AutoCAD Civil 3D :: Unable To See Drawing On Preview View

Jun 4, 2013

I can't see the drawing on a preview view when I am trying to open some existing drawing with Autocad Civil 3D 2013.

View 7 Replies


AutoCAD Inventor :: 2013 - Section View Preview As Uncut In Drawing

Jul 12, 2012

I've just started to do some work with Inventor 2013 and I noticed that, when creating a section view in a drawing, the preview is always uncut and shaded. Even when creating a partial section, the preview shows the full, shaded assembly. I tried playing with the "Section View Preview as Uncut" setting in Application Options, but this doesn't seem to do anything.

View 2 Replies View Related

AutoCAD Inventor :: 2013 - Drawing View Is Missing But Preview Shows It

Oct 31, 2012

I have a drawing that I created (.dwg) in Inventor 2013 that, when opened, is completely blank.  However, when in the File>Open dialog box, I can click on the name of the drawing and the preview shows the complete drawing with all views fully dimensioned.  I closed Inventor, laucned AutoCAD and tried opening the same file and it was still blank (no views).  I then closed that file and open the old version of the file from the, "OldVersions" folder with Autocad and all the views and dimensions were there.

So I launced Inventor again and reopened the offending print and noticed that the model is not shown in the drawing's model tree.  I'm 100% positive that I did not delete this model/view from the drawing before saving the file.  This is a small drawing and it will only take me a few mintues to recreate it.

I'm using Inventor 2013, SP1.1

Windows 7 64 Bit
Dell M6600
Nvidia Quadro 5010M

View 4 Replies View Related

Lightroom :: Unable To View Preview Files In Import Window

Mar 20, 2013

Lr 4.3 ACR 7.3 - unable to view preview files in the import window and/or raw files in the Library?
When will this camera be supported?

View 5 Replies View Related

AutoCad :: Can't Zoom In / Unable To View Drawing

Nov 13, 2011

I can't zoom in on the autocad these drawing coordinates are 8.00E+39,0000 -7.00E+39,000...i can't saw my drawing.

View 1 Replies View Related

AutoCAD Civil 3D :: Road Section View Grid Too Thick In Preview

May 12, 2012

I already check the setting layer assignment with color and linetype all bylayer using the office ctb BUT during preview in plotting it shows too thick. What do I miss to check or do?

View 2 Replies View Related

AutoCAD Civil 3D :: Opening Drawing In 2013 And Drawing View Changes?

Nov 28, 2012

Recently upgraded to Civil 3D 2013 and drawings opened up fine.  Now today any drawing that opens shows the plan view as last saved but then after loading takes the drawing and shifts it into a 3d view similar to a crossection.  Is there a setting somewhere that has been changed?  I noticed after a windows 7 update was preformed. 

View 7 Replies View Related

AutoCAD Civil 3D :: Unable To See Super Elevation On Section View

Apr 30, 2013

I have created the super elevation to my road as you can see on the attached picture, but I can't see the super elevation on my section view.

See attached.

View 5 Replies View Related

AutoCAD Civil 3D :: Unable To Get Back To Regular View From Corridor Section

Aug 31, 2012

Edited a corridor section.  Hit some button (not sure what) now I can't get back to my regular view.  If I select the "Top" view, now all that shows up is one contour, and the top of one cross section, like it's only showing stuff that is at one elevation.

View 1 Replies View Related

AutoCAD Civil 3D :: Rotating View Of A Drawing

Oct 10, 2012

My company has just upgraded from stone age AutoCAD to Civil3d 2013 and I've been tasked with figuring out the program.

What I am trying to do is realign my drawing so a line I drew is horizontal to the page. For example, I have a line at a 45 degree angle and I want to rotate my viewport so that line is now at a 0 degree angle. Is there a simple way to do this?

A follow up: I have my point labels set to be a 45 degree angle, will they be at a 45 degree angle when I realign the drawing or will they "rotate" along with the drawing?

View 9 Replies View Related

AutoCAD Civil 3D :: Drawing Initial View

Jun 5, 2012

When opening a drawing, since I've installed 2013, I don't have an initial view or preview of the drawings I'm selecting.  In the open box, the "Initial View" or "Select initial view is unchecked and won't let me put a check mark in so I can review the drawing before opening.

View 9 Replies View Related

AutoCAD Civil 3D :: Polyline Drawing - Orbit View

Apr 18, 2012

I have an existing drawing with 3D polylines, I try to orbit to veiw it in a different view and all i get is a line.

View 3 Replies View Related

AutoCAD Civil 3D :: Unable To Reference Vaulted File In Drawing

Oct 15, 2012

We are using Autocad Civil 3D 2010 and are also using the 2010 Vault.

We are having problems with one project in Civil 3D (project in Vault). We are trying to create a surface reference and are getting the error: "Drawing is already attached to project X."

Note: This drawing is not vaulted, only the cross section surface that has the final grade surface in it is vaulted.

When we test the same process with a new document we are able to reference the surface fine and the command shows: _AeccCreateSurfaceReference which works properly.

View 1 Replies View Related

AutoCAD Civil 3D :: Drawing Template For Multiple Section View Production

Feb 21, 2012

How can I create a dwt file for the production of multiple section views sheets in A3 format and 1/200  ?

Civil 3D Section .dwt (Template/plan production) has only layouts for A0 and A1 plan and scales 1/500 - 1/1000 and 1/5000. I tried to change the format to A3 and scale to 1/200 of one of those layouts in the set up manager but didn't get a good result while producing section sheets.

View 2 Replies View Related

AutoCAD Civil 3D :: Copying Profile View / Object Style From One Drawing To Another

May 20, 2013

How can I copy a profile view style from one drawing to another? I can't seem to locate the ones I created in toolspace to be able to drag them from one drawing to another.

View 2 Replies View Related

AutoCAD Inventor :: Unable To Remove Hidden Line From View To Get Shaded View

Sep 23, 2013

I made  a drawing, but after using ilogic (ilogic is in drawing,assembly, part) in it, drawing view of a particular part is coming in hidden line, other are shaded as u can see in image.

Drawing view is associative, all edges shown, level of detail is master, view style is Hidden Line Removal with Shaded

Computer Config:

Inventor 2013
Intel Xeon CPU
2.67 GHZ
8 Gb ram
Windows 7 64 bit

View 3 Replies View Related

AutoCAD Inventor :: Parent Section View In One Drawing And Child View In Another

May 6, 2013

Is it possible to have the parent view for the section in one drawing and the child views in another drawing?

View 2 Replies View Related

AutoCAD Inventor :: Projected Drawing View Doesn't Show / Design View Rep Don't Update

Sep 27, 2013

After upgrading to Inventor 2014 we notice that the graphics do not work properly, and that the overall performance in drawings and modelling bad compared to 2013. Then we installed SP1 and now drawing views are disappearing, however when we select "shaded" view the view reappears and works perfectly..

Any workaround regarding disappearing views?

View 3 Replies View Related

AutoCAD Inventor :: View Label In Base View / Drawing?

Nov 25, 2008

Each time when I place a part in base view, have to follow few steps; go through view label, format Text, than choose type option - [Properties-Model] and its property - [Part Number], than placing dimensions. it takes long time and very repetitive, especially, when placing a hundreds of parts and I was wondering if there is an option, to set up view label; [Properties - Model ]& [Part number], as a DEFAULT. So, each time placing a part, in base view it will come up with correct label. Also, overall dimensions, can it be retrieve using parameters of the part?

View 4 Replies View Related

AutoCad :: Architectural Drawing - Levels Show In Model View But Not In Drawing?

Sep 14, 2011

The layer is on and the ground levels on the architectural drawing in model view show the number and the box surrounding them however in the drawing window be it in the numbers have dissapeared and we are left with only the boxes ?

View 3 Replies View Related

AutoCAD Civil 3D :: Mark Items In Alignment View To Display In Profile View?

Dec 20, 2012

I was wondering if after drawing an alignment, creating a profile, and profile view, is there a way I can mark items along the alignment so they could show up in the profile view.  I am laying out a pipeline and want to have the profile display a marker for items such as tees, elbows, reducers and other items.  The marker I would like to use will be something like the vertical style grade break markers.

Also on a side note, as each of these items will have a different name, is there a way that I can add these markers and then have each one with a unique name?

View 9 Replies View Related

AutoCAD Civil 3D :: Profile View Empty Or Missing - Cave-in - Section View

Nov 28, 2012

1. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?

2. How can I best come up with the right volume to fill.  

3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet) 

4. How to I render a rock fill in this cave-in.  

The attached aerial image , has survey or cogo points  that are imported to surface, to become surface points. . So I wanted to create a surface profile  below  and an outline of  fill  above it.  Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment. 

But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not)  is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area. 

The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1

View 5 Replies View Related

AutoCAD Civil 3D :: 2013 / Changing TOP View To TOP-Front View For 2 Overlapped Points

Sep 23, 2013

I created 8 points (4 locations with 2 depths in each location) in the DWG of my AutoCAD Civil 3D 2013 project. I grouped these 8 points into 2 Point Groups: Point Group 1-high depth has Points #1, #3, #5, #7, and Point Group 2-low depth has #2, #4, #6, #8. I changed the 2D Wireframe to 3D Wireframe and on TOP view I saw Point Group 1 is on the top of Point Group 2 (because the 2 Point Groups have the same values of X- and Y-coordinates with different Z(elevation) value - see the first attached file. How can I change the TOP view to the TOP-FRONT view by using some Command to get this fixed TOP-Front view thar has the good separation of the 2 depths as shown in the second attached file? 

View 7 Replies View Related

AutoCAD Civil 3D :: How To Create A Section View For A Pond Other Than Quick View

Oct 1, 2012

how to create a section view for a pond other than quick view.

View 2 Replies View Related

AutoCAD Civil 3D :: How To Choose Right Templates / View Ports / View Frames

Aug 26, 2013

I have been creating directly the DWG of AutoCAD Civil 3D 2013 for a couple of months.I created a project for the 8 points (4 locations with 2 depths in each location - i. e. same XY-coordinates, but different Z) And I just cannot separate the  2 "depth" points of the "same XY-coordinates" location in the 3D Wireframe by using the 3D Rotation Cube. I wonder I should start the C3D 2013 with choosing the right Template, configuring proper Viewports and creating suitable View Frames. I don't know what Template is right for my project of the 2 "depth" points of the same location in the 3D Wireframe of C3D 2013 - see the attached file.  what Template (.dwt) is right for my project, how to cofigure 2 or 3 Viewports, and create the View Frames.

View 1 Replies View Related

AutoCAD Civil 3D :: Working Back And Forth From Plan View And Profile View

Jan 18, 2013

I was given a horizontal centerline of a 5 mile bike path. We have to stake all the even stationing every 50 feet and all the VPC's and VPT's with vertical elevation. I have created the horizontal profile and also the vertical profile including all the vertical curve information. Is there an easy way to incorporate the elevation information back into the plan view so I can create points that carry x,y & z points that I can transfer out of autocad as a .txt file so we can upload it on our gps equipment?

View 9 Replies View Related

AutoCAD Civil 3D :: Add An Object From A Profile View To A Plan View

May 29, 2013

Is there a way to easily add an object from a profile view to a plan view? I have developed a pipeline profile that has high and low points and I would like to show these points on the plan views.

View 9 Replies View Related

AutoCAD Inventor :: Drawing Views Are Currently Draft Preview

May 10, 2011

I've been using Inventor for a few years now and haven't seen this. It created a base view with green marks and when I go to print it says

"One or more drawing views are currently draft previews. Draft previews differ from final views in quality and may produce visually different results. Would you like to wait for views to update before printing or smash the screen from irritation of having a new roadblock thrown in your way that we make no effort to remove for you? HAHA you ignorant fool you will never learn all the idiosyncrasies of our product".

Which I thought was a bit unnecessary.

It does make some effort actually. It sits there with a progress bar. This drawing is about as simple as I create and it can't get past the progress bar. If I print anyway, there is no line weight. So where is this little switch hidden to turn this off? I've already fiddled with background updates and the sunglasses are not checked and grayed out. I don't know how I never ran across this problem before or what could have changed. Given the performance of my computer, I don't think I need some low grade preview for drawings of this type.

View 9 Replies View Related

AutoCad :: Drawing In Viewport Not Visible In Plot Preview?

Apr 19, 2012

I'm creating a new project drawing and have x-ref'd my base drawing onto the sheet to be plotted. I can see the base drawing thru the viewport while in layout, but once I try and preview my plot the drawing inside the viewport is not visible. that is, I can see the preview of my sheet border & title block, but nothing within the viewport shows on the preview screen.

View 3 Replies View Related

After Effects :: Unable To Play Ram Preview

Oct 29, 2013

I cannot play the ram preview, when I click the button the image gets flipped and frozen.  I can scrub the timeline and see the animation I am working on, but I need a real-time preview.  I downloaded the last after effects patch for mavericks, but I think this is an issue with the Iris Pro graphics card. 

View 5 Replies View Related

AutoCAD 2013 :: Drawing Of 8.5MB Appears On Preview And Opens With Nothing Inside

Dec 15, 2013

A drawing of 8.5MB appears on the preview and opens with nothing inside,This is the second time I’m reporting this issue regarding dwg files that appears on the preview but open improperly.

part of the dwg file is shown through the preview window but when open, nothing is found inside.

Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.

View 9 Replies View Related

Copyrights 2005-15, All rights reserved