I'm drawing an object (a crown) from separate individual lines that I've brought togther to form the drawing. Now it's complete, I want to now somehow get all the lines (nodes) to fuse together to fomr a single closed object or large shape so I can then fill it.
View 14 Replies
This isnt so much of a problem as an annoyance. When I try to make poly lines from connected single lines my procedure is as follows...
pedit, right click, multiple, select lines/objects, enter, yes, join x 3, esc
My annoyance is if i hit join once it will not make the lines into polylines, if i hit join 3 times or so and then esc it will.
It just doesnt seem that is right and I think i might be missing something. I have been doing pedit this way for a long time adn its probably finally time to figure this one out.
I have a shape created by three hexagons and they are abutted along edges. I would like to combine them into a single object and in doing so reduce the lines so that the abutted lines become one line. the reason is that currently they are processed twice along each abutted line by my laser.
I can use combine but this still leaves them as discrete editable shapes in node editor, so clearly the double lines are still there.
If I use weld I lose the lines.
I am trying to figure out how I can rotate many different circles (could really be any shape) aound a single point? For example, say I have 10 identically sized circles and want to rotate each one tangent to a single point every 36 degrees. Hopefully I am making sense and explaining the situation correctly. Is there a quick method using CorelDraw's tools/features to accomplish this task?
View 14 Replies View RelatedI have a table in an Access 2010 database which has 130 rows of records. Each row is assigned a drawing file name field and then the 6 attributes for the title block of each drawing. I am wanting a routine that will open a set of drawings, the set matching each drawing file name field record and populate the attributes in the drawing title block with the corresponding records in that row from the database table.
I have seen where multiple blocks in one drawing can be populated with an attached database but I want to populate several drawings with a single database that has several records. One row of records for each drawing.
I have a shape I've drawn with just lines, no fill or anything, and I'm trying to cut off part of it to make it flush with an adjacent object. Just trying to cut outlines, and remove the unwanted portions.
In the manual it says:
1.In the toolbox, click the Knife tool .
2.Position the Knife tool over the object’s outline where you want to start cutting.The Knife tool snaps upright when positioned properly.
3.Click the outline to start cutting.4.Position the Knife tool over the object’s outline where you want to stop cutting, and click again.
I do this and... - NOTHING. No cutting of any kind occurs. The entire object remains completely unchanged. I also tried using the "eraser" and all it did was nudge my lines around. Not quite what I wanted, either.
Using VB.NET
How to draw connected line arc line arc line and so on, given some points formatted in a file like this
easting northing radius
0 0
10 10 200.00
12 10 150.00
30 20 60.00
50 30 50.00
50 43 60.00
1640.42 1104.30 50.00
1770.20 1100.62 100.00
1850.00 1085.18 100.00
2002.61 1141.46
the output will be like this :
line arc line arc line arc line arc line arc line arc line arc line arc line
any way to delete more than a single shape at a time from a shape collection file, other like step by step with the option key? I have one collection with about 400 shapes and would like to save it to some "groups", like people, arrows, devices..
View 1 Replies View RelatedI assume there's some button combination I'm missing? All I know is I can connect a series of freehand lines no problem, but the straight line tool is not consistent operation with the freehand tool.
View 4 Replies View RelatedI'm working on a project that details with topo lines. I have the contours, however because I imported them as DWG's from sketchup they're a bit messy. Basically, instead of being one continuous line, their endpoints intersect and overlap, making it look very messy. Is there anyway I could delete these extra lines? I tried the overkill command to no avail.
View 3 Replies View RelatedIn previous versions of Photoshop it was default behaviour to affect the shape in the currently selected layer when using the Direct Select tool. In Photoshop CC it's default behaviour to affect all shapes (in seperate layers) within the selected area. I often want to change some anchor points on a single rounded rectangle, for example, to make it fit perfectly.
Is there any way, without selecting "isolate layers", to restrict the selection to the currently selected shape layer?
I'm creating a logo that consists of the word DIFFERENT in text and a shape, a dot (an ellipse) that I want to appear above the I and be vertically aligned with I.
How can I do this?The problem is that I can't see how to identify the point in the text - the centre of the I - to act as the target. I can't seem to get any of the Snap to Object tools to work.
I feel that I should be able to mark a specific point anywhere on a shape or an object and use those points to align.
I suspect that I could achieve the effect that I want by splitting the text characters up into individual objects, than I can align them more obviously but then I set up some other issues with kerning.
I'm working with CorelDraw X3 and want to fill text into a round shape, while keeping it's exact outline. Hence, cutting of parts of words and letters is fine with me as long as the shape is well-defined. Unfortunately when filling paragraph text into a shape, the automatic line breaks lead to a quite irregular shape regardless of font size.
As workaround I arranged a mask in front of background and text but this requires a square paragraph text which is larger than the background. Since paragraph text obviously cannot be cropped with other objects I made the mask size bigger and filled it white. When exporting my document as image everything looks neat, but there must be a better way to do this in CorelDraw itself?
I tried converting the paragraph text into artistic text and cropping this, which works fine for a few words and a small object. But I'm talking around 1000 words here, and trying to crop this artistic text leads to very random cropping results. I guess such a large number of objects and knots is too much for CorelDraw to handle!?
I'm coming from Fireworks.
A technique I use often in my ui work is to combine a texture with a gradient that fades the gradients color and the pattern to transparent.
In Fireworks, this can be done on a single layer with no mask. The transparency of the gradient affects the pattern.
This is not the case in Photoshop. I am wondering how I can accomplish the same thing in Photoshop, while keeping everything vector.
I just installed CD on my daughter's computer and her shape tool only allows for a free form selection by following the cursor in a free form way. My install allows for a rectangular click-and-drag type of selection. I see no options for this tool Is her install bad?
View 5 Replies View Relatedthat possible with photoshop
break apart a pice of text to single lines?
We recently upgraded to AutoCAD Architecture 2013 from Architecture 2011 and am having all sorts of intermittent issues with walls showing up as single lines in x-refs (even though the file being refrenced has been brought into 2013 and shows correctly when opened by itself). We are also having intermittent issues with the plans and walls themselfs showing as a single line. I need assistance on strightening this out as we have several jobs pending construction that are all having this issue in incosestant areas.
Additional Info: Windows XP Pro - 32 Bit
How do I create multiple lines of text in a single layer. Everytime I finish with a line and want to go to the next, I hit 'Enter', but that completes the text. If I click on the layer image again, then it creates another layer.
So basically if I have 10 lines of text, I end up with 10 layers of text as well. Needless to say, this becomes to much trouble if I have to center each line of text and add blending options to 10 layers instead of one.
How to convert a 3'-6" radius 4" OD single line 90 deg turn int a solid cylinder (90 deg elbow pipe fitting).
View 2 Replies View RelatedJust discovered the IMPRINT command... noticing that it will only imprint a single object at once.
How to enable the command to IMPRINT multiple lines onto a single solid?
Is it possible to break multiple lines at a single point without a gap along a perpendicular line??
View 6 Replies View RelatedThis is something that has bugged me for ages. Sometimes i have real problems making a circular hole in another shape. I would normally use 'back minus front', but when i do this a lot of the time Corel adds the nodes into the shape but it doesn't actually cut out the area. Hopefully the graphics here will explain this better.
So i want to cut the three white circles from the blue background, but you can see the results:
The odd thing is this doesn't always happen. If i just draw a square and a circle, and cut one from the other, it works fine. Also, is there an easy way to 'punch' out the nodes that it has left in there to make the hole in the shape?
What should I do to “Layer 1” (the single image) to get-rid of those Horizontal and Vertical lines from pattern? While repeating as the Background Image into the HTML page, those Horizontal and Vertical lines does not look nice.
View 5 Replies View RelatedI have a block which includes some Multiple lines attributes.
Now I don't want them to be multiple lines any more.
How can I change them to single line attribute?
In the block editor, the "Multiple lines" in the properties palette is gray out. I have create single line attribute and replace the multiple line attributes one by one.
Why don't make the Multiple lines property editable? This problem is since Multiple line attribute first time introduced.
Interesting thing is single line attributes can easily changed to multiple line attributes through the properties palette!
Trim tool errors when cutting lines with lines CorelDraw X6
View 1 Replies View RelatedI want to follow and extend the curve/edges of the image to make it look like this:
It is a vector image obviously and I want to maintain that, but is this something I can do in photoshop or illustrator?
I created a pattern in Photoshop CS6 for a project with shape lines which reside on shape layers. I want to change the line weight but after I create them it seems there is no way of changing the shape; even after I select line.
I can change the spread (uniform distribution) of the lines and lengh but not their weight. No matter if I choose all or just one of the lines which are all on the same shape layer the weight does not change. This does not make sense. [URL]....
Just need a simple conversion of a shape file into CAD lines.
View 2 Replies View RelatedI'm trying to create a solid black background for a logo i'm working on. From the image you can see, i'm wanting the space between the lines filled to create a solid black background behind the stripes in the logo. As well as the space between the circle and the inner line.
I've tried several options on the pathfinder panel. There's got to be an easier way than recreating the whole shape with the pen tool.
I am really new to illustrator and I need to know the answer to this question fast. If I made a weird shape with 5 different lines how would I fill it in? Nothing really happens when I select the lines and then select a color.
View 5 Replies View RelatedIs there any "view" that enables you to see the path/shape lines (not the fill, just the lines) that you have done in different layers?
I hate to keep switching opacity on and off to see where the other lines end and stuff.. I know you can turn of and on the paths with CTRL ALT H, but that is only for one layer.. and I want to see them for all the layers while Im working on one.
