I have a (2D) drawing with hundreds of elevation lines as splines. They all have their supposed z elevation as text next to them. Is there a lisp that would raise these splines to the elevation in the text by firstselecting the spline and then clicking on the elevation text?
View 6 RepliesI create contour line in TOPOGRAPH program, and I import these polylines to AUTOCAD. I have to set elevation for each polyline manually, and I waste a lot of time doing that.
So looking for lisp doing that automatically. I mean, invoke the command, set the first elevation and them select the polylines.
e.g. The first elevation is 530. The next polyline that I select is 531 and so on.
can i use the "methods supported" " FindXYAtStationAndElevation" to retrieve a elevation and station from a profile view?
View 4 Replies View RelatedOf course with ACAD MAP (FDO Labels for example) or better with ACAD CIVIL : no problem !
But often I have to use a Standard AutoCAD ...
A lots of people have already asked for this routine :
But I search in this forums and some others and unfortunately I can't find any correct routine Full operational on ACAD 201X 32/64 bits
I have many 2D Plines with an Elevation : some Normal , some have been splined --> 1st problem
I would like to label them with :
- either a Block with ONE attribut : the elevation
- either a MText with a blank Mask behind
As you wish ...
Question : Size/Height of the Block or MText ?
Some 2D Plines are very long (2nd problem) so I would like a question like :
Label each Pline every xxxx Units ?
So on a Pline Contour of 2000 meters, I could have the elevation (Block or MText) every 50 meters ...
Of course I would like that the Block or Mtext will have to follow (rotation) the Pline (splined or not) where the label is inserted !
I need to let the user pick on an entity to get an elevation.
I was using getpoint, with osmode set to nearest, but it allows them to pick 2d items under the 3d items I want picked.
Without doing fancy laer manipulation to turn off 2d stuff, are there any tricks to avoid snapping on the 2d item?
I am thinking I might do an entselp, then try again at same point until i get a 3d one (non 0.0 z coord).
[URL]
I am working on a flood inundation, I would like to find a lisp or command(i'm not finding) to connect two points with a given elevation following the surface file or surface entities.
here is a small section as example right now it's just guesswork, some of these have taken a week to connect all the sections.
I am currently writing a series of routines for setting the layers for text, leaders and dimension commands. The end goal is a system where any annotation command sets the correct layer for the duration of the command, then reverts back to the layer that was active before the command.
I have managed to complete all the code, and it appears to be working fine, I just have one question: I have used -layer "m" "Lay_name" etc... for all layer setting commands, rather than any code to see if the layer exists already. In my limited testing this seems to be suitable, nothing that exists on that layer seems to be affected.
I know how to write code to determine if the layer exists already and set the layer instead, but so far it seems unnecessary??
Write the elevation text in a cad file from attached text file.
In this text file Easting Northing and Elevations are given. We have hundreds of that text files.
Is there a lisp that will allow me to do a continuous dimension, but will alternate the dimension position from low, high, low and high? If there is no lisp already created, how to create one?
See Continuous dimension attachment for example.
I work at a glass and glazing company and this is how we dimension mullion width and DLO. See typical window dimensioning attachment for window elevation with dimensions.
I have a list ("temp.dwg" "temp2.dwg") and would like to add the string "insert text here" into each item in the list resulting in ("insert text heretemp.dwg" "insert textheretemp2.dwg"). how would i go about doing that using LISP?
View 2 Replies View RelatedIs there a way to programatically set a visual style before a drawing actually opens?
We have some huge models and people seem to forget to change their visual styles back to 2D wireframe before saving and exiting drawings. Some models will crash on some workstations when trying to open in a rendered mode.
I found a lisp with a function that looked to set viewport visual styles. But it does not seem to be supported anymore. --> (vla-put-VisualStyle vport 1)
I'm trying to write a lisp routine that, when I invoke the mleader command, osmode is set to "nearest" & orthomode is set off. I then would like the original settings to be returned.
attached is what I have written so far:-
Lisp that switches back on Selection Preview i.e. thickens and highlights lines when you hover over them?I don't know why, but they are always unticking the boxes.
View 4 Replies View RelatedIs it possible to execute a certain command based on multiple selections withinin a dcl? for example: two radio colums, one with selections A and B, and a second with selections 1 and 2. is it possible to program commands based on user selections from each column? ex: if A and 1- do a command. A 2- do a different command, etc...
I tried :
(action_tile "key1" "(setq A t")
(action_tile "key2" "(setq B t")
(action_tile "key3" "(setq 1 t)(done_dialog)")
(action_tile "key4" "(setq 2 t)(done_dialog)")
(if
(and (a) (1)
)
(command ...
but was unsuccessful. no matter which combination was selected, the command under all combinations would run.
I am trying to find a lisp that would get an attribute value (tag name = NBR_5) . I'm trying to run a simple routine that would let the user place the value from the titleblock attribute as text on a drawing. I see a ton of articles regarding getting attributes but I am not well versed in programming.
View 9 Replies View RelatedI have a routine that work fine, but I receive a nil at the end of command. How to fix that?
View 7 Replies View RelatedI'm trying to find acceptable point values to feed to the vlax-3d-point function for a vla-addmtext function. With vanilla lisp I just provide the point as x y = "7/32" "2-3/8". So I assumed that I could drop a 0 in for the z like: (VLAX-3D-POINT "7/32" "2-3/8" 0).
Then I thought I was going to be tricksy and try (vlax-3D-point (getpoint)) believing that I could pick the point and get what I need to feed the function, but yet again, no deal. The command line gave me:
node
of #<variant 8197 ...>
Nothing I can use in my code. So how do I find the point in a format that vlax-3d-point will like?
What is the magic word for put a point at each end of an arc, the lisp I have only put a point at center of the arc.
(defun cAA ( / i j ss e1 e2 p1 p2 p3 points )
(if (setq i -1 ss (ssget '((0 . "ARC"))))
(progn
[Code].....
Is there a quick way of getting the value of an attribute?
I have an attributed block called "tp_attributes" and it has and attribute called "OrderNum".
I just want to be able to quickly grab that value.
I use Spell Check regularly and I always check the entire drawing. I would like to add to the Spell macro so that when I pick Spell from the toolbar it goes past the Check Spelling window and begins checking the entire drawing.
I believe I need to insert Alt S into my macro to select Start from the window to begin the check. Is there a character or series of characters that will represent Alt in a macro?
I upgraded from Autocad 2004 to 2012 recently and my lisp file doesnt work anymore.
what it's supposed to do is when looking at the layout tab that you want you can switch to the model space location of the same zoom as the layout tab without messing with the layout zoom.
(defun c:msp ()
(setq cm (getvar "cmdecho"))
(setvar "cmdecho" 0)
(command"view" "d" "tmp")
(setvar "tilemode" 0)
(command"pspace")
(princ "Click TWICE on desired VPORT: ")
(command "mspace" pause "view" "s" "tmp")(princ)
(setvar "tilemode" 1)
(command "view" "r" "tmp")
(setvar"cmdecho" cm)
(princ)
)
I need a program that simulate this DOS command: dir /on/b *.dwg >list.txt
it list all dwg files on current open dwg file folder and sort them and finally put them in a text file with list.txt name. something like thistype list.txt)
test1.dwg
test2.dwg
test100.dwg
test256.dwg
test1005.dwg
(sort alphabetically and logically) because of disabled DOS utility in my PC I need a pure lisp functions, I tried to wrote this program but I couldn't!!
(defun c:listMaker()
(vl-load-com)
(setq path (getvar "dwgprefix"))
(setq fn "list.txt")
[code]...
and also I need a append a string(='This Is EOF') in the last line of the "list.txt" file.
I have text objects with the same Z value and I will select as follows:
(setq sstxt (ssget '((0 . "TEXT")(8 . "APS-text"))))
How to store this value in another variable "zvalue" to apply to:
(command "change" "select text objects" "" "_p" "_e" zvalue "") ?
the following returns true since the @ symbol tests for an alpha character.. (wcmatch "S101" "@*").What is the Dot Net equivalent?
View 2 Replies View RelatedIs there a command that is the opposite of starting an application to open up a file? Like:
(startapp "PlaySound.exe" (findfile "CuckooClock.wav"))
Instead of starting an application, how to shut all of its instances down. Let’s say I have iTunes and/or Internet Explorer w/ a few tabs open and I can close them down without getting to the application to terminate it the usual way.
Naturally,
(endapp "iTunes.exe") doesn’t work :-))
I am trying to get my original layer and lintype reinstated after the user is finished with the pline..I know Im suppose to use the while command but am now completely lost on which way to do this
(DEFUN c:TEST1 ()(if (not (tblsearch "LTYPE" "MYWC")) (command "-linetype" "LOAD" "MYWC" "C:/COUNTER.LIN" ""));SECOND PROGRAM...;CREATE CORESPONDING LAYER...(command "._Layer" "Make" "WC LEIDING" "Ltype" "Continuous" "" "Color" "211" "" "")(SETQ MYOLDCELTYPE (GETVAR "CELTYPE"))(SETVAR "CELTYPE" "MYWC")(while (PROGN(COMMAND "pline")(SETVAR "CELTYPE" MYOLDCELTYPE)))
I have a drawing that has 2D pipeline (only x and y, z value =0) and 3 topo contour lines ( with x, y and z vaules). I need to divide the the 2D pipeline into say 2000 points and then get the corresponding z values from the topo contour lines. I think it can be done by interpolating between the z values for the two apparent intersection points of the 2D line and the contour lines, the x and y values will be the same for the points that falls between these two aparent intersections. Is there any lisp out there that can do that.
View 7 Replies View RelatedI am looking for an AutoLISP routine, which gives all aligned dimensions of a closed polyline, drawn in 3d.
I have attached a 2D drawing for reference.
The following gives me the first folder string, with no back-slashes, that the drawing exists in.
(setq FirstFolder
((lambda (/ tmpDir tmpPos)
(substr
(setq tmpDir (getvar "dwgprefix"))
(+ 2 (setq tmpPos (vl-string-search "\" tmpDir)))
(- (vl-string-search "\" tmpDir (1+ tmpPos)) (1+ tmpPos))))))
Is there a way to find the name of the second folder?
Is there a way to find the name of the third folder?
The string length of the characters for each of the first, second, third (and so on) folders are different, which means I can't count character using the "substr" function.
I have a list that contains data like this,
"Tree-01-08-AA5"
"Tree-04-12-QV"
"Tree-10-30-QS"
How would I go about sorting this list by AA5, QV, QS? I know how to use vl-sort and reverse, but I do not understand how I would go about this.
I have to go into approx 600 3D Models and rotate them all by 90.
I've just tried to search for a lisp that will do this to all of these files in one directory and can't find one. Something that will do this and save loads of time. I need to do this tonight so that these MEP files will all be ready for tomorrow morning.