AutoCAD .NET :: How To Find Section View Names From Drawing

May 14, 2013

I need to change the section view name height..I can able to collect all the text and also able to change the height. But only for the view names i need to change the height. Im using COM API...

Here is my code.

//why i used 3 here is ,because section view name strings  will be like" A-A"

//im also try to assign color for the view name
if (acadText.EntityName.Length.Equals(3))
{
acadText.Height = 6.0;
AcadAcCmColor sectionViewTextColor = acadText.TrueColor;
sectionViewTextColor.ColorIndex = AcColor.acMagenta;
acadText.TrueColor = sectionViewTextColor;
acadText.update();
}

View 2 Replies


ADVERTISEMENT

AutoCad 2D :: Find And Replace Tab Names In One Drawing File?

Dec 19, 2013

is there a way of find and replace tab names in one drawing file? one file with six tabs named 001 rev A, 002 rev A etc. i would like to change all the "rev A" to "rev 0" with out going into each tab seperatly and changing them.

View 2 Replies View Related

AutoCAD Inventor :: Parent Section View In One Drawing And Child View In Another

May 6, 2013

Is it possible to have the parent view for the section in one drawing and the child views in another drawing?

View 2 Replies View Related

AutoCAD Inventor :: 2013 - Section View Preview As Uncut In Drawing

Jul 12, 2012

I've just started to do some work with Inventor 2013 and I noticed that, when creating a section view in a drawing, the preview is always uncut and shaded. Even when creating a partial section, the preview shows the full, shaded assembly. I tried playing with the "Section View Preview as Uncut" setting in Application Options, but this doesn't seem to do anything.

View 2 Replies View Related

AutoCAD Civil 3D :: Drawing Template For Multiple Section View Production

Feb 21, 2012

How can I create a dwt file for the production of multiple section views sheets in A3 format and 1/200  ?

Civil 3D Section .dwt (Template/plan production) has only layouts for A0 and A1 plan and scales 1/500 - 1/1000 and 1/5000. I tried to change the format to A3 and scale to 1/200 of one of those layouts in the set up manager but didn't get a good result while producing section sheets.

View 2 Replies View Related

AutoCAD Inventor :: Option In Drawing Mode To Exclude Parts From Section View

Feb 1, 2012

Is there an option in drawing mode to exclude certain parts from a section view.

According to ASME Y14.3 parts such as shafts, keys bolts and nuts should be excluded in sectional view. Its not just removing the Hatching, the part has to show completely.

The closest I found in Inventor is that you can exclude Standard parts from being sectioned. Some of my parts are not in the standard library.

I would like to have the option to choose which parts I want to section and which ones I don't.

View 9 Replies View Related

AutoCAD Civil 3D :: Adding Cross Section To Section View Group?

Jul 17, 2013

Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?

C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit

View 9 Replies View Related

AutoCAD Inventor :: Incorrect Radial Section View - Section Participation None

Sep 24, 2012

The section view behaves strangely with the ‘section participation: none’ components

Invertor2012 sp2
Win7 x64

View 6 Replies View Related

AutoCAD Inventor :: Section View Not Parallel With Section Line?

Nov 19, 2011

why my section is not parallel with my section line. I did constrain my section line in the section line sketch.

View 2 Replies View Related

AutoCAD Civil 3D :: Section / Section View Of A 3dpolyline Along The 3d Polyline

Oct 12, 2012

I am working in Civil3d and have a 3d polyline that i want to generate a 2d section line of i.e the path of the section plane is along the 3d line

View 1 Replies View Related

AutoCAD Architecture :: How To Cut A Section And Create A Section View

Nov 3, 2012

So, I we were taught autocad at hour school but not autocad architecture because apparently autocad architecture is too "advanced" for us.  so now I need to draw window details (thermally broken aluminum frame window with insulating glass unit) but it is so much work in autocad however I was told that I can just draw a window in autocad architecture and just cut a section and just make a few adjustments to get the window detail.

View 6 Replies View Related

AutoCAD Civil 3D :: Unidentified Section In Section View

Nov 8, 2012

I am having an issue when producing a section view with my corridor.  I have a corridor and corridor surface, as well as an existing ground surface.  I create a sample line group and sample EG, Corridor Surface, and Material.  When I produce a section view I get 4 sections in the view: EG, Corridor Surface(with the corridor surface naming convention), and an additional section simply called "Corridor Surface". 

This last section is strange in that it seems to be using the correct assembly, but not targeting the correct features.  Also it has grips at all of the vertices which I havent seen before.

And the strangest part, when I click on properties for this section and go to section data, the columns for Description and Data Source are blank.

If there is no data source, then where is this section coming from, and why is it showing up when I did not specify that it be created.  This is a real mind boggler to me and makes no sense.  Screenshot attached.

View 5 Replies View Related

AutoCAD Civil 3D :: Section View Properties - Section Tab?

Oct 16, 2012

My future ground somehow disappeared out of one section view in my group. Under the section tabs I still have my existing ground and pipenetwork but the future ground isn't there. It remains in the other section views. How do I add it back?

View 1 Replies View Related

AutoCAD Civil 3D :: Find And Replace For Style Names?

Sep 17, 2012

quick and easy way to rename all the Styles in a .dwg or .dwt? 

I want to replace a current prefix "HCS - *" with "HE - *" to all styles in a prototype file.

Civil 3D 2013

View 2 Replies View Related

AutoCAD Inventor :: How To Find Names Of Hardware (or In Content Center)

Dec 19, 2012

I have a project that has all sorts of Hardware. What is the best way to find out there names?

(thy are not named in the project)

Attached is some images of the hardware i have got.

View 5 Replies View Related

AutoCAD Civil 3D :: Profile View Empty Or Missing - Cave-in - Section View

Nov 28, 2012

1. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?

2. How can I best come up with the right volume to fill.  

3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet) 

4. How to I render a rock fill in this cave-in.  

The attached aerial image , has survey or cogo points  that are imported to surface, to become surface points. . So I wanted to create a surface profile  below  and an outline of  fill  above it.  Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment. 

But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not)  is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area. 

The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1

View 5 Replies View Related

AutoCAD Civil 3D :: How To Create A Section View For A Pond Other Than Quick View

Oct 1, 2012

how to create a section view for a pond other than quick view.

View 2 Replies View Related

AutoCAD Inventor :: Showing Section View In Base View

Dec 13, 2012

how to show section view in base view with out projection the component.

View 2 Replies View Related

AutoCAD Inventor :: How To Make Section View As Isometric View

Oct 29, 2013

I have a long shaft with parts mounted on. i want to section it and show the parts. i don't need to show the whole length of the shaft.

I know i can crop the isometric view, but this way i will not see the key hole which is on the other side, it's hidden.

If i make a section it 's in an orthogonal view only.

I want to make the section view, but later to transform the sectioned view to an isometry. is it possible?

View 7 Replies View Related

AutoCAD Inventor :: Way To Save A Section View In Assembly As View Rep

Mar 13, 2013

Is there a way to save a section view in the assembly as a view rep? Am using 2011.

View 9 Replies View Related

AutoCAD Inventor :: Cut Section / Different View Style In Same View?

Nov 12, 2013

It's possible to do a cut view with the cup part with a different view style  from the other "not Cut" half.

I achieve that, whit the cut view + normal view croped  hover the cut view... but this isn´t a accurate process...

Autodesk Factory Design Suite Ultimate 2014
Autodesk Simulation Mechanical
Autodesk Simulation CFD
Windows 7

View 5 Replies View Related

AutoCAD 2013 :: Section View From Base View

Apr 4, 2012

When making a Section view from a Base View is there a setting to make the text follow the Text Style and Paperspace text size. Everytime I create a Section View I have to change the text settings in the Properties box.

View 3 Replies View Related

AutoCAD Inventor :: Section View As Master View

Aug 26, 2013

I place the first view in a drawing and want to be sectioned.

Is there a way to do that, since when i mark the section line, another view is created.

Or should i put the main view outside of the paper boundaries?

View 7 Replies View Related

Illustrator Scripting :: Find And Replace Month Names?

Sep 4, 2013

I have a few eps files in which month-year format is written like May-12, June-13 etc. I want to change May to Mai, June to Juin etc.
 
Virender 
var myDoc = app.activeDocument;
for (i = 0; i < myDoc.textFrames.length; i++ )
{

[Code]....

View 4 Replies View Related

Illustrator Scripting :: Find And Replace Layer Names

Mar 19, 2013

Are there any scripts to find and replace layer names?
 
There is an excellent script available for Photoshop which allows you to not only replace words in layer names, but also insert words as Prefixes, Suffixes and Sequential Numbers. The illustrator version of this script only allows sequential numbering: It doesn't offer find and replacing of words.
 
Ideally, it would be great if there was something that could do multiple find and replaces in one go:

(E.g.
You have layers like this Car, Dog, Bat
You enter: car(Option1), dog(Option2), Bat(Option3)
Your layers then become: Option1, Option2, Option3).
)

View 12 Replies View Related

AutoCad 2D :: How To Get Same Block In A Drawing With Different Names

Dec 25, 2011

how to get same block in a drawing with different names????.

i tried if i rename it all blocks are changing???

View 1 Replies View Related

AutoCad :: How To Find Areas Of Stream Cross Section

Mar 13, 2012

I am using autocad to find areas of a stream cross section such that when we take a water height measurement of the stream in the field, we can easily get the area from a spreadsheet since the cross section of the stream at any height will be known (once I get done in AutoCAD).

To further illustrate my needs, I have attached a picture. I need all the seperate areas between the red lines (the red lines are equally spaced vertically and have lengths that go end to end to the edges of the stream).

I have been hatching between the red lines and taking the areas of each hatched object. However, this is a slow and tedious process.

Hatching is not the issue because I can hatch multiple objects at once using the create seperate hatch option.

What I need is a way to list all the hatched object's areas into a text file so that I can easily copy and paste them into an excel file. Even if it is not a nice and neat list, I can atleast use a find for "area" to get them into a nice list a little faster.

cross section for forum.jpg

View 2 Replies View Related

AutoCAD Inventor :: How To Find Cross Section Details In Assembly Level

Jun 27, 2012

How to find the cross section details like area and movement of inertia  at particular cross section

in( solid works there is a direct option select the section and select the face and click on the calculate automatically gives the are and movement of inertia etc in part and sassy level also) but in inventor in part level its possible but in an assembly level.

View 7 Replies View Related

AutoCAD VB :: Delete Blocks With Specific Names In Multi Layout Drawing

Apr 25, 2011

In autocad 2011 ... I am looking for some sample code to delete all blocks with specific names in a multi layout drawing.  There may be multiple blocks with the same name. 

This is what I have so far ... this code collects the objects and loops through the layouts and the blocks ... if it finds the text "REVBLK" in the block name ... I want it to delete the block ... it does delete some of them but not all of the blocks ...

Dim E1 As Object
Dim ATS As Variant
Dim EA As AcadAttributeReference
Dim objLayouts As AcadLayouts
Dim LayerNextNo As Integer
Set objLayouts = ThisDrawing.Layouts
LayerNextNo = ThisDrawing.ActiveLayout.TabOrder

[code]....

View 1 Replies View Related

AutoCad 2D :: How To Create Attribute - Drawing Floor Plan With Different Room Names

Jan 2, 2012

I know how to create a block and all that is fine, but looking for detailed simple lesson on how to create a Attribute. ( I guess thats what they are called). For instance, drawing a floor plan with different room names and etc, I know there is a way to make a circle or polygon, or square and then when it is inserted in the drawing, you just have to type the new name of the room, or the window symbol, or door number and etc.

By the way, I am using a student version of AutoCAD 2010. Also, if you could also add the keyboard shortcut alias's too would be a great deal.

View 2 Replies View Related

AutoCAD Civil 3D :: Plot File Names Don't Include Drawing Name / Only Layout Name

Mar 8, 2013

my plot file names don't include the drawing name, only the layout name. it used to include the drawing name. i must have changed something but i don't what.

Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved