I am working on a flood inundation, I would like to find a lisp or command(i'm not finding) to connect two points with a given elevation following the surface file or surface entities.
here is a small section as example right now it's just guesswork, some of these have taken a week to connect all the sections.
I need very very often to know the angle between two surfaces to write cnc programms...At the moment i draw allways two lines normal to the line between the two surfaces an use then the angle measuring tool.Works good, faster then bks and dimensioning, but need also time and always need to delete the lines after...
Is it possible to get a lisp which ask für 1 point on the first surface, 1 point on the other surface and two points on the line between the 2 surfaces? So the lisp know 3 points of each surface and can give out the angle between... Should be allways between 0-180°
So it needs only 4 klicks to get a angle! That would be so great! Is there a lisp programmer who can make this possible?
I got this code in a web trawl to insert a block to points taken from a txt file......
its coming back with an error as follows:
; === Top statistic:
; Function definition (with number of arguments): ((C:INSERTBLOCKS . 0))
; Check done.
What does this mean and how can I fix it.
(defun c:insertBlocks (/ txtFile xyData expertVar attreqVar)(setq expertVar (getvar "expert"))
(setq attreqVar (getvar "attreq"))
(setvar "expert" 2)(setvar "attreq" 0)
(setq txtFile (open "c:\cad\textfile.txt" "r")) ;
[Code] ......
Write the elevation text in a cad file from attached text file.
In this text file Easting Northing and Elevations are given. We have hundreds of that text files.
This is what i would like to make a lisp for: if the user gives the number tree the last tree inserted entity's are deleted. If the user gives the number four the last four inserted entity's are deleted.
View 2 Replies View RelatedI know through the block command you can write out a selection of entities to a single drawing.But what I am wondering is if it is possible to have two drawings open, and transfer data quickly between the two?
As an example as we are detailing an assembly we create a title block around a detail, put dimensions and notes on as needed and would then like that to be transfered into another drawing next to the previously transfered detail drawing.
I want to code this lisp. The problem which I face is, In some drawings which come from the client, there are a lot of blocks.
I want to detect the blocks which has no sub-entities (but attribute) and add a rectangle inside this block, If it is an attribute add a line from 0,0, to insertpoint of attribute.
I am having nearly 1000 drawings where I need to change the title block in a new format.
I am stuck up in moving all the entities in cordinates 15,280 (upper point) and 205,55 (lower Point) to 275,294 (upper point and correspoing lower point.
I have 2 selection sets and I'm looking for a more elegant method of checking if both sets contain the exact same entities (note - the order of entities might be different).
View 9 Replies View RelatedI continue learning....
(setq ins (vlax-ename->vla-object ( ssname sele cod)) nombre (vla-get-name ins) ) (setq bloque1 (vla-item (vla-get-Blocks (vla-get-Document ins) ) nombre ) ) (setq s_ent1 (vla-item bloque1 1)) (setq pt1 (vla-get-startpoint s_ent1 ))(setq pt2 (vla-get-endpoint s_ent11 ))(setq s_ent2 (vla-item bloque1 2)) (setq pt3 (vla-get-startpoint s_ent2 ))(setq pt4 (vla-get-endpoint s_ent2 ))(command "_pline" pt1 pt2 pt3 pt4 "c")
Why dont draw de _pline?
I have redined AutoCAD's copy command alias to C, but to also do other things, like set a few important variables in the background. One of the lisps I've incororated are making new viewports, that also create layers that are visibly specific to the viewport being created.
We were tasked a while ago to do an easy job of copying entities (dimensions, text and what not) in a layout. The problem is, users are copying the viewports too, which is bit more ineffificent than using the create viewport command I developed.
Is there a way to see if a selection set includes (0 . "VIEWPORT") entities? If the check returns nil, well then all is good. If the check returns "true", then I can prompt the user that a "VIEWPORT" entity is selected. I can then exit the command, or ask the user if they are sure they want to copy the "VIEWPORT" entity.
I have a lisp that draws variety of entities such as lines, arcs, hatches, points, blocks, text etc. How can I make one single block containing all of them, i.e. one block that has all items drawn since the lisp was invoked.
View 8 Replies View RelatedI have code that will set and sae a current UCS to the front of an entity, of course, depending on the viewpoint. This is so, because we need all draft lines in front of 3D solids, such as dimensions, leaders for labels, text entities and so on (the reason for not putting these entities in paper space is another discussion ).
But I'll have on of two problems on numerous occasions:
1. The user forgets all together to run the command.
2. The user will pick the wrong entity that is in the foremost position in that view.
The code I have utilizes the following:
(setq ent (car (entsel)))
(vl-load-com)
(setq obj (vlax-ename->vla-object ent))
(vla-getboundingbox obj 'LowerCorner 'UpperCorner)
(setq LowerC (vlax-safearray->list LowerCorner))
(setq UpperC (vlax-safearray->list UpperCorner))
Then I'll analyze the X, Y and Z of both the lower and upper corners, and set my UCS to whatever is proper.
Is there a "LowerCorner" and an "UpperCorner" for all entities. I can't see "VSMIN" and VSMAX" working because the elevation of the returned coordinates is always "0,0"
I have a lisp routing that the user has to use, to create a ucs, that is exactly on the front of the entity the user selects, so that whne they are drafting, labeling, dimensioningn the 3D entity, none of the drating lines are hidden when plotted.
The code is as follows:
(setq obj (vlax-ename->vla-object ent))
(vla-getboundingbox obj 'LowerCorner 'UpperCorner)
(setq LowerC (vlax-safearray->list LowerCorner))
(setq UpperC (vlax-safearray->list UpperCorner))
[code]...
Then I do a condition to see which points are greater than others, and move the ucs depending on the view to the foremost point. The program works perfectly.... however, often, they forget to use it.
I was wondering if I could incorporate it in another lisp that everyone uses, but not having the user pick the entity they want to be in front of (sometimes they pick the wrong entity). Instead, take the group of entities (anywhere between 1 to 30 per drawing (these are piping spools, so the entity count is not that great in model space)) and set a front working plane in model space. Working in paperspace is not an option, we're just too deep into our templates and processes.
I know there is a vmin and vmax, but they are for the X and Y axis, a VMax along the Z-axis would be great.
I have uploaded the handout for my AU2012 class to Google Drive. The link is [URL] It contains the detailed explanation for all the source code used in entmake-ing and entmod-ing the new MESH (aka Subdivision Surfaces) entities. [URL]
View 1 Replies View RelatedI am modifying stuff in a dynamic block insert entity. There is no "endblk" entity at the end of these definitions and I need to cycle through every entity within the block definition. When it gets to the last entity, I get an error because you cannot entnext passed the last entity. There are 2 things:
1. How to retrieve the # of entities in a block without cycling through it.
Or
2. A quick lesson in the *error* function, I cannot figure out how to implement this. I basically want to to say:
(if (entnext myent)) returns a error, don't abort & continue on.
I am trying to create a selection set (or LIST) of all objects inside a unnamed GROUP.
I found a means to access the unnamed group, however I am having trouble creating the list.
Command: (entget (cdr (assoc 350 (dictsearch (namedobjdict) "ACAD_GROUP"))))((-1 . <Entity name: 7efe6280>) (0 . "GROUP") (5 . "130") (102 . "{ACAD_REACTORS")(330 . <Entity name: 7efe5c68>) (102 . "}") (330 . <Entity name: 7efe5c68>) (100 . "AcDbGroup") (300 . "") (70 . 1) (71 . 1) (340 . <Entity name: 7efe6268>) (340 . <Entity name: 7efe6260>))
In the example above, there are 2 entities in the group.
What I want to do is to remove a certain entity from the GROUP, then delete the entity.
Repeat until all entities of that type are removed (I can figure this part out...).
How do I create a Selection Set (or LIST) of all entities inside a GROUP?
To access the first GROUP name in the dictionary:
(cdr (assoc 3 (dictsearch (namedobjdict) "ACAD_GROUP")))
I have a drawing with various layouts that when I do a Zoom Extents the drawings is reduced to the size of a point.
I have done all the usual, ie: look for extra entities that are "out in space" so to speak and there are none.
I wonder if I have a block or image which may have an insertion point "out in space" and if this may be the issue.
Is there some way to Select all entities or Blocks (insertion point) that may exist outside a particular area ie: drawing limits.
I create contour line in TOPOGRAPH program, and I import these polylines to AUTOCAD. I have to set elevation for each polyline manually, and I waste a lot of time doing that.
So looking for lisp doing that automatically. I mean, invoke the command, set the first elevation and them select the polylines.
e.g. The first elevation is 530. The next polyline that I select is 531 and so on.
I have a (2D) drawing with hundreds of elevation lines as splines. They all have their supposed z elevation as text next to them. Is there a lisp that would raise these splines to the elevation in the text by firstselecting the spline and then clicking on the elevation text?
View 6 Replies View Relatedcan i use the "methods supported" " FindXYAtStationAndElevation" to retrieve a elevation and station from a profile view?
View 4 Replies View RelatedOf course with ACAD MAP (FDO Labels for example) or better with ACAD CIVIL : no problem !
But often I have to use a Standard AutoCAD ...
A lots of people have already asked for this routine :
But I search in this forums and some others and unfortunately I can't find any correct routine Full operational on ACAD 201X 32/64 bits
I have many 2D Plines with an Elevation : some Normal , some have been splined --> 1st problem
I would like to label them with :
- either a Block with ONE attribut : the elevation
- either a MText with a blank Mask behind
As you wish ...
Question : Size/Height of the Block or MText ?
Some 2D Plines are very long (2nd problem) so I would like a question like :
Label each Pline every xxxx Units ?
So on a Pline Contour of 2000 meters, I could have the elevation (Block or MText) every 50 meters ...
Of course I would like that the Block or Mtext will have to follow (rotation) the Pline (splined or not) where the label is inserted !
I need to let the user pick on an entity to get an elevation.
I was using getpoint, with osmode set to nearest, but it allows them to pick 2d items under the 3d items I want picked.
Without doing fancy laer manipulation to turn off 2d stuff, are there any tricks to avoid snapping on the 2d item?
I am thinking I might do an entselp, then try again at same point until i get a 3d one (non 0.0 z coord).
[URL]
I have a drawing that has 2D pipeline (only x and y, z value =0) and 3 topo contour lines ( with x, y and z vaules). I need to divide the the 2D pipeline into say 2000 points and then get the corresponding z values from the topo contour lines. I think it can be done by interpolating between the z values for the two apparent intersection points of the 2D line and the contour lines, the x and y values will be the same for the points that falls between these two aparent intersections. Is there any lisp out there that can do that.
View 7 Replies View RelatedCan you manually create a new cogo point and have it pick up the elevation from a 3D entity that you snap to?
I found this thread from 2010 that says no at that time.
[URL]
Is this still not possible with C3D 2013?
We have this need to have all of the solids in a drawing to be placed in the "solid" layer.
Sometimes folks are drafting lines to develop these solids, and keeping the lines on the "solid" layer, rather than moving them to another layer, or deleting them altogether.
I could get folks to run this command before leaving the drawing.
I'm thinking something along the lines of:
Select all entities that are on the solids layer that are not solids.
If nil, great, do nothing.
If entities are selected, let me do something with them.
I'm hoping the following can be modified ever so slightly.
(setq non_solid (ssget "X" (list (cons 0 "3DSOLID")(cons 8 "solid"))))
I need to place a circle, of a user-defined radius, as a marker at the endpoints of all lines in a drawing. how to accomplish this using lisp? It doesn't matter if they overlap; I can use OVERKILL to delete those objects.
I started the code with:
(defun c:cmark ()
(setq crad (getdist "
Specify radius: "))
)
But don't know how to cycle through the objects, determine the end points of lines only.
What I have is a topo plan in 3D (All contour lines have x, y and z values). My pipeline is on x and y coordinate only. I need to get the corresponding z value for say about 2000 points on the pipeline.
View 9 Replies View Relatedhow to use AutoLISP to draw lines between two points. I have x,y,z coordinates for the end points in an excel sheet which I can save as a text file. I need to pull the coordinates from the file and use them to draw the lines. There are 2000+ lines so it is not feasible to draw them manually.
View 8 Replies View RelatedLooking to make a selection set of points that are on a specific layer, and then create a dimension between, in this case, two points. I feel like it should be very simple, but I can't get it to work for the life of me. Here is the test code I've been playing around with:
(defun c:test (/ sel1 TC)
(setq sel1 (ssget "X" '((8 . "VPOINTS"))))
(setq TC (polar (entget (assoc 10 (ssname sel1 0))) (dtr 180.0) 9))
(command "DIMLINEAR" (entget (assoc 10 (ssname sel1 0))) (entget (assoc 10 (ssname sel1 1))) "V" (polar TC (dtr 180.0) 9) "")
[code].......
I have plines of circuits that sometimes have T's (line goes along, then T's out then back to T point and then continues).
Here is example line -
(setq List_Pline (list (list 0 0) (list 1 1) (list 0.5 1.5) (list 1 1) (list 2 2) (list 3 3) (list 3.5 2.5) (list 3 3) (list 4 4)))
nth 0 = (0 0)
nth 1 = (1 1) - T point
nth 2 = (0.5 1.5)
nth 3 = (1 1) - T return point
nth 4 = (2 2)
nth 5 = (3 3) - T point
nth 6 = (3.5 2.5)
nth 7 = (3 3) - T return point
nth 8 = (4 4)
I need to be able to pick 2 points along the line and find the shortest route.
Examples -
1st point at 1,1 and 2nd point at 3,3 - new line is nth's 3,4,5
1st point at 0,0 and 2nd point at 1,1 - new line is nth's 0,1
1st point at 2,2 and 2nd point at 3,3 - new line is nth's 4,5
1st point at 3,3 and 2nd point at 4,4 - new line is nth's 7,8
1st point at 0,0 and 2nd point at 3,3 - new line is nth's 0,1,2,3,4,5
1st point is 1,1 and 2nd point is 1,1 - new line is nth's 1,2,3
I've tried using vlax-curve-getParamAtPoint, but it returns 1st T point.
Synopsis of program -
Select Pline
Pick 1st point
check if on line
Pick 2nd point
check if on line
check if 2nd point is before 1st point, if so swap locations
find last nth of 1st point
find 1st nth of 2nd point
return list