I'm trying to 3d print an ABS mold of an 80" long by 6 inch high object. I can't figure out how to section my model into the multiple 6" sections, though I know I'll need 14 roughly the same size sections.
View 4 RepliesHow can I create a dwt file for the production of multiple section views sheets in A3 format and 1/200 ?
Civil 3D Section .dwt (Template/plan production) has only layouts for A0 and A1 plan and scales 1/500 - 1/1000 and 1/5000. I tried to change the format to A3 and scale to 1/200 of one of those layouts in the set up manager but didn't get a good result while producing section sheets.
We just recently upgraded to Inventor Pro 2014. I have a user who has created a singled shaded view drawing. He want to print the drawing shaded. When he prints he gets a line drawing. It even appears like a line drawing when he previews it. He gets the same results when printing to Adobe. He said it printed properly in the morning yesterday and when he tried to print again in the afternoon it would not print shaded. He rebooted this morning and he still can't print a shaded drawing from Inventor. We looked at his printer settings and everything looks good. He is the only one in my department who is having this problem.
Dell Precision T7500
Windows 7 x64 SP1
Nvidia Quadro FX5800
16 GB RAM
When i am creating section sheets from multiple section views ,section sheet view port scale changes.I did set it correctly in my template.
For example it changs from 1:150 to 1:150_1
Then in section sheets scetions views are not displaying correctly.
When i change view port scale manually it shows correctly.But it should do to all sheets.
What should I do?
In model spacr multiple section views are showing correctly.
AutoCAD Civil 3D 2012 SP 2
Sri Lanka
I facing problem with broken out section command problem.Whenever i select the command and select view inventor tip occured ( # fef attachment).
When i select ok everything command get canceled.I created sketch on view and then select command then also same problem occurred.
Is there any setting for this command. or i am going wrong while using this command.
I have a drawing where I am cutting a section on one sheet and them moving it to another sheet. Is there a way to get the section mark/callout to state on which sheet the section resides?
For example instead of the section just stating "A" it would say "A/3" or "A/Sheet 3" or something like that?
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
In a drawing Is there anyway to section (and show the hatch pattern) on reference components?
View 9 Replies View RelatedWhen I do a section in a drawing, i always have to replace the letter a end of arrow.
Is there a way so the letters will always be at end of arrow?
I have an assembly were i want to exclude some parts in a sectional drawing view. I mean i want those parts should be visible in section view but should not get sectioned. And the remaining parts will be in a sectioned view. Is that posible or i may be missing something.
View 8 Replies View RelatedHow do I calculate the area for a section of an extruded profile and display it in a drawing note? I see how to add a field <AREA> in the text dialog box, but it comes up as N/A in my text box in the drawing. This is also the case for <MASS> and <VOLUME>. How do I get the drawing fields associated with the physical properties of the model?
View 2 Replies View RelatedIs it possible to scale the cross-hatching in a detail that was created from a section view so it looks better with the scale of a detail? If the scale factor of a detail is much larger than its parent, the cross-hatching is very sparse and detracts from clarity rather than adding to it.
View 2 Replies View RelatedI've just started to do some work with Inventor 2013 and I noticed that, when creating a section view in a drawing, the preview is always uncut and shaded. Even when creating a partial section, the preview shows the full, shaded assembly. I tried playing with the "Section View Preview as Uncut" setting in Application Options, but this doesn't seem to do anything.
View 2 Replies View RelatedWhen i make a drawing in inventor, in the Title Block, it says the title of the saved document in the Drawing No. section. So what i am saying is how do i get the title of the saved document out of the drawing number section and either delete it or get it in the Title section.
View 2 Replies View RelatedIs there an option in drawing mode to exclude certain parts from a section view.
According to ASME Y14.3 parts such as shafts, keys bolts and nuts should be excluded in sectional view. Its not just removing the Hatching, the part has to show completely.
The closest I found in Inventor is that you can exclude Standard parts from being sectioned. Some of my parts are not in the standard library.
I would like to have the option to choose which parts I want to section and which ones I don't.
When plotting from AutoCAD Map 3D 2013, after 7-8 plots, the programme crashes (with a warning to report the crash to Autodesk). This happens whether we plot to pdf or to the printer (HP 5500dn). This is happening to every user in my office. We print across a University wide network for the printer (which I think is using the HP Universal Print Driver), but the pdf creator is on each individual machine (no network needed). It's irritating when you are trying to plot 15-20 figures and have to keep re-starting AutoCAD.
The machines are Viglen, 64bit, Windows 7, 8GB RAM, 3.3GHz.
I'm having an intermittent issue with my publish command. So far the pattern seems to be on drawings with a larger number of sheets (last one was 15, this one is 7). When I get the publish dialog box, I'll set the number of copies to however many I need but it ends up only printing one set. It doesn't happen every time. Just with these two drawings so far. They have nothing to do with each other and haven't shared any data. The only similiarity is that they're both older projects that were started some years ago on previous CAD versions.
View 7 Replies View RelatedI design press tools. Is there any ways in inventor 2012, where I can have only one common sketch in zero height and extrude profiles in different heights. Like plate no 1 @100 to 120mm (in vertical axis. A 20mm thick plate placed at 100mm above zero plane.) and plate no 2 in 150 to 175mm height and so on.
View 6 Replies View RelatedI put in 3 seperate hole tables in a drawing, labeld one counter bore holes, one dowel hles and one jack screws. used the selection hole method and all the tags were the same starting with A1 ...
Any way to control multiple hole tables so they use different tag numbers
In my company there are a lot of standard parts with variations. An object can have for example a left and a right variation, or can have three a different heights. I've created and iAssembly with the different variations, in which every member has a different part number. I'd like to make an overview drawing containing all the variations of that object, so the user can easily see the options and can choose the one he wants. On the sheet I'd like to have views of all the different members of the iAssembly, plus a table of all the members with their part number. It was no problem to create the views and the table. But I have two other questions.
1. I want to show the name of the Assembly with the view. So I'd to have in the view a text with the description of the Assembly-member, which is linked with the Assembly. I've tried to use a balloon to tag the assembly, but this only balloons the parts of the assembly. (How) can I do this for the whole of the assembly?
2.When I make an overview of all the columns we use, I'd like to align all the views at the bottom of the view, so you can see that all the columns have different heights, and how they differ in relation to each other. When I align the views with each other, the alignment is done in the middle of the object, not at the bottom. Is there a way to choose what lines of the view must align with each other? Or a way to align the views to a line (for example in a sketch)?
I am currently working on a product where I want to make 2 part lists in my drawing of the same assembly. The first parts list has to view all the parts that are always delivered with our product, and the second one has to show the optional parts and features that could be delivered with the product.
I want both lists to be categorized the same way (comments, material, name), I want the numbers of the list to be chronological (also I don't want the second parts list to start the numbering at 1) and I want both lists to stay connected with their balloons.
Is there any way this can be done, like adding or removing part links to the list manually?
I have a drawing which is referencing a .ipn model, the .ipn model has all of it's trail line invisible however the drawing is showing them all visible. What I am trying to do is find a simple and quick way to turn off the visibility of ALL the trail lines in the drawing without having to pick out each one and ajust manually, The model .ipn is quite complicated and has many trails on it so I really need a way to turn off the visibility of these in the drawing.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
Is it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies View RelatedI am creating a template for our title block. We normally will have multiple assembly called out on one drawing. So I created a parts list without headings and built the headings into the title block. The first parts list I enter will anchor to my border, but when i enter the second parts list, it will not anchor to my previous parts list like I would like.
View 1 Replies View RelatedBeen trying to show multiple layers/coatings in my drawing for several hours now, and finally defeated,
I have a revolved part that's made of multiple layers -- aluminum, for example, with an anodized coating and then a paint on top. I need to make a detailed drawing to show how thick each layer is, and to that end, created the part profile, added an offset rotation for layer 1 and then another offset rotation for layer two. They're thus symmetric and in full contact, but separate, distinct layers. No problem.
Turning this into a precise drawing, however, is a bit harder, since all of the layers render into one monolithic revolution. I need to show those layers distinctly, like in the png file attached. Is that possible?
I need to create a adaptor to go from one 96 hole array pattern to a smaller 96 hole array pattern. The pattern gets smaller in both X and Y. This would go from vertical hole to angled hole back to vertical hole. One or both of the vertical sections could be removable to allow this to be a drilled part. The center section would be a solid block.
Since each hole will be at a different angle (in two different planes) it seems like I would need to create a separate plane for each hole and extrude from that plane. In addition to being error prone, this would take a large amount of time. Is there an easier way?
It would be straightforward to create a block with points for the large 96 hole array on top and the small 96 hole array on the bottom. Is there some kind of point to point method of creating a hole at an angle? A construction line could be drawn point to point but is there a way to make a hole from that?
I'm laying out a drawing with all tabletops used in our project for a linolium- fitter to set a price on covering the about 12 tabletops in total.
I dont know if this is correct English or if it make sense at all, but what I was wondering about was: Could you retrieve the total m2 of all the tabletops in a drawing? Or do I have to go back to the aim and get them one by one?
I found that I can right click a dimension in a drawing and select "Move Dimension" which then prompts me to select an alternative view in which I want the dimension placed. Is it possible to control-click multiple dimensions once to do this all in one fell swoop (e.g. I decided my view is too busy and want to move dimensions to a newly created detail view of that area)?
I'm using Inventor 2010
I am trying to verify the bending strength of a solid part. Need to calculate the section modulus on certain cross section. Don't know how to do it using inventor.
View 7 Replies View RelatedThe section view behaves strangely with the ‘section participation: none’ components
Invertor2012 sp2
Win7 x64
why my section is not parallel with my section line. I did constrain my section line in the section line sketch.
View 2 Replies View RelatedHow can I load multiple dimension styles into an Inventor drawing file without loading them into a template file?
View 1 Replies View Related