I brought a shp file of dots representing grinder pumps into my drawing, All the dots show up just fine ovewr the aerial photo on my screen, but when plotted, the dots are absent.
View 1 RepliesLet's say I have a series of dots of different diameter, and I want to plot them on an X-Y Cartesian chart, what is the easiest way to do this?
I think a simple macro would do the trick?
IEC schematic symbol in icon menu is absent. There is just JIC symbol library. Even there is no IEC folder in "Autodesk/Acade/Libs" folder. It contains folder named: Hyd_Iso125, JIC1, JIC125, Panel, Panel_mm, pid, pneu_iso125.
View 1 Replies View RelatedThere is a line (and two big dots) representing EVERY Assembly insert. And I've been trying to figure out how to hide them.
May be they were there because of some link/point code. But I was unable to find and thing.
In the attached screen shot (taken from a print preview), I've circled one of these dots and pointed at one of the lines. I need to get rid of these.
what Im looking and seen it around other places is like an outer glow but instead of a glow its dots where the dots closest to the object are large and close together and as they move out they get smaller and further apart...
View 8 Replies View Relatedthe normal form of Arial Black is not showing up on my font list in Photoshop.
Only the italic version is available for use.
I have verified in the Windows Font folder that both styles are installed.
As an engineering company we have started to convert hundreds of our drawings from AutoCAD to PDF using a batch utility.
However every file that is converted into a PDF file is opened by a PDF Viewer. We want to prevent this.
I opened my *.pc3 file and removed the check from the appropriate box. See below
I press OK, then save the file and close. However when I reopen the file, I see the box for Openining in PDF Viewer has been rechecked. No matter what I do, I cannot permanently remove the check from this box.
I have an OLE object in my drawing (a screen shot of a map) There is line work in the drawing as well. When I send it to the plotter it comes out looking great, exactly as shown on my screen. However, when I plot to PDF the OLE objects don't show up but the linework and hatching do.
View 9 Replies View RelatedI'm having a problem plotting to pdf (using ScanSoft Pdf Pro 4) causing Autocad Civil 3d: Infrastructure Design Suite.
When I plot in Civil 3d 2009 I have no problems but we recently switched to Autocad Civil 3d: Infrastructure Design Suite and when I try to plot a pdf 24x36 it looks correct in the plot preview but my final pdf size comes out 36x36. I have tried everything I know...
Create a new sheet size
I can't just save as an earlier version and plot in C3d 2009 because my alignments gets screwy.
I'm having trouble plotting a symbol over a line. For example, I'm doing a corner record and need to put our symbol for a set pipe on the corner of the property line. Our symbol for a pipe is just an open circle. I want to put the circle on the corner and do not want the the property line to be shown inside that circle. Essentially I want to make it look like I trimmed the line inside the circle but I want to leave the line intact so there is no gap in the boundary. What is the way to do something like this?
View 9 Replies View RelatedWhen Civil 3D 2013 came out I downloaded it and installed it. I imediately discovered that when selecting my window during plotting by window, if I zoomed or panned I would not be able to pick any points and would have to hit escape SEVERAL times to get it to exit out of the selection command. AutoCAD Civil 3D 2013 Hotfix 1 solved the problem and all was good.
When our office decided to all move to 2013 last month (DEC 2012) I installed it on the workstations then installed the AutoCAD Civil 3D 2013 Service Pack 1 skipping the hotfix. I assumed it was included (WHICH IT STATES THEY ARE IN THE README). Sadly I was wrong because we are experiencing the same issue all over again. All of our workstations that installed 2013 and then SP1 without installing the Hotfixes.
I have tried to install Hotfix 1 on these workstations but it doesn't install on the SP1 version AND there is no way to uninstall SP1 without uninstalling Civil 3D all together.
We need this to get fixed sooner than later because it is a major hassel to lock up everytime we go to plot.
I have 64 bit machine, Windows 7, kipp plotter, and two sharp printers.
When I send a sheet set manager plot to any of my output devices I get an autocad error. That boots me out of Autocad. I have used this in the past with 32 bit machine, Windows XP , kip plotter and two sharp printers and have had no issues. It worked great.
I have two sheet files (files which reference other drawings/data and contain multiple layouts) which do not plot correctly in a batch. Upon opening the files all profile surfaces (existing and proposed) do not display. I run SYNCHRONIZEREFERENCES to make the profiles show up. I would love a solution to that, but that's a different topic. So now the profiles show up, in all tabs and even in a plot preview. However if I try to run the Publish command and print all tabs to either .pdf, .dwf, or the plotter the profiles do not show up. I must go to each and every tab and plot the sheets individually.
View 8 Replies View RelatedI am curious what would cause my viewport to print as if it is filled with solid hatch? I haven't changed any settings for the viewport and even recreated it from scratch. In my print preview it shows it will print as it looks on the screen, however when it actually prints, it's filled in solid.
View 9 Replies View RelatedSince we updated to C3D 2012, our background masks are not plotting.They show up and seem to work properly in both Model and Paper spaces as well as print preview.
They do not plot whether it is selected through the MText dialog or in an Object Label dialog box.
I have made sure the draw order was correct and made sure that the "Lines Overwrite" option is selected.
This is happening on all three of our workstations which are a mix of XP and Win 7. We are printing to a KIP 3000 and I have made sure the drivers are up-to-date.
I'm using Civil 3D 2012. When it generates labels (alignment stationing, profile station & elevation, etc.), it keeps generating them in layer 0. It does not matter how I change the styles to the layer that I want.
It allows me to change the properties of the labels to the layer that I want after the labels have been generated. They look ok on my computer screen.
However, when I plot the plans, the labels do not follow the lineweights that the layer should be on. I think it still plotting as if it was layer 0. If I explode the labels, I can get them to plot correctly by changing the layer.
I have an HP DesignJet T1200. We are using AutoCad Civil 3D to plot large files that were exported from PLS CAD. These files contain multiple ECW's that average 5-10 megs each. Is there a customization we need to set to get the plotting time down.
Currently it takes 8-10 min for AutoCad to process the plot and once it is sent it takes another 8-10 min for the plotter to start plotting.This is telling me that there is something wrong with our setup. (see below)
workstations = DELL T3500 with Windows XP Pro; Intell Xeon 320GHz; Nvidia Quadro 4000/2g onboard RAM; 4g system RAM
Plotter = HP DesignJet T2100 on network
We usually have projects that contain 150-200 drawings that we need to work on and plot per project. This plotting time is killing our productivity!
We use Excel quite often in Civil 3d. Every now and then a system or drawing will randomly begin printing the OLE with inverted colors. ie black box with white text. Restarting sometimes works.. Sometimes not. is there a variable for it?
View 1 Replies View RelatedMy storm drain profiles will not plot the structures if I publish. They plot ok if I use the plot command, but I'd like to be able to publish.
View 4 Replies View RelatedI'm doing an architectural plan in Autocad 2010, what I did is that I draw all my plans on a single .dwg file. Now my question is how can I print/plot one of those plans, with my template on and the plan is scaled?
View 9 Replies View RelatedI want to "remove line weights" when plotting. But I want to keep my title block wording and a certain text within the drawing dark or "thicker". What would be the greatest approach to this.
View 7 Replies View RelatedI brought a normal 4 sided viewport into my layout, but needed to clip and make a viewport with 6 sides. I have also tried to redraw this by using a polygonal viewport. When I go to plot the page, parts or all of the viewport boundaries are on. It doesn't matter if I go to layer control and turn the layer off or freeze or select the non-plotting icon.
View 8 Replies View RelatedI’m a student in a land surveying program using AutoCAD Civil 3D 2012. When I try to plot my DWG to a PDF my line weights are not plotting accordingly to the layers. For instance, Layer 1 is set at 0.7mm line weight, Layer 2 is set at 0.3mm but when it plots to PDF they all look similar. I have double checked the options on the plotting screen and I can get the line weights to plot correctly on different drawings with similar settings. I’m wondering if the issue has something to do with the fact that the particular lines that are not plotting accordingly are parcel segments.
View 9 Replies View RelatedI am using Civil 3D 2011 because of a contract. Monday I created the View Frames and cut the sheets. As of this morning everything was printing properly. Over the day I added alignment labels to the sheets and other call outs, and now the Match Line text is not printing.
I have moved the match line object to the top of the drawing order, double checked the layer to verify that it is not set to no plot, and verified that the xref with the match line is on the top of the drawing order.
Attached is a screen capture of the corner PDF I plotted.
I've been working in C3D for about 5 yrs now, and one thing that drives me absolutely nuts about it is how to get the correct layers to display when plotting different sheets out of the same drawing, regardless of the layer state of my model. I worked in Terramodel for about 5 years prior to coming back to AutoCAD and became spoiled by the ease with which layers displayed on different sheets in the same drawing. You assigned a layer state to the viewport and that viewport always plotted that way.
It didn't matter what layers were on or off, frozen or thawed in the model view, once you jumped over to the sheet it always looked the same once you set it up. In C3D I've tried viewport overrides, jumping into the viewport and setting the layers then saving the layer state... All sorts of different approaches, but I've never found anything that really works. My projects are typically small enough that I have all of my sheets in the same drawing but want different layer settings on different sheets.
I have AutoCAD 2007 on my machine.I have made a dll using AutoCAD.NET API which does the task of plotting a DWG harness drawing to a pdf file.I specify the device name and the page size to be plotted in a AutoCAD.NET method SetPlotConfigurationName(ps,"DWG To PDF.pc3",papersize).It works fine as long as I keep on giving default paper sizes.But, when I create a custom paper size using the plot configuration editor which in turn produces a new .pc3 file and when I include the same as the device name in the above mentioned method,it does not work.It throws an exception as eInvalidInput.
View 1 Replies View RelatedI frequently have AutoCAD LT crash on me when I close a file. It seems to happen most after I have plotted the drawing.
View 9 Replies View RelatedI am on a 64 bit Windows 7 HP computer with AutoCAD 2010, and I am having a problem plotting a long (24" X 190") drawing file. We have a RICOH Aficio MP W3600 PS plotter. I have gone through the proper procedure through the Plotter Manager all the way to Select Custom Paper Sizes but the Add button is grayed out and I can't add a new user size. I was able to do this with AutoCAD 2004 on a Windows XP system but can't on this setup.
View 1 Replies View RelatedI have problems printing successfully the raster embedded images within a dwg file using the xerox 6279 accxes controller plotter. I use the 6279 hpgl/2 v 15.0.5 driver but when the file is longer than 1 meter long i lose the embedded images or are misplaced anywere in the drawing. I have also the same problem using other similar files with embedded ratser images
View 1 Replies View RelatedHaving trouble plotting a dwg file when it is deeper than 5 folders in a directory. I was given instructions a few years ago on how to correct this, but unfortunately lost/forgot them. We just upgraded to ACAD Mechanical 2012, and I need to modify this setting again...it was something simple, I just can't remember.
View 2 Replies View RelatedI am having problems plotting out parcels and creating label settings. I think I am missing an important concept in the object and display tab of setting creation. I am not finding going through the documentation. What I have found is not well explained.
I started with the OOB alignment settings. I noted that the Basic setting has a description that states the object will take on the settings of the layer it is created on.
I noted that if I adjusted the alignment properities to "Basic". I could then move the 'roadway' alignments to P-RD-CL and the swale alignments to P-SWALE-CL. Freezing the P-SWALE-CL then turns off the swale CL's, but keeps the roadway ones on.
I am looking for a fast way to determine which styles this works for or the area of the documentation that better explains how this works.
I am starting to explore creating label styles the same way. That way I can double or triple label pipe networks such that identical styles are labeled on an E&S layer and a PCSM layer and the individual lables can be dragged on the two different sheet layouts in the same file to avoid text over writes.