GIMP :: Startup Freezing And Crashing
Jun 4, 2013
I experienced this issue with Gimp 2.6 whenever I had a lot of brushes in the brush folder. The only way I found to avoid the problem was to have less brushes in it. As a result, I never got to really use all of them like I had intended to.
The current version I'm using is 2.8. I updated Gimp because I saw the tagging system. I figured it'd be easier to locate the brushes I want to use. The program worked fine up until I added more folders to the brush folder to take advantage of the tagging system. Now the start-up freezes and crashes when it's updating the tagging cache.
In general, Gimp seems to get mad at me when I add a crap ton more than it's comfortable with.
View 4 Replies
ADVERTISEMENT
Jul 1, 2013
I've had Gimp 2.8.6 for awhile now but suddenly within the past week it has begun to freeze during the startup process. It will get to 'loading fonts' and then it will stop. I don't have any extra fonts, I've tried uninstalling and reinstalling several times, and I've also tried installing previous versions and then updating them but nothing seems to be working.
View 2 Replies
View Related
Nov 17, 2012
My Lightroom starting freezing recently. It says the program is not responding. I was on the phone with Tech Support two days ago. They re-loaded the program and I re-imported the catalog and it worked as usual, but today again the same problem surfaced; upon start-up of the program it locks up and if I click anywhere in the Lightroom window it says the program is not responding and whites out moments later a Window's message says the program is not responding giving me choices of "Close the program" or wait till it responds, which it never does. I see others that are having a similar issue with 4.2 . I have a Gareway computer with Windows 7 64 bit.
View 2 Replies
View Related
Aug 17, 2012
Windows did do an update. The 32 bit version runs fine and yesterday I had no issues with anything. I guess I am asking if the Windows update could have killed it. I have removed and reinstalled. I also pulled all my filters.
View 3 Replies
View Related
Mar 15, 2014
PremierePro CS6 was working fine until I updated an unrelated dll file for another (audio editing) program.
The file is a VST: Kontakt 5 8out.dll (Native Instruments).
Although PremierePro is suppose to be able to use 3rd party VSTs they usually crash for me so I export the audio, edit it, then reimport it.
How can I start PPro bypassing all plugins, then disable them?
View 1 Replies
View Related
Dec 7, 2012
I'm having a problem with everytime i try to use the copy,move or rotate command on my autocad 2012 i ended up with a delay and if i click the mouse it freezes and then say autocad not responding then it shots down.
View 2 Replies
View Related
Jun 18, 2013
I reformatted and reinstalled Windows 7 SP1 yesterday. Reinstalled CS5.5 Master Collection and updated through AAM. I can open Photoshop, but if I open a file, or try to create a new file, it crashes immediately, and this is the error info:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 12.1.0.0
Application Timestamp: 4d90cf71
Fault Module Name: nvoglv32.DLL
Fault Module Version: 9.18.13.783
[code]....
View 6 Replies
View Related
Feb 11, 2013
Running Windows 7 64 bit, has been fine up until a few days ago after I had a virus. I have uninstalled, used the photoshop clean up tool and reinstalled, still the same problem. CS4 is working fine but I can't get CS5 to work, it crashes on start up with the following details.
Problem Event Name:APPCRASH Application Name:Photoshop.exe Application Version:12.0.0.0 Application Timestamp:4bbc5b10 Fault Module Name:amtservices.dll Fault Module Version:3.0.0.64 Fault Module Timestamp:4b6004a6 Exception Code:c0000005 Exception Offset:0000000000088dba OS Version:6.1.7601.2.1.0.768.3 Locale ID:2057 Additional Information 1:42f3 Additional Information 2:42f36e6d42b7acab1a756482c3a16e17 Additional Information 3:a3a2 Additional Information 4:a3a2bc05e7527151873d6c51f844212f
View 4 Replies
View Related
Apr 18, 2013
Process: Adobe Photoshop CS5.1 [86573]
Path: /Applications/Adobe Photoshop CS5.1/Adobe Photoshop CS5.1.app/Contents/MacOS/Adobe Photoshop CS5.1
Identifier: com.adobe.Photoshop
Version: 12.1 (12.1x20110328.r.145) (12.1)
Code Type: X86-64 (Native)
[code]...
View 2 Replies
View Related
May 10, 2012
my adobe photoshop cs5 keeps on crashing at startup.It has been working fine until today after
View 4 Replies
View Related
Nov 21, 2013
The last two days I've been unable to open Illustrator CC 17.0.1 on Mac OS 10.9.
I've copied the crash message below.
I've tried to hold command, option + shift on startup to delete the prefs, but it doesn't even get that far. I've also re-booted in safe mode and this allows it to open (but then hangs and crashes)
Process: Adobe Illustrator [550]
Path: /Applications/Adobe Illustrator CC/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Identifier: com.adobe.illustrator
Version: 260 (17.0.1)
Code Type: X86-64 (Native)
Parent Process: launchd [269]
Responsible: Adobe Illustrator [550]
User ID: 501
[code]....
View 2 Replies
View Related
Aug 24, 2010
I started it up this morning and received the following error message:
After Effects Alert
Last log message was: <4431105056>
<DynamicLink> <5> /Library/Application Support/
Adobe/Common/dynamiclink/CS5/
dynamiclinkmanager.app.
I've tried rebooting several times, repairing permissions, repairing permissions in safe mode, running AE in safe mode, but nothing seems to be fixing it.
My info:
After Effects CS5
Mac Pro 2 x 2.66 Quad-core Intel Xeon
8 GB 1066 MHz DDR3
Running OS 10.6.4
View 3 Replies
View Related
May 18, 2012
I have a drawing that I've been working off and on now for a couple of months and is particularly large (48MB). I have finally put togther a concept in it which took me two days and when I tried to RENDER, AutoCad crashed. All is still when until I tried to reopen the drawing, AutoCad loaded the drawing until 99% and froze. I tried the .bak and that crashed AutoCad. I also tried the .bak from an hour earlier and that didn't work. Here are the steps I've taken so far:
-Opened drawing and .bak(s) in TrueView, converted to Standard, Opened the drawing in TrueView (no problems) and tried to open in AutoCad....same old issues.
-Tried inserting drawing as a block in a new drawing (crashed AutoCad)
What I can do? Everything opens fine in Trueview?? I can resort to older files but that would be difficult. Below are my computer specs.
Intel i7 980X Extreme
GeForce 460GTX SLI x 2
PC3-10700 12GB
Windows 7 64bit Pro
AutoCad 2011
View 3 Replies
View Related
Nov 29, 2013
I just bought elements 10 and it wont start; its crashing trying to open editor...I haven't had a chance to use it yet. It shows it's starting and then its not responsive. Now the program is completely unresponsive and not opening at all.
View 2 Replies
View Related
May 17, 2012
I get this error whenever I try to start the trial of VSx5 (Funny thing is, I am trying it because Pinnacle 15 is far too crashy for me.)
View 4 Replies
View Related
Jan 20, 2014
I just did the latest CC upgrade and my Illustrator keeps crashing. I use Astute graphics, so figured it may have to do with the plug-ins, but after Iremoved them from the plug-ins folder the issue persists.
View 2 Replies
View Related
Mar 15, 2013
I've never been into animation very much but recently, while making an avatar, I couldn't make up my mind which of the three chipmunks from Alvin and the Chipmunks I should put into it. I decided to try an animated gif and put them all in a constant loop one-by-one. How hard can it be, I thought.
Well, turns out it wasn't and here it is:
On paper, it works fine but in practise, it doesn't for reasons I can't fathom. I've tested it on three forums and on every one of them, it occasionally freezes in the last frame and refuses to execute the animation while other people's animated signatures and avatars animate just fine so it's safe to assume that there's something wrong with my gif.
Here are the settings I used while exporting:
View 2 Replies
View Related
Mar 21, 2012
I am having problems with Gimp windows freezing and the resize buttons disappearing. I am not able to move the windows around, change window etc.
View 1 Replies
View Related
Apr 2, 2013
It's probably something to do with the brushes 'cause when the folder (for the brushes) was still empty; Gimp started without any problems. And now, when the brushes are there, Gimp keeps on crashing. I'm 100% sure that this never happened to me when I was using the 2.6 version. URL....
View 2 Replies
View Related
Apr 22, 2011
I have just installed the Gimp 2.4.7 Mac Tiger PPC (with the Help Files) on an iMac G4/800, 768 ram, Nvidia GeForce2 MX (32mb). I was using 2.6.8 but this is obviously the right version for my computer specs. Just a couple of Gimp startup questions. How can I start the Gimp without the Splash Screen? Also, when the Gimp starts, there are 2 long, rectangular boxes. How can I get the "Layers, Channels, Paths" etc. box not to be part of the Gimp startup? Then, in the Main Menu box, I only want it to open only as far as the Paintbrush Configuration area. So when I start the Gimp, I just want the small Main Menu box to open.
View 2 Replies
View Related
Jan 23, 2013
Last month, I've been trying GIMP. It works fine, 2.8 one. But, yesterday, I just wanted to open it, actually the startup loads well, but somehow, stopped while attempt to loading fonts, so, I force to close it with task manager. And opening it again. My gimp startup doesn't load earlier, and suddenly loading fonts once the startup opened up. A little moment, my Gimp was not responding, and make the whole WINDOWS NOT RESPONDING. The only way I can, is just shutting it down, forced it, by plugging off the power source
little note, I'm running Gimp 2.8 inside of 32 bit windows 7.
View 14 Replies
View Related
Jul 19, 2013
Is this Querying all the plugins each time, normal? It takes quite a while to boot as a result. Great program otherwise.
[URL]
View 1 Replies
View Related
Aug 20, 2012
i run Gimp 2.8 on Windows 7 and when i try to open Gimp the startup loads halfway and then stops responding when it gets to 'fonts'.
View 1 Replies
View Related
Mar 5, 2013
I have a new (cheap) Lenovo Notebook that came preconfigured with Windows 8.
With some effort, I have configured it to have an administrator account and a normal user account.
Today I downloaded the latest GIMP and installed it on the administrator account. The program starts fine (albeit painfully slowly) and seems to run normally on the administrator account. However, in the normal user account, Gimp gets part way through loading and crashes as shown in this image:
what the error message: "The application has requested the Runtime to terminate it in an usual way" might mean?
View 7 Replies
View Related
May 14, 2012
I installed Gimp 2.8 for Windows tonight on an XP SP3 system and it hangs for more than 30min when starting (never completes initializing). Gimp 2.8 takes 50% CPU and 184Mb RAM and sits "Gathering Data" with no further progress. I end up killing the process.
I have uninstalled and reinstalled into a fresh directory with no change. I gave up and tried to reinstall 2.6 and get almost the same issue except RAM usage goes up to 550Mb and it sits at the startup screen.
View 2 Replies
View Related
Jan 21, 2010
When I start up my GIMP in windows, it indexes the fonts every first time that I start after a reboot.I am using windows 7, is there anyway to tell gimp not to index the fonts ?
View 14 Replies
View Related
Nov 6, 2013
GIMP 2.8.6 and 2.8.8 keeps crashing on me. This typically happens when I add an .abr brush.I have a couple in there already that work and does not crash GIMP, but whenever I add new ones, it does no matter what.
View 2 Replies
View Related
May 22, 2012
Every time I use curves on the new 2.8, it crashes out GIMP. I'm on a Mac.
View 5 Replies
View Related
Sep 2, 2012
I've been a GIMP user for a number of years now and it's always worked well for me, but since 2.8 came out I keep on experiencing crashes.
Some occur randomly, but the most common one is while attempting to zoom in or out by holding Ctrl and scrolling the mouse wheel. When I do this, either nothing happens, so no zooming (and moving up/down with mouse wheel doesn't work either), or GIMP just crashes, naturally deleting all my work in the progress. Sometimes just hitting Ctrl is enough to make it crash.
Starting GIMP through command line gives me this output upon crash..
View 4 Replies
View Related
Aug 10, 2013
My Gimp is crashing EVERY 5 - 10 minutes and already crashed umpteen dozen times already today! ANYTHING and EVERYTHING is causing it to crash! from opening up an image, using tools, changing visibility of layers, It has CRASHED at least once for EVERY action I can perform in Gimp! and it ONLY lasts 5 - 10 minutes until a crash! it EVEN crashes when it is dormant!
View 2 Replies
View Related
May 2, 2013
I just recently started to use Gimp on my HP, and it worked fine on Dell. When I moved my brushes over, it began to crash when it'd get to the Data load. I have over 1,300 brushes, some are ABR and most are GBR, but I separated those into folders in the Brush file.
View 8 Replies
View Related
