AutoCad 3D :: Sheet Metal Layout Development?
Jul 18, 2012tutorial on how to do a layout development ?
View 9 Replies
ADVERTISEMENT
AutoCAD Inventor :: How To Flatten Elbow Like Sheet Metal Development
Oct 30, 2012I have an elbow with a slit on the other side and would like to use Flatten feature in sheet metal. How do I do it? I tried but an error pops-up, what does it mean.
I have attach the file.
AutoCAD Inventor :: Sheet Metal Flat Layout Ellipses
Nov 13, 2013I have an issue with flat layouts, when a draw a round object such as a rolled punched plate it would be nice to have the flat layout show what the hole callout and spacing would be, however with the way i draw the model. the holes come out as an ellipse, attached is a document showing how i drew the model.
View 7 Replies View RelatedAutoCAD Inventor :: Flat Layout Of Parts (not Sheet Metal) With VB Macro
Mar 18, 2013I'm attempting to use a macro in Inventor 2013 I found on the Mod The Machine blog to lay out the parts of an assembly. They're wood (not sheet metal), and the purpose is to create a drawing/cutlist with flat views of all the parts for easier DXF extraction.
The issue is that not all the parts in our assemblies are created with the length and width on the XY plane. So, some parts are laid flat on the XY and some stand up straight. How do I modify this code to look at the XZ and YZ planes as well for length and width?
It's a bit long, so here's the link to the code.
AutoCAD Inventor :: Way To Pull Flat Pattern Layout Of Sheet Metal And Convert to NC1 File
Sep 4, 2013Where I work we do a lot of plate and punch holes in beams for rebar. Is there a way to pull the flat patteren layout of sheet metal and convert to an NC1 file. I can export to a DXF but then i must manually go in and make changes to the DXF in order for it to cut right on our plasma and laser tables. As far as punching holes and cutting beams any clues on this either? We were outsourcing our drafting work before but now we are switching over to in house. I have contacted our supplier of plate nesting software and it looks like they sell something but that means another license of it on another computer.
View 2 Replies View RelatedAutoCAD Inventor :: Sheet Metal From Flat Sheet To Rolled Part?
Sep 12, 2013A collegue asked me about this as he has been given a part to model and the details are for the flat sheet not the finished model. Is this possible in 'sheet metal'? I had a quick play but couldn't work it out. Im used to creating the finished part and 'un-folding' to get the flat pattern.Detail supplied below.
View 4 Replies View RelatedAutoCAD Inventor :: How To Cut Sheet Metal
Jul 14, 2012I just what to cut a sheet metal,
and I don't know how (see in Capture.JPG where i what to cut, and test.iam what I what to cut).
Where is the icon "project the geometry" ?
AutoCAD Inventor :: Sheet Metal Elliptical
Jan 6, 2012I need a flat pattern for this part but it seems impossible. STEP 2 illustrate the desirable result.
View 7 Replies View RelatedAutoCAD Inventor :: Sheet Metal Imprint
Aug 21, 2013Working with sheet metal and laying out a pattern for the cnc and was wondering if there is a way to imprint an extrusion onto the surface instead of cutting it. Mainly this will be used for a marking tool so the line type or layer would need to be different.
View 5 Replies View RelatedAutoCAD Inventor :: Sheet Metal Bin - Add Flange
Aug 8, 2013I am working on a bin type unit, and am having trouble creating a flange, I am creating the bin in the final product stage, then I will separate into manufacturer components. I am having trouble adding this flange around the top 4 edges of the bin. I need the four corners to meet on a miter 45. I will then rip down each seam and have 4 separate panels.
Is this a bad workflow? Is there a better route? I attached the part in Inventor 2013 format,
AutoCAD Inventor :: Unfolding Sheet Metal
Dec 18, 2013Attached are two sheet metal parts that we need to unfold and make them flat for a drawing. We cannot seem to capture the reference A or reference B planes asked for by the unfold command.
View 3 Replies View RelatedAutoCAD Inventor :: Perforation In Sheet Metal
Jan 27, 2012Is there a way to get the appearance of perforation on a sheet metal tube without having to create each and every hole? Looking for an appearance to drag onto the surface. Kind of like when you make a part look like it is made of brick. It being just an image on the model surface.
View 9 Replies View RelatedAutoCAD Inventor :: How To Model ACM Sheet Metal
Oct 20, 2011Very thin gauge aluminum sheets with a composite sandwiched between them.
The challenge is, the panels are relatively thick, 3mm or 4mm, but a router is used on the fold lines before bending to cut through all but the outer aluminum. This makes for a very tight bend radius.
So, thick 3 layer material, tight bend with mitered corners. Can Inventor's sheet metal tools handle this?
AutoCAD Inventor :: Sheet Metal Tools
Apr 17, 2013Can this part be made with sheet metal tools...it will be made from aluminum. I attach the shape made with standard tools and the sheet metal attempt.......how do add the sides in sheet metal.
View 4 Replies View RelatedAutoCAD Inventor :: Normal Cut In Sheet Metal
Sep 6, 2012how incredible it is that Inventor still does not have a functional normal cut option for sheet metal like Solidworks and Solidedge have long had and I agree. I realize that there are the standard workflows like using derive and thicken to get around this problem. However, for those interested, there is a way to make a normal cut (for laser/cnc) directly in the sheet metal part in many cases. It involves using a sketch to split a face and then using the resulting profile for a thicker/cut feature. I'm always interested in any other methods out there for obtaining normal cuts in complex sheet metal (for a clean dxf export). By the way, Autodesk, do you actually not have any plans of ever adding functionality in this area?
View 4 Replies View RelatedAutoCAD Inventor :: Sheet Metal Tabs
Feb 3, 2012what's the best way to make tabs on a rolled round ring. I got it done using unfold/refold option but I can not get sheet metal flat.
View 4 Replies View RelatedAutoCAD Inventor :: Sheet Metal Extents Add-in?
Jul 3, 2012I am using IV ultimate 2013
just found about this add-in:[URL]
But its not working for me:
I ran the installer, created a sheet metal part and hit rebuild all, it did not create any proeprties, also tried to manually create the properteis then hit rebuild, no go.
I also did a search on my hardrive for the ApplicationPlugins, and placed the sheet metal folder in all of them(there were 3) tried again noto.
The add-in also does not appear in the add-in manager.
Or is there different what to get the flat pattern dimensions in 2013
AutoCAD Inventor :: Cannot Convert To Sheet Metal
Dec 7, 2012I have just modelled a part with some faces and tried to convert to sheet metal to have inventor make the bends between the faces. However when trying to convert to sheet metal i get the following error message (Autodesk Inventor Professional Tip) - "This model cannot be converted to Sheet Metal because it contains features that have created multiple bodies. In order to convert to Sheet Metal these features must first be removed."
As the picture show the part only has 1 solid. Even when deleting all features except the "base" face I get the same error message or Tip as Inventor calls it.
AutoCAD Inventor :: Sheet Metal - Cut Across Bend
Dec 20, 2012I have a sheet metal door with a little bracket that gets welded to the inside lip through a cut-out in the face of the door. (see assembly)
I can't get the cut-out to line up flush with the inside lip of the door, as that is where the brackets gets welded to. the current aseembly is set-up the way I want, but I can't get a flat pattern on the door, becasue of the cut going across the bend.
I have checked off the "cut across bend" in the cut dialogue box, but this leaves a small (~1/32) lip in the cut-out and runs interference in the placement of the bracket.
Inventor Pro Suite 2013
Sean Farr
Product Designer at TESInc.ca
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
AutoCAD Inventor :: Create A Sheet Metal Jog?
Oct 5, 2007How can I create a sheet metal jog? Like the attached. I used a contor flange to creat this one, but I have to add a jog to an existing part and don't want to have to totally redraw it just to get the jog. I'm hoping you can add it like you can a flange.
View 9 Replies View RelatedAutoCAD Inventor :: Slice Sheet Metal
Nov 13, 2011I was designing a part which consisted in a circular sheet metal part with a hole in the center, and a bent rectangular radii-oriented section. The second feature is the one I want to give focus in this thread.
Take a circular sheet metal with a diameter of 30 mm and a thickness of 1 mm. Now, to achieve the bent section one would perform - in a workshop or any other equivalent - two parallel slices of about 5 mm in length with a distance from each other of 4 mm. The slice would start in the circumference and end somewhere nearer to the center of the disc, but not parallel to a radius (since its parallel to another slice 4 mm apart as said before). After the slicing was done, one would bend the section between the slices 90 degrees to any of the sides.
Now, in Inventor I couldn't find a way to do this. I couldn't just slice a line through the disc. I worked it around by cutting rectangles of 0.2 mm in width and with the length of the desired slices, and then using the folding command to bend it 90 degrees. Is it possible to perform this so called slices?
AutoCAD Inventor :: Cuts In Sheet Metal Part
Sep 3, 2013I made a part in sheet metal and used the Cut tool for cut-outs...i tried by using flatten Patern,draw sketch but this did not cut part...is there a more better way of making these cuts?
INV 2013
AutoCAD Inventor :: Interlocking Joints In Sheet Metal
Apr 30, 2013I have been trying to work out how to make interlocking joints in sheet metal parts. The attached screen shot is the only way I have found to do it in Inventor, but it is a cheat. One of the flanges is a 85˚ bend because if it were 90˚ it would give an error "Flange Body intersects with existing body or self intersects."
View 4 Replies View RelatedAutoCAD Inventor :: Sheet Metal Rule In Drawing
May 7, 2012I have setup all our Sheet Metal Rules to be all of our stocked in house sheet metals. The sheet metal rules are named like:
ALUM 5052 H32 1/2" (Part Number)
ST STEEL T304 3/8" (Part Number)
STEEL 44W 1/8" (Part Number)
etc.
And each rule has the proper thickness, material, and some standardized bend radius's. I've done this to introduce more uniformity in our designs, and to also allow the designer to put as much information into the model as possible, so that if someone else does the drawings, there is no question as to which material is used.
I now want to bring in the Sheet Metal Rule name into the drawing automatically. I can't seem to find a way to reference the Sheet Metal Rule directly from the drawing. What I need to do is pick a standard field in the i Properties (I used Stock Number), and put in =<Sheet Metal Rule> so that now the Stock Number references the Sheet Metal Rule, and then in the drawing I can just reference the Stock Number, and it will come in.
I don't like having to use the Stock Number as a middle man though, as none of our existing models are setup like this. Is it possible to reference Sheet Metal Rule in the drawing without having to use another field as a placeholder for the information?
AutoCAD Inventor :: Flanged Sheet Metal Parts
Aug 2, 2012I recently had an issue in adding flanges to a sheet metal part. The thread for that can be seen here:
[URL].......
The problem I am having now is with the size of the part. I need the linear distance from the bottom edge of a flange to match the inner diameter of my part. As you can see, this is not the case as it stands right now.
AutoCAD Inventor :: Find Sheet Metal Thickness?
Oct 24, 2012I am looking for a solid way of finding the Thickness parameter of a sheet metal part. I have tried two ways so far:
1. oCompDef.Parameters.Item(Thickness)
This works but if Inventor is installed with a different language pack like German for instance then it fails
2. oCompDef.Parameters.Item(1).Value
This also works but if the user started the part with a normal part template and then converts the part to a sheet metal part down the line, then this method fails.
AutoCAD Inventor :: Automated Centerlines In Sheet Metal
Sep 11, 2013Is there a reason a sheet metal "cut" isn't an option for the automated centerlines tool? Am I overlooking something? When I make holes in sheet metal parts, I draw the circle then "cut" it into the sheet metal. For some reason I can't find how to give those automatic centerlines on drawings.
View 6 Replies View RelatedAutoCAD Inventor :: Sheet Metal - Angled Tray
Jan 20, 2012I am trying to make an angled tray in sheet metal by am having some trouble getting it to work out. I was unable to find an example of this type anywhere. I tried doing it as a sheet metal part first then gave up, created a standard part and shelled it. My problem is ripping the corners.
View 8 Replies View RelatedAutoCAD Inventor :: Cannot Convert To Sheet Metal Part
Sep 16, 2013For whatever reason this part was not modeled as a sheet metal part from the beginning, but now we would like to convert it to one. But when the "Convert to Sheet Metal" button is pressed, an error message pops up saying "This model cannot be converted to Sheet Metal because it contains features that have created multiple bodies. In order to convert to Sheet Metal these features must first be removed". The only way I can get this message to go away is to delete all the features. This part is used in a few weldments, so I'd rather not have to redraw it, but I'm at a loss as to why it can't be converted.
Using Inventor Professional 2014.
AutoCAD Inventor :: Sheet Metal Gauge In Drawing?
Sep 20, 2012I have created a bunch of sheet metal rules for my different gauge thicknesses. Is there a way I can propogate the gauge information to my drawing so that if I were to change the gauge, that info would also update on my drawing sheet? The only thing I can get to work currently is to pull in the material used, but that doesn't include the gauge.
View 9 Replies View RelatedAutoCAD Inventor :: Custom Sheet Metal IProp
Nov 22, 2013is there a difference between <FLAT PATTERN LENGTH> <Sheet Metal Length> using them as custom sheet metal iProp? They seem both give correct output of flat sheet metal measures.
View 1 Replies View Related