000
12.0 GB RAM
Im trying to come up with a lisp that will export x and y coords to a txt or cvs file. However, I need the lisp to export in this format
Units Inch
WPT 1 0 0 ( X=0 Y=0)
WPT 2 1 1 (X=1 Y=1)
WPT 3 2 2
I need to be able to set my zero with move origin and the export the points.
Run TIME command and then take the resulting text and save it to a file.
Ideally, the text file should be named based on the drawing name. I know there's ways to write text to a file but I haven't had any luck taking the output of a command and exporting it.
how to append I’m assuming its not write-line but append line. And also I’m having trouble recording the date variable… I keep getting error bad argument type stringp nil
; Appends usage count by DATE long variable...(setq g(open "C:/ICT/AutoCAD_Architecture_suite_2012/CUSTOM/WOOD Clones/PEN/USSAGELOG.PEN" "w"))(setq MYDATE DATE)(write-line MYDATE g); AS ABSOLUTE LAST WE NEED TO CLOSE THE TEXTFILE...(close g)
I have the following code snippet I’m trying to append the file named USAGELOG.TXT to record the date of executions
I have a text file with a list of image tile names with their bottom left hand easting and northing see attached. I have a lisp that asks for the name of the image then should insert the image at its coordinate with a predefined scale and rotation but it isn't working so I would like an alternative method to test.
View 4 Replies View RelatedNeed a lisp that could dump the values of a list command in a text file placed in a folder C:user121list.txt.
View 9 Replies View RelatedI am working on a flood inundation, I would like to find a lisp or command(i'm not finding) to connect two points with a given elevation following the surface file or surface entities.
here is a small section as example right now it's just guesswork, some of these have taken a week to connect all the sections.
I got a new work and get it done in the next 2 days, but first I need to do this... from a text file (or excel file, I got both) I got 3 columns, 1 one for node number, and 2 other for X and Y coordinates for each node.
So from that file I need to insert into autocad the node numbers as text (using the current style and height) at the point specified by the other two columns, that are the X,Y coordinates which will be the insertion point of text..
I’m trying to create a plot command that reads settings in from a variable stored in a text file but its becoming muddled up somewhere.
(defun c:MYPLOT ();Setting nessesary variables...(setq fname "C:/ICT/AutoCAD_Architecture_Suite_2012/CUSTOM/TREADSTONE/PEN/MYOUTPUTDEVICE.PEN")(if(setq f(open fname "r"))(while (setq MYOUTPUTDEVICE (read-line f))(close)))(setq fname "C:/ICT/AutoCAD_Architecture_Suite_2012/CUSTOM/TREADSTONE/PEN/MYPAPERSIZE.PEN")
[code].......
I have two attributes "REVN" and "REVD" in a block "ATT" that I would like to change (globally preferably) to the following.
(1) Existing text to keyboard entry text.
(2) Colour from existing to 10
I am a bit lost in the (command "-attdef" .......)
(defun c:atc ()
(setq rev (getstring "Please enter review"))
(setq dat (getstring "please enter date"))
(command "-attdef" .."ATT".."REVN"....."c" "10")..)
(command "-attdef" .."ATT".."REVD"....."c" "10")..)
)
When I click on an object to retrieve it's extended data, the data keeps writing to the right, it does not return to the next line, when the text approaches the end of the screen. Very difficult to analyze information.
View 4 Replies View RelatedI want to know is there any formula/calculation for the width of text object before creation/insertion? At now I used approximated width size via a simple .
(Defun GetStrWidth (str H W) (fix (*(* H W) (strlen str))));;usage: (GetStrWidth "This is a Text." 2.5 0.8);;H: TextHeight; W: width factor.
I know that for the existed text in drawing I can use textbox command, but for the texts that has not been created, what can I do? Is there any formula/calculation depends on font name, text height and width factor?
We are using autocad 2012.
Is there a way to move all 3.5mm text to layer text3.5 and move all 5mm text to layer text5.
A program that prompts:"select objects:" then I can select some objects like as text, line, circle,... after that program find all texts in selected items and swap text
swap means: xxx/yyy ===> yyy/xxx ; "/" is a divisor
swap function for one text is here:
(defun c:swap ( / pos ent el txt)
(vl-load-com)
(if(null #div#)(setq #div# "/"))
(setq #div#
(if(=(setq tmp(getstring(strcat "
Divisor character: <"#div#"> ")))"")
#div# tmp
)
[Code]....
but I want a program to prompt me like this:
(prompt "Select objects:")(terpri)
(setq a (ssget '((0 . "TEXT"))))
and gets divisor char </>:
after that:
(setq n (sslength a))
(repeat n
....
)
repeats n times, n=number of texts in my selection
3rd party tool which didn't match our scaling needs the file is a fas so I have tried to reverse engineer the whole function using trial and error. The following code works perfect except we need multiple (x amount) lines of text I have at current the M txt function which mimics and is effective for today however we need all lines to be individual.
I’m playing round with a loop but how to achieve my need..He had a 3rd party tool which didn't match our scaling needs the file is a fas so I have tried to reverse engineer the whole function using trial and error.
The following code works perfect except we need multiple (x amount) lines of text I have at current the M txt function which mimics and is effective for today however we need all lines to be individual.
;Starting lisp program...(defun C:REDtext ();Creating Layers (if non existant)...(command "layer" "m" "TEKST-1.5mm" "lt" "continuous" "" "c" "1" "" "");Memorising previous layer...(setq MYOLDLAYER (getvar "clayer"));Setting requierd layer...(COMMAND "LAYER" "SET" "TEKST-1.5mm" "");Setting variable "MYHEIGHT" to "DIMSCALE" x 2...(setq myheight (* 2 (getvar "DIMSCALE" )));Requesting and storing usser defind point...(setq MYPOINT (getpoint "Start punt :")); Requesting and storing user defind text...(setq MYTEXT (getstring T "Nieuw tekst :"));Placing text...(command "text" MYPOINT MYHEIGHT "0" MYTEXT); Restoring previous layer...(setvar "clayer" MYOLDLAYER);Closing lisp program...)
this code is used to fix specific font but its problem that it will prompt you to select single text
i need to make it to select multiple text so it saves me a lot of time,
;;; Process Individual request
(defun cht_ProcessIndividual ()
(setq sslen (sslength sset))
(while (> sslen 0)
(setq temp (ssname sset (setq sslen (1- sslen))))
[Code]...
I have inside every text,Mtext contents different text style like Arial_1 , Arial_2.
How i can give all the contents inside one style ? the normal procedure i will enter inside text to enter editing mode and changing text format style one by one. I want it once.
I want to save my routing of entering every text to change its content text style.
(Notice:select all from outside without editing mode will not do the job)
I am trying to export each sheet in an Excel file to an separateTXT files.
I currently have code to read each cell in a sheet, but unfortunately some of the Excel sheets have in excess of 5000 cells and it is taking too long to read. So I am switching to another method.
The program will check dates of TXT files and XLS file to make sure TXT files are current (if not, open and recreate TXT files).Then read the TXT files (much faster).
Where I am getting stuck is 2 places -
Get the names of each sheet in the excel file (not always a known name)
Save each sheet as separate TXT file.
Here is condensed code so far without error checking, etc -
(defun E2TXT (FileName /)
(if (and (setq XLfile (findfile FileName)) (vl-file-systime XLfile) (setq XLapp (vlax-get-or-create-object "Excel.Application")))
(progn
[Code]....
(if (findfile MyFile)
(setq fl (open MyFile "a"))
)
the file exists however the open function still returns nil... the file is not read only, and permission on the file appear to be just fine.What other reasons would there be that cause open function to return nil?This is happening only on one machine. All the others are writing to the file just fine.
I am trying to make a script file to open a drawing and run a lisp routine. They both work independently just fine, the script file will open the all of the files fine... and the lisp is in the startup suite and works in all the files. But when I tell the script file to open the first drawing then run the lisp it hangs trying to open the next file after running the lisp. I have Filedia set to 0, but the message I get when it goes to open the next is "No canvas exists. click New Canvas." (And on top of that... Filedia even set back to 1 still does not display the Dialog box anymore, I have to shut down AutoCAD 2012 and start again then it works.) I Have tried several ways, Opening one at a time then run lisp, and open all files first and then try to run lisp (that closes the file after running) and try and run it again in the next... It will only run the lisp one time and then locks up from there.
View 7 Replies View RelatedI have more DWG files, all dwg file convert same size (A3 SIZE) PDF file and combine one PDF file. Find script program or lisp program.
I have script program for convert dwg file to pdf file but i don't know all pdf compile one pdf file.
I have text objects with the same Z value and I will select as follows:
(setq sstxt (ssget '((0 . "TEXT")(8 . "APS-text"))))
How to store this value in another variable "zvalue" to apply to:
(command "change" "select text objects" "" "_p" "_e" zvalue "") ?
