CorelDRAW X3 :: How To Rotate Multiple Identical Circles (any Shape) Around A Single Point
Dec 4, 2008
I am trying to figure out how I can rotate many different circles (could really be any shape) aound a single point? For example, say I have 10 identically sized circles and want to rotate each one tangent to a single point every 36 degrees. Hopefully I am making sense and explaining the situation correctly. Is there a quick method using CorelDraw's tools/features to accomplish this task?
View 14 Replies
ADVERTISEMENT
Jan 6, 2012
I wanted to know if there is a way to add points/nodes to all the centers of all the circles in my drawing with only a few steps, vs picking 700 circles one at a time using( _point) command.
maybe there is a lisp for this?
View 2 Replies
View Related
Dec 6, 2012
Is there a way to have multiple elvations on a single point?
Such as with a top & bottom of curb.
I have tried to add a component to the style, assign the name as the control, and put in the elevation
I want, but you can't have multiple points with the same name.
View 9 Replies
View Related
Apr 5, 2011
Is it possible to break multiple lines at a single point without a gap along a perpendicular line??
View 6 Replies
View Related
Mar 5, 2013
How to rotate text in round shap?
View 1 Replies
View Related
Nov 11, 2011
How can I resize multiple (236) circles about their own centerpoints without resizing them each by each?
I´dd like to increase radius about 2-5%.
View 4 Replies
View Related
Aug 22, 2013
Any way to change the size of the circles that I made so that they all enlarge yet keep their respected positions. So for the example below, I would like to just enlarge the circles and not the rest. If I select all the circles and drag them to enlarge, they lose their position. Is there a way to do this? This script [URL] ...... doesn't work for x6 but I think it is what I might need, correct?
View 4 Replies
View Related
Jul 24, 2011
I'm currently sitting with the following problem in CorelDraw 11:
I have four circles, one inside the other, with the circles getting smaller towards the centre. I want the two outer circles to be joined and the two inner circles to be joined. Text will be placed on top of these circles and I want to cut out those sections of the circle which will be covered by the text. The circles will also be filled with different colours. Simply placing the text on top of the 'rings' is not an option as the there are also two logos on the right which cover part of the circle (the part which I want to 'cut' out).
I've tried Combine and the Knife tool but somehow I just don't seem to achieve my goal. This would be a lot easier to explain if I could upload a PDF of the image.
View 7 Replies
View Related
Jun 14, 2010
I'm drawing an object (a crown) from separate individual lines that I've brought togther to form the drawing. Now it's complete, I want to now somehow get all the lines (nodes) to fuse together to fomr a single closed object or large shape so I can then fill it.
View 14 Replies
View Related
May 7, 2013
I'm laying out cribbage board designs for export to .dxf. I've drawn the board holes as circles but for the dxf file what I really need is a Single Point at the center of each circle.
So, is it possible to make single points in CorelDraw X4? If so, is there a way I can put a single point in the center of 300 holes at once?
View 12 Replies
View Related
Feb 10, 2012
I have a shape created by three hexagons and they are abutted along edges. I would like to combine them into a single object and in doing so reduce the lines so that the abutted lines become one line. the reason is that currently they are processed twice along each abutted line by my laser.
I can use combine but this still leaves them as discrete editable shapes in node editor, so clearly the double lines are still there.
If I use weld I lose the lines.
View 13 Replies
View Related
Feb 11, 2011
I've got two trajectories from the bottom of two tires and I want to create a road surface, an object whose shape will match the trajectories, thereby creating a perfect shadow catcher.
The trajectories are virtually identical in shape and number of points because the two point helpers that created them were wired together. I've converted them into splines and messed with the loft tool, with not so good results. I ended up brute forcing the shape of the object into some kind of shape but I think there has to be a good, dependable way to do this in a program like max.
View 1 Replies
View Related
Oct 1, 2010
i have an assembly with 100+ parts that i have to show in my parts list.
my question is :
how can i add identical sheets showing identical view of the assembly but the ist page will show the first 50 parts and the second page will show the rest of the part list?
inventor 2011
vault 2011
View 6 Replies
View Related
Mar 20, 2013
I am in the process of organizing my Literoom images and filter displays MULTIPLE IDENTICAL IMAGES, under METADATA STATUS changed. .
Computer info - Literoom 4.3, windows 7, some 55,000 images on the hardrive, one catalog used.
When I go to folders, and click on J drive which holds these images, they all come up if filter is off of course. Now using metadata I search on a date, a camera, lense, etc. But I just want to find all of my images on a particular day. I can find those with no problem. My problem is that I may have 2 or more identical images display in grid and view as well as film strip. Looking up metadate status I find that these images are CHANGED. I understand that status, but there is no way that these multiple images would result from my work.
I searched for multiple files located in multiple folders - What is creating those multiple files, they are identical as to date, how they look, etc?
If I go to CATALOG, and work with the all the images there, found at the top of course, I get the same functionality, BUT THE MULTIPLE IMAGES ARE ABSENT.
It makes it difficult to keyword on images on a certain date, because of the multiple files.
Filters are NOT a powerful tool for organizing collections and keywords when this problem exists. My problem is not using filters, but understanding why multiple images.
View 1 Replies
View Related
Oct 22, 2011
I am creating an object that has four text boxes in an object that is about 2" x 4". When I do the merge, I end up with multiple pages, all 2" x 4". How can I now move those pages spaced about a larger page, say 11" x 17" so I can have positioned and print multiple 2" x 4" objects on the larger sheet?
View 2 Replies
View Related
Jan 10, 2012
I'm having an issue printing to a Panasonic DP-C322 PS printer. I send my image and ask it to print multiple copies. The result is just a single copy of my image. If I use the PCL driver, the image prints in multiples, as expected.
View 1 Replies
View Related
Nov 18, 2013
With a number of of paragraph text objects selected, the interactive rotate becomes increasingly sluggish in keeping up with my mouse position when dragging round. I've got a calendar artwork with 12 paragraph objects, and after I've let go of the mouse button, the screen will continue trying to update for anything up to 10 seconds afterwards, during which time I can't do anything.
View 6 Replies
View Related
Jul 17, 2013
iLogic code question concerning how Place iLogic Component and retain the ability to push parameters from the subassemblies to the parts after being renamed.
I have ASSEMBLY.iam containing:
SUBASSEMBLY-01:1.iam
SUBASSEMBLY-02:1.iam
and sometimes SUBASSEMBLY-02:2.iam
each SUBASSEMBLY.iam contains PART1.ipt and PART2.ipt which have variable LENGTH and WIDTH. LENGTH and WIDTH are entered manually at the SUBASSEMBLY.iam and are infinitely variable.
To transfer the parameters I'm using iLogic code in the SUBASSEMBLY:
Parameter("PART1.ipt", "LENGTH")=LENGTHParameter("PART1.ipt", "WIDTH")=WIDTHParameter("PART2.ipt", "LENGTH")=LENGTHParameter("PART2.ipt", "WIDTH")=WIDTH
Issue 1: When I place the SUBASSEMBLY as an iLogic Component, the parts are renamed to PART1-01.ipt which renders my Parameter transfer useless. What am I missing on writing this code so it can find the new part name?
Issue 2: I like the automatic renaming that happens with Place iLogic Component. Is there a better way to handle this automatically through Place Component -> Save & Replace?
Inventor 2013
View 1 Replies
View Related
Mar 15, 2013
I have not been able to find why multiple identical images are displaying in gridview when filters are applied. There is only one image in the folder. This obviously makes it difficult to apply images to keywords.
View 5 Replies
View Related
Mar 23, 2013
Lightroom 4.3 version. All updates applied. Windows 7 64 bit. Single hardrive used. No problems on disk. Memory 8 gig. Speed 3 MHZ. OK
Here is how I use filters. Select folders/SE:ECT drive letter where it shows number of images/turn on filters/select metadata/ use flat or hierarcy does not matter, select a date. No problem, all the images from the entire drive relating to a day display.
PROBLEM - multiple images are displayed in grid or filmstrip. Search of the hard drive reveals those multiple images do not exist. Now what is the solution ? Metadata status ALWAYS displays image changed always. Status responds correctly when images are displayed - no problem there.
When Catalog is selected as above, same results are obtained. Does not matter - raw data or processed images into JPEG.
I can't express this problem any better - all the details are there. WHAT IS THE PROBLEM? I need the metadata filter to use dates.
View 6 Replies
View Related
Oct 24, 2013
any way to delete more than a single shape at a time from a shape collection file, other like step by step with the option key? I have one collection with about 400 shapes and would like to save it to some "groups", like people, arrows, devices..
View 1 Replies
View Related
Sep 28, 2013
I'm trying to do following action using CS6 SDK:
1 Covert the selected path into chained circles
2 Fill the selected shapes with circles
All circles are of equal size, and cannot be overlapped each other.
View 3 Replies
View Related
Jul 1, 2013
I am using to export meshes to OpenGL ES for the Android. What I would like to do is place a rectangle with one corner at (1,1,0) and the other corner at (-1,-1,0) which represents the two corners of the Android screen in OpenGL ES. How would that best be done in 3D Studio MAX?
View 1 Replies
View Related
Jul 6, 2013
As a beginner i'm learning day by day how to use photoshop. Among the functions i 'd like to handle with there's the vanishing point (in the filter menu). However i can't modify the angles of my selection to change the perspective grid.
Take a look on this video at 03"57 (it is what i want to do): [URL] ...... Do i have to set something up before.
View 10 Replies
View Related
Dec 12, 2012
I want to find the tangent intersection point between 2 circles within certain conditions.
Circle 1 is r: 30 m and is fixed.
Circle 2 is r: 20 m and its position is inside circle 1.
Circle 2 can be moved in a given angle.
The question is: what distance should circle 2 move, to become tangent with circle 1.
View 4 Replies
View Related
Feb 8, 2013
I have created a brush that is meant to mimic stitching and i would like to be able to rotate one "stitch" or stroke at a time... ( i pasteurized the shape)
I have used Ctrl + Click on the Shapes Thumbnail to make a Selection and then went to Select > Modify > Contract and then I went to the Paths palette and from the drop down/fly out menu i chose Make Work Path and then. I Right Clicked on the Work Paths Thumbnail and chose: Stroke Path > Brush (chose my custom brush)
I manipulated the Path as much as possible to create the curves as needed but. I still need to modify the stitches . If i recall correctly i think i read somewhere that i can use a Marquee tool select individual brush strokes (that are a part of the same path) to rotate and/or relocate/move in general, however, i cannot seem to get it to work for me ... so, i am thinking i've forgotten a step or that i may be totally wrong.
Can i rotate a single brush stroke? is there a way to "ungroup" like in Illustrator or some other sort of Ps creature.
Above is an example of what i'm trying to explain ... all the dashes are on one path but i would like to be able to rotate just one at a time (like in the red circle). is this at all possible? i've tried to paint em all manually but it just doesn't end up looking nice at all.
View 6 Replies
View Related
Feb 15, 2013
I would like to know how I can produce multiple identical small images (10mm x 10mm) on the same sheet of paper?
I used to be able to do this in older versions of Adobe Photoshop.
View 6 Replies
View Related
Jun 24, 2013
Imagine a layer containing 10 squares, each square is isolated (none are touching). I need a quick way to put each of those squares on its own layer. Is there something already built in, or any plugin or action?
View 12 Replies
View Related
Feb 19, 2013
change all circles of a certain diameter in a .dxf file to points. I received the following lisp file. For the last 10-12 years it has worked great. We create many custom sized parts that could be cut on a plasma (utilizing the circles for holes) or punched, assigning a crosshair tool to the point. Now we are switching to a laser, and want to etch a crosshair at this same location. Our solution has been to draw the crosshair and copy to each required location. Sometimes this may be 20 to 30 locations. Now I would like to know if there is a way to replace all of these circles with a crosshair. This could be a similar lisp file, or an easier manual operation. I know that I can select all of the circles using the filter command and specifying the radius. But I don't know how to assign the 'crosshair' to these locations. (defun c:ctopt ( / ename cnt ss) (setq ss (ssget "x" '((0 . "CIRCLE")))) (if ss (progn (setq cnt 0) (repeat (sslength ss) (setq ename (ssname ss cnt)) (if (equal (cdr (assoc 40 (entget ename))) 0.025 0.005) ;use this line for a radius 0.025 +/- 0.00015 ;(<= (cdr (assoc 40 (entget ename))) 0.05) ;use this line for a radius of 0.05 or less (progn (entmake (list '(0 . "POINT") (assoc 10 (entget ename))(assoc 8 (entget ename)))) (entdel ename) )) (setq cnt (1+ cnt)) ) ) ) (princ) )
View 3 Replies
View Related
Sep 15, 2005
Shape making from multiple complex shape and path layers?
so i have few layers(all vector paths and shapes) .
now how to make a shape from all of that. every new shape is layer for itself. I need it for logo.
View 7 Replies
View Related
Nov 17, 2013
I am archiving numerous historic photographs by scanning the originals as high-resolution TIFF files. I need to rotate the scanned images slightly in Photoshop for presentation/archiving purposes but I am worried about losing some image quality.
To maintain loss less images, is it necessary to open my TIFF images as "Smart Objects" before rotating them? If so, this increases my file size many-fold on saving. Is there a way to maintain the approximate size of my original TIFF file? I am working in Photoshop CS4, Windows 7 64-bit.
View 2 Replies
View Related
