Photoshop :: Jagged Lines With Cintiq 24HD / CS5 - Other Programs Are Fine
Jun 14, 2013
Setup: Windows 7, CS5, CIntiq 24HD
I just bought a Cintiq 24HD and tested it in Photoshop CS5. Unfortunately the lines are jagged. (I'm using the brushtool and on my wacom intous 3 everything was fine.) This only appears in PS, Painttool Sai is fine and has great line quality.
At first I thought it might be the second monitor, as this was mentioned in forums, but I moved and unplugged it and nothing happend. I tried other solutions as well like unabeling windows tablet components etc.
View 7 Replies
ADVERTISEMENT
Jan 31, 2013
I have upgraded to Windows 8 using Adobe Photoshop CS6 (latest Dec update). I have the latest Wacom drivers installed (Nov1) and Photoshop does not respond to pinch to zoom and rotate and it recognizes my hand touching the screen as pen input when using the pen at the same time. Even without the pen I can draw with my finger. Others have reported this under Windows 7 as well. I have an iPad, I don't need this 4K screen to work like an iPad!
This did not happen with older wacom drivers and Windows 7. I need to know how long I am going to have to wait before Adobe acknowledges the problem and when to expect a fix for this. All of us with Photoshop and Wacom Cintiq 24 HD Touch are screwed at the moment. Most other programs are working correctly with both touch and pen (i.e. Painter 12.2, Sketchbook Pro, etc). Most users are resorting all the way back to CS3 with older drivers or turning off Touch input all together to get the pen to work.
View 8 Replies
View Related
Mar 20, 2012
Is it possible to use a laptop with a Wacom Cintiq 24HD as a dual monitor setup for Photoshop.....?
View 3 Replies
View Related
Jul 11, 2012
In Photoshop CS6 (64bit), when using the brush tool (with a brush with pressure sensitivity activated), I quite often get a line drawn at the max width selected, as if there was no pressure sensitivity. Everything goes back to normal after I start drawing another line, and happens again after a few lines. It's quite random.
I don't have this problem in any other software (Illustrator CS6 64bit, Painter XII, Sketchbook Pro, Zbrush, ...). I have already checked and I've found some other users on other forums with the same problem.
One example, with a picture of the problem: [URL] Another one, exact same problem: [URL] Some of those users seem to have solved their problem by installing an old driver (6.1.5r3), but they had that problem with Intuos TABLETS in the first place, not a Cintiq 24HD... I have tried that, but unfortunately the driver is not compatible with the Cintiq 24HD.
To test this out: I've been able to reproduce the problem 90% of the times I've tried. if I keep the pen at 1 inch from the display so that it's still recognized by the screen but it's not drawing, then wiggle it a bit, and then I slowly move to the screen and tap it (as if I was starting a line with very low pressure), the problem appears and it makes a large dot, as if there was no pressure sensitivity. As I said the test doesn't work every time, but almost.
This is an image of what happens when I try and make dots in Photoshop. These are done trying to push the pen with the same (low) pressure. The big ones are from when the issue appears: [URL]
I have tried the pressure test in the Wacom utility software and it seems to work fine, it never jump to full even when I try the method I've just described. In the diagnostic page of the Wacom utility software the pressure is always correct, even when in Photoshop there's the brush sensitivity issue.
note: I've already tried to completely re-install my computer + the Adobe software + the lastest wacom driver for my Cintiq 24HD, and the problem is still the same.
View 13 Replies
View Related
Oct 5, 2012
Re: 2D circle jagged lines, 3D model hidden jagged lines. How do i get smooth lines?
How do i get rid of jagged lines?
Circles and diagonal lines look rubbish when i am in hidden view which i use for simple 3d black / white (i think this is the best way?).
I have tried:
- viewres (1000, 5000, 10000, 20000 sightly better)
- regen
See examples.
square with jagged lines.fw.pngcircle with fuzzy outline.fw.png
View 8 Replies
View Related
Mar 15, 2014
I just upgraded from OS 10.8.6 to OS 10.9.2. All CS programs work fine except Illustrator 16.0.4. It keeps crashing.
View 2 Replies
View Related
Dec 12, 2007
when using Photoshop CS the lines are not smooth even when I use a ruler etc....have used a tablet for years so it's not practise but the software or something?.....I do have smooth enabled in the Brush Dialog box so that's not the problem. When I sketch in Alias Sketchbook Pro and Corel Painter IX the lines are perfect and smooth.......Anybody have a similar problem and a solution.....
I have already turned off double-click distance and have the latest Wacom Cintiq driver version 6.05 installed
My operating system is Windows XP service pack 2
View 39 Replies
View Related
Mar 27, 2014
After many years of using LR this is the first time I've encountered this issue (see 1st screenshot below). LR is scrambling my files. The affected raw files open fine in other programs, including adobe photoshop cc (see 2nd screenshot).
View 15 Replies
View Related
Sep 16, 2013
I printed it out and it seems a little jagged. I tried live trace but all the details were lost. I used a brush tool to trace it I know a pen tool would've been smarter :/
View 4 Replies
View Related
Sep 5, 2013
I converted a PDF-file (PDF/X-1a) into a Photoshop file using Photoshop CC and got fine lines over the picture.
Using Photoshop CS5, those lines will not appear.
View 6 Replies
View Related
Feb 24, 2003
I am designing a site that uses a lot of irregular shapes, but cant seem to get angled lines to show up smooth. They are coming out very jagged. Any idea how to smooth the lines out? Tips for Photoshop or Illustrator would be great. Thanks!
BTW I don't just want 45 degree angles, but all kinds of various angles.
View 2 Replies
View Related
Apr 24, 2013
today I had opened my photoshop file which I was coloring ( a comic page) I allready spend 3days on this comic and I just don't wanne start over .I was working on it in CS6, As friends suggested I had opened it aswell in CS5 to try if it works there but no it didn't. I also placed it in AI, but sadly again the ugly line picture shows up .
View 1 Replies
View Related
Jun 9, 2012
I am using a Mac, photoshop CS5
I created a path with Curves with the pen tool.filled it in with a color light blue.than I use the paint bucket to change it to dark blue.This is when the curved lines become jagged, not smooth, uneven.
View 3 Replies
View Related
Sep 20, 2013
How do you get rid of jagged lines in objects and text when you rotate them.
Anti aliasing is checked already and im not stuck on pixel preview.
When i burn a screen it comes out in my image
View 2 Replies
View Related
Apr 19, 2011
Normal
0
false
false
false
EN-US
X-NONE
X-NONE
MicrosoftInternetExplorer4
Below is a bitmap image that I would like to turn into a vector image using Corel Draw X4. The outer thin pinstripe is what I typically struggle with on things like this. I know there must be a quick and easy way to draw it, but I've yet to find it. What would be the quickest and best way to draw that pinstripe?
View 4 Replies
View Related
May 2, 2013
i've drawn a car's blueprint in autocad and tried to plot to see the result how the picture would look like if i tried to print it, but what i got was pretty horrible:
[URL]
Lines are very very jagged, the picture just looks bad. Viewres is at 20000. Why lines are not smooth?
View 4 Replies
View Related
Jan 3, 2014
My 2013 AutoCAD file needs to "regen" after just scrolling in and out once. I can't do anything because the lines are disconnected and jagged all of a sudden. This started a few hours ago after I drew a spiral staircase and blocked it. I noticed the lines were all of a sudden not connecting while drawing the stairs though. Is there a command that I might have accidently typed to change some type of format? or unit set up? I have been working on this file since September and this problem has never occured. The lines look fine from far away, but when you zoom in there's a clear separation. My snaps are on and they seem to be aligning when I click, but when you zoom in they're not touching at all. I've been googling for soooo long and can't find an answer. My units are 1/8" (Architectural) and when I check the dimension between the two lines it says it's 0".
View 9 Replies
View Related
Jan 24, 2013
I've been using GIMP for a few years (at beginner skill level). Ok, so I want to take this image (1st pic) and resize it to print on a tshirt. I downloaded the upsize plugin and upsized it. Thing is, it's now got jagged lines all over the place (2nd pic)
I've tried:
1. selection to path, then use stroke
2. blur image, then use curves from the colours menu
3. using the magic selection tool with feathering
none of these got it right.
Attached File(s) ar drone.jpg (8.37K)
Number of downloads: 11 AR Drone white.jpg (160.69K)
Number of downloads: 10
View 1 Replies
View Related
Aug 15, 2013
I asked a question a couple days ago regarding the effects of old style print. Although, I know a lot of it is done manually, I was wondering if it could also be done digitally in either Illustrator or Photoshop.
In Illustrator I created 10 brush strokes from a jagged pattern found in a vintage element to represent the scratch board or printing effect. In Photoshop you can kind of create the effect from switching to a Bitmap mode.
However, Photoshop is a pain to bend the halftone lines to fit the curves and they are all evenly spaced. Illustrator works better for laying ou the lines based on the tonal value, but using a brush for the strokes becomes a little distorted.
How to achieve the jagged edge effect show in this very simple image? The edges and lines are not all the same so I don't want to use the ripple tool in PS and the wrinkle Tool makes them too ragged.
I find it hard to believe this style is only accomplished through scratch board or printing techniques. Even traditional pen and ink doesn't really work like this. I find way too many images, free ones too, like the one below to have it be only done with scratch board.
View 4 Replies
View Related
Oct 17, 2012
This image appears to have jagged edges on all of the paths. I created outlines for the text and converted strokes to path, but i can not seem to figure out how to make the image's path edges appear smooth. The image above is a png file but the image still appears this way when i view the ai version in illustrator.
View 10 Replies
View Related
Oct 6, 2013
Just grabbed Scott's book from amazon and can't wait to get a better understanding about some of the tools I've been using. In the meantime I just noticed that I have some white trails or fine lines in an image I'm working on that appear after I have been moving things around and deleting sections etc.
It's no problem on a little image like this to run around with the brush to tidy it up and then fill white/transparent, but I'm wondering if there is there a setting or an order of working that avoids making the lines in the first place?I have filled the background in black to show the trails...
View 9 Replies
View Related
Nov 3, 2013
I've received two orders of CDs for a client, and in the printed artwork there are some flaws that have me wondering what to do to avoid this.
Files were submitted in PDF format with text converted to curves. I believe the artwork is then imported into AI at the other end before going to print.
Along the edge of an object with a drop shadow, there is a fine white line showing. On the two products with identical artwork, the line shows on different edges, but appears to be where the drop shadow ends.
In other spots, there is what I would call "scratches", where, within an image there is a fine white line. This is not an edge or overlap, so I'm at a loss for this.
In another place, one character in a word essentially did not print. So I'm wondering what my "best practice" would be to avoid this. Should I "flatten" everything when I'm done, essentially converting the entire page to a single 300DPI bitmap?
Should I include text in the flattened bitmap, or is it best to leave as curves? My gut says leaving as curves preserves maximum resolution, but does it matter if it is not being scaled?
I've never before had issues with getting artwork printed from PDFs. In most cases, I imagine the print is created directly from my submitted PDF.
View 1 Replies
View Related
Mar 8, 2013
I was wondering if there is some equivalent in Smoke to Final Cut's flicker filter, which I use frequently to eliminate flicker and 'buzzing' caused by fine lines, especially evident when HD is down converted to PAL for broadcast?
View 1 Replies
View Related
Mar 12, 2013
I have a collection of dxf files that open fine, but the plot preview (and the plot) has extraneous lines in it. Any way to clean up the plot image?
View 1 Replies
View Related
Oct 3, 2013
I'm in a drawing file and I have some straight lines that when I'm a little zoomed out they look all jagged, but as I us my mouse scroll wheel to zoom in, the closer in I zoom the jagged line segment start to come together into one continuous line again.
Not all lines look jagged just some.
is there a setvar for this or a video card setting or something?
View 4 Replies
View Related
Jan 20, 2012
When I drag out a circle, or use the node to curve the corners of a rectangle, the line isn't smooth. It looks like it's slightly jagged.
I'm trying to create a drawing which features the rounded edge of a playing card, with no luck. It simply doesn't look good.
View 9 Replies
View Related
Feb 24, 2012
Why is it sometimes a clipping mask produces jagged lines? I know if there's a dark background and a light one sitting on top of it, then this happens. is there a solution to clearing this out when applying a mask?? You can see in the screenshot I've circled where you see the jagged lines and in the layers palette you can see the clipping mask object.
View 37 Replies
View Related
Oct 28, 2003
I am wondering if it is normal for the lines to be jagged. Vertical and horizontal lines are straight but the angular ones are jagged, Stair step looking whatever you would call it. It makes the stuff I draw look like (edited) .Especially the low angle stuff.
View 9 Replies
View Related
May 29, 2013
I am making revision clouds on some record drawings. They come out all peachy, but when I save the file and reopen it, all of the wonderful little clouds change to jagged straight lines.
View 5 Replies
View Related
Nov 13, 2013
I've recently bought a Cintiq 24 HD screen tablet to work on digital art, but after getting it installed, when opening any Photoshop version, it crashes immediately.
I'm using Windows 7 updated properly, and also tried several Cintiq 24HD drivers. The versions that crash are CS5 , CS5.1 and CS6. The rest of adobe programs work just fine, but Photoshop shows a "Photoshop had an error and must be closed" message as soon as it boots.I cannot even see the interface.
Also, don't know if it serves as reference, but the video player VLC started crashing exactly in the same way as Photoshop, after installing the Cintiq. Strange that one of the best devices is crashing with one of the programs that are actually intended for.
View 1 Replies
View Related
Oct 2, 2013
Cintiq Companion's Pen is offset in Photoshop only, it works great in Sketchbook Pro and MS Paint, but as soon as you open and click in Photoshops window it becomes offset. Tried in CS5 and CC is there any way to fix this?
View 1 Replies
View Related
