AutoCad :: Convert DWF Into PDF And Keep Multi Sheets
Apr 8, 2011
Version: ACAD2009
Have a bunch of DWFs (because it's smart!), but company Netbooks assigned to Techs are Linux-based...Autodesk still won't support Linux w/DesignReview and company won't use FreeWheel (proprietary info, security, etc.).
SO, is there a FREE way to convert a DWF into a PDF, keeping the multi-sheets, and is there a way to batch convert? I'm a crybaby so I'd rather not have to go back through hundreds of DWGs to re-plot. (...although...I *do* get paid by the hour...!...nah...can't in good conscience not look for a smarter way!)
Is there any easy way to have sheet name automatically pull the "description" iProperty from the part that is on the sheet? It can be very handy in a multi-sheet drawing for each sheet to have a descriptive name in the browser, but the only way to do this (that I know of) is to manually change it.
I need to rename the sheets of a multiple sheet idw. This should be easy but for some reason I cannot change the sheet names. I get no errors it just does not change. Here is the VBA
'Open drawing document
Set oDrawingDoc = ThisApplication.Documents.Open(sPath, True)
'Set the sheets collection Set oSheets = oDrawingDoc.Sheets 'Cycle through sheets For Each oSheet In oSheets [code]......
shouldn't sheets marked as "exclude from count" not be counted?
I tried this in both 2013 and 2012 to see if maybe AutoDesk broke it, but it doesn't work in either one. This is easily reproducible for me, a file shouldn't be necessary. Just open up (or create) a multi sheet drawing. Go to edit sheet on one or two of them and check the "exclude form count" box. Now create a new iLogic rule and put the following line into it:
MsgBox("This is the number of sheets in the drawing: " & ThisDoc.Document.Sheets.Count, VBOkOnly, "Number of Sheets")
From all our parts of an assembly we made 1 IDW with multiple sheets. Now we want to convert this IDW to PDF's and in such a way that we have one PDF for each sheet, and each PDF files needs the same name as the sheet.
What if I have created 7 logo versions. I want the client to view these 7 versions as one file (maybe one PDF file with 1 logo per page). Each logo version is on its own layer in Illustrator right now. How do I convert each logo/layer to a multi-page PDF file? Since this is just for viewing, I don’t have to submit EPS files yet to the client.
We are creating a new company title block for the use in Inventor 2010 and AutoCAd 2010. It has initially been generated in Inventor and exported to AutoCAD. My problem is that all attributes that came over are now setup as multiline attributes and I can't seem to change them to single line. Therefore you have to open the multiline editor separately for every single item to make changes in lieu of just 'tabbing' through the values in the Enhanced Attribute Editor. This adds time and frustration and seems to be intolerable for some of my colleagues.
Is there a way to change the attributes to a single line in AutoCAD I'm just not aware of? I tried to find different settings for the export from Inventor but the options seem to be very limited.
I could probably go over this and create separate AutoCad only titleblock and border but that would kind of defeat the purpose.
We have an employee in our office that is kind of old school in some ways. That person has a habit of exploding everything possible in a drawing. Most of us create notations using mtext so it's easy to edit and manipulate. Is there a way to convert the single line text back to multiline after it's exploded?
I am trying to get the PDF macro to be hard coded to print all the sheets in an idw. I added this line (guessed at code basically), but it didn't work. Where do I find what the correct syntax should be for this code?
Is there anyway to create 1 PDF from a multi-sheet AutoCAD drawing other than merging several PDF's together. I can create a PDF of a multi-sheet Inventor drawing in one step?
I was wondering if there was a more efficient way to reference objects from different sheets.
Currently, I am using a method where I have a column on the left hand side of my sheet: with sheet number on top and "line" number on the bottom, as as sheet map. So when I have to reference something externally to the current sheet, I place one of those hexagons in the sheet with the corresponding location.
Is there a better, automated way to do this, as this can be frustrating to change when there is a slight shift and the line numbers have to be changed.
Is there a way to assign different dimension styles to different sheets in an idw. I have idw drawings with several sheets and use a couple of different dimension styles depending on what is on each sheet. I've created the dimension styles I want to use but I don't know how to assign a dimension style to a specific sheet. For now what I am doing is dimensioning, then as needed for the dimensions that need a different style, right click on the dimension and select new dimension style to changes its dimension style. I would like to assign dimension styles to specific sheets, is there a way to do this? Even though borders, title blocks, etc. are the same throughout the sheets, do I need to create different sheet formats to do this?
I would like to get a dwg file of the metric sheets, A0, A1, A2, A3, A4. I have seen these in the past, as a template in autocad but can't find them in AutoCAD2012. I need them with titleblock intact as I need to copy their format, and I would find it easier to just rearrange an existing sheet. I need the A4 as soon as possible.
I'm having an issue when trying to create the profile sheets on my first Civil 3D project. I'm supposed to use a horizontal scale of 1/2000 and a vertical scale of 1/400. When producing the sheets, I obtain 1/500 H and 1/100 V.
I am trying to modify the code Brian Ekins posted on Mod the Machine to renumber balloons across sheets. [uRL ....
It works great unless the item on the additional sheet is a sub-assembly. I believe it is because PartDef is declared as a PartComponentDefinition and there is nothing in the code to handle an assembly.
Dim partDef As PartComponentDefinition Set partDef = drawBOMRow.BOMRow.ComponentDefinitions.Item(1) partInfo(I - 1).ReferencedFile = partDef.Document.FullFileName
The Set partDef line was giving me a runtime error when it came to an assembly in the BOM until I added
"On Error Resume Next" at the start of the loop.
I tried changing the declaration to ComponentDefinition. It compiled fine, but didn't do anything. I think I'll have to add some duplicate code to handle an assembly in the BOM. Is there a better way to do this? Am I even on the right track?
I am trying to control the layer visibility on different sheets of the same drawing but have not quite figured it out yet.
We add a DXF sheet to drawings with flat pattern views to export to DXF for our laser. I wrote a VBA macro that adds the sheet, copies the flat pattern view and removes the dimensions to clean it up before creating the DXF. I am having a problem turning off the visibility of the bend lines on JUST the DXF sheet. I can turn bend lines and hidden lines off with this:
'Turn off bend lines and hidden linesFor Each oView In oSheet.DrawingViews 'Set the layers collection Set oLayers = oDrawingDoc.StylesManager.Layers 'Turn off all bend lines and hidden lines For Each oLayer In oLayers If Not InStr(oLayer.Name, "Bend Centerline") = 0 Or Not InStr(oLayer.Name, "Hidden") = 0 Then oLayer.Visible = False Else End If Next Next
but it turns them off on all sheets. I want to only turn them off on the DXF sheet. How would this be done?
Inventor Professional 2014 64 Bit Windows 7 Professional NVIDIA Quadro FX 4600 Dual Intel Xeon E5540 CPUs 16GB DDR3 Ram
I just upgraded from AutoCAD LT 2004 to 2006. The work that I have been doing requires that I insert Excel spreadsheets on all of my drawings. In 2004 it was quite easy to size the spreadsheet.
When you pasted it AutoCAD LT would prompt me for a size which would get me close and then I could drag the corners to perfectly fit the spreadsheet. With 2006 it does not prompt me for a size AND dragging a corner is not as easy. Sometimes it will not let me drag it smaller. I then have to use the scale command.
I created plan and profile sheets using the P&P tools. Then I created a new drawing and attached (XREF) the dwg with the viewframes in it. Then I set the viewframe layer to Plot instead of non-plot and I changed the color so that it would be heavy (we use CTB).
Then when I went to my PSPACE layout to try and plot, the viewframes are NOT there. The layer IS turned on, because there's a PLINE that I drew on that layer and it DOES show up. When in modelspace, the viewframes are there and the color did change as expected.
So why do they disappear when I'm on the layout tab?
The goal is to create a plottable sheet that identifies where each sheet is (I want to point to each viewframe and lable them C-101, C-102 etc).
I have to two sheets layed out in one drawing in Auto CAD 2012, a tilte sheet and the building plan. How can I send that to one PDF file (one PDF file with both sheets) using the 'DWG to PDF.pc3' option?
We use several different printers at our company, and one thing that I find really bugging is that I have to change the plot settings on each sheet, if the file has been worked on by someone else.
Is it possible (for example) if I've got 7 sheets set up, they all have an A3 drawing set up (correct extents, pen settings etc), for me to highlight all of the tabs and just change the printer? Rather than going into each sheet and manually changing them?
My requirement is i need a programme to print inventor sheets in to PDF by using PDF995. And this should be created each sheet will be seperate PDF.
It need to ask rev number. my file name should be like "filename-sheetnumberrevision", for ex 870525 is my drawing number. PDF file name should be 870525-01A
simple project, 2 story house, 4 generated elevations, file size 600k. ACA is very slow (+4min) to almost freezing up when trying to drag a view from the view drawing into a sheet. xml files match the drawing file. only way to get the views to drop into sheets is copy the traced over views into a clean non-generated elevation view drawing and create the model space views from there.
I am frustrated at the design of sheetsets. There is no way to "lock" sheets to a particular sheet set.
When I have a sheet open with a sheet set verything is great but, if I close that sheet and open another w/o closing the sheet set, the new dwg will associate all of its fields with the other sheet set. Is there a way to lock the sheets with a sheet set? OR is there a way to automatically close a sheetset that is associated with a a file or files when they are closed?
I am using acad 2011, and have noticed that when using the publish command, for more than about 15 sheets, it always drops one sheet, and duplicates one, so I always come out with the correct number of pages, but 1 is gone and one has 2 copies.
We often have drawings with multiple sheets.Usually the first couple of sheets are devoted to identifying components and where they should be placed. The remaining sheets provide details on specific components (dimensions, tolerances, etc.).
It would be nice to be able to reference (associatively) other sheets, so it is easy to find information on a component when looking through the drawing package. For example, add a note that says "See sheet 12", and have the 12 update if that sheet (or drawing view?) changes location in the package.
I'm starting to set up Sheets from our template but none of the construct is transfering except for dimension lines. The views are drug in from Project Navigator. Elevations are fine, but when the viewport window is made larger the construct isn't there. I've attached an example of what is supposed to be the floor plan.
I've edited the walls but that made no difference. They are set to start at 0". Is there anything I haven't checked? I'm supposed to go to contract with these drawings next week.
Any intelligent way of referencing the sheet with the parent view? E.g. i put a detail or section view on Sheet 2 from a parent view on Sheet 1 and want to reference from what sheet the view is taken from.
