I have been using Photoshop.
I went to load Photoshop and for some reason it stops loading at the opening screen at the: Reading Text Global Resources...Done.
It will just stop until I click the X to close the program, I have Window check for a solution, then it closes?
I am using CS>Windows Vista Ultimate>2GB Ram>Plenty of free disk space.
I've been using the photoshop for a little bit, everything was fine, then like many others i've got it hanging on the "reading global text resources" line. However, i've found the explainations on the adobe site, and several other forums. However, i CANNOT find the file that its telling me to look for. Im currently running a Vista 64bit.
They've said to find it in application settings, however i think on my computer it is program settings, which i found but there is no folder for Photoshop Just Acrobat and Updater.
For some reason my Photoshop CS 8.0 that I have had for years started freezing up and I have uninstalled and reinstalled, looked on C drive for prefs (no file found), tried to delete any new fonts that were uploaded recently (unsure how to locate all of them) and still not able to open and view my files/designs that were save as PSD. I downloaded the CS6 for a free 30 day trial to see if it would open, and yes it opened. if I purchase the CS6 will it freeze up as well? I was unsure if I purchased another version of Photoshop if it would be a waste of money and not open.
View 7 Replies View RelatedSometimes when opening CS2, it hangs when it reaches the " Reading Text Global Resources " This is an intermittent,
View 3 Replies View RelatedWell yesterday, I was using photoshop and everything was just fine but when I tried to open it today it began to freeze after the startup where it tells you what its loading...'Reading Text Global Resources' and i've looked around here in different topics and posts and i tried doing ALT+CTRL+SHIFT but that didnt work at all for me..
the whole thing just stops responding if i try to click into it and now its driving me crazy since I have a template due for a client of mine today!
after a serious virus attack Photoshop CS4 stops loading at message "Measuring Memory".
View 5 Replies View Relatedthe Photoshop CS5.1 that I have installed on my Windows 7 64b has stopped working. It still works on my other computer though. It starts up just fine, but when I go to Open a PSD file (which I have edited here before) nothing happens -- absolutely nothing! When I try to create a new file the same nothing happens. I sure hope I don't have to reinstall or something. I don't think I've made any updates to Photoshop, it just stopped working this week for no apparent reason that I can think of. I also went back and tried my CS5 version and the same thing happens.
View 8 Replies View RelatedWhen I try to menuload a .cuix on a machine that has UAC set to high, The menu group comes in, but the toolbars associated with it do not. I know this sounds like AutoCAD support but it is .net related as the .cuix is loaded through .net. The pull down appears OK.
If I manually set UAC to it's lowest setting then they come in, is there a reason for this?[URL]
Got a new Windows 8.1 PC. Successfully transferred all photos (about 12000) to the new hard drive. When I open Photoshop and use "get photos from files and folders", I can locate the pix but when I try to import them, the process starts then stops without bringing any to the organizer.
View 2 Replies View RelatedI have an intermittent issue with AUTOCAD 2012 on new 64bit W7 PCs.
The issue is that sometimes when first opening AutoCAD it stops at the splash screen and says loading template at 0%.
We have to stop ACAD.exe and restart the PC, sometime it'll be fine after a single re-boot, this morning it took 3.
This is happening (intermittently) on 3 of 7 new Dell PC's.
If it was an issue with the ACAD.dwt, which we're loading from a central location and have been using for years, I would have thought it would be a consistent problem, not an occasional one.
I am having in Photoshop CS2. I have had CS2 for over 2 years and have never had this problem. I am not able to open Photoshop CS2. I am getting a message that reads "Could not initialize Photoshop because a required resources text file is missing. It goes through a series of " could not load default contours, styles, custom shaphes because the file could not be found" before getting to the "initialize" window.
View 3 Replies View RelatedI have CS5. The bugs and broken features in AICS6, make it unusable in my workflow.
I am specifically concerned about the inability to drag global color swatches from the color panel to Gradient stops in the Gradient Panel. I use this method to update a gradient color because I find it MUCH faster than option-dragging to duplicate a stop color, then deleting the unused stop. Since I do this constantly, I find using CS6 very tedious.
How text style creation works. It appears that I can create a text style in a drawing but it is not session related or Global and I can switch between to Styles within a drawing but not outside within a new drawing. How do you create a Text Style that is available at any time and in any drawing. Is this generaly a system setting that is controlled by an admin.
View 7 Replies View RelatedBasically, we get documents from other people and we convert those to our formats to do our work. We use a font called Simplex, but sometimes their document is filled with, like, Comic Sans or something stupid.
The match properties command doesn't seem to change font, just size and alignment. When I use the font properties dialog box, I can set simplex as the font, but when I make new text, it still matches their comic sans.
So two questions: How do I change the default font for the document so that all new text is the way I want it?
And is there a LISP routine which will find all text and change the font property and stuff the way I want it? For multi-line and single line text.
Also note, I've tried selecting all the text and editing properties, but font is not one of the properties I can change. To change font, I have to edit every piece of text one by one. And then ONLY multiline text has the properties to change font. I don't even know how to change the font of a single line text object.
I need to get the position and orientation of the first and the last character in a text frame art, that is, I need its matrix.There are a number of functions in the API that is supposed; here's a snippet from the file ATESuites.h
Return transformation matrix of this run.The matrix returned spesify the full transformation of the given run. You need to transform the origin by IGlyphRun::GetOrigins() and
concat with ITextFrame::GetMatrix() in order to get the location of the glyphs.
ATEErr (*GetMatrix) ( GlyphRunRef glyphrun, ASRealMatrix* ret);
Hence, getting the matrix of the first character or glyph should look something like this:
AIErr
VMGetFirstTextMatrix( AIArtHandle textArt, AIRealMatrix *matrix)
{
ASRealMatrix frameMatrix, glyphMatrix;
ASRealPoint firstPoint;
try
{
[code]....
But the coordinates, either returned in frameMatrix (tx and ty) or the firstPoint are obviously wrong. It appears that they an offset which is allmost constant. The x-values are approx 7664 points too large (give and take a few decimals), and the y-values are approx 7893 too large (also give and take a few decimals).
I used the BEDIT command (editor) on my block to modify the text size then save the block editor changes. Then use ATTSYNC to perform the changes on all existing blocks references to resize the texts, but after i complete the ATTSYNC command, the text in all the blocks disappear.
View 2 Replies View RelatedI am jumping 8 versions to 2012. I've located this command but it changes the all text strings that match? I tried naming the block but that didn't work.
Gobal edit – Modify > Object > Attribute> Global. Command is –ATTEDIT –
a. Editattribute one at a time > enter N
b. Editonly visible on screen > enter N
c. Enterblock name specification > enter
d. Enterattribute tag specification > enter
e. Enterattribute value specification > enter
f. Enter string to change > enter text makingsure it is case sensitive
g. Enternew string > enter text
I have received a text that needs to be printed in arabic language.
So I need to turn paragraph to read from Right to Left. Where this function is hidden?. I've checked on web but can't seem to get this function in X6.
Are there any good tutorials on reading/parsing text files and databases out there? I've been looking around, but I can't really find anything.
View 12 Replies View RelatedMy Photoshop had been freezing up constanly ever since I updated to the latest version Now everything is a nightmare!
My System Info:
Adobe Photoshop Version: 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
[code]...
Attached is a dynamic block of a smoke/c.o. detector. I have a few of these on a floor plan and at times the entire floor plan needs to be mirrored. I would like the text itself to mirror as well so I don't have to select each dynamic block and mirror it again to read correctly.
I have mirrtext set to 0. I have read that creating attributes will solve this problem however I have created attributes in the dynamic block and I still cannot get it to read correctly when mirrored.
I have the following code which isnt quite working, it reads a text file which has a list of Names of images and their bottom left coordinates i.e. name x y etc. I want it to check for a name equal to that input then in this case alert the user it is found, eventually I want it to load the tile but for the moment where am I going wrong, also the lisp wont close the file and I dont know why.
(defun c:imi ()
(setq IM (getstring "
Input name of 2010 tile"))
(while (not (= "" IM))
(setq TILE (strcat "BM" IM))
[Code] ......
I'm setting up styles and trying to play spot-the-difference; I can't see any difference between these three settings.
View 9 Replies View RelatedI have the latest Macbook Air 13" (intel i5 1.8 mhz with 4gb DDR3). I downloaded a trail version of PS CS6 from the creative cloud. It worked fine but suddenly it began act wierd. Every 10 seconds the software stucks for 3 seconds (Rainbow wheel). My computer is brand new and nothing else is installed. I upadted the latest PS patch and download the latest OSX updates but it is still happening.
Update: This is happening mostly when I'm using the text editing tool... (I'm using hebrew fonts as well),
Just did a Photomerge of 25 shots.Note that over 100 GB (yes, you read that right, GIGAbytes) of scratch disk was required, not to mention easily filling my 16 GB RAM.
View 31 Replies View RelatedI have the following custom-built lightroom and photoshop machine:
-Windows 8 64-bit
-8092 Mb 1600Mhz RAM
-Intel i7 2600k Quadcore processor with 8 logical processors running at 4Ghz
-Corsair SSD that stores Lightroom catalog.
When I am creating 1:1 previews from a Nikon D800 (Huge 74Mb RAW files) Lightroom only uses about 25% of my CPU power (sometimes it tops out at around 50% for a second) and about 3.3GBs of RAM which results in relatively slow performance. Why isnt Lightroom using more resources? It barely is using the workhorse components I put in this machine. Ive added a screenshot from the performance monitor during the generation of 500+ 1:1 previews.
Generating 500+ Full 14bit RAW files from the D800 could surely benefit from using the computers' full computing capabilities?
I just built a new editing system and am exporiting a new project and my cpu sits at 58-65% usage and gpu at 2-6%. Ram usage is about 8GB. The file is from dslr .MOV clips to H.264 MP4 export, 1080P 30FPS 20Mbps CBR. Total lenght 6min 20 sec with warp stabilizer, contrast, sharpening filter, and neat video applied.As far as I know all of those effects are CUDA accelerated.Media is on my Raid 0 Segregate 3TB x2 drive (about 350 Read/Write) Scratch is on 120gb ssd drive, OS and Adobe CC on 240GB SSD. Both ssd's 500 read/write. Exporting to either os drive or raid 0 has no difference. Export time is about 25 min.
Are there any optimizations I need to do to speed things up or is this normal? I ran PPBM7 yesterday and sent in the info. I got the following results from the output file,
I/O time = 111 Sec 334.16 MB/S , h.264 Timeline = 208 Seconds, MPE gain 461/18=25.6 .
Below are PC specs. Everything is stock, not overclocked yet.
4930k, gtx titan black , 32gb ram 1866 , 650watt 80gold psu, 240 ssd os, 120 Ssd scratch, 6tb raid 0 for media, win 8.1 , premeire CC.
I plan to reuse many images and vector arts I've created. As of now, if I want to reuse an image or vector, i have to oepn the file and copy/paste image vector. Is there a faster way than this? Is there a manager I do not know of?
View 4 Replies View Relatedmy animation takes around two seconds to load within my browser. Is there a way to display a loading symbol such as spinning circle, that will show the animation is loading, then disappear once it is ready to display?
View 2 Replies View RelatedI'm the IT nerd and haven't used autocad before, but i'm trying to troubleshoot an issue with one of our users who is having this issue. From what I have seen, when he loads a drawing, I can see a whole heap of unidentified object messages down the bottom. The drawing loads, but it's missing all the text (mostly the dimensions).
He's told me that he can load it 4 or 5 times, and it will show up, but it fails more than it works.
I'm currently working on a site which is almost 95% complete. The loading time for the site is approx 7-10 seconds which seems to be slow. I have placed a preloader but that doesn't seem to be coming up while the site is loading.
Is there anyway to speed up the loading time. Like some code that will tell it load specific number of frames first and then load the rest in the background?
I have compressed the images that are being used but cannot compress further as they may lose the quality.I've got the preloader working and now it seems to be showing up while the site is loading. Is there any way to speed up the loading time.