AutoCAD Civil 3D :: Drawing Template For Multiple Section View Production

Feb 21, 2012

How can I create a dwt file for the production of multiple section views sheets in A3 format and 1/200  ?

Civil 3D Section .dwt (Template/plan production) has only layouts for A0 and A1 plan and scales 1/500 - 1/1000 and 1/5000. I tried to change the format to A3 and scale to 1/200 of one of those layouts in the set up manager but didn't get a good result while producing section sheets.

View 2 Replies


AutoCAD Civil 3D :: Create Multiple Section Views - Production Mode?

Apr 11, 2013

When creating multiple section views with production as the placement option, all the sections superimpose on top of each other.  Attached graphic. 

I tried to attach the .dwt file used for the multi section view, but the site doesn't allow upload of file extension .dwt. 

View 3 Replies View Related

AutoCAD Civil 3D :: Multiple Section View In Custom UCS

May 14, 2013

I has a project where my Custom UCS don't is the Autocad's Original, but when I make Multiple Sections Views, the C3D does it in Autocad's Original UCS. How I make this on my Custom UCS?

Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz
4,00Gb RAM
Windows 7 - 64bits

View 9 Replies View Related

AutoCAD Civil 3D :: Plan Production With Multiple Views?

Dec 1, 2013

I am trying to use plan production to generate sheets for a long, skinny corridor.  I wanted to put two plans onto a single sheet.

I have tried a few settings, but get a duplicate of the same plan.  Is this possible, or is necessary to do it manually.

View 1 Replies View Related

AutoCAD Civil 3D :: Profile View Style X Plan Production?

Jul 9, 2013

I'm working with plan production sheets and having some trouble. My vertical exaggeration makes me want to split the profile, but when I do it, they get glued together. My left vertical grid numeration stays on the middle of the grid and I get a lot of information overlapped. What I need is to put some gap between these, or split'em. Other issue is that the axis offset of my Profile Style isn't being applied, as well as other configs.

View 2 Replies View Related

AutoCAD Inventor :: Parent Section View In One Drawing And Child View In Another

May 6, 2013

Is it possible to have the parent view for the section in one drawing and the child views in another drawing?

View 2 Replies View Related

AutoCAD Civil 3D :: Adding Cross Section To Section View Group?

Jul 17, 2013

Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?

C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit

View 9 Replies View Related

AutoCAD Civil 3D :: Section / Section View Of A 3dpolyline Along The 3d Polyline

Oct 12, 2012

I am working in Civil3d and have a 3d polyline that i want to generate a 2d section line of i.e the path of the section plane is along the 3d line

View 1 Replies View Related

AutoCAD Civil 3D :: Creating Section Sheets From Multiple Section Views

May 21, 2012

When i am creating section sheets from multiple section views ,section sheet  view port scale  changes.I did set it correctly in my template.

For example it changs from 1:150 to 1:150_1 

Then in section sheets scetions views are not displaying correctly.

When i change view port scale manually it shows correctly.But it should do to all sheets.

What should I do?

In model spacr multiple section views are showing correctly.

AutoCAD Civil 3D 2012 SP 2
Sri Lanka

View 8 Replies View Related

AutoCAD Civil 3D :: Unidentified Section In Section View

Nov 8, 2012

I am having an issue when producing a section view with my corridor.  I have a corridor and corridor surface, as well as an existing ground surface.  I create a sample line group and sample EG, Corridor Surface, and Material.  When I produce a section view I get 4 sections in the view: EG, Corridor Surface(with the corridor surface naming convention), and an additional section simply called "Corridor Surface". 

This last section is strange in that it seems to be using the correct assembly, but not targeting the correct features.  Also it has grips at all of the vertices which I havent seen before.

And the strangest part, when I click on properties for this section and go to section data, the columns for Description and Data Source are blank.

If there is no data source, then where is this section coming from, and why is it showing up when I did not specify that it be created.  This is a real mind boggler to me and makes no sense.  Screenshot attached.

View 5 Replies View Related

AutoCAD Civil 3D :: Section View Properties - Section Tab?

Oct 16, 2012

My future ground somehow disappeared out of one section view in my group. Under the section tabs I still have my existing ground and pipenetwork but the future ground isn't there. It remains in the other section views. How do I add it back?

View 1 Replies View Related

AutoCAD Civil 3D :: Profile View Empty Or Missing - Cave-in - Section View

Nov 28, 2012

1. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?

2. How can I best come up with the right volume to fill.  

3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet) 

4. How to I render a rock fill in this cave-in.  

The attached aerial image , has survey or cogo points  that are imported to surface, to become surface points. . So I wanted to create a surface profile  below  and an outline of  fill  above it.  Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment. 

But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not)  is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area. 

The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1

View 5 Replies View Related

AutoCAD Civil 3D :: How To Create A Section View For A Pond Other Than Quick View

Oct 1, 2012

how to create a section view for a pond other than quick view.

View 2 Replies View Related

AutoCAD VB :: Script To Apply Template To Multiple Drawing

Jan 12, 2011

i have a standard template(page layout) DWT file, that i need to apply into multiple drawings. is it possible to create a scipt for that cause  i have 100 dwg that already has a template that i need to replace by the new one.

heres a script that doesn't work:

(entdel (entlast))

View 5 Replies View Related

AutoCAD .NET :: How To Find Section View Names From Drawing

May 14, 2013

I need to change the section view name height..I can able to collect all the text and also able to change the height. But only for the view names i need to change the height. Im using COM API...

Here is my code.

//why i used 3 here is ,because section view name strings  will be like" A-A"

//im also try to assign color for the view name
if (acadText.EntityName.Length.Equals(3))
acadText.Height = 6.0;
AcadAcCmColor sectionViewTextColor = acadText.TrueColor;
sectionViewTextColor.ColorIndex = AcColor.acMagenta;
acadText.TrueColor = sectionViewTextColor;

View 2 Replies View Related

AutoCAD 2013 :: Copy Multiple Layout From Existing Drawing To New Template

Jul 12, 2012

I have an exisitng drawing with 80+ layouts tabs that I would like to copy to a new template drawing.

I tried to use design center but to no avail.

How can I do this?

Running Windows 7 Pro
3.20 GHz
12GB Ram
AutoCad 2013 64bit

View 2 Replies View Related

AutoCAD Inventor :: Section 3d Drawing Into Multiple 3d Prints

Jul 4, 2013

I'm trying to 3d print an ABS mold of an 80" long by 6 inch high object.  I can't figure out how to section my model into the multiple 6" sections, though I know I'll need 14 roughly the same size sections.  

View 4 Replies View Related

AutoCAD Inventor :: 2013 - Section View Preview As Uncut In Drawing

Jul 12, 2012

I've just started to do some work with Inventor 2013 and I noticed that, when creating a section view in a drawing, the preview is always uncut and shaded. Even when creating a partial section, the preview shows the full, shaded assembly. I tried playing with the "Section View Preview as Uncut" setting in Application Options, but this doesn't seem to do anything.

View 2 Replies View Related

AutoCAD Inventor :: Custom / User Properties In View Label Of Drawing Template / Style Library

Apr 18, 2012

Is there a way that we can set the view label in the style library to show custom/user Properties?

We have set our iam/ipt templates to have some custom properties which we wish to display in the view label when the view is created however there this no way to add these properties to the label.

I find this a little strange as you can add these user Properties to the parts list in the style library? (I've added some screen caps to show what I am talking about)

View 8 Replies View Related

AutoCAD Inventor :: Option In Drawing Mode To Exclude Parts From Section View

Feb 1, 2012

Is there an option in drawing mode to exclude certain parts from a section view.

According to ASME Y14.3 parts such as shafts, keys bolts and nuts should be excluded in sectional view. Its not just removing the Hatching, the part has to show completely.

The closest I found in Inventor is that you can exclude Standard parts from being sectioned. Some of my parts are not in the standard library.

I would like to have the option to choose which parts I want to section and which ones I don't.

View 9 Replies View Related

AutoCAD Civil 3D :: Section View Style

Jul 27, 2010

We have a project where the alignment is not in the center of the section (it's along one edge of the project), but we want the Title Annotation ("STA. 165+00") to show up in the center of the sections.

If you choose "Center" justification in the style, it "centers" it about the zero offset, which in our case is actually the left side.

Is there any way to truly center this call, short of turning it OFF and manually creating separate labels?

Unfortunately, I can't use "Center" and give it a "Y" offset, because the alignment does vary slightly (±30 feet) within these 250' cross sections - which would cause the label to vary by that much also...

View 2 Replies View Related

AutoCAD Civil 3D :: Get Alignment ID From Section View?

Nov 28, 2013

With ProfileView I can get Alignment Id.
pv= trans.GetObject(entRes.ObjectId, OpenMode.ForRead) as ProfileView; ObjectId idAlin = pv.AlignmentId;

 Now, I want to do  the same but  for SectionView.
sv= trans.GetObject(entRes.ObjectId, OpenMode.ForRead) as SectionView;
 but there isn´t :          sv.AlignmentId;

Are there any ways to get Sample Line Group Id from section view either section view name  or id?

I would like to get station value from selected section view by pick too.

Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit

View 7 Replies View Related

AutoCAD Civil 3D :: Extracting XYZ From Section View

Jul 27, 2013

is it possible to export the position and elevation of points plotted in a section view to a csv or txt file?  I have a surface with section profiles cut every 100 feet or so, and would like an external copy of just the data used to plot the section views to use for another analysis.  

View 9 Replies View Related

AutoCAD Civil 3D :: Section View Properties

Dec 9, 2011

I'm trying to get rid of the section centerline (red) and magenta circle (shown in the attached image) that persistently show up only in 1 of 10 sections generated via sample lines along an alignment. How to get rid of them?

View 3 Replies View Related

AutoCAD Civil 3D :: Section Editor View

Mar 27, 2013

When I click view extents in section editor it zoomes to my assembly. WHen I go to my next station, it zooms out to ridiculous values. How can this be set so I can do some work? I want to view my assembly and a few feet extra left/right/above/below. 

Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post

View 4 Replies View Related

AutoCAD Civil 3D :: How To Set More Bands In Section View

May 31, 2012

I have a problem to set more bands in section view.

Normaly I word with 3 bands (existing elevations, designed elevations and the distances between them), but now I need another 2 bands:

1) is the diference between the top surface of the coridor and the existing surface

2) is the diference between the bottom surface coridor and the existing surface

I want ot ask maybe there is a setting to not let me make more bands?

In fact I make the 2 more bands but the Civil 3D 2012 and 2013 is not giveing me the data in these bands.

I uplloaded a picture for example to be more clear.

View 3 Replies View Related

AutoCAD Civil 3D :: Long Section View

May 11, 2012

I am working on a drawing for the COE.  They require that the horizontal scale is 1"=20 feet for cross sections.  Unfortunately the sections that I need to cut are so long that they don't fit on the page.  Currently I am creating multiple viewports in paper space and creating split section views in that way but it is starting to get out of hand.

Any better way to handle sections that won't fit on a page?  I can't change the scale.

View 2 Replies View Related

AutoCAD Civil 3D :: X Section Plot View?

Aug 31, 2012

I am trying to plot all my cross sections in a drawing, but I whant them in a vertical line.  It seems that I can only plot in a horizontal line on sheets.

View 4 Replies View Related

AutoCAD Civil 3D :: Section View Labels

Aug 16, 2012

Is there anyway to create a section view label where you input the offset and elevation data into a section view similar to a station & elevation label for a profile view (see Station-Elevation attached)?  Out-of-the Box section view offset elevation labels can only be placed on the section view and dragged to a specified offset & elevation.

View 1 Replies View Related

AutoCAD Civil 3D :: Different Hatch On Section View?

Jun 10, 2013

how can I have diferent hatch on the section view, one when I have cut and another when I have fill.

seet attached.

View 2 Replies View Related

AutoCAD Civil 3D :: Setting Min And Max Of Section View

Mar 8, 2012

How to set (not to get) maximum or minimum elevation of a grid of specific section view in COM API c++?

or Just tell me the name of the function in COM API c++?

View 3 Replies View Related

Copyrights 2005-15, All rights reserved