AutoCAD Inventor :: 2013 - Section View Preview As Uncut In Drawing

Jul 12, 2012

I've just started to do some work with Inventor 2013 and I noticed that, when creating a section view in a drawing, the preview is always uncut and shaded. Even when creating a partial section, the preview shows the full, shaded assembly. I tried playing with the "Section View Preview as Uncut" setting in Application Options, but this doesn't seem to do anything.

View 2 Replies


AutoCAD Inventor :: 2013 - Drawing View Is Missing But Preview Shows It

Oct 31, 2012

I have a drawing that I created (.dwg) in Inventor 2013 that, when opened, is completely blank.  However, when in the File>Open dialog box, I can click on the name of the drawing and the preview shows the complete drawing with all views fully dimensioned.  I closed Inventor, laucned AutoCAD and tried opening the same file and it was still blank (no views).  I then closed that file and open the old version of the file from the, "OldVersions" folder with Autocad and all the views and dimensions were there.

So I launced Inventor again and reopened the offending print and noticed that the model is not shown in the drawing's model tree.  I'm 100% positive that I did not delete this model/view from the drawing before saving the file.  This is a small drawing and it will only take me a few mintues to recreate it.

I'm using Inventor 2013, SP1.1

Windows 7 64 Bit
Dell M6600
Nvidia Quadro 5010M

View 4 Replies View Related

AutoCAD Inventor :: Parent Section View In One Drawing And Child View In Another

May 6, 2013

Is it possible to have the parent view for the section in one drawing and the child views in another drawing?

View 2 Replies View Related

AutoCAD Inventor :: Option In Drawing Mode To Exclude Parts From Section View

Feb 1, 2012

Is there an option in drawing mode to exclude certain parts from a section view.

According to ASME Y14.3 parts such as shafts, keys bolts and nuts should be excluded in sectional view. Its not just removing the Hatching, the part has to show completely.

The closest I found in Inventor is that you can exclude Standard parts from being sectioned. Some of my parts are not in the standard library.

I would like to have the option to choose which parts I want to section and which ones I don't.

View 9 Replies View Related

AutoCAD Inventor :: 2013 - Cannot Export In Half Section View Mode

Jun 9, 2013

Cannot inspect, export pictures, constraint while in half section (or other) view mode...

View 6 Replies View Related

AutoCAD Civil 3D :: Road Section View Grid Too Thick In Preview

May 12, 2012

I already check the setting layer assignment with color and linetype all bylayer using the office ctb BUT during preview in plotting it shows too thick. What do I miss to check or do?

View 2 Replies View Related

AutoCAD 2013 :: Section View From Base View

Apr 4, 2012

When making a Section view from a Base View is there a setting to make the text follow the Text Style and Paperspace text size. Everytime I create a Section View I have to change the text settings in the Properties box.

View 3 Replies View Related

AutoCAD Inventor :: Incorrect Radial Section View - Section Participation None

Sep 24, 2012

The section view behaves strangely with the ‘section participation: none’ components

Invertor2012 sp2
Win7 x64

View 6 Replies View Related

AutoCAD Inventor :: Section View Not Parallel With Section Line?

Nov 19, 2011

why my section is not parallel with my section line. I did constrain my section line in the section line sketch.

View 2 Replies View Related

AutoCAD Inventor :: 2013 Drawing / Using Item Number As Base View Name

Aug 7, 2013

At my company, we do a large amount of work with sheet metal parts and assemblies. On our drawings, we like to do "detail" views of the flat patterns of each part of the assembly. Basically, how we do it now is insert a base view of the assembly and the BOM onto the first sheet and then on separate sheets, we place base views of the flat patterns for each of the components that will be cut on our cnc plasma table. We use the item number to denote which part it is in the assembly. Is there any way to pull the item number from the assembly BOM and use it as a parameter that can be inserted into the view label? Right now, it's a nightmare if the assembly BOM is modified because we have to go back in to each view label and manually change the item number.

View 5 Replies View Related

AutoCAD .NET :: How To Find Section View Names From Drawing

May 14, 2013

I need to change the section view name height..I can able to collect all the text and also able to change the height. But only for the view names i need to change the height. Im using COM API...

Here is my code.

//why i used 3 here is ,because section view name strings  will be like" A-A"

//im also try to assign color for the view name
if (acadText.EntityName.Length.Equals(3))
acadText.Height = 6.0;
AcadAcCmColor sectionViewTextColor = acadText.TrueColor;
sectionViewTextColor.ColorIndex = AcColor.acMagenta;
acadText.TrueColor = sectionViewTextColor;

View 2 Replies View Related

AutoCAD Inventor :: Showing Section View In Base View

Dec 13, 2012

how to show section view in base view with out projection the component.

View 2 Replies View Related

AutoCAD Inventor :: How To Make Section View As Isometric View

Oct 29, 2013

I have a long shaft with parts mounted on. i want to section it and show the parts. i don't need to show the whole length of the shaft.

I know i can crop the isometric view, but this way i will not see the key hole which is on the other side, it's hidden.

If i make a section it 's in an orthogonal view only.

I want to make the section view, but later to transform the sectioned view to an isometry. is it possible?

View 7 Replies View Related

AutoCAD Inventor :: Way To Save A Section View In Assembly As View Rep

Mar 13, 2013

Is there a way to save a section view in the assembly as a view rep? Am using 2011.

View 9 Replies View Related

AutoCAD Civil 3D :: Unable To See Drawing On Preview View

Jun 4, 2013

I can't see the drawing on a preview view when I am trying to open some existing drawing with Autocad Civil 3D 2013.

View 7 Replies View Related

AutoCAD Inventor :: Cut Section / Different View Style In Same View?

Nov 12, 2013

It's possible to do a cut view with the cup part with a different view style  from the other "not Cut" half.

I achieve that, whit the cut view + normal view croped  hover the cut view... but this isn´t a accurate process...

Autodesk Factory Design Suite Ultimate 2014
Autodesk Simulation Mechanical
Autodesk Simulation CFD
Windows 7

View 5 Replies View Related

AutoCAD Inventor :: Section View As Master View

Aug 26, 2013

I place the first view in a drawing and want to be sectioned.

Is there a way to do that, since when i mark the section line, another view is created.

Or should i put the main view outside of the paper boundaries?

View 7 Replies View Related

AutoCAD 2013 :: 2014 - Broken Section View?

Oct 22, 2013

Is there any tool in AutoCAD 2014 to obtain broken section view (generated from a base view in a layout?I have some very long section views and just can't find a way to shorten them...

View 2 Replies View Related

AutoCAD Civil 3D :: Drawing Template For Multiple Section View Production

Feb 21, 2012

How can I create a dwt file for the production of multiple section views sheets in A3 format and 1/200  ?

Civil 3D Section .dwt (Template/plan production) has only layouts for A0 and A1 plan and scales 1/500 - 1/1000 and 1/5000. I tried to change the format to A3 and scale to 1/200 of one of those layouts in the set up manager but didn't get a good result while producing section sheets.

View 2 Replies View Related

AutoCAD 2013 :: Make Section Views From Parent View

Jan 16, 2013

I am trying to make section views from the parent view.  I need to make several section view, but there is not enough room on one sheet for all of them.  Is there a way to move or copy the section views to different sheets and keep the connection for when chages are made all views will update?  

Using AutoCAD 2013

View 9 Replies View Related

AutoCAD Civil 3D :: Adjustment Of Section View Data Bands 2013?

Jan 14, 2013

I have many section views of a road where I want to calculate ground volumes. I have a curb in a section view and I want that Civil showed me just an elevation at the top of the curb and at the top of the road cover. Is it possible to do that? And also distances: I want that Civil just show me a distance from the center of a road to a curb and from a curb to the edge of the road.

View 2 Replies View Related

AutoCAD Civil 3D :: 2012 / 2013 - Flared End Section Depiction In Profile View

Apr 24, 2012

Any new methods for depicting flared end sections in profile views in Civil 3D 2013 or 2012? I just loaded Civil 3D 2013 last week and have been checking to see if flared end section depiction in profile views is any better than previous versions.  I haven't noticed anything different.   I'm I the only one wanting a easier way to depict flared end sections in profiles? In short, I have never been able to figure it out. 

View 1 Replies View Related

AutoCAD Civil 3D :: Opening Drawing In 2013 And Drawing View Changes?

Nov 28, 2012

Recently upgraded to Civil 3D 2013 and drawings opened up fine.  Now today any drawing that opens shows the plan view as last saved but then after loading takes the drawing and shifts it into a 3d view similar to a crossection.  Is there a setting somewhere that has been changed?  I noticed after a windows 7 update was preformed. 

View 7 Replies View Related

AutoCAD 2013 :: Section Drawing - Layers Invisible

May 9, 2013

I have been working on a detailed section drawing in AutoCad 2013

I saved the file in different files as i gone along, I have been trying to open the file everytime i do all the layers are there but only two are visible all the other seem to be invissible.

I tried it with each file on different computers, same version of AutoCad no success.

It apears that in the preview before opening the file it is all there but when actually opening the file its only a random two layers that come up, missing around 10 others which have the majority of the drawing /details on there.

I tried the unhide, changing line weights in the layer menu, opening the back ups. is there anything else I can try.

View 9 Replies View Related

AutoCAD 2013 :: Drawing Of 8.5MB Appears On Preview And Opens With Nothing Inside

Dec 15, 2013

A drawing of 8.5MB appears on the preview and opens with nothing inside,This is the second time I’m reporting this issue regarding dwg files that appears on the preview but open improperly.

part of the dwg file is shown through the preview window but when open, nothing is found inside.

Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.

View 9 Replies View Related

AutoCAD 2013 :: While Drawing Shapes The Preview Of Shape Is Missing

Dec 9, 2013

One of my students managed to make previews of the objects dissapear while drawing and editing.

Ex: Making a circle, only the radius line shows up, no preview of the circle itself.  

View 7 Replies View Related

AutoCAD Civil 3D :: Making Cross Section Drawing For Gravel Piles (2013)

Jul 3, 2012

My problem now is that i have piles of gravel & sand, i got the volume on each pile for and now want to make a cross section drawing showing the elevations on them. I went to section views and create mutiple views but it asks me for a aligment, but i just want to base the drawing off the contours of the piles (elevations)

View 5 Replies View Related

AutoCAD Inventor :: Section View From Sketch

Oct 6, 2011

I need an urgent solution to my issue.I have created section view from a sketch (a line constrained to the projection of a work plane) from my derived part to my drawing using the "Get model sketches ". When i update the iassembly and update the the view using model state the view tries to update but throws an error see attached document.When i delete the section line and create a section line manually ie. by creating a normal sketch in the drawing the same model gets updated without any error.

View 6 Replies View Related

AutoCAD Inventor :: IDW Section View Hatching?

Jun 11, 2013

When creating a section view in 2014, the new view now comes bordered by a large box that is hatched.  I can hide the borders (4 separate lines) and the hatch but cannot change the size of the view border. I don't remember this from 2011.

View 3 Replies View Related

AutoCAD Inventor :: Section View Of A 3d Model?

Apr 28, 2011

I was wondering in inventor 2010 how to create a  3d model section view of a 3d model assembly or if its even possible. 

View 5 Replies View Related

AutoCAD Inventor :: Incomplete Section View

Feb 14, 2013

I am trying to produce a section view of a vessel. Inventor makes the section just fine except it is incomplete. See images below:

In the past when I have encountered this issue I would simply locate the part in the browser, Right click on it + Section Participation + section. That usually solves the issue. This time it is not working.

View 2 Replies View Related

Copyrights 2005-15, All rights reserved