I would like to know how I can produce multiple identical small images (10mm x 10mm) on the same sheet of paper?
I used to be able to do this in older versions of Adobe Photoshop.
I am using Photoshop CS3, my printer is a HP Photosmart D5160.
I created something in A4 size (21cm x 29.7cm, 300 dpi). But when I print it using the borderless option. the printout always have about 10mm missing on the right hand side and the bottom of the page, as if the image is too big to fit in the A4 paper... I've tried with "scale to paper size" checked and unchecked. But still no help.
I made a small image with the image size of 95mm x 65mm, but the printout is 105 x 75....
how to create a greeting card using 2 images on a single sheet of 8x10 paper, then cutting sheet in half for 2 cards.
View 2 Replies View RelatedI am in the process of organizing my Literoom images and filter displays MULTIPLE IDENTICAL IMAGES, under METADATA STATUS changed. .
Computer info - Literoom 4.3, windows 7, some 55,000 images on the hardrive, one catalog used.
When I go to folders, and click on J drive which holds these images, they all come up if filter is off of course. Now using metadata I search on a date, a camera, lense, etc. But I just want to find all of my images on a particular day. I can find those with no problem. My problem is that I may have 2 or more identical images display in grid and view as well as film strip. Looking up metadate status I find that these images are CHANGED. I understand that status, but there is no way that these multiple images would result from my work.
I searched for multiple files located in multiple folders - What is creating those multiple files, they are identical as to date, how they look, etc?
If I go to CATALOG, and work with the all the images there, found at the top of course, I get the same functionality, BUT THE MULTIPLE IMAGES ARE ABSENT.
It makes it difficult to keyword on images on a certain date, because of the multiple files.
Filters are NOT a powerful tool for organizing collections and keywords when this problem exists. My problem is not using filters, but understanding why multiple images.
I have not been able to find why multiple identical images are displaying in gridview when filters are applied. There is only one image in the folder. This obviously makes it difficult to apply images to keywords.
View 5 Replies View RelatedLightroom 4.3 version. All updates applied. Windows 7 64 bit. Single hardrive used. No problems on disk. Memory 8 gig. Speed 3 MHZ. OK
Here is how I use filters. Select folders/SE:ECT drive letter where it shows number of images/turn on filters/select metadata/ use flat or hierarcy does not matter, select a date. No problem, all the images from the entire drive relating to a day display.
PROBLEM - multiple images are displayed in grid or filmstrip. Search of the hard drive reveals those multiple images do not exist. Now what is the solution ? Metadata status ALWAYS displays image changed always. Status responds correctly when images are displayed - no problem there.
When Catalog is selected as above, same results are obtained. Does not matter - raw data or processed images into JPEG.
I can't express this problem any better - all the details are there. WHAT IS THE PROBLEM? I need the metadata filter to use dates.
how I can clone an image to produce multiple images within the same document?
View 14 Replies View RelatedI run MacOS 10.9, Lightroom 5.3 and I print on an Epson R3000.
The first problem I had was that the images was printed on just a small part of the paper and it cut the images. I have attached a picture showing this. I totally reinstalled my computer and now it looks like that problem is gone (for now at least). But now the images are printed but much smaller than the paper I specify. If I specify A3+ I get something close to A4. Borderless printing on 6*4 looks to be working as it should but that's the only I managed to print so far.
I tested printing from Photoshop 5.1 and that worked fine.
I What I'm trying to do is take an image off the net (mainly Marvel and DC characters) and open them up in GIMP and making the "reverse" image of that file. So I will have the character twice, but when printed I can paste the two back to back and they both show the same image, back and front....hope that made sense.
Also, how would I put, lets say, 5 images on one sheet of paper? I don't want to print just one image on 1 sheet and waste so much paper. I'd like to get 4 -6 on 1 sheet of paper, print them out and glue them back to back for my paper miniatures.
I am trying to print 2 5x7 pics on one sheet of 8.5x11 paper. On the screen everything looks fine. I rotate the image, then uncenter the image to the top edge. I print the picture once, put the sheet back in turned 180 degrees, then print again. In previous versions this worked fine. Now, in version 11, it does not want to work. I have tried changing the size settings to custom 5x7. It still does not work. The image comes out 5" horizontally including a 1/4" border. Vertically, it comes out 5", no border. I am wasting a lot of paper trying to figure out where the problem is to no avail.
View 1 Replies View RelatedSomething just happened here. In the past, when I open any photo in Elements 10, the image would pretty much fill the space. the bottom edge of the picture would almost reach the bottom of the workspace...whether vertical or horizontal format. Then I would create a duplicate and hit either ctrl + 0 (zero) and the duplicate would be a nice large size. ( Double clicking on the little hand in the tool bar would also do the same trick).
Now , for some reason, the picture opens to maybe 60% of that size. It's way too small to work on comfortably. The duplicate is even smaller. When I hit the ctrl + 0 ...nothing happens size remains the same. If I pull on lower right hand corner to enlarge...it only enlarges the ruler and frame. Picture itself remains same small size. How can I get that back? I tried a system restore. that did not work.
How do you print multiples of a business card size picture on one sheet of paper? Tried using columns, but not printing multiples.
View 3 Replies View RelatedWhy does Revit open an identical sheet view when loading a family? I end up with the same view open twice.
View 2 Replies View RelatedI have hundreds of photographs to print ranging from 2x3" up to 8x10" and I want to print them all off on a 44" roll and cut them out individually.
All I want to do is point Photoshop to the folder and have it arrange the images in the most efficient configuration for printing automatically, allowing me to set the color management on the document and the dpi of the 44" wide picture before I print it.
i have an assembly with 100+ parts that i have to show in my parts list.
my question is :
how can i add identical sheets showing identical view of the assembly but the ist page will show the first 50 parts and the second page will show the rest of the part list?
inventor 2011
vault 2011
I have three layers each with an identical pattern out of which I am trying to make a bigger pattern (for textile printing). Everything lines up but there is a very fine white line between the images. I have tried feathering, blurring, masking and feathering, blending, anything I can find in the online manual and in Photoshop for dummies.
View 12 Replies View RelatedI have some large images that I would like to print at full size, which will involve tiling across multiple sheets of paper. I can't seem to find a way to setup tiling at the Print dialog or through Gutenprint.
View 3 Replies View RelatedI have a series of pics (approx 80) that I'd like to load into Elements, with each photo going into a single layer. I google'd a series of old posts where somebody used a "script", but the links are no longer working and that trails is dead.
View 9 Replies View RelatedI want to print multiple photos on one sheet in Photoshop Elements 11 I am using Mac OS10 10.7.5 I am using Photo shop Elements 11.
View 1 Replies View RelatedI am trying to print 4 photos on a single 5x7 photo sheet. Print Package seems to be totally unusable. I select 3 photos and can't position them on the screen. I select a 4th photo and it positions it on a 2nd sheet. I can't resize a photo by clicking the image and adjusting the size (like most other windows packages).
If I move a photo it seems to change format from landscape to portrait. I set Printer settings to 5x7 Glossy but whatever option I chose in 'Select a Layout' gives me a message saying The layout selected is larger than paper size - eventhough they're both set to 5x7.
If I select a photo and try and move it, it just duplicates the image somewhere else on the print page - and doesn't let me delete it or undo. I have selected 5x7 paper size and Layout 5x7 (4) but the review screen still doesn't show 4 photos positioned logically.
This task should take 5 minutes - I am now quitting after nearly 2 hours - which included reading many community issues of people trying to do this simple task and clearly having the same problems I have.
iLogic code question concerning how Place iLogic Component and retain the ability to push parameters from the subassemblies to the parts after being renamed.
I have ASSEMBLY.iam containing:
SUBASSEMBLY-01:1.iam
SUBASSEMBLY-02:1.iam
and sometimes SUBASSEMBLY-02:2.iam
each SUBASSEMBLY.iam contains PART1.ipt and PART2.ipt which have variable LENGTH and WIDTH. LENGTH and WIDTH are entered manually at the SUBASSEMBLY.iam and are infinitely variable.
To transfer the parameters I'm using iLogic code in the SUBASSEMBLY:
Parameter("PART1.ipt", "LENGTH")=LENGTHParameter("PART1.ipt", "WIDTH")=WIDTHParameter("PART2.ipt", "LENGTH")=LENGTHParameter("PART2.ipt", "WIDTH")=WIDTH
Issue 1: When I place the SUBASSEMBLY as an iLogic Component, the parts are renamed to PART1-01.ipt which renders my Parameter transfer useless. What am I missing on writing this code so it can find the new part name?
Issue 2: I like the automatic renaming that happens with Place iLogic Component. Is there a better way to handle this automatically through Place Component -> Save & Replace?
Inventor 2013
I have a problem doing a flange in a sheet metal.
I've attached a picture and the file for whoever.
inventor 2011
vault pro 2012
I am trying to figure out how I can rotate many different circles (could really be any shape) aound a single point? For example, say I have 10 identically sized circles and want to rotate each one tangent to a single point every 36 degrees. Hopefully I am making sense and explaining the situation correctly. Is there a quick method using CorelDraw's tools/features to accomplish this task?
View 14 Replies View RelatedCan't print captions in contact sheet with multiple photos in MAC OS Adobe Photoshop10
View 5 Replies View RelatedI have a bunch of photos that are duplicates -- exact duplicates, with the same filename and date taken etc, but stored in different folders.
The Duplicate Photo Search function finds pictures that look the same.
Why isn't there a function that finds photos with the same filenames and date/time? That way you could easily delete the duplicates.
My images after being processed in LR show clearly different colours in other applications e.g. Picassa on the same computer with properly calibrated screen by Spyder 4 Pro.
View 2 Replies View RelatedI've just finished scanning thousands of photos, and I've placed them in about a dozen different folders. Now I'm looking to edit them one at a time. So I call up the Organizer and open up the Editor area to work on the first photo.
Is there some kind of "Next" command ... some quick way to move on to the second photo in the same folder, after I've finished editing the first?
How can I scan multiple photos on my HP Photosmart 7520 scanner into Photoshop Elements 11 without scanning them one by one. I want to place multiple photos on the scanner and have the software select the multiple images and place them in separate files for processing.
View 8 Replies View RelatedIn PSE10 if it is possible to select multiple images and put a simple border around each of them ?
I use PSE10 to re-size multiple images and, further down the track, I then drop the re-sized images into word documents but I'd like to re-size them and border them.
I would like to resize multiple images unsin Element 10.
View 1 Replies View RelatedI need to print multiple copies of a single image onto an A4 sheet with crop marks around each image. I have tried "contact sheet" and "picture package" but this doesn't provide control over the image size and I can't get crop marks.
View 3 Replies View Related
